One of the most popular router models on the domestic market. In the basis of wide popularity - a reasonable balance to make an effortful signal, affordable prices and ease of installation. However, their own nuances are blamed and here - the middle of the widest food is traditionally called tuning.

You need to update the software security of your router

Vіdrazu lie vrahuvati - regularly updated software playing an important role for a stable efficient work skin router. Obov'azkovoy umovoy for which flock of robots current version ON.

In the other case, the number of different software failures is noticeably increasing - in addition, you can guess about the hang-up, I’ll build the wrong functionality and that’s it. Therefore, when the streaming version of the software becomes obsolete, the next step is to update the firmware - we can look at it effectively for that.

Let's go to the firmware - a simple order for diy

The installation is carried out in the following order:

How to check the practicality of the router after firmware and upgrade

Dali, let's move on to the final stage of the firmware of the router - having protested and having changed in practice. For the sake of this procedure, we should be responsible for allowing access to the Internet. For whom do we try this order of testing:

• Turn on the computer and router.
• Follow up, if the connection is completed.
• It fails to run one installed browsers on your computer. Enter any site in the address bar of the browser.
• After 10-15 seconds, the website is to blame.
• As soon as the firmware and setup were successful, it will be possible to re-launch and review the sites, in a different way, repeat the firmware and upgrade procedures, having changed at the time of pardons.

ASUS is a well-established electronics manufacturer with good characteristics, including modems for Internet access. Ale, be it an attachment of some type, it is necessary to adjust the parameters of the provider, with which the contract for the service of the call was laid.

This instruction will give you a guide to the power, how to configure the asus rt g32 router, if you remember that the configuration algorithm and the interface of the add-on are similar, this article will be relevant to all purchases of ASUS modems with pwidtrim.

Preparing for lashing

The technical preparation of the router before the installation is completed in the following steps:

1. Connect to the Asus rt-g32 the power supply unit and add it to the power grid.
2. Connect the Ethernet cable to the modem with the inscription “WAN”, provided by the provider.
3. Connect the router port labeled "LAN1" with the computer's motherboard card behind an additional Ethernet cable, which is included in the Wi-Fi modem kit.
4. Throw off the adjustment of the Asus rt g32 on the factory way by pushing and pressing for ten seconds with the "Reset" button embedded in the case.

Computer setup

Often, the characteristics of a computer's tiled card are manually configured for other connections. For robots with a Wi-Fi router asus rt g32, you need to adjust the map:

1. Open the division lace stitching OS. For example, for Windows 7, it is necessary to open the window, point to the stepping baby (found in the control panel), de click on the message message.

2. Go to the authority of the connection by right-clicking on the icon and selecting the appropriate menu item, what.

3. Vіdkriti "Vlastivostі" point, vkazan on the offensive baby:

4. Set the value of the characteristics of the protocol, as assigned to the little one:

Repeat the procedure for other connections, even if there is a stench.

Setting up a router

To configure your asus rt-g32 to configure your ISP, follow the instructions below:
1. Start any browser, enter the address 192.168.1.1 and go to the new one.
2. When choosing the authorization dialog, enter “admin” in both fields and click on “Vdpravity”

3. Click on the button "To the main page"

4. The software shell of the Wi-Fi router asus rt g32 supports Russian language, select yoga in the "Mova" field.

5. To configure options for access to the global network, click on the “WAN” main menu item.
6. Find out the connection type from your call operator.

7. If the provider provides the Internet for dynamic IP technology, then nothing is needed on the WAN side. Click on the "Accept" button.
8. If the Internet is relying on the static IP technology, then in the "WAN connection type" item, select the appropriate type and save the data, remove the provider's type, form all the fields and click on "Accept".

9. If you select the type of connection PPPoE, enter a different IP address automatically or fill in the address field, as well as the PIN of the provider to the Internet. W fill in the fields of the division “Nalashtuvannya oblіkovogo record and with the data assigned in the contract for the call service, and in the MTU field, enter the value 1472 and click on "Accept".

11. Stop the changes and set up the wifi module for a wireless connection. If this option is not required, please reconfigure the modem and connect to the Internet.

Wi-Fi setup

To set characteristics jetless access open the main menu tab "Rotless mesh" in the global tile. De-install the next parameters:

1. In the "SSID" field, enter the name of the Wi-Fi network on the subscriber's outbuildings. It can be added, but it can only be formed from numbers, signs and letters of the Latin alphabet.
2. Highlight the "Prior SSID" parameter if you want to speed up your wifi network for unauthorized access. When activated, the setting will attach your network to subscribers, and you can connect to it only if you know exactly their names.
3. In the row "Authenticity verification method" set "WPA-Personal". And in the "WPA Encryption" row, select "TKIP". The most well-recommended and widely zastosovuyutsya ways to protect merezhi.
4. Row "Front WPA Key" to replace the password, which you enter when logging in to your wifi network. The length of the code combination is due to no less than eight characters, it is allowed to choose characters.
5. To fix it, press “Zastosuvati”.

For this reason, the setup of the asus rt g32 is over, it has only lost its ability to re-engage and connect with the Internet, both via a wired interface, and via Wi-Fi.

Did you know a friend's pardon? View text and press Ctrl + Enter

Since you recently became the master of the Asus RT G32 router and encountered these and other problems during the connection and installation, then you went to the original site. In this article, we can see the most parts of the problem, With which you should be aware when setting up this router, and also tell about tricky exploitation.

For the first time, it is necessary to confirm the language of the provider with the onset of specific configuration, which will be entered without delay during the time of the adjustment: protocol (PPTP, L2TP, PPPoE), IP authority (static or dynamic, automatically or manually enabled IP and DNS), and also aka vіdsutnіst) linking the merging card by MAC address. Also, do not start the recognition, which set a special login and password to enter the control panel of the router.

In the advancing krotsі our way to lie in the power of connection to local lines (Control panel - Center for management of measures and access- our Internet connection - click on the new left mouse button - Power). Click "Internet protocol version 4 (TCP / IPv4), click on" Authority ". Click on the tab "Zagalni" "Set IP address automatically" and "Set DNS server address automatically". Click "OK".

At this point, you are already guilty of connecting the Ethernet cable from the computer to the router, to the LAN 1 socket. It is recommended to reset the settings before the first setup - it’s even easier to fight: press the Reset button for 10 seconds.

The site will require authentication - login and password. If your provider has not set any specific data, then enter the standard - admin in the login and admin in the password. Also, the information behind the login and password in the router control panel can be found on the bottom of the router.

After all operations, we will consume. In the first line, please indicate the protocol of your operator on the tab "WAN" in the row "Type of WAN connection". If the address is given automatically - everything is filled up. If IP addresses and DNS need to be registered manually, then check the "No" checkbox in "Automatically assign WAN IP address?" and below enter the parameters.

The fitting of the main part is completed. now - WiFi setup. Tse tab "Bezdrotova merezha" - "Zagalni".

• SSID - name of your router;
• Attach SSID - what is required to display the router name?
• Country code - choose your country;
• mode dartless mesh, The width of the channel - zalishaєmo yak є;
• Channel - set it to be as it should be, vіdminny vіd automatic or first - optimally 6 or 9. Qia installation to help you speed up your wireless Internet connection;
• Expansion channel - zalishaєmo yak є;
• The authentication method is WEP, WPA or WPA2. The most recent is WPA2, so we put yoga. Inshi nalashtuvannya - for zamovchuvannyam.

You can also enter your own password in the "Forward WPA Key" field. Everything is on this side - you can press "Zastosuvati".

Now let's go to "Administration", under pressure "Re-appointment" and "Departure". The router will be re-ready until the robot is re-uploaded.

That's all we wanted to tell you about the upgrade of the router for this model. If you have lost some food - ask them in the comments and we obov'yazkovo on them vodpovimo. See you on the sides of our site!

You know, the price of Asus RT-G32 version C1, which was tested by Russian providers (I want to believe in the price of force). I don’t in any way use this router, because with the standard firmware, it’s unstable and even better.

Alemeni vin as if I were gone. One fine day, they brought me my router and asked me to work with it, so that the wine would be normal, chuckling, I said that I could try to install DD-WRT, but I can’t guarantee a stable robot, so budget device, Yakiy not varto vikoristovuvati yak SOHO solution.

Marveling at the new respect, I guessed something .. By the distant 2011, we were working as operators in quiet podtrimki, and we were alive as we could ...

Peredmova

And we survived only because of the fact that the Internet was blocked by the core on our service PCs. And yet we are smart, not shattered by a finger, and we began to practice the selection of special laptops at work at the evening hour, and in the capacity of a router, for distributing the Internet, they victorious yoga. And so, like the deacons of the "team" loved to feast with torrents, the speed of our Internet was very good.
After blocking this “team” on the router and sending it to the coudi, it was decided to put it on the router more stable, and choose WIVE-NG-RTNL. The axis of this and that was written by the article (if there is revision b1).

What exactly is C1?

as you could remember, the same article about the other article about this zalіzyaka, but in the front, old article, revision B1 is being created, and we have revision C1.

Now, reader, take your router in hand, and look at the sticker: if there is a record H / W ver .: C1, then you can continue reading these articles , yakscho there schos іnche, otherwise there is simply no way to record it - close this article!

It's important that the router can get out of hand! Ale, everything is fine and everything converges - we can continue.

description

Well, now let's talk about the firmware of this add-on.

Why not DD-WRT? Since this router works on the basis of the Ralink RT3050F chip, just go to dd-wrt.com and get the firmware we don’t see, so it’s just not possible (I want to make a mistake). If you can say that this firmware is possible, but if you say that the official dd-wrt retailer is not possible, then there are reasons for that.

What is Wife-NG? Wive-NG is a series of firmware for attachments on different chips and different vendors. If you want to upgrade the firmware with DD-WRT, then DD-WRT firmware will show the functionality, and Wive-NG will focus on stable operation in unattended mode, taking maximum flexibility and functionality.

Need to change the firmware? Well, everything is simple. Like you, I read, the power of the robot of your router - do not chip yoga and close this article. If you have to regularly reset your router, otherwise it’s difficult, and you don’t have a lot of pennies on microtik, and if you play DotA just add blue in your beard, then the last chance is the firmware of this router.

Firmware of the router

I'm sorry to say:

As a result, we took an absolutely different router :)

I won’t report on nalashtuvannyah, so before me, a lot of help has already been written, about those, how tse robiti for any provider (I’ll give the request below). Just send me to your account, change the password and login in the admin panel to Admin / Admin (with a capital letter).