Yak rozіbrati charging pristіy apple. How to start charging from the phone Subscribe to the blog update

More and more often people have problems with going out of the charger to the attachment, but they get unacceptable inheritance, since it’s getting unhappy to charge the phone, there’s no alternative to the charger attachment. All types of breakdowns and repair of the charger attachment are clear from the current statistics.

And so, for the cob, the main reason for the trip from the charger to the attachment is significant, perhaps:

• Shaving the living wire of the annex;
• Poshkojennya block of the charging attachment;
• Razryv kontaktіv, z'єdnan or darts in the charger or blocking life;

The most common reason for going out of the fret of the charger is the opening of the internal wires or the connection between the plug and the block. In such cases, attachments can be added to the service center, or independently. We have a different option for daniy statty mi, like the butt we will be vicoristovuvati charging attachment with a thin plug from the Nokia company.

To repair the charger attachment, we know:

• Squeaky multimeter;
• Nіzh for wire rozrіzu;
• Soldering iron and solder;
• An insulating tape and a heat-insulating tube, which is in evidence;
• A skein of a thin medium dart for making contacts or parts;

First of all, who can I get started is tse poshuk poshkojen in the conduction of any contact information. Visually, it’s easy to get the wire out of the wire, but it’s a non-standard color, or a smaller diameter of the wire itself.

If they visually could not visually cut it out, then it might not be possible to cut the wire, but the defect is attached to the block by attaching it to a charging plug.

Start immediately before repairing the charger attachment... In front of the lead in the area of ​​7-10 cm from the plug, if it doesn’t come out, we can pull the plug back to the living block. It is not possible to lead the wires close to the plug or to the living unit, since it’s impossible to solder it back.

The distance is cleaned up from the isolation (the one on the side of the living block). Take a multimeter and set the limit to 20V. (For more details about those who can use a multimeter, you can get familiar with). Let the multimeter contact before breaking and cleaning the wires and inserting the charging attachment into the mesh.

If the multimeter will show whether it is a value, then it means a lot in a block of living and a dart is dumb. In our vipadku the multimeter showing 7V - tse means that the block of living is correct, so as it is nominal vykhidna sprung to attach it to such values.

Probably the same way with the plug of the charger attachment. Cleansing the wire from the insulation and inserting a thin layer of the contact wire at the inner part of the contact wire, so that it is necessary to accurately measure the nominal value of the plug with a multimeter.

The multimeter has a vibrating mode of dialing and torquing with one tip of the probe to one of the stolen wires, and with one tip to the plug, then to the inserted wire. If the multimeter has a sound signal, then it will mean that there is a spike between the plug and the wire, and the plug itself is a reference.

If the device is not equipped with a sound alert, then the plug is not correct and in your contacts, you can, you can. In such cases, you can go to the store and buy a new charger attachment or replace only the plug, or you can do it and repair it, not just at once or borrowed.

If you have a good reference plug, then you can replace it by simply soldering the new one to the old living block, while it is important to note the polarity, for the skin cord, you will need to solder all the darts behind these wires.

Ale inodі buvaє, scho kolіrna markuvannya vіdsutnє, in such cases it is necessary to include the charging attachment in the hem, and the new plug to the phone. It is necessary to bring all the darts of the plug to the wires of the charging block. Once the phone went into charging mode, then everything was done correctly. If it’s dumb, then minify the time of the wires until that moment, leave the phone and go into charging mode.

Take a full attack before soldering. If you have a tube for heat shrinkage, then before you solder, you need to do up to one of wires, if you solder the heat shrinkage, considering the polarity, if you want to wrap the same heat shrinking pipe.

If you have a full-length plug, then you will have to repair the old ones. For the sake of knowing it, carefully use a knife from the old plug of the gum pokrittya, when you do it, do not use the plug itself.

For a complete reversal of the validity of the plug. Includes a charging unit in the hem and a cord attached to the phone. Whenever everything is practical, insulating everything is connected and attached to the plug, a heat-shrinkable tube. When the charger is ready for use.

Ale buvah so, when the darts are thrown and the straps are turned around, it’s out of the way, then it’s in the end of the day that the wires of the charging unit will be self-destructed, having entered approximately 7-10 cm. It is necessary to clean up from the source of the wire, to go from the living unit, if it is necessary to see the manifestation of the disturbance. If it’s a nap, then it’s worth talking about the parity of the charging unit.

In our vipadku it was found that there was one conductor of the plug of the connections. It is visually foldable. The optimal option is to buy a new wire and solder it to replace the old one.

At the same time, it is so necessary to adjust the polarity itself, and so before soldering, reconverting the contacts of the wires, turning on the charging unit in the net, and the plug to the phone. Once the phone has accumulated a charge, then you can start before soldering the wires, if you need to isolate them.

As soon as the plug of the charger is attached to the table, it will be in the charging block. You can, the problem can be in the distribution of contacts in the middle of the charger attachment. If you need to correct the earbuds, you need to replace the charger unit with an attachment and convert all the darts and contacts for a clear cut. If everything is in order with them, then the problem of polarity is in the very block of the charger attachment. At the same time, if you are not willing to use electrical engineering skills, you will not be able to build up the charging unit. In general, you will have to buy a new charging attachment or bring old people to the service center.

Mabut, the very "ailment" part stylistic phoneє th charge attachment. compact dzherelo post-struma Unstable power 5-6V often go out of hand for some reason, because of an inequity, before mechanical breakdown as a result of unprotected stress.

Wim, replace the wrong charger with an attachment to know to finish it is easy. Having shown the analysis of the decal charging attachments of the young companies, the stench is all prompted to fill up with similar schemes. Practically, the circuit of the high-voltage block-king-generator, the voltage from the secondary winding of the transformer, which can be straightened and used to charge the battery of the telephone. Riznitsya, clearly polarized only in roses, as well as the very unprincipled indications in the circuit, such as the viconan-nya of the input lath vypravlyachya on a one-half-line abo bridge circuit, the efficiency of the installation is the basis of the robustness and інші дібниці.

So, what are the “types” of injustices? Persh for all the slid beasts of respect for the condenser. The breakdown of the capacitor, switched on for the straight-sided rectifier, reaches the level, and the output of the capacitor until the low-resistance post-rectifier is burned out, so that the low-resistance post resistor, switched on between the rectifier and the negative plate of the capacitor, is burned out. The Danish resistor, before the speech seems to be, is practically yak zapobizhnik.

It is most often to go out of order and the transistor itself. Zazvychay there is a high-voltage taut transistor, the designations "13001" or "13003". As a practice demonstration, when such a situation is present, it is possible to substitute for the replacement KT940A, which is widely victorious in the outgoing cascades of video amplifiers in the old days of television.

The breakdown of the 22 μF capacitor must be carried out before the start of the generation. And the switching of the 6,2V zener diode should be brought up to a non-transferable output voltage and the input from the transistor fret through the transient voltage on the base.
Possibility of the condenser on the output of the secondary vypryamlyacha buva nayrіdshe.

The construction of the enclosure of the charger is non-separable. It is necessary to saw, lamati: and then, as if everything was glued, wiggled with an izolentoy ... Also, charge the battery of the stylistic phone to fill it practically with a dzherel post_yayny struma with a pressure of 5-6V, with a maximum strum not lower than 300mA. Also, connect it to the cable from the faulty charger through a resistor with a 10-20 ohm support. And everything. Do not confuse polarity. Yakshho roz'єm USB or universal 4-pin - with the middle contacts turn on the opir close to 10-100 kilo-ohms (please, please, the phone will "use" the charging attachment).

I will attach a mobile phone or an attachment, to charge the battery, which will be charged by charging the attachment. The main reasons behind which you can get out of the way of the charging attachment of the offensive:

Shaving the wire;

Vyhіd from the fret to the charger unit;

Damage to the contact connection to the wire with the plug or the charger unit.

Even more often, the reason for the failure of the charger is by opening the wire or breaking the contact of the dart with the structural elements of the charger - the plug and the block. In this vipadku you can repair the charging attachment independently. The principle of using the charger attachment on a specific attachment is understandable for the repair of the charger attachment mobile phone Nokia (with thin plug).

To repair the charger, we will know:

multimeter;

Soldering iron and everything you need for soldering;

Isolation line and heat-insulating tube (also є in manifestation);

A small piece of a thin dart for securing the contact with the inner contact part of the charger plug (for a thin Nokia charger plug).

First step - tse poshuk poshkozhennya wire or contact z'єdnannya. The shrinkage of the wire is possible visually. Those places where they became a stringer lived, as a rule, of the same color and three of them are smaller in diameter.

As soon as a visual glance does not go into the power of the connection to the wire, then, better for everything, the charging attachment does not work through the ratchet of the dart in the unit of the plug. It can also be used to provide information and services, and also to provide information in the process of making a sale.

It takes 7-10 centimeters from the plug. If the contact is broken in the message, it will not be connected to the plug, it will be sent to the communication. That is, it is not possible to carry out the wire in the connection to the plug, so that it is necessary to have a small piece of stuff for the flexibility to wire the solder.

Clean the darts on the same part of the dart as before the charger attachment. Vіzmit and vibrate between vimіryuvannya post-life springs 20 volts. Remove the charger in the grid and change the value of the strap on the outlets of the charger attachment, so that on the stripped ends of the cord.

If it is used to show the meaning of the tension, then it should be indicated that the charger unit and the wires are not supplied. In this vipadku, showing 7 volts - the price is the nominal voltage of the given charger attachment. On this stage, it is possible to create a link for those who do not work with the memory through the broken contact of the providers in the message of attaching them to the plug. You can perekonatisya in tsyomu, ringing with a plug.

For the whole, like going out of the plug, insert a thin signal at the middle of the plug (it is necessary for the contact with the internal contact part of the plug).

We take a multimeter and vibrate dialing mode. With one probe, drive up to one of the cleaned guides, and the last one to the last contact part of the plug, and then to the plugged in. Yaksho prilad showing contact (explicitness sound signal), That is to indicate that the contact between these wires and the plug is not damaged.

I will rearrange the probe to the last cleansing guide, who by the way of the torch to the last part of the plug, and then until the release. When doty to both contact parts of the plug, the attachment did not see a signal, then the contact is out. So one of the wires is connected to the electrical outlet.

In this vipadku there are two ways: you can add a new plug, or you can remove the old ones. The first way is simpler and better. A new plug can be added to the repair shop for mobile phones or to the radio. You can, you have an old charger, in which there is no plug.

In this case, it is enough to solder a new plug to the charger attachment, touching the polarity. How to reconsider the correctness of the data of the wires (polarity)? As a rule, on the skin cord є. If you don’t get lost, then it is necessary to change the correctness of the connection of the wires.

To do this, plug the charger plug into the wall socket, and the new plug into the mobile phone. Attach the leads of the plug to the charger cord. As soon as the charge went on, then the guides got it right. If you can't charge your phone, remember the guides with a lot of fun. It is necessary to reconcile it in any way, to use the same color, because it is possible to avoid the same color.

The offensive stage is the connection of two cords. If you have a heat-resistant tube, then before soldering, put the ї part on one of the cords to solder. Solder the guides who are aware of the polarity. Insulate the dart offense with an insulating line, slide on the heat shrink tube. Reverse the charge status of the charger with an attachment.

If you have a lot of power to add a new plug, and you still want to reanimate the charger, then you will need another way to use it - repair the plug.

Know from the plug with a gumi (plastic) knife. At all, be careful, do not sleep, so you can sew the plug itself.

Step-by-step - solder the charger cord to the plug.

Reconsideration of the availability of the charger attachment. Everything is fine, insoluble guides, and a heat-shrinkable tube on the plug. Charging attachment ready before exploitation.

We took a look at the broken contact in the message of attaching the cord to the plug. It can be the same reason. One vipadok is visible.

They made a mistake, we changed the appearance of a spill at the outlets of the charger at the annex, out of the day. The wire of the charging attachment comes out of the charging block with a 7-10 cm attachment. The wires that go from the charging block to the attachment are cleaned up and changes the appearance of stress at the outputs. Reveal the springs on the input to indicate those that the memory is correct. Ring the plug in the way indicated. In this case, there is no damage to the contact.

The dialing of the charger cable showed that there was one of the conductors of the interruptions. Visually, you can't see the shit. The optimal option is to add a new one. Then solder it to the plug and to the charger block with an attachment, taking into account the polarity.

You will not be pardoned (especially if you dart the same color scheme) before soldering the wires, make sure to connect the charger plug to the phone. As soon as the charge went on, give the guides a ration. Insulate the darts in the soldering assembly and pull on the heat shrink tubing (wear is required on the wire before soldering). Poshkojennya is uploaded.

If the wires are connected, the contact of the plug is not damaged, then the charger unit is disconnected or one of the wires in the middle of the unit is connected.

Unscrew the charger unit with an attachment and wonder at the information provided by the provider. If all the darts are attached normally, then the memory unit itself is turned on.

If you have a charger unit, then, if you aren’t volatile in the field of electrical engineering, if you don’t know the reason for your trip, you’ll be more self-conscious about it. Repair of the charging attachment in a special service if you need more, no new charging attachment.

Correct operation of all types of car batteries, transmissions and periodic servicing: recharging and additional power supply. Surely, at the same time in stores you can vibrate the battery, as long as you don’t need to look at it, but there’s a lot of such attachments to reach the head. In addition to the water supply, for those who have a car with an extraordinary technology, they build up standard accumulator batteries and regularly use special attachments.

However, if it is not electric, the fix can be malfunctioning and it will be necessary to repair the charger attachment for car battery... The price can be built independently, as well as by handing over the "charger" to the professionals.

View charging attachments

Infection on the market is represented by a number of different adaptations, as they do not appear only for the name and price, but for the principle of robotics. Rozpodil can be seen in two areas: the special design and the specialness of the robot.

The first one will see:

• Transformers. Here, the design is based on a transformer, which reduces the pressure to the required level, so that you can charge the battery. So make sure to do the best and charge the car battery. However, the stench to finish off the thumps.
• Impulse. Here, the robot will be given an impulse re-revolution, which will interfere with the mensh above. Ale the obvious advantage of such attachments is the small size and size.

To adhere to the principles of robotic charging attachments for batteries in transport devices, then there are two categories:

• Attach the charging gear. It is easy to use thin wires, which are responsible for using the terminals to charge and the terminals of the battery itself. Effectively, it’s possible to charge the battery, and at the same time you can turn on the battery as the car battery is still being supplied to the car. The success is more obvious.
• Start-up and charging attachments. It is possible to see the appearance of more darts from the battery and the attachment of charging. You can pratsyuvati in two different modes, Yaki is changed by a special toggle switch. In one mode, the "charger" shows the maximum strum. In іnshomu vikoristovu for automatic charging. Vikoristovuvati can only be attached to batteries connected to the vehicle. As far as forgetting is concerned, it is possible to burn down the powerless children of the onboard system, or to find a few important details.

Repair of battery charging attachments

It is necessary to be smart, as a whole electric tool, as a choice for the singing scheme, to show its function. What is the hardest and the best pristy, what is more in the new functions, team foldable scheme robots. To that, not by the knowledge of electronics, not by the intelligence of the theory of robots, by picking and repairing the charging attachments of the battery, it is not varied.

However, some small independent repairs are still quite affordable. Especially, it is easy for the Viyshov to adapt to the transformer type. It is clear, yak vіn viglyadaє from the middle. For the whole of it is enough to take a twist, twist the bolts and take the upper one. You can beat her with it:

1. Power transformer. Allowing you to give a change in value and range of pressure.
2. Galentny remixer. Allowing koristuvachev to regulate sprouts.
3. Ammeter. Zdіysnyu control of the struma.
4. Old town. Tse chotiri diode, united at once. Suggest for directing the stream from the changing to the lasting.
5. Zapobizhnik. Pevna zahist from stribkiv springs in a hem.

How can it be possible to reconcile, poorly rozbirayuchis in electronics?

Perche, zapobizhnik.

In a different way, in the case of attachments, which often end up intensively and intensively, it is not easy to just come in and out of the way. It is necessary to respectfully look at the inside of the annex, and to reconsider, how to keep the darts up to the top. If, in visual inspection, wires are seen, then you need to solder them on the microscope. As a matter of fact, in some cheap "Zradnik" you can pick up plastic there, it’s bad to go. For the butt, once it was repaired the charging attachment for the car's battery, all the middle of the same one, which had been screwed up to the plastic one. Naturally, it is plastic, vreshty-resht, melted and one-time place from the heat-and-water plate.

On a whole lot of possibilities self-replacement of parts for a simple upholstery, it usually ends.

As far as the knowledge in the electronics is great and in the mind, as you can use the tricks of the test, then you can go to the distance.

1. Reversed input. Idemo udovzh along the dart of living and it’s known that it’s easy to get to the power transformer. At the end of the day, the problem is frozen, and by themselves, the wrongs of the cable of the living and the foreigner are taken into account.
2. Overwhelming the wickedness. Now there is a dimo from the side - wondering why we should dart towards the battery. Change the multimeter to the mode of changing the strum and inverting it. Shvidshe for everything, there will be problems.
3. Reconsideration of the quality of children and galents. For the whole it is necessary to freeze the resources at the entrances of the old town. It is due to the result of a change in the given mission, the view of a visnovok is an inadequate remix, for there is a disparity in a diode. The other person will have to spin the whole place and transform the skin diode okremo. Yak tilki z'yasuєatsya, which itself is not good, will need to replace him for tsіliy.

At the zahalny and the whole, to the skin and from the battery charging attachments, the scheme of the robot is added. People who can read the scheme and reason zagalny principle the function of the system, in a number of types, you can independently repair the "charger" of the battery.

As far as the singing knowledge in electronics is not, then such robots are not vivid. The price is not only a risik for charging annexes, ale and a risik for health. It’s more simple to turn up to professional electricians, who are melodiously faster and clearer to deal with the problem.

Most often, the reason for unstable robots and generally inconsistent technology is the breakdown of the living unit, as we speak about the attachment of the living unit, such as a laptop or a TV set, or a monitor of small diagonal. It’s not easy to buy a new living unit, and it’s a problem with such a rank. However, it’s so, but buying a new business unit is not a trivial task itself, but it’s very difficult to find a solution. service centers virobnika for the part of the new living block to go beyond your statement about intelligence.

In this way, the repair of your living unit will allow you to spare your money, up to 1,500 rubles, depending on the laptop model, the nature of the breakdown and other factors

The part of our services for the repair of the current units will be repaired at 400 rubles.

For the case, the part of the new living block is 1000 rubles. First of all, if you want to know that you will know it for sale.

From our knowledge, the virobniks have a great "assortment" of types of plugs, springs, straining, and intellectual needs in all the middle form accessories.

Apparently, due to the urahuvannya of the current realities, there is a large part of the blocks of the Viconan's living in the format of the glued ones, or they are poured into plastic, disposable attachments, but do not allow themselves to be entrapped in the middle. To that, without deyakoi to waste a lasting sight, the repair of such blocks is the life of the ill-fated, ALE: we will start talking about the final result for a long time. I'm not particularly bad for youє zovnishniy viglyad living block, because you have no choice, we can see your problem for a reasonable fee, and at the very least.

In addition to repairs, we can also replace the original production unit of living for any one I will add. If it’s hard to buy such a reason, it’s impossible to buy it, it’s crazy for you, it’s guaranteed not to overwhelm the characteristics of your annex.

Okremo, I just want to sell at once, even more so-called "universal" blocks of life, so there is a "set" of smart roses: tension regulator, polarity changeover, and to navigate USB views, "about all kinds of things." Such annexes need to be duly respectedly connected, it is not a matter of vikoristovuvati such blocks of living permanently! On the right, in order to maximize the efficiency of the whole auditorium (and this is not a "universal" bp), they are also averaged over all parameters - both in terms of electrical and mechanical (size and shape of roses) on the very right, do not really go to the annex with the smell of a bit of crazy. Such blocks of life are a price-sensitive emergency option, albeit post-vikorystannya call to bring up to accelerated wear of batteries, as we are talking about laptops, and until a rose from the side of a pet add-on.

Apart from the new living blocks, they will be repaired, whether they be internal blocks of living in any outbuildings. For example, in TV sets, monitors, computers, DVD programmers, game consoles, music centers, And use humidifiers and cookers.

Part of the repair of the internal block is more expensive than the last one, the price is tied to it, so you need to add a lot of money, and it will be repaired for 700 rubles.

As soon as your pristіy doesn’t turn on, or turn on every other time, for the last time it’s turned on and turned on - it’s better for everything, the reason is the unjustified blocking of living. Come, we can solve the problem, for an admirably modest part!

Himself rechargeable battery... It’s like a video camera, a game attachment, or a laptop as a whole, without a battery, it’s very important to use them. Virobnik, yes, yes, you can change the new batteries to your outbuildings, if you put them on sale, even if there are such "accessories" you can invite the enemy to bring you the smilinest way.

The most popular budget and simple solutions: updating laptop batteries, video cameras, game consoles, and other add-ons, replace the battery elements with new ones.

It went like that, stretching out for a month two ancient Chinese exercises were carried out. Moreover, there were no symptoms or tendencies to the importance of the charging robot. Just at one fine moment the phone stopped charging.

I wish the attachments were not so expensive, it was impossible to know the reason, through the smell of the stench, after a short time, they stopped working.

Cheaper Chinese charging is unbreakable, so it goes in a molded case. And if it is necessary to get to the payment for the attachment, then the housing must be brought in or out. The most efficient and accurate option of disassembly є distribution of parts to the body. Tom takes a knife for metal and for cola vidpilyuєmo upper part, Scho іmіtu kryshku.

Let's get a fee for the case. Everything is robustly accurate, so do not break the details and do not post the road.

Now you have a visual look around, pay for the offense of the sides for the discovery of roads and details, which are known in the way of high temperatures. short confusion for robots details with rewired.

As a rule, in times of strong heat and low details, you can see the soot and color of varnish appear from the outside color. The electrolytic condenser (baryl) at the upper part can be blown out.

If there are no visible ruins on the plate, then, better for everything, the charging circuit is "alive" university submission, Yakiy є a weak man.

On the right, in order to reduce the cost and automate the charging of the charging attachment, the virobnik by simplifying the supply of a spring to the input and viewing of the wires, to get the input and pay with the metal shears (I saw it), which are included in the charging.

Contact pads are stained on the board, and the board itself is jammed with spring fixators and metal clippers. For strumming, the board is pressed by its contact maidans to the fixators and to be in the locked position between fixers and metal haircuts.

Infection, like nicholas earlier, the number of gadgets per person has reached the maximum value.

Telephones, tablets, laptops, різні childless garnituri- all the tse is a great number of technology, it is possible to keep it alive and, obviously, charging it up to the new one.

Your phone won't charge from the charger - how can it be done?

Often, you can take charge with you in the village, or the stench took up a minimum of time, and twist the cords with a stretch and stretch.

It’s in my heart to shave the wire to a practically uncomfortable assessment, and the inconvenience of charging. Yak times shaved in the cord- tse nayposhirenіsha breakage in such types of attachments, і wikidati yogo through tse, honestly, it seems, Skoda.

So, you can buy a new one, and don't worry, if you just attach it outside the box, for example, an old model phone, then you can't expect to know such a charge. And on the "flea market" you can get a block with the same problem, that one will not need it.

To that, the repair of the charger annex is on the right side and on the right.

Yak put a charger for your phone, smartphone, tablet with your own hands

Lower, in the whole statti there are descriptions of simple and not in the form of a special installation of methods of repair, which will give your charge to other life.

In the photo - charging with a problem in the cord.

If you don't have a shave, you can see it with an indelible eye. Win can be found in the main (upper) isolation and become practically uncomfortable.

Ale, as I show the practice, the turning point will occur most often at the entrance to the block, or at the base of the plug.

I will shave off the mice, I will turn on the charge to the phone and turn the cord in the middle of the day.

Yak tilki you whack, so the charge was "gone", that means in that moment, they broke it at the moment, and shaved it off.

In the whole vipadku, respectfully wondering, evils and shaving the bulo can be seen without collapsing. Win yak raz viyshov at the entrance to the living block.

The main problem in the repair of such blocks of the field is that they are not installed. For those who want to get to the electronic payment, it is necessary to show the accuracy and deeds of the Zusill.

Vikoristovuchi wikrutku and nіzh, it is necessary to add food to the back of the house and іїї.

Pidchіplyuvati slіd in the middle of the cord entrance to the attachment. As soon as the input is zanadto shchilny, you can easily make a gum clamp.

The robots are necessary neatly, so that you do not need to create wires.

Podkovirnuv vikrutkoyu, namagaєmosya pіdnyat kryshka up the hill.

You can eat in such a way that it’s trivially navpil, a little more often, as in the whole vipad, the Krishka was angry again, without a shit.

It can be seen that she has a blowout, and in the case of the charger there is an attachment for them.
Tse means that you can put the crack on your place without the glue for the repair.
If the Krishka is aware, it will be necessary to draw a board from the body. So how can you "sit" in a social way, by the way, you can use a wicker. Lean against the wicks about the case and having buried it at the end of one soldering point, the vityaguєmo board is called.

Attach the body so that, when inserted in the middle of the plate, the input contacts are connected to the clamps of the pins of the plug. If the board is inserted back into the case, it will take a moment.
The photo below shows the board with its own "insides". Soldered wire from below.

View from the protylezhny side.

And the axis in the photo is a driveway for incoming contacts.

Provid will happen to form lower than that mission, because there is a problem. Ale is very important to remember, like a dry "+", and like a "-". For some people, the darts may have a distinct color, the chervony is a positive one, and the black one is a negative guide.

With color markup, you can easily form it, but you can simply solder the darts, depending on the polarity.
In our vipadku darts are one-color, ale as the cord is flat, it is possible to quilt from the side of the cord to the minus, and from the cord to the plus. Pomititi, well, and then also obr_zati.

Do not let go of the mitts, clean and tin the darts on the cords.

Solder one at a time before paying, depending on the polarity.

On the hand of the board in the soldering machine, make the mark of polarity.

The cord on the input is not used, so a bandage from the black insulating stripe is used on the input part. The bandage comradeship is guilty of such a thing, so that you can go to the future for carrying out and fixing in the new one.

Before installing the Krishka, I will change it to the robot. It is included in the hemline and it comes before the phone. As soon as the phone is on the phone for a moment, it’s impossible to get a voltmeter for the post-strum.

So as an internal contact in the socket, even a thin tube, and the probe will not go into it, it is possible to change the vikorisovuvati shmatochka of a thin honey dart.

Putting it into the tube of the internal contact, it is possible to connect it to the last attachment of the probe plug vimiryuvalny adjunct.

The voltmeter will show that there is a presence, and it means that the breakdown is over.

now we snap back kryshka.

Pid'adnuumo phone and radio by the results of the viconanoi robots.

The reason for the malfunction of the mobile phone charger

Naybilsh is often the reason for the loss of the memory of the memory є not far from being put before new during operation.

Phone charger repair

Possible causes of damage to the mobile charging unit

1. Shaving the darts at the plug and the base of the charging unit. The dart can be cracked when the charger is turned on for an hour.

To connect the plug from the phone jack is required not for the wire, but for the plug body.

2.Entry from the electronic board of the charger attachment. Even more often I turn on the charging in the hem, and do not use the socket. At the same time, the entire electronic board of the charger is permanently found in front of the other, so that the terms of the service of radioelements are reduced.

The wrong order of turning on and turning on the charger by the attachment can also lead to the early wear of the elements in the block.

When you plug the phone out of the charger from the attachment next to the other, you will see a lot of spikes that turn over the limit of the working springs of the elements. The price is overwhelmed by the transition processes, such as being in the memory when it is known that the phone is connected to the phone. If the charger is used correctly, the phone will be switched on and switched on to the switched on charger.

Technique for repairing a charger for a phone with your own hands

You don’t need to be a great fakhivt, so you know and shave the wire from the charging unit to the plug. Possibility of shrinking wires is possible when the telephone is connected. After plugging in the phone before charging, turn off the plug at the plug and present it to the unit, and immediately save the battery charge without interrupting the process.

In tsikh mіstyakh naybіlsh often see the shaving of the wire. As far as knowledge is concerned, shaving off the base of the plug, that is, they form the wires on the wall of 5-7 mm from the electrical outlet. For this purpose it is necessary to solder the whole part of the wire. Soldered dart insulate with a thin heat-shrink tube.

If the soldering of the wires is isolated, a larger heat-shrink tube is connected to the plug, for the hardness of the soldering. Once the wire is cut, it connects to the base of the plug, then the plug is pulled from the plastic clip, and the darts are soldered to the plug without the middle.

Do not reverse the polarity of the plug wires. I will shave off also with a multimeter in the mode of audible dialing or visually. I know I will shave off the wire with a small margin of offense to the sides. Clean up the wire from the upper isolation. Then they cut, clean out the insulation, twist and solder, pulling a thin heat-shrinkable tube on the leather wire in front, and a larger tube on the outside wire.

For soldering, put thin tubes on a dart and squeeze them out, using a soldering iron. In the beginning, you put on a larger pipe on the place of the thin pipes so that the pipe is overwhelmed by the amount of time. When soldering wires, observe the correct polarity behind the wire. A new wire with a plug for your brand can be delivered to the phone in special stores. To repair the phone, it may take until it is down to replace the defective wire.

Type of defective capacitors

Another common problem is the incompatibility of the charger with the phone attachment - the damage to the contact of the wrist plugs. The spring contacts of the hedgehog plug often come from the contact majdanchiks on the other boards. For usunennya of similar injustices to reach the end of the contact, there are in the middle of the block.

Open the krysh to the block. Good, I will attach a gvinti of the charger to the charger, and I will add the stink to it. In general, it is necessary to use a blade of metal knives with other teeth to cut through the entire perimeter of the grill. Having sucked the inequality, close the crumb and close it with tape 1 cm wide.

More foldable, but not completely available for the electrician є breakage in the attachment connected with the repair of elements, pay for the charger with the attachment for the phone. First for everything, open memory and pay a fee. I will fix the repairs from the visual inspection of the elements of the handy pay and I will become the darlings.

Diagram of an impulse charger for the phone

When looking at the elements, I have a lot of respect for the lowering of the upper part of the capacitor, the darkening and deterioration of the resistance of the resistors. Darkening resistors and ways to talk about changing the working temperature. At the same time, the resistor itself is inverted on the opir and the diodes and transistors are called.

The socle of transistors and the memory circuit for your brand phone can be known in the netting of the Internet. As well as visually detecting the disparity without going into the distance, turn on the adjustment and freeze the input voltage in the electric motor. It’s just as easy as the presence and the ice is a bit sensitive to the robots of the pulse transformer, to freeze the power to the unit.

yak rozibrati telephone Sony ericsson W595

rozbimo Sony phone Ericsson W595 for changing the matrix.

overwhelming

Tsya stattya not є kerіvnitstvom until dії! All the responsibility for the selection and distribution of your attachment lies with you.
Bagato virobniks do not carry guarantee obligations as they pristriy bulo rozibrano koristuvach. If you don’t need to spend a guarantee on your preference, clarify the guarantee conditions in the documentation, for at the virobnik I will add it.

vikoristovuvanі tools

You can get infected back panel the body of the phone. For the whole, insert the tool for disassembling cases (or a credit card) into the gap between the gray panel and the battery window, and hold it around the perimeter of the case, to remove the suction.

Maє viiti so. Two other parts will be visible by themselves, if you see the rear panel. Then screw two self-tapping screws, marked with circles.

Infection can be caused by the battery, in front of the cymbal, a loop is glued to the side. For this purpose, you can see the two battery screws, denoted by circles, a self-tapping screw.

pіdnіmіt motherboard board uphill. There is a train behind it. Pull on the dark lighthouse near the connector so that you can see it through the rose.

Maє viiti so.

Zbirku folds in a ringing order.

Similar stats

You can evaluate the article:

vitajutsya (35 comments have already been left out)

Great For you, thank you for the annotation of the rozbirannya. The mother's phone was erased in the Steer. machines more than one rock back. Mi yogo was wiped out, blown through with a hairdryer - NOT turning on. Gave it for repairs and we were told that everything is marno. I am at a given moment vypadkom know, I zagali forgetting about a new early evening. virishiv viprobuvati rozibratiі seriously dry all the schemes)) For the help of your web site, after drying all the schemes with a hot hair dryer, de bouly after oxidation і drive all the schemes with salicylic acid (alcohol 1%), having dried them again, having taken back. Dzhe want to zapratsyuvav) І axis of the Christmas tree moment, I push on the button, ... turn on. URAAA. I see little joy without shouting at all, it is not possible - 23:05 vzhe))) Super)) Dyakuyu for you!

Yak rozibrati gluing block living

Yak rozibrati The glued block of the router's life is neat and infallible. ...

Yak rozibrati ASUS charger Correct way USB repair

The indications are the best method for disassembling the adhesive charger. Pick-up without cost and repair with your own hands

Maxim, cool! Thank you for the comment 🙂

The statty is miraculous, great thanks for you, Roman! 😉
I have a problem with the "0" button, missed - the contacts with the button have oxidized / laughed, marveled - everything is clean. 🙁 rubbed with alcohol - not rubbing. Ale know that, if you push into the area of ​​the troch of evil and the "0" and immediately emboss on "0" - that's all right. I don’t know if it’s an infection. 🙁

So, judging by it, it is a small resistor, but it’s worth it. There is also a row of small parts of the trocha more or less "zero". This axis is right.

Kirilo, as long as it is really soldered - you can solder it. Ale exactly vіn vіdpayavsya? Maybe just a problem with the keys?

Exactly exactly! 🙂 Vin navit from one side in a direct sensible word. To that, just leave the scotch tape on top of it to trim, but the button still needs to be pushed on. Solder as long as possible, I will endure.
Um, tsikavo, and how did you see it and directly contact us? What are you looking for?

My comment here is the 1st one. So from, say, be a weasel, why the axis I dry all the microcircuit, the phone turns on, ale the keyboard (1,2,3,4,5,6,7,8,9,0,)

Thank you, at the same time zrozumіv yak pick up! I have a problem, in the process of charging the phone, spilling the baby's tea i consumed in the area of ​​the charging plug, at once the charge is not there, after trying without a battery to measure the springs on the terminals of the phone there is no 3 volts, standing on the charge for a day the battery is zero

Do not get in telephone.Pitane є, how robiti?

The phone won't turn on, what's the reason?

Oleksiy, Oleksandr, Meruert are more beautiful to bring telephones to good service.

I hid new messages, when they were made the phone went off. Became vmikati-showing the logo, distant black screen and periodically picking up, why should I work?

Olena, reflash telephone.

I have such a problem, after seeing the contacts without the names in squares, zeros, I have re-signed it, I have to reach the Sony Ericsson logo and that's it, I don't go anywhere, I don't react to it! Going to the mine, it seems that everything is, it is impossible to kill. Will you please? Thank you !.