Privit all blog readers. Often at the pockets of the koristuvachs of the computer, Vinikє has a problem with the robot hard disk, So as wrongly displayed modes of the robots of Winchester.
Modern motherboard pay for the connection by the host controller for connecting the accumulators to the interface Serial ATA (SATA). At the same time, however, it is often a separate controller for building hard drives and old hard drives and other types of storage in the interface Parallel ATA(PATA or IDE). Yak correctly displaying the mode is visible for the current year. BIOS, Vaughn basic introduction system - vivedennya, I will secure a cob of secured computer and give the operating system the ability to work with it.
Zokrem, itself in BIOS Get ready vmikati abo vimikati bagatokh attachments - for example, hard drives.

Instructions

1. at connected hard disk BIOS make a start on your own,
Any problems with tsim are not guilty.
If I’m looking at it, I’ll look at it as soon as possible. old IDE and new SATA, to reconfigure the settings and, if necessary, update required. Yakshcho earlier bully vistavleni IDE Then disk SATA beat the computer, ale pratsyuvati winchester will be significant more, Nіzh is guilty.
2. Add SCHOB to settings BIOS be - like a change, in the basic system of introduction-delivery
a little bit of the need to escape. Call at the start of the computer, there is a prompt - for example,
Press F2 to enter setup.

Since there are no such tales, try the keyboard keys:
Del, Esc, F1, F2, F3, F10. In the form of victorious combinations of keys, for example: Ctrl + Alt + Esc,
Ctrl + Alt + Del, Ctrl + Alt + Ins, Fn + F1.
3. For the entrance to BIOS it is necessary to know the required line for the adjustment.
I’ll look at the version BIOS rattle різні.Shutter on the puzzle tabs SATA, IDE,AHCI. Know that oh, change e IDE on the SATA by the way to the choice of the necessary value from the list. Required value can be designated as SATA AHCI MODE abo AHCI MODE.

For kids, you just need to see the point. IDE value disabled (Included),
and at SATA put enabled(Included).
4. To set the required values save snakes, pulling on F10.
At the end of the day Yes or introduce Y and pressure Enter.
The drive will be repaired in the required mode.
5. Inodi koristuvach get remembered in BIOS value SATA on the IDE, so yak at
check install the OS the system is about those who are not known hard drive.
Cause scream outside on the installation disk SATA drivers.
One of the options for resolving the problem є time clock disc transfer in IDE - mode,
if it’s right, you’ll just know the new one Instalation disc from Windows.
On disks with Windows 7 and Windows XPSP3 given a problem no matter what.
6. If you do not go, then try on IDE put lorry in mode cable select,

a SATA in mode AUTO, todі the computer itself will set the priorities.
7. Do not forget about those who have SATA - disksіnshy roses'єm live,

Nіzh near disks z IDE - interface.

To connect you can know the live link.
8. Jumpers on SATA drives do not miss a date until position disk
(primari abo slave). Given a jumper є we will interconnect shvidkosti transmission
tribute for the amount of money oldies"Motherboards.

Yak optimally nalashtuvati BIOS, read

Privit all blog readers. Often the cobblers of the Winchester computer have a problem with the hard disk robot, since the Winchester robots have incorrectly displayed the modes.
Modern motherboard pay for the connection by the host controller for connecting the accumulators to the interface Serial ATA (SATA). At the same time, however, it is often a separate controller for building hard drives and old hard drives and other types of storage in the interface Parallel ATA(PATA or IDE). Yak correctly displaying the mode is visible for the current year. BIOS, Vaughn basic introduction system - vivedennya, I will secure a cob of secured computer and give the operating system the ability to work with it.
Zokrem, itself in BIOS Get ready vmikati abo vimikati bagatokh attachments - for example, hard drives.

Instructions

1. When the hard disk is connected BIOS make a start on your own,
Any problems with tsim are not guilty.
If I’m looking at it, I’ll look at it as soon as possible. old IDE and new SATA, to reconfigure the settings and, if necessary, update required. Yakshcho earlier bully vistavleni IDE Then disk SATA beat the computer, ale pratsyuvati winchester will be significant more, Nіzh is guilty.
2. Add SCHOB to settings BIOS be - like a change, in the basic system of introduction-delivery
a little bit of the need to escape. Call at the start of the computer, there is a prompt - for example,
Press F2 to enter setup.

Since there are no such tales, try the keyboard keys:
Del, Esc, F1, F2, F3, F10. In the form of victorious combinations of keys, for example: Ctrl + Alt + Esc,
Ctrl + Alt + Del, Ctrl + Alt + Ins, Fn + F1.
3. For the entrance to BIOS it is necessary to know the required line for the adjustment.
I’ll look at the version BIOS rattle різні.Shutter on the puzzle tabs SATA, IDE,AHCI. Know that oh, change e IDE on the SATA by the way to the choice of the necessary value from the list. Required value can be designated as SATA AHCI MODE abo AHCI MODE.

For kids, you just need to see the point. IDE value disabled (Included),
and at SATA put enabled(Included).
4. To set the required values save snakes, pulling on F10.
At the end of the day Yes or introduce Y and pressure Enter.
The drive will be repaired in the required mode.
5. Inodi koristuvach get remembered in BIOS value SATA on the IDE, so yak at
check install the OS the system is about those who are not known hard drive.
Cause scream outside on the installation disk SATA drivers.
One of the options for resolving the problem є time clock disc transfer in IDE - mode,
If it’s right, you’ll just know the new Windows Installer disk.
On disks with Windows 7 and Windows XPSP3 is given a problem not to be detected.
6. If you do not go, then try on IDE put lorry in mode cable select,

a SATA in mode AUTO, todі the computer itself will set the priorities.
7. Do not forget about those who have SATA - disksіnshy roses'єm live,

Nіzh near disks z IDE - interface.

To connect you can know the live link.
8. Jumpers on SATA drives do not miss a date until position disk
(primari abo slave). Given a jumper є we will interconnect shvidkosti transmission
tribute for the amount of money oldies"Motherboards.

Yak optimally nalashtuvati BIOS, read

Yak clean up vіkno this disc inclusions in the bios menu of the computer "on the hour of installing Windows

Pid hour of Windows installation "Switch between the controller of this disk of inclusions in the bios menu of the computer"

It takes an hour to spend an hour when installing Windows on the stage, if you need to vibrate the hard disk, if Windows is installed, there will be a pardon "Switch over the controller of this disk in the bios menu of the computer." Naturally, the setting is not found.

pardon text

Checking out the statistics means you have a problem with the hard disk controller.

What is the pardon for?

Variants of viniknennya povidomlennya "Change the controller of this disk of inclusions in the bios menu of the computer" kіlka.

One of the most error-prone settings in the BIOS is the hard disk robot mode. Є two main modes - Achi and IDE, about which they wrote in the statistics.

Just an hour later, on new motherboards, you will see a pardon with the UEFI / BIOS boot mode option.

Mensh is often, but also the same situation. Tse postkodzhennya zavantazhvalnogo recording of a hard disk and in any case will be required її update.

Yak vypraviti "Cross the controller of the given disk of inclusions in the bios menu of the computer"?

Variants of the given problem of style, style and reasons.

Hard disk robotic mode is required for the cob. If it's worth IDE (Compatible) (Native Mode), then enable AHCI, and if it's worth AHCI, then switch to IDE (Compatible) (Native Mode).

Yak zmіniti sposіb robots hard disk - option 1

Yak change sposib robots hard disk - option 6

Yak zmnity sposib robots hard disk - option 5

Yak change sposib robots hard disk - option 4

Yak change sposib robots hard disk - option 3

Yak change sposib robots hard disk - option 2

If it didn’t help, then it’s easy to reconvert the UEFI / BIOS boot mode option. Yaksho won є, then put the їy value "legacy" or "Legacy First".

Yak zmіniti sposib zavantazhennya on Legacy

For all the changes in the BIOS, do not forget to use the F10 button.

Remaining option varto try to revise and update new hard disk recording.

For a complete press "shift" + "F10" when there is a pause "Cross the controller of this disc of inclusions in the bios menu of the computer". Tsim vi start the console.

Updating the envoy to a recording via the console

• bootrec / fixmbr;
• bootrec / fixboot;
• bootrec / RebuildBcd.

Great way see the author of the article-zrobiti repost to your side

I have more than once in my articles zgaduvav about SSD disk x, talking about those who stink shvid more zvychaykh і from їkh you can upgrade your computer. І okay b іх installation is trivial rіch, but it can be simpler, know the old hard drive, install a new SSD , Reinstall on new Windows and radio, but for the rest it's not so simple. On the right, in order to maximize the speed of the SSD disk (and for sure), you need to switch to AHCI (Advanced Host Controller Interface) mode in BIOS. The first axis can be a surprise here ...

Otzhe, Mayu old computer, Yakyyvirіshiv upgrade and install the SSD drive. In BIOS by jumpering the AHCI mode. For a whole series of entries in BIOS (press the Del button or F2 (you can use the buttons and mother's pay), When the computer is on) in the "Main" menu, vibrate "Sata Configuration".

І in "Configure Sata as" vibration "AHCI"

Save the settings by restarting the computer and starting the Windows installation. Ale is not here that bulo, there was a pity:

After checking the BIOS settings, navigate new version , The result was one-time-by-time pardon. In the case, I have entered the BIOS in the IDE mode and installed Windows.
The installation was successful, then I finally tried to switch to AHCI mode in BIOS, but another trick was not going into Windows, I just didn’t use it (in principle, I checked out a similar result). Todi I see it this way - switch back to IDE mode, go to Windows and in the editor, change the mode to ACHI.

Having turned the IDE mode, Windows has successfully locked up, now it is necessary to update the changes in the registry. For a complete open the registry editor - type "Win" + "R" keys and enter regedit.

At the editor, go to the re-register on the way "HKEY_LOCAL_MACHINE \ System \ CurrentControlSet \ Services \ Msahci", know the "Start" parameter, open it with the subkey. Enter "0" in the "Value" field.

That's it, the system can be re-enabled and set to AHCI mode in BIOS. As a result, everything started to work, the SSD disk was turned into ACHI Windows mode and it was successfully applied as soon as it could be done with an extraordinary hard disk.

So, as long as your old computer stopped you, you are happy with your robots. SSD installation disk, on my look, Ideal solution... It is not necessary to forget about the minimum size operational memory- 2GB well and the processor bazhano 2 cores hocha b at 2 GHz.

Thank you, the article helped you to find the pardons:

Windows cannot be installed on this disc. possessed this computer will not be copied from this disc. Perekonayte, scho controller of the given disk of inclusions in the BIOS menu of the computer.

I helped you upgrade your computer and improve your accessibility and support.

Modern hard drives are connected to the motherboard and computer attachments for help SATA interface, Scho transfer to the robot, zokrem, in IDE and AHCI modes. IDE is an old mode, which is necessary for securing the confusion with old accessories and programs. The AHCI mode is probably not a new trend in the IT sphere, it appeared in 2004, but the mechanism is still relevant for today's day connecting hard disks behind the additional interface SATA II and SATA III. AHCI has a number of rewires before IDE є:

• Possibility of connecting to the motherboard more attachments;
• a hard disk robot with the maximum possible speed;
• so called "hot replacement" of hard drives, so that you can connect and connect without the need for a computer;
• Adoption of NCQ technology, which increases the productivity of hard drives in the minds of problem solving.

SATA mode is enabled in BIOS. On modern laptops, the AHCI mode, as a rule, displays for the users. And the axis of the new motherboard for PCs can be supplied with an active IDE mode with the added convenience. You can change IDE to AHCI (or navpacks) at any moment in the BIOS of computers, so that the robot can adapt both modes. Not all computers can accept AHCI, but more of them, some of them, some of them have a normal operating mode for 12 years. Until the last few days, rare rare attachments, introduced to the market, apparently, until the AHCI appears. If a computer is less than 12 years old, if I adapt AHCI, with switching to the whole mode, all one can detect problems through the visibility of the current settings in the old BIOS version. In such cases, you need to check the power supply from the BIOS updates.

1. Yak diznatisya, which mode - IDE or AHCI - installs at a time

Know that the mode is IDE or AHCI - active on the computer at a given moment, it is possible in the dispatcher Windows add-ons... Open the window:

• "IDE ATA / ATAPI Controllers" for Windows 8.1 and 10;
• "IDE ATA / ATAPI controllers" for Windows 7.

Also hard drives of the computer are connected for the additional AHCI mode, in addition to the attachment there will be a SATA AHCI controller.

As soon as the computer is in the active IDE mode, in the meantime, there is a record, apparently, about IDE controllers.

alternative way- utility test AS SSD Benchmark for testing the speed of robots and hard drives. Also hard drives can be used in AHCI mode, or in the BIOS for IDE displays, the utility can be used to change the values ​​of the "pciide BAD" red color.

As the computer is working in AHCI mode, at the disposal of the utility the green color "storahci - Ok" is also important.

There are two ways to give the power of intelligence, such as a mode of establishment at a given moment. If it is necessary, if the AHCI mode has been implemented in the BIOS, it is necessary to avoid and see the possibility of AHCI operation. Vibration modes in robots and SATA in new versions BIOS can be upgraded to "Advanced" or "Main". For example, in the BIOS UEFI motherboard pay Asus In the “Advanced” section, you need to go to the “SATA Configuration” section and open the “SATA Mode” option.

Іnshy butt - BIOS AMI (V17.9) motherboard pay MSI, Everything here is foldable, and not skinny. The “Integrated Peripherals” section needs to vibrate the “On-Chip ATA Devices” section, and in the new one - “Raid Mode”, which is the transmission of vibration modes when connected to hard drives.

2. Tastes of mixing to the AHCI mode for Windows robots

Also, change the IDE mode to AHCI is possible at any moment in adjusted BIOS... Axis only for robots windows such a go is not matime, there is a slight oversight when starting through automatic installation required drivers, Yak when replacing the components of the computer. It is not possible to navigate in any kind of drop-down from the bindings to the component parts of the computer beyond the standard Windows utilities Sysprep, yak at vipadku with replacement of the motherboard or processor. Change to IDE mode on AHCI leads to serious legacy - Windows just won't start anymore. As a result, otrimaєmo abo blue screen death, or cyclical re-installation of Windows in case of incorrect system startup.

On the right, in order to register IDE and AHCI when installing Windows, it should be written to the Windows registry. For robotic hard drives in AHCI mode, a special driver is required, which will automatically be installed at the same time with Windows versions, repaired with Vista. Oskilki AHCI mode has appeared from Windows XP, the AHCI driver in the distribution kit of the whole system version is necessary to integrate it first, having taken it from the disk with the motherboard drivers or downloaded it from the Internet.

In the ideal of switching to the AHCI mode, it is necessary to get involved before installing any reinstalling Windows... Alle, there are ways to activate AHCI without the need to reinstall Windows - for the additional launch of the safe mode or editing the system registry. The methods are lower for Windows 7, 8.1 and 10.

3. Requirements go in and order go

In principle, whether experimenting with Windows can lead to undesirable results, or even to methods of adaptation operating systems the AHCI regime needs to be given a special conscientiousness. Oscillations in a whole range of settings will be destroyed, which will be added to the health of the system and will be blocked. It is categorically to take steps to start up until the end of the week without any emergency preparation beforehand. It is necessary to either write or install and install Windows Installer. For the rest, you can go to an extreme error or start the process of reinstalling Windows.

The order is as follows:

• Croc 1 - reconversion of AHCI enabled settings in BIOS;
• Krok 2 - emergency preparation;
• Krok 3 - in the opposite way, or setting up the offensive launch of the system in a safe mode, or editing the system registry;
• Croc 4 - re-engaging, entering the BIOS and enabling the AHCI mode;
• Krok 5 - starting the computer.

4. Windowsless mode

The first method of insurance for those who enter the security windows mode the AHCI driver will be installed automatically. Ale, unfortunately, the spratsyutse is not in the skin. In the case of dual systems, it is necessary to establish offensive launch in safe mode, vikonati rewiring, go to BIOS and vistavity mode AHCI. To start the computer in a safe mode, the AHCI driver is responsible for getting up. If you go through everything successfully, you will only need to re-enable the system in the robotic mode.

Universalny way to enter security mode with offensive locked Windows for all current versions systems - utility msconfig, due to the help of the command "Viconati".

5. Redirecting Windows Registry

Yaksho sposib s ovenless mode Without spratsyuvav, uniqueness of the reinstallation of the system can be done by way of the re-installation of the register. To run the editor in the "Viconati" command field enter:

4.1 Redirecting Windows 8.1 and 10

HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services

At the tsіy gіltsі shukaєmo folder "iaStorV", robimo click on nіy, the parameter "Start" is displayed and the value will be set to "0". Tisnemo "Ok".

The "iaStorV" folder is opened, the "StartOverride" folder is visible, the "0" parameter is displayed and the value "0" is displayed. Tisnemo "Ok".

Omitting below the alphabet and we know the folder "storahci". Robimo clicks on niy, the parameter "ErrorControl" is visible. Pick-up factory "3" and replace new write "0". Tisnemo "Ok".

4.2. Redirecting Windows 7 Registry

At the editor's window, the redistribution of the file:

HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ services

The folder "iaStorV" is known at the giltsy, but a click on it, the "Start" parameter is displayed and the value "0" will be set. Tisnemo "Ok".

Writing to rewrite the re-enable the computer, go into the BIOS, the AHCI mode is active and the system is started.

6. Windows will not be tampered with

As soon as it is necessary because of the ways not to adapt Windows for robots in AHCI mode, the system will need to be reinstalled. If I’m running Windows, I can run it, if, for example, you need to adjust the installed software, or to save important files in the over-the-top computer, so that you can save it on the C drive.

However, you can trap, so that the system cannot be locked in AHCI mode, or in IDE. Like the blue screen, death is not there, the ale versions of Windows 8.1 and 10 will be cyclically rewired, the screen is visible with the words "Automatic update", embossed "Advanced parameters".

Changed in the menu "Vibir diy", pass the way, instructions on the screen below, and show the update to the control point.

Whenever the computer is locked up, the blue screen of death appears, Windows Windows and at the stage of the system installation, vibrate at the bottom with the option "System update".

Having eaten in the menu "Vibir diy", I prophesied crocs, descriptions of food.

vibrated sposib backup copy for the help of third-party software, it is obvious that sealed nose program-backup.

Good day to you!