Vidminny way to reduce the sound of a TV set - plug in the music center. How can I connect the music center to the computer independently? Yak plugin musical

For the rest of the rock the assortment of both professional and amateur acoustic systems has been developed. It is possible to use a sound system with two simplest speakers connected to the sound picture of a personal computer, analog speakers and an active subwoofer, multi-channel digital systems, connected to a computer, home cinema, television set.

Vibir practically bezmezhny, and leather and from the options to prevent the rejection of the whole sound sound. Apparently, vibrate the sound for your speakers to be heard out of hand. Yaksho є computer with garnoy sound card- switch to next, inakche - to TV. One of best vibors the camp is, by the way, a musical center, with a povnotsinnoy and balanced acoustic system.

A music center is being built to sound from the sound, as it is possible to create audio recordings practically from any wear - from magnetic cassettes to memory cards, such as external speakers and an active subwoofer. The sound was done correctly, the speakers must be connected to the sound. How can you take all the components from one goal?

Features of the Musical Center

Bagato hto vvazhaє, at once, if a personal computer has a laptop in the skin booth, or there is more than one, a need in such an archaic attachment, like a musical center, has come in. Infected also the possession of the sound is roughly like playing grammar - it’s not necessary for the help of music, as it is stoked by the subtle parameters of the sound, that are not needed by amateurs. Ale chi tse so?

Of course, it means that music centers are strongly influenced by one of their characteristics, and choose one of them from the one for whom you will be most likely to get used to it. There is only one option for the overheard of quiet music, for the vlashtuvannya vechirok - the one who is straining. I also plan to connect the music center to the home cinema through an AV receiver, if a third option is required. Yak didn’t have pardon with the vibrator, didn’t see the connection of the speakers, but the result wasn’t really okay?

Orієntuvatisya, in pershu cherga, it is required for the size of the system and the type. For the size of the most often it is possible to work hard at the attachment - and because of the effort to lay down the maximum density. There is not much to connect to the musical center of the majestic columns with dynamos in size from the container, as the dimensions are even more modest - in such a way the acoustic system simply does not open up all its potential, but it’s incredibly expensive.

The other, on the other hand, needs to be respected, is a type of musical center, where there is a set of functions for an annex. There are three types:

• Mikro is a monoblock music center, speakers that cannot be connected, some of them are included in the design of the sound. The set of functions of such an annex is even more modest - call the microcenter you can boast about CD and radio production. Yogi's exertion is not great, due to a burned-in magneto.
• Міні - a larger version, the speakers, which can be seen from the sound, which, in their own house, have more functional. In a new way, you can find a video of music from a built-in accumulator. In addition, on the panel of the annex you can often see a display showing information about tracks, playing and showing the adjustment of a graphical equalizer. Vzagal, the range of mini-musical centers is the widest - to new enter both amateur and professional models. Apparently, the options for connecting speakers here can be a lot of different things.
• Міді is the most necessary, the most important and new option for a musical center. It’s not just the speakers here - the sound itself dulls to the sound of the okremi blocks, which are indicative of the singing function. You can add music to your music using disks, cassettes, and flash drives, and a little more from platvoks. The choice of speakers because of the sound of the sound here is the easiest and the best to go for the help of professional acoustic cables.

Yak і size, type of attachment is necessary to pick up from the size of the attachment. Micro is a visual vibe for listening to music in apartments, it is better to go to the great halls and with a great auditorium, as there is the need for such annexes just above the ceiling.

Features of the speakers of the music center

Falling type acoustic systems, until the sound in the music center dies, you can connect the number of speakers. In the simplest options, there are two stoppers, and the stench is brought into the building of the annex. In such a case, the operation of the system is even simpler - the possession needs to be plugged into the socket, so that you can immediately start listening to the music. Dodatkovo nothing is required for switches.

In folding, expensive and tight models of musical centers, the columns are okremi, and they can be flexible. The dermal column, at its own cell, may be equipped with a variety of vipromynuvac dynamics. Khnya k_lk_st change from one to three. Yakshcho dynamically alone, it was guided by the creation of all sound frequencies. Yaksho є okremiy dynamik of small size, then high frequencies vivodat okremo. For some models, low frequencies are predominantly visible, for those who are victorious there is more dynamism. Such a podіl will make sure I improve the clarity of the sound.

The simplest version of the speakers is a stereo pair. Vona is two frontal dynamos, equipped with one leather dynamo. The dermal column is shown behind its channel - liviy and praviy. The stench is due to the improvement of the entire range of audio frequencies (from 20 to 44000 Hz), but it’s hard to work without a reason, the quality of the sound in simple music centers is reduced. In the larger folding models, the sound is distributed on the frequency zones, the skin of which is made of dynamic speakers.

A single subwoofer speaker is used to drive the lowest frequencies. Vona possesses even a great dynamism - from its diameter to lay down the soundness. Reduce the sound even more with the help of the phase inverter - a cylindrical tube at the body of the low-frequency speaker.

A number of dynamos can be found in the instructions to the music center. There, a number of channels begin, which is described by an index, adding from two numbers: first means a number of wide-dark channels, the other means a number of low-frequency channels. Indexes can be varied from 2.0 (stereo pair) to 7.1 (volumetric sound).

Ale will not get far on spalts alone. One of the main changes to the musical center for the production of music is that self-sufficiency is provided with a set of important details:

• a sound decoder, which converts information into a sound;
• a sound processor - an analogue of a sound picture in a computer;
• Equalizer, which allows you to tune the sound - virivnyuvati frequencies.

Connecting speakers

The speakers are connected to the music center in a standard, even simpler way - using additional acoustic wires with terminals. Varto respectfully vivchiti back panel dzherela to the sound at the musical center.

On them you can know the onset of roses:

• for connecting to a cable of a changeable strum;
• for connecting a subwoofer;
• socket for FM antenna;
• gvinti for plugging in clamps - plus and minus.

The same gwint chi can be found on the speakers. Everything is simple - just dart with cleats, picking up the polarity, and the music is loaded. Universities can easily replace the speakers with the set by the same parameters. Vyhіdny opіr in Ohm appears to be in order with gwints for clem, guilty of making the support of the dynamics of the speakers, so vikoristovuyutsya.

Sometimes you can know RCA-roses, signed as "Line In" or "Input" - the stench is used for introducing sound information into the music center. For example, to record the sound of chi karaoke.

The music centers appeared on the cob in 1990. Tse bully taut sound machines with a radio receiver, cassette deck and drives for CDs. Unimportant to those who have cassettes on sale, you don't know, and CDs are easy to go from the mod, the music center is not old and current: it’s not old and modern: it’s possible to sound like the titles of the evening, so I’ll see it forever. What is the right way to connect the music center to a computer, TV set or laptop?

Sho take musical center

As a rule, under the music center there is a sense of being united in one building, an annex for making the sound of young dzherel, as well as pidsiluvach. Cassette decks and CD drives have already gone by in the past; Great speakers, which are equipped with a musical center, are equipped with a range of pressures from 90 to 150 watts, which will please the fans of the most popular music lover. The frequency range of vipromynuvacs has significantly expanded, the acoustic characteristics of which have reached perfect. It’s the very fact that it’s pragmatic to connect home equipment to the music center — a TV set, a computer, a DVD programmer.

They didn’t lose sight of the old center, but it was 10–20 years old. Through the standard AUX, line-in or microphone input to the music center, you can easily connect a tablet, phone or laptop. Yours is fond of music to sound at the apartment, in the office at the dachas. Komutatsiya, as a rule, does not become a great problem. It is necessary to deprive yourself of the neatness and the simplest rules of safety. Most of the time, it is very practical to connect to the music center.

Yak vive computer sound from laptop

Most "computer" speakers do not appear. high-handedness sounding, and vbudovanі "squeaky" laptop rozrahovanі on vіtvorennya system sounds. Make sure to get rid of the content of the movie, get drunk with your love compositions or multimedia presentations, or send a sound signal to the music center more beautifully.

If you need a computer to go to the music center, you need a special cable, on one end of the jack 3.5 mm roses, and on the other one - two RCA type roses ("tulip"), ring up the white and red color ... The principle of creating a field is that the line input of the musical center is connected to the line output of the sound picture of the computer. For this, the 3.5 mm Jack plug is inserted into the socket on the computer (call out the green color), and two tulip-roses are inserted into the socket on the case of the music center. For large attachments of line input, it is necessary to activate - turn off the LINE-IN mode or AUX, change the instructions to the center.

Even in the music center there is no RCA line input, you can connect it with a computer, you can also use a cable with two identical 3.5 mm Jack roses on the ends. Such a wire is connected to the sound picture of a computer or a laptop with a Jack socket on the front panel of the musical center, designated as AUX, or IN. In the case of a vikonnі komatatsії it is recommended to vimknuti grudge attach.

It’s basic, so it’s too early to enter, and it’s necessary to activate the sound when it comes to the sound. Reverse the instructions to your center.

Video: connecting the audio system to the computer

Yak pidsiliti sound of television

The axis is already a dozen rocky in the main federal channels leading the movement in stereophonic mode. For lovemaking serially sounding yaskravish, it is recommended to connect the TV set to the musical center. From the teleprimary model, you will need an RCA-RCA cable, RCA-Jack or Jack-Jack. To connect the TV viewer to the music center, you need:

1. Vimknuti Television and Music Center.
2. Know on TV roz'am AUDIO-IN, send a link.
3. Connect the cable with one end to the TV set.
4. Embed RCA Tulips in the Music Center.
5. Lay the cable carefully.
6. Uvіmknuti attach.
7. Aktivuvati line entrance to the center.
8. Revisit the sound.

Most TV models may be on line RCA outputs, designated AUDIO-OUT. Even though there are no such roses, the sound can be brought through the port for headphones - the Jask jack is often installed on the front panel of the TV set. Beastly respect, how loud the sound is in a wide variety of cases, due to the installation of the TV-view regulator.

Yak hearing the music from a smartphone at the music center

Music recorded in smartphones sounds at all its own, as if to send a signal to the speakers of the music center.

Traditionally connected to the telephone

Absolutely all telephones can only send one output to the sound - to the headphones. Connecting attachments, a required Jack-RCA cord. A single 3.5 mm Jack plug is inserted into the telephone socket. And two "tulips" RCA on the last end of the cord fit to the line input of the musical center. At the first increase, it is recommended to reduce the sound to the minimum.

Modern alternatives: mobile connection for an additional bluetooth (Bluetooth) or Wi-Fi

Some stereos of the new generation have a phone connection to the phone, they can be connected to Bluetooth or Wi-Fi. Deyakі models of possession of a rose for the telephone on the panel of attachments. The smartphone starts charging for an hour. The center at once from it can be used as an alarm clock.

It is a pity that the music center with such a connector can be found on the model phone - until I attach a phone for the iPhone on Android, I cannot connect it. І zvinuvachuvati in a whole second, there are no virobniks, as they let non-standard annexes. A detailed description of the possibilities for the center is given in the book of exploitation.

Video: telephone and music center

Electrical connection

Be-yaka guitar can connect through a special pidsiluvach, the music is called this combo. Without a new sound, you will be zhakhlivim - add a gritty pidsilyuvach, do not torment yourself or those who feel sick.

As soon as the curse is stuck at the probts, and the new Stratocaster still wants to, plug the guitar to the music center is possible. For a lot of vipliv:

1. Take the adapter from the great "jack" (6.35 mm) to the "tulip" RCA.
2. Turn on the great "jack" at the sound of the guitar.
3. Insert the "tulip" insult into the line entrance to the center, do not think that the column is correct.
4. Take the fun back to the center to the minimum.
5. Activate the line entrance to the center, which is required.
6. Take a chord, instantly pushing the buzz.

Guitar is a monophonic instrument, so the sound can only be heard from a single speaker.

Yak zmusiti MP3 player grati through speakers

A portable MP3-player can be connected to the music center through the navigation links. For the whole, an adapter from 3.5 mm Jack to RCA roses is required. In addition, you can send a signal to the microphone input, having received the sound from the programmer.

Chi can put a music center by the machine

Tі, hto spend a lot of an hour at the kerm of a car, to use a car with a garnished audio system. Ні better for a fellow traveler nіzh is fond of music. Whole real є storing the musical center for the community. One of the transitions is the price of a 220 V changeover, from which you call the pratsyu audio center. For current electronics, there is no overshoot, as it is uncomfortable to podolati.

Uwaga! Victory of non-standard possession in the car may not be without fault. It is necessary to close the case, do not use the audio system in Russia.

For sale є re-converting, which will prevent switching from 12 volts to 220. One, however, requires a memory, such a transformer for living in the center is locked, so that when the engine is switched on, a quick release accumulator battery... Yak has shown practice, the best way to play the audio system for an hour, if you turn the engine and generator over 2000 for khvili.

Yak put the subwoofer at the stereo system

The subwoofer is a special dynamo, which vibrates low-frequency sounds in the range from 20 to 120 Hz. Tsei acoustical pristіy often stagnates in cars, it is used for the production of low bass. So as at low frequencies the stereo effect is visible, the sound does not localize, but it creates a unique sounding atmosphere.

Yakshko viniklo bazhannya modernizuvati musical center and connect to a new subwoofer, you need to get familiar with the owner from the exploitation center. Often a special SUB input is set on audio systems. If there is no such input, you can connect the subwoofer to any line output. The scheme of all the middle will attach itself to "select" the sounds of quiet frequencies, for the creation of certain indications.

Active chi passive subwoofer

The active subwoofer is equipped with a powerful driver, it must be connected to the line to the center. Adjust the working frequency and the soundness is possible on the case. If the subwoofer is passive, then it must be connected to the distribution center and standard speakers. The passive option is not to equip the peddler, but to reach the sensitive one to roztashuvannya at the primitive. Roztashovuvati yogo is not possible in kutas chi nishah, where the sound becomes superstitious.

Connecting a flash drive

A modern musical center of the new generation of a USB port without a blame. Through it, you can listen to audio recordings, saved on accumulated information like flash drives.

As the center doesn’t have a new USB port in a new one, you can use an extra car FM modulator or a transmiter. For the whole, a small transformer is required for an electric struma, which will transform a 220 W by 12 W. Call the winners at the viglyadi of the car cigarette lighter. An FM transmiter can be connected before it can be USB-input. The tuner display shows the frequency, the modulator transmits the converted signal.

Another option, which can be used with new technologies from the center, without a USB input, is the connection to the computer via the AUX IN output, as described in the description. Leather computer has a number of sockets for a flash drive, which can be quick for an update sound signal... The quality of the performance with such a connection will be significant, not when the car FM modulator is connected.

Video: plug in FM modulator

Connecting color - light music

A good addition for the musical center is the musical attachment. Supports the sound row of small lamps in a pink color, the sash creates a garnish halo and invisible atmosphere. In order to connect it to the center of the music, you need to use the connecting cord as quickly as possible, and we will secure it with a plug of the RSA or DIN standard. If the connection to the line output is not available, you can add the cord by opening parallel to the connection to one channel.

Another one of the ways to connect light-music is to connect without the front to the speakers with a crocodile-type paddle. The whole way is possible, like cables, to go down the center to the speakers, to be installed at an accessible place. In іnshomu vipadku get to go to the point of soldering.

There are also coloromusal installations, possessed by a built-in microphone, such as "hearing" the music that is transmitted to the lamp. Such an installation does not require a switch, it is enough to roztashuvati without a sound and turn on the sound before the power outlet.

Connecting a mouthless and mouthless microphone

A lot of audio systems for the karaoke function. In order to speed it up, you need to connect the microphone to the center. The process is even simpler: insert one end of the cord into the socket, marked with the MIC symbol or the microphone icon.

Pidsiluvach for a mouthless microphone

They are talking and childless models of microphones, which give the viconauts more freedom to their hands. To connect to those sockets, it is necessary to insert the line input of the receiving module, and insert the living element into the microphone itself - batteries or a battery.

The radius of such a microphone can be measured from 10 to 50 meters.

Connecting the programmer of the windows

It may be marvelous, but the trend has been growing - recording of musical works on vinyl discs. There are some “gigantic” software programs on the sale, which are based on digital analog audio recording.

The digital programs of the new generation will enjoy the use of modern audio systems and computer technology. Such a player is easy to go to the music center through the line entrance.

Connecting old software developers to modern hardware is often not technically difficult. For the whole, it is necessary to rewire the roses from the supplied cords, and in the musical center there is a simple function of the line entrance.

Mixer connection

In addition, the musical center is a building with a mixer. This gives you the ability to customize the sound according to your needs. For example, when using grids on a device with a spin, it is necessary to regulate the strength of that sound flow.

As a matter of fact, it became possible to connect the microphone and rose from the instrument to the mixer console. Use the mixer through the line input to connect to the music center.

Regardless of the model of the mixer and of the sound control, the connection is made using separate cables, which are described in the technical documentation.

Video: Mixer connection procedure

Dodatkova antenna for the music center

One of the weakest musical centers of the first generation is the antennae with low sensitivity. Tied with a tse bulo z tim, which is far from the skin of our unassailable Batkivshchyna buv presence strong signal FM band. By the method of probing and pardoning, the people knew how to diminish the received signal, they went to different types of antennas. In practice, the result is a simple middling guide up to 5 m.

The first variation of the variant is to move with your own hands through the 60-70 cm side of the frame with the side. Having experimented, you can know the optimal place for such an antenna.

There are also ready-made antennas that can be used for promises - you can buy them in stores.

Adding to the musical center, you will be given acoustic acoustics, followed by a memory of the rules of special security. The main recommendation for the installation of cables from the field to the general installation of the electrical power supply.

In the early days of home technology, it’s possible to stock up on music centers, not to see a wide stash and safely hit with a saw on shafs. There is a dummy at the end of the day; Chi so tse? Possession for the production of music є as well as to deliver to expensive ones, that is why Skoda will send such a technique to the smitnik. The statistic has an option of alternative storage for an attachment for the production of music, for example, like connecting to the computer a column from a music center without a center.

How can I connect the speakers from the working music center to the computer?

Supplied power supply, how much really connect the speakers from the stereo system to the PC. It is possible to show up, in general. And for a functional acoustic attachment, such a connection process is not a warehouse of any difficulties. For this procedure, you need to speed up with one cable, zovnishniy viglyad like a viglyadє approximately like this:

• one side of the cable is overlaid with a 3.5 mm black minijack;
• Hang two tulips of white and red color from the side.

Important! There is nothing foldable in the whole cable, it is possible to use the soldering iron itself, only for all needs it would be necessary to use the soldering iron correctly. For the whole, it is necessary to know the cable itself, for its length it is possible to store the cord from the stereo earphones. You need plugs to bathe in any kind of radio parts at a supermarket or on the market. It seems like it is cheap and cheerful.

Yak correctly connect the column from the music center to the computer:

1. For purchases, the cable is plugged into the AUX-rose, which is attached to the rear side of the stereo system panel. There are two of the same openings, like a red and a beige color.
2. Another end of the cable is attached to the opening for the output of acoustic dynamos to personal computer... It’s a great opening, like a green little obidok. І tse mayzhe everything.
3. When the audio system is turned on, it vibrates to the new AUX mode.

Important! The Kozhen Okremiy Musical Center can be well established, as you can see from them, so for the connection you need to vibrate individually, or you can try to find a way of “scientific tic”. Maybe you can do it right if you need a proper regime.

Now, with ease, you can speed up our joy and elementarily connect the stereo speakers from the audio system to a stationary PC or laptop, for the visibility of the musical center, which is very functional. If the possession for the production of music is overwhelmed by a non-working machine, how about a problem in a certain situation?

Yak plug in speakers from the non-working music center

The current situation of the development of the demand for vitrates. The problem is that in the stereo system of the disassembly there is a driver, which is how the speakers live. The need for a sound picture, roztashovanoy in a computer attachment, not vistacha for rozkachuvannya acoustical dynamics. Connecting speakers from the music center to a stationary computer or a laptop without the center itself is not so easy to connect. Ale can be.

For a person in Pershu, it is necessary to know what is pidsilyuvach or by himself. For the whole camp in the past, both are okremiy pristіy, so zasosuvannya pay from the old speakers. With the head weary, those who did not have the tautness of the vibrating driver did not get much tighter than the stereo dynamics.

Important! For the consumer, you can independently solder the power supply - the price is not so foldable. In the Internet, there are even more ready-made schemes, be it folding and other options. Necessary details can be easily found at any radio-amating wizard shop.

In some cases, there is a computer acoustics in the booth, at which there can be a function of decilkokh speakers. In such a case, it is necessary to clarify the effort and laboriousness, to conduct an analytical analysis of the acoustic dynamics of the home stereo system.

Important! Required characteristics are found in the instructions for the rear panel of the audio system. As soon as the parameters go, then the default is shown, and you can switch our settings.

Video

It can be seen from the posted statistics that the music center, where visitors can use the mods, can be easily transformed into acoustics on a computer. For the whole, it is necessary to speed up the speed and joy, which we bring to our statistics. You can connect aux to muses. center and enjoy music.

For the construction of the musical center, there is even more development, ale, the unity of the living unit, the pressure of the inputs until the sound jerks up. The sound speakers can be installed in the case, and can be fitted ok. The directors of the cim to the basic elements of a morally old musical center with a cassette deck are suitable for organizing a musical suprovod in an office, at home or at a dacha. How can I connect a phone, a player, a computer, a laptop, a laptop, a TV set and a music center to the music center?

How can I connect a computer or a laptop to the music center or an audio system?

Zavdannya: є laptop and computer. It is necessary to bring the sound from the annex to the music center, to hear music or grati in іgri.

Analog connection via line inputs

To know: RCA adapter cable - "mini-jack" or RCA - RCA adapter cable.

Sho robiti:

Connection via USB sound card

I’m a computer, but a laptop doesn’t have a sound picture, motherboard it is not possessed by linear inputs, it is possible to bring sound from an attachment through a sound card. A small box is inserted into the USB port and is used as a sound card system. She has a line-up - the nest of "minijack".

RCA adapter cable - "mini-jack", sound card with USB interface.

Sho robiti:

1. Turn on the sound card to the USB port of the computer or laptop.
2. Connect the RCA adapter cable - mini-jack to the sound picture in the socket, marked with the "headphones" icon (green color).
3. Connect the cable to the line inputs of the RCA music center.
4. Check out the LINE IN music center.
5. Yaksho is required, set up in operating system computer vivedennya sound to the call card.

Zovnishnya sound card will convert the number to sound

So also rose'єm AUX?

The name AUX resembles the English auxiliary, which means "additional" or "additional". In audio technology, this is called a line input (called AUX IN) or a line input (AUX OUT). Low-frequency sound and video signals are transmitted through the line output from one annex to the last one. As a rule, the signal at the inputs / outputs of the AUX standards is not regulated, for some reason the confusion of the attachments of the new virobniks is not guaranteed.

Video: how to bring the music center to the computer

Yak plug-in musical center chi stereo system to televizor

Head: for the sound of films and broadcasts, for looking at each other, sounding realistically, it is necessary to bring it from the TV set to the speakers of the music center.

Analog connection via line inputs / inputs

RCA - RCA adapter cable.

Scho zrobiti:

1. Vivchiti roses on the back and back walls of the TV view. Know the RCA jacks designated as OUT or AUDIO OUT.
2. Take the RCA to RCA adapter cable.
3. Connect the connecting cable with one end to the TV set, which can be accessed by the color of tulips. Red plugs select the right channel.
4. Connect another cable to the music center.
5. Introduce the sound to the line input in the music center.

Line-out to one RCA sub-cable

Analog connection via composite output and adjustment

As far as the TV set is not available in RCA, you can choose a universal SCART device. In one great block of engineering, all inputs / outputs, including video signals and sound, were identified. Switch from SCART to be issued without the need, if required SCART - RCA.

SCART - RCA adapter cable.

Sho robiti:

1. Know on the back of the TV viewer roses SCART - a wide block of a folding form with no vuzy openings.
2. Plug in the SCART - RCA adapter cable for SCART roses.
3. To send a sound signal to the music center, you will need chervonia and beads "dzinochki". On the other hand, a video signal is transmitted, it will become vilny.
4. Connect the RCA plugs to the musical center, touching the colorah (chervonia - right channel).
5. Remove the LINE IN input at the Music Center.
6. Inodi in the settings of the TV viewer, you need to activate the view to SCART. It is necessary to check the instructions.

Composite view to compensate for the required signals

Connecting via login for navigators

To go to bed, so the TV viewer is not a little line-up, but deprived of the nests for the navigators. Yak otrimati sound from the speakers for such a vipadku?

To know: RCA adapter cable - "mini-jack", adapter "jack" - "mini-jack".

Sho robiti:

1. Vivchit the TV viewing corpus from the sides. Much for the earbuds can be from either side, including on the front panel, it can be captured from the front.
2. It’s a little nest, it’s better for everything, “mini-jack”. The bigger one is the jack (6.35 mm = 1/4 inch).
3. Whenever there is a clear rose, then a ready-made adapter cable RCA - "mini-jack" or RCA - "jack" is ready. So, as cables of the first type are used more often, it is possible to additionally take the adapter from the great "jack" to "mini-jack".
4. Plug in the adapter cable at the headphone jack on the TV.
5. Bring the RCA "tulips" to the center of the music.
6. Take a look at the music center line entry.
7. Adjustment of the guchnosti of television and music to the center.

Note: the soundness of the sound is not only due to the mood of the musical center, but rather to the soundness established on television. As soon as the TV mode is turned on "without sound" (MUTE), then the music center is also movable.

The sound from TV can be played through a rose for headphones

Digital connection via optical cable

Modern television reception and musical center of the possession of optical output of digital sound transmission. The whole standard to be named after the companies that were released: Sony / Philips Digital Interconnect Format (S / PDIF). As long as your attachments have an S / PDIF interface, it is recommended that the signal be transmitted from the digital viewer without any input for re-implementation.

Optical S / PDIF cable with two connectors.

Sho robiti:

1. Vivchit and instructions for the musical center and television. Know the rose S / PDIF, the stench looks like a small square, behind which you can see a red laser light.
2. Connect the optical cable to the TV-set socket, and at the same time - to the optical socket of the music center.
3. Mozhlivo, digital input to get the activation in nalashtuvannyah - change the instructions to your attachments.

Laser promin transmits sound

Шо means gnіzdo phones at the Musical Center

Z English movi the word phones is transformed into "telephony". Infectious to sound cheaply wonderful, the old-fashioned term "headphone" (headphones) is victorious in the earthy technical literature from the moment of the wine-going radio (1899) and until today, starting with the setting of personal listening. With this rank, phones on the building of the musical center and the radioaparaturi mean rose for connecting to the head.

Note. Have computer technology for the designation of sound roses, it is also accepted by vicoristovuvati piktogrami and rosmіtku koloriv. So a lot of headphones are broken from the green plastic, and the openings for the microphone are from the horn.

Video: how to connect speakers to TV

Connect your phone / smartphone to the music center

Head: at the dacha check galasliva evening. Sound pidsiluvach presentations are deprived of the old people by the musical center, all the music has long been used by telephones. How to sound dim and dilyanka with love melodies?

Analog connection via line input

90% of vipadkiv phones have an analogue output to their headphones. The device is connected to the musical center through the tsei vikhid.

To know: RCA adapter cable - "mini-jack".

Sho robiti:

1. Take a mini-jack adapter cable - RCA. Connect the cable to the RCA roses in the music center.
2. Insert "mini-jack" on another cable into your phone and add music.
3. Recognize the line-up of the pidsilyuvach at the musical center.
4. Establishing the musical content of the telephone and music center.

Enjoy the phone while charging, so the disco did not break at the most suitable moment. It is recommended to connect the phone to the charger attachment before the hour of music production.

Have a phone call є wins for navigators

Incomplete way:

• analog sound will be used for the hour of re-creation;
• the phone needs to be plugged in before charging;
• Schob change the message, you need to unlock your smartphone.

Digital connection via docking station

There is a special docking station to help the music center to take the shortcomings of the analogue phone connection. In the middle of the docking station, it’s like a simple model, which can output sound to the “mini-jack,” so they are equipped with their own podsiluvach, dynamics and remote control.

To know: RCA adapter cable - "mini-jack", RCA - RCA adapter cable, docking station, suitable for your smartphone.

Sho robiti:

1. Make a docking station and add a sound cable for her. It can be a RCA adapter - RCA or RCA - "mini-jack".
2. Place the phone at the docking station, unplug the music on the smartphone.
3. Connect the cable with one end to the entrance to the docking station, and then to the line to the entrance to the music center.
4. Let the line enter the center and improve the soundness of the music.

Docking station to preserve sound sound

Perevagi method:

• phone for charging;
• Keruvannya music completed by the docking station;
• Change the track easily from the remote control.

Note. The docking station works without smartphones. Babusin "Nokiyu" so don't switch on. Well, an old phone can't play MP3 either.

Video: connect your phone to the music center

Yak plugin guitar

Supervisor: є Electro-tara wants more gratis, even pennies for a guitar pidsilyuvach (combo) is dumb. How can I connect the guitar to the music center?

The signal that goes from the sound generator of the electrical device is even weak, it will need to be able to be hardened. Professionals do not recommend plugging the guitar without an intermediate power supply and processor to the speakers, the sound will be even more rotten. It's technically cost effective.

Connection via line input

To know: RCA cable - "jack".

Sho robiti:

1. Connect to the standard output of the guitar sound generator great plug "jack" from the jumper cable.
2. Connect the "tulips" to the RCA cable to the line input of the music center. It is recommended to build in at once offending plugs, so do not think about those right or left channel pratsyuvatime.
3. Turn on the line input from the instructions to the music center.
4. Vistaviti to the maximum of the music center and take on guitar chords.

The guitar is connected to the line abo microphone input

Note. Guitar is a monophonic instrument, so the sound is less from one speaker of the musical center.

Connecting via microphone input

Microphone input of the sound is short for the linear sound. Another option is to connect the guitar to the microphone input.

It is required: RCA cable - "mini-jack".

Sho robiti:

1. Vivchiti music center. Know the new microphone input. Yogo is often identified with a microphone icon, written MIC or Karaoke and placed on the front panel. Sound the jack for the microphone input - 3.5 mm ("mini-jack"), protects and large "jacks". Pick up the adapter or the other audio cable.
2. Connect the audio cable with one end to the microphone input of the music center.
3. Connect the cable with the great plug to the electrical connector.
4. Take a guitar chord. If the sound is mute, turn the microphone input. One of the first requirements is specially made - a step to reconsider the instructions for the musical center.

Note. Deyakі muzichnі centri give zmіnyuvati power on the microphone input. It is recommended to adjust the level of strength, so as to navigate the most popular reefs, they did not rewire the center of that column - the output cascade can be used.

Video: plugging in electric power without a combo

Yak connect mp3 player to the music center

Zavdannya: є MP3-player, I would like to voice the music at home or bring my own music library on a visit. How to connect the player to the music center, how can you stand in the police?

Usi mp3-players are used for personal listening to music, so the sound is sent to the headphones - they have no line of input, as a rule.

Connection to line input

What you need to know: cable "mini-jack" - RCA.

Sho robiti:

1. Connect the adapter cable to the mp3 player and connect to the video.
2. Connect another cable to the RCA jack of the music center.
3. Aktivuvati at the musical center line entrance.
4. Build up the loudness of the sound in the music center.

The easiest way: go to the input of the headphones to the line input

Connecting to microphone input

As the music center is not small for the entrance, you can try to send the sound to the microphone input.

To know: cable "mini-jack" - "mini-jack", crossover (for consumer).

Sho robiti:

1. Know the microphone input and value, like a new rose.
2. Vibrate the cable with a pop-up rose, pick it up if necessary.
3. Turn on the cable at the player, start the composition and reduce the soundness to the minimum.
4. Remove the cable at the music center.
5. Disable microphone input for consumer.
6. Improve the performance of the microphone input and the soundness of the player.

Connecting to the microphone input to the center

Note. Microphone input weak signal... The player can override sensitive pidsiluvach. Repair with a little stuffiness on the player, then smoothly improve the stuffiness, do not allow yourself to appear.

Video: connecting the player to the music center

Yak vbuduvati music center by the car

Zavdannya: bought a car basic set without magnesium. Є bazhannya stand at the salon music center, sparing the car sound.

An auto-grader, like a bazha, put in the salon on a regular basis, get stuck with such difficulties:

• Poshuk miscya, kudi put the power block. Іngineeri will make the design of the salon, which will be handy and baked. All attachments to stand on their own motions; If the box needs to be securely fastened, it won't take off in case of heavy galvanizing.
• Zabezpechennya live music center. The tension in the onboard hedge should be set to 12 V. post_yna napruga in the winter 220 V.
• Poshuk mіsciya for stovpchikіv. Put the audio system in the car, you see sounds like that, no sense - you can hear and phone. Putting the speakers from the musical center on the dashboard is not possible, it is not without reason. It is necessary to shukati for them m_sce and lay darts around the cabin. More beautifully, I want to take a couple of dynamism at the door, and I want to take a couple of dynamics at the door.
• Pereskodi. The machine is dzherelo electromagnetnyh pereshkod. Especially the cim ignition system is used. On the road from the car, pobutova technology from the plant is not stolen. Pointing out the light will ignite the sound.
• The quality of the sound. Making the right sound picture in a noisy car interior nontrivialne zavdannya over the yak lamayut heads of the design bureau. Because of the systems, they are not insured for the sound space in the car, so it is easy and cheap to convert the car to concert hall do not see.
• Keruvannya vіdvorennyam. Organizational management of the musical center is not rooted in the mixing of tracks and regulation of purity. The handles are required to vivoditi at the zruchne misce, to carry a special DJ from you.

Visnovok. Independently, the sound of the machine is very powerful. Safe for you, those who want to improve the performance are much more powerful and resources, not necessary for installing a boombox on the rear wheel. However, you may need to securely secure it.

Zrobiti garnish sound cars are not easy

Uvaga. A car is a technically folding device, as well as a transport device with a built-in security. Satisfactory modification of the interior, involved in the design of the machine electric lancers it may not be safe for life.

Video: installation of speakers from the music center to the car

Yak switch subwoofer

Zavdannya: I want to expand the frequency range, I want to create a music center, I feel like the earth shakes in the cinema and vibuhayut pomegranates in the games. Added a subwoofer, which must be connected to the music center.

Connecting the subwoofer to the speakers

The subwoofer is a great dynamo that can handle low frequencies (up to 100 Hz). In the case there are filters and low frequency amplifiers, as well as resistive speakers for narrowing the support of the subwoofer inputs to the outputs of the music center. The subwoofer is connected in parallel to the center speaker outputs.

What you need to know: speaker cable, banana jacks.

Sho robiti:

1. Vivchit construct a subwoofer. Know the input jacks for connecting speakers to the music center. The stench looks like a great plug for a heavy-duty cable, a mother for a socket for banana plugs. The rest are named so through the springy peels, similar to the skin of a banana.
2. Vivchity plugged in speakers to the music center. The most common for a heavy-core dart.
3. Visnichit iz mіscem, at what cost is a musical center and a subwoofer. Vimіryatіvіdstan between the inputs of the subwoofer and the outputs to the center. Vrahuvati stock for laying wires. A double-core acoustic cable is required for two more - they are connected to the left and right channels of the speakers.
4. Make and break the acoustic cable. As soon as you pick up "banana" plugs, mount them from one side of the darts, touch the color marquannya - all the chotiri plugs.
5. Connect the plugs to the subwoofer, connect the darts in parallel to the input of the speakers to the music center, not to the speakers themselves.
6. Turn on the music center and subwoofer, start up the music.
7. Adjust the soundness of the musical center and subwoofer, if necessary, adjust the level of the bass and the frequency of the low-frequency filter on the subwoofer.

Connect the subwoofer in parallel to the speakers

Connecting the subwoofer to the line output

As a musical center of possession of a line input, you can connect a subwoofer with a line input.

It is required: RCA - RCA cable (mono), you can take a mobile cable and use one channel from a new wire.

Sho robiti:

1. Know on the case of the subwoofer line-in.
2. Know on the building of the Musical Center the Linear Vihid. Call a pair of RCA roses ("tulips").
3. Connect the RCA cable to the subwoofer.
4. Connect the other cable to the RCA cable to the music center, to connect the vicorist one wire is required.
5. Turn off the subwoofer.
6. Hide the music center and music. Linear vykhid to the center beckon if you want to, so that from the bass dynamics you can get sensitive low sounds.
7. Adjust the performance of the music center and subwoofers.

A good subfooter for equipment with a line entrance

Note. The stereophonic effect at low frequencies does not appear, so all subwoofers are monophonic attachments.

Video: connect the subwoofer without power

Yak plug in a USB flash drive to multiplayer or music center

Zavdannya: є Music Center and USB stick with music files. It is necessary to grab compositions from a flash drive through the music center.

The modern music center is available from the built-in USB ports. As the music center already has a USB port, the problem is viral.

Yak get up the call player

As the music center doesn’t have a USB port, you can take a premium mp3 player with a pink USB or SD card slot. Such pleurians can be used in the useless formats - portable, entertaining and stationary.

Boombox gra itself and connect to the music center

How to be famous: callous player s USB port, cables RCA - RCA or RCA - "mini-jack".

Sho robiti:

1. Vivichi onyavnі attachments, break out the scheme of attachments.
2. Pidgotuvati cables are fallen from obvious roses.
3. Insert a USB flash drive or an SD card into the player.
4. Connect cables to the player and the music center.
5. Uninstall the player
6. Uvіmknuti the music center, activate the line entrance for the consumer.

Yak plug in and set up a computer

As soon as you hear music at home, you can connect a computer to the music center.

To know: a stationary computer with a sound card, an RCA - RCA cable.

Sho robiti:

1. Connect the USB flash drive to the computer.
2. Launch the program for the production of music, increase the output of the track.
3. Connect the RCA cable to the audio line.
4. Connect the other end of the RCA cable to the line input of the music center.
5. Hide the music center, activate the line entrance.
6. On the computer, you need to set up the sound, the signal is sent to the line output of the sound picture.

Bonus for the victorious way: on the computer you can be amazed by the film, the sound is sent to the music center.

Connecting media player

Modern media players є with compact outbuildings in the surrounding building, which allow you to play music and video without any problems. For playing music from a flash drive, it is recommended to add a media player. Bagato mediaplayers have an optical output - the signal is transmitted to the digital viewer without any need for a signal.

A flash drive and memory card must be connected to the media player

What you need to know: media player, RCA - RCA cable or any other type.

Sho robiti:

1. Insert the USB flash drive into the media player.
2. Connect the cable to the player and the music center.
3. Take the line entrance to the music center.

Bonus for the victorious way: the media player can be used from the smartphone, and it will allow not to deprive the music of the flash drive, but to listen to the Internet radio.

Video: how to add MP3 engraving to the music center

Yak connect additional speakers to the music center

Zavdannya: є Musical Center is a collection of pre-finished columns. It is planned to connect the stores to the music center, to correct the effect of the spacious sound.

Uvaga. It is not possible to connect the new dynamics in parallel to the old ones. The zagalny opir of the lance of the dermal canal will be smaller, є the riser of the lance of the dermal canal will be less important to the musical center.

Scho to know: stoppers, audio cable for the size of the connection.

Sho robiti:

1. Column size at the room.
2. Take out the audio cable with a reserve, so that you can stretch it out.
3. Connect the additional speakers with a guided circuit. Take care of the polarity of the connection.
4. Hide the music center.

Additional columns last connected

Note. The scheme has been introduced to give a tsikaviy sound effect of pseudo-quadrophony, even if the sound quality does not move faster than navpaki. Through the loss of dynamism in the lanes of dynamism, the soundness will be lower, it can be created. For rejection of a sparse panoramic sound picture, it is more beautiful to vicoristovuvati special bagatokanalny pidsilyuvachi.

Video: how to connect more speakers

Connect the microphone to the music center

Connecting a microphone microphone

Head of department: є handheld microphone. It is necessary to connect the microphone to the music center, to sound the home disco or organize karaoke.

How to be familiar: a hand-held microphone, the interceptor "jack" - "mini-jack".

Sho robiti:

1. Vivchit the construction of the musical center and know the microphone input. Most often there is a lot of gusset on the front panel. Tse can be either "jack" or "mini-jack".
2. Dropped microphones can also be used with plugs of two types: "jack" and "mini-jack". Schob prilad buv universalny, post-chiefs include adapters in the kit.
3. Connect the microphone to the music center without using the middle or through the adapter.
4. Hide the music center. Once you need to activate the microphone input.
5. Turn off the microphone. Vimoviti in the microphone test the phrase: "One, two, three, chotiri, five". The speakers have a bit of sound.
6. At doyakyh musical centers, a microphone control is transferred. Adjust sensitiveness, but the voice was kindly sensitive, and the system did not whistle.

Drotovy microphone is included to a special socket

Note. There is a sensitive whistle in the speakers, it is recommended to go through the microphone from the speakers or ringing bell pidsiluvach enter the self-excitation mode.

Connecting a mouthless microphone

Zavdannya: a mouthless microphone is attached. It is necessary to organize the sound suprovid of the evening.

As a rule, a mouthless microphone is a radio transmitting little effort, but it transmits a voice to base station... The receiver will reject the signal and transmit it through the line output to the driver. Vikoristannya okremogo radio channel will allow you to prevent the sound, theft from pereskod.

To know: a radio microphone from the base station, a connecting cable from the base station to the music center, a transition cable from the base station.

Sho robiti:

1. Vivchit to the base station, to know how the sound comes out. Most of the "mini-jack" jacks are signed as AUDIO OUT.
2. Visit the microphone for the music center. There can be a lot of "jack" or "mini-jack".
3. Add extra cables and connectors. For example, the adapter from the "mini-jack" plug of the base station to the "jack" socket and the "jack" - "jack" cable. As the music center picks up "mini-jack", then the adapter "jack" - "mini-jack" is also required.
4. Hide the music center and activate the microphone input.
5. Turn off the base station, turn off the microphone and change the sound.
6. Nalashtuvati as much as possible at the entrances of the musical center (which is such a regulator є).

Mouthless microphone. Connect base station

Yak connect FM modulator to the music center

Management: it is necessary to connect an FM modulator to the music center to listen to the music.

An FM modulator is a radio transmission, which is a code of sound that goes to its input, into a radio signal with frequency modulation (FM) and a type of sound into an ether. The whole signal can be accepted as an FM radio receiver, as the radio station itself, if it is a bit in the speakers. For sale є models, designations for a car - to be installed in the socket of a cigarette, on board a flash drive. Use FM modulators for smartphones - fit into the headphone jack.

FM modulator plugs into the headphone jack

It is required: FM-modulator, liveness, sound (flash drive or smartphone).

Sho robiti:

1. Turn on the music center in FM mode.
2. Nalashtuvati musical center on the frequency of de-moving stations (approximately in the region of 88 MHz).
3. Vivchit and instructions to the FM-modulator, but only the frequency of the transmission.
4. Increase the FM modulator and adjust the frequency of its transmission closer to the frequency, the yak is set to receive.
5. Hide the music production.
6. Pidlashtuvati priymach music center, chuchi music.

Vikoristovuchi FM-modulator

• In the rest of the rock near the great places of FM-ether, it is even more populated, it’s important to know this channel.
• The quality of the sound is low.
• Industrial pereshkodi strongly pour into the radio channel, the dynamics have a bit - pereshkodi and tricky. It is especially important when installed in machines.

Video: FM modulator and music center

Yak connect light-music to the music center

Svitlomuzika is an electronic installation that transforms sounds on the light of lamps in a bright color and color.

Head: organizing the music of the home disco, de gree musical center.

Svitlomuzichne installation with a microphone

Whenever there is a soundtrack, there are sounds through a microphone, some plugs are not needed, just put the case in order with the column.

Svitlomuzichne installation with connections to dynamics

Since the light-sounding is intended for connecting to the dynamos, it is recommended to connect it in parallel to one of the speakers of the music center - the cable can be connected directly to the hubs.

Svitlomuzichna installation with a line entrance

Bagato svitlomuziki is equipped with a line input, so it can be easily connected through a standard RCA connector.

Line connection to the center to provide a signal for light music

Popular for radianskih hours of light music "Oreol" on the body of a small p'yatishtirkove socket SG-5, which is called DIN in the foreign literature. Connect the device to the music center, you need to connect the RCA - DIN adapter for the circuit, which can be supplied.

Scheme z'єdnan roses'єmіv RCA and DIN

Things to know: two RCA tulips, one DIN plug, a cable (you can take a stereo cable with tulips by connecting the plugs to one end).

Sho robiti:

1. Take an RCA cable and cut the tulips from one side.
2. Clean out the guides from the sideways.
3. Providers who go through the central contacts of the RCA plugs by soldering through the contacts 3 and 5 of the five-pin plug.
4. Offense to the guides from the RCA peel contacts, twist and solder at once with a pin 2 DIN plugs.
5. Change the light-and-music installation to the robot.

Yak connect the Vinilovy Progravach to the Musical Center

Head: connect to the music center for programs of vinyl discs (gramplatvok).

Unimportant to the dominance of digital music, vinil is still alive, happy viconavtsi, like and earlier, release albums on platyvkas (hopefully in small circulations). Vinilovy progravach is a constant companion who makes himself a DJ.

Required: programmer, stereo RCA - RCA cable.

Sho robiti:

1. Connect the RCA cable to the player. Most often, the roses of the line exit are located at the rear end of the line, the slots of the LINE OUT signature, or designated by the letters L and R.
2. Another tip is to connect the RCA cable to the line input of the music center.
3. Put the plate on the disk and add the video.
4. Aktivuvati line-in at the musical center.
5. Enjoy the "warm analog" sound.

Sound at the center is supplied through a standard line input

Video: ION Audio programmer

Yak switch miksher to the music center

Mixer is an electronic adjustment, designations for the integration of different signals from a single sound stream, as well as control of signals.

Head: Organize school attendance with the director's head, head teacher of that self-help, and end with a disco.

To know: a mixing console, a laptop, portable and radio microphones, cables.

A good mixer of the possession of the necessary ports for the input and output of the signal is not important.

Zrazkov's connection scheme is brought up to the little one.

The sound from the line output of the mixer comes to the input of the music center

Sho robiti:

1. It is recommended to connect a mixer to the music center via RCA rose. A ready (change) signal is transmitted from the mixer through the main output MAIN OUT.
2. Slide from the main output of the mixer from the line input of the music center through the RCA cable.
3. Connect to the mixer and the sound attachment.
4. Include live music center and mixer.
5. Revision the sound of the annexes.
6. Nalashtuvati channels of the mixer for consumer.

Video: yak switch miksher

Yak zrobiti antenna for the musical center

Zavdannya: zrobiti antenna for vbudovannym in the music center radio. Antenna, connected to the music center, can be painted with radio stations.

Z'adnuvachi for connecting antennas is located at the back of the music center. The butt is aimed at the little one.

The radiohvil vikorist music center for skin appearance has its own antenna

For the reception of radio stations on the middle level, a frame antenna is victorious. Call the won to be included in the set of the musical center. On the current day, the mid-twilight efir mayzhe empty, for example, the Moscow region lost three stations.

Naiprostisha antenna for FM receiver

Nayprost_sha antenna є a dart with a dart, but a little bit close. FM-range - a few meters of hvily, that is, when a single-core electrical conductor is close to 75 cm with a diameter of 1.5 mm. It is necessary to clean the dart board and insert it into the center of the coaxial rose on the building of the music center.

Note. Perfection can take standard z'єdnuvach from TV antennas, solder the wire to the new one and place the plug at the socket of the music center.

TV antenna for FM receiver

If you go by hand, the TV room antenna is available, or a stationary antenna is available, it can also be used to reduce the received signals from FM stations. Slide plug the antenna to the socket of the music center.

Note. Do not follow the miracles into a dart. As long as your radio signal is weak, you will not catch more beautifully.

Video: Antenna for FM radio from old TV antennas

Do not go to Wikidati to visit the Music Center because of cassettes or CDs. To navigate the current digital light with analogue speakers from the speakers know your place at home, at the school at the dachas - skryz, it is necessary to sound a great space. As a show practice, 90% of popular attachments (smartphones, mp3-players, microphones and headphones) can be connected to the musical center and this year, but not vimagatime sutta-vih vitrat. Sufficient supply of a suitable cable, which is on sale є without.

Yak switchboard music center?

Have statti mi rozpovimo, like plug in the music center to the computer. To be careful in order to feel the love of speech, so bi-moving, at all times, even far not to expect a musical center to satisfy the consumers of music lovers. And with a sound card on your computer, your favorite compositions will sound in a new way: more yaskravish and yakisnishe.

Pidklyuchaumo Musical Center to the computer

For connection you need a special cord. Vin is called "tulip", and it is melodiously rich in hto about a new Chuv. You can buy it practically at a leather store on the market. When buying a cord, secure the model of your musical center, fragments of the cord size are responsible for the size of the technology.

Then, having removed the required cord, insert one of these at the roses of the musical center (the whole range of roses may be found in the small ones, depending on the individual design of your technology). Another kinets maє is standard rose'єm - so the titles are "jack". Win is inserted into the socket for storage devices, or you can go into the socket for headphones.

Having plugged in the cord with a given rank, you don't need to start the music center and insert the sound (with a button, which turns on the sound of the AUX TV set). Or you can press the "Function" button and vibrate the "Audio in" (soundness in front of the tim, like plugging in the cord, then reduce to the minimum).

Vivodimo sound to the computer

To bring the sound from the music center to the computer, to work with such simple manipulations. First of all, find a microphone socket or the headphone jack from the blue socket on the computer for an additional audio-jack cord. Call danish cable not included in the set of the musical center.

Give the "Function" button, and then either "CD", "TAPE" or "TUNER / BAND" Now you can calmly enjoy your favorite compositions both on computers and on the music center.

Yak bachite, at the plugged in is a mute folding one. And if, for some reason, you cannot know the necessary cord, it can be done independently.

The cord is self-contained

You know: a 3.5 cable, audio / video input, and a simple tulip-type cable. The cable has 3.5 strips of darts and two darts for each file. Now I solder two wires, one by one, to the metal base of the audio / video. It is also necessary to solder two wires, which have been overloaded, to the last contacts. Let's use the scrap metal base with plastic materials with hand for you (insulating tape, scotch tape, etc.) rear body two entries are written "AUX". We take the "tulip" cable, which is attached from the side of the connectors to the self-contained cable, and the latter - to the computer. Now you can listen to the music, for which you can learn the creation of compositions on the computer, and vibrate the "AUX" button on the music center.

First of all, we have a lot of respect for cords of the "tulip" type. Dani cords are used from gilded files and vvazhayutsya thoroughly. The "tulip" qualification will give you the quality of sounding on the special professional possession... However, it’s uncomfortable to see it at home-based music centers at home’s minds. Kostu such a cord is very expensive, so it’s not a good idea to turn on a new one, but it’s safe to buy an extravagant "tulip", if only you are not a professional sound engineer, like a bunch of extra cord for special possession.