You can turn it on in the AHCI mode for dermal koristuvachev, which can be used to increase the flexibility of the computer in robots with hard SATA drives and especially SSD.

The mode allows you to access the computer for the education of an adult education until the date, and for its activation it is necessary to make sure that there are no more simple things to do.

Before you can see the options included in the regime, you can learn from the special features of the principle of robotics.

SHO TAKE AHCI

user interface hard drives SATA, which adapts the transmission speed of data from 1.5 Gb / s up to 6 Gb / s, available in two modes:

1. AHCI.

The first one will get rid of the confusion with the old outbuildings (dug-ups, which were released in 2000 rocks). The ability to navigate the most productive disks in a wide range of modes does not often appear from the quiet old models themselves. Bigger AHCI regime allows you to use all passages SATA interface v generally... For example, to connect and connect disks to the motherboard "for free", without switching on the computer, or because of the possibility of minimally changing the disk heads for increasing the speed of the robot.

Having activated the mode, the keystroke will speed up the launch of files, reading and writing information on disks and increasing the productivity of the computer. I, if the priest may appear not so significant (in the range of 20%), for the people of the enterprise, the polish may appear important. If you have SSD disks with SATA form factor in your robot, this option is one we can effective robots will attach.

IMPORTANT: How can I enable AHCI on an SSD?

If you are in AHCI mode on an SSD drive, you will only reject the result if you have a SATA II / III interface, and there will not be any robots in these drop-downs.

Yak reconversion, chi inclusions mode

If you are trying to turn on the AHCI mode, go to the fact that you don’t want to use computers. If you don’t launch high-performance supplements, you have it in your presence є tighter processor and enough memory, you can simply not remember, in any mode of practice.

Revision, inclusions or not included AHCI, can be done in this way:

1. A list of steps to go to the power of the computer (menu "Start", item "Computer", item "Power" in the context menu);
2. View attachment manager;
3. View IDE ATA / ATAPI controllers;
4. There is a pristіy here, in the name of which є AHCI - the mode of practice. Even though there is no such disk in the list (and you have a rather old Winchester IDE, but rather a lot), the mode will be turned on independently.

Another way to rewire AHCI robots is to rewire the computer and switch to BIOS menu(With the help of one of the available options - for children motherboards If you want to go to the laptop for the most part in the onslaught of functional keys - from Esc to F12).

After using BIOS (or UEFI), switch to SATA mode and know the SATA Mode or SATA Configuration item.

Glad: When the IDE mode is on, you don't have to change it to AHCI right away - especially if you have Windows 7.

Yak turn on AHCI mode

The inclusion of a mode on a computer can be visonano directly from the BIOS.

At the same time, if you have Windows 7, if you try to lock the system on the screen, shvidshe for everything, show up by writing the type 0x0000007B INACCESSABLE_BOOT_DEVICE, showing the unhappiness of the robot with the disk. In some cases, it’s also the situation to get back to Windows 8 and 10, but if you see it less, it’s the most frequent for the computer to start up in the robot, or it’s repaired over and over again.

Calling the situation will be if you vibrate the AHCI mode before installing the system. This will give you the power to secure your software Instalation disc Determination of HDD parameters or SSD in the process of starting the installer, and there will not be any problems with starting the mode.

Foldable can be repaired, only if the system is already installed on the drive, and the key is to change the IDE parameter to SATA and enable NCQ (Native Command Queuing, extended to the SATA protocol, it also improves the order of the robot from the optimized format) In a whole vipadku get to be quick, either as the editor of the registry, or as an unhealthy regime, in the presence of operating systems... It’s impossible to get away with the necessary result, you don’t need to turn on the AHCI and re-install the system.

For Windows 7

One of the most popular operating systems in Denmark, Windows 7, vimagaє for switching to AHCI mode is a quick reestablishment of special utilities. The first option includes the offensive stages:

1. Launching the editor (Win + R for the "Viconati" menu wiki, entered by the command regedit and editable change);

1. Go to distribution HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ services \ msahci;
2. Go to the Start point, which is the value of 3 for the change, and the change to zero;

1. Jumping to the whole section from the msahci point to IastorV and the sound of the Start parameter;
2. Zmіna triki to zero;
3. Close the editor.

Now the computer is overloaded and turned on required mode AHCI in the BIOS menu. pislya entangled Windows systems 7 almost automatically install drivers for all disks connected to the motherboard, and later, you will need to re-enable them to make changes. The last step of setting the mode is the reversal of the included write mode in the power of the disk. If there are no inclusions, the function will start.

Another option is the Microsoft Fix it utility, which allows you to use the new mode for the inclusion of a new mode (you can download it from the official Microsoft website). After launching and selecting a prompt for correcting the problems of supplements, all the necessary changes will be automatically displayed, and there will not be any updates about the pardon.

For Windows 8 and 8.1

If Windows 8 or 8.1 is already installed on the computer, for setting the AHCI mode, you can speed up the non-oven mode. For a certain amount of pardon, it is necessary to:

1. Turn IDE mode to BIOS;
2. restart the computer;
3. Run the command line from the name of the administrator ("Start" / "Use programs" / "Standard");
4. Enter the command bcdedit / set (current) safeboot minimal

1. Press the introduction button;
2. Reload the PC and go to BIOS;
3. Turn on AHCI mode;
4. Run the command row again;
5. Enter the command bcdedit / deletevalue (current) safeboot;
6. Re-restart the system, because Windows OS is guilty by the way of seeing the pardon.

If your system is powered by Intel processors, you can additional option the inclusion of AHCI for additional utilization of the virobnik (for AMD, this is not a good idea).

For yogo victoriannya slid:

1. Add the f6flpy file (driver to the mode) from the official website of Intel, vibrating the version (x32 or x64);
2. Lock the SetupRST.exe file from this resource;
3. View the attachment manager and manually set the authorities of your hard disk new driver f6 AHCI replace SATA;
4. Re-enable PC in BIOS (UEFI), enable AHCI;
5. Run the SetupRST.exe file, which is automatically guilty of the problem.

For Windows 10

Windows 10 for correcting the junk when changing the mode can be used to speed up the utilities for Intel processors, reinstalling the system and in the non-oven mode. Alle the most effective option will be the victorian of the editor of the registry, as it will be shown as a similar method in Windows 7.

To do this, you need to speed up the cym using the following method:

1. Log in to the administrator's system;
2. Run the editor in one of the available ways (simply through the "Viconati" window and the regedit command);
3. Go to the distribution HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ iaStorV and find the Start parameter, which changed its value to 0;
4. To know the parameter of іm'yam 0 in the support service \ iaStorAV \ StartOverride, setting the value to zero for new;
5. Go to Services \ storahci, reset the Start parameter;
6. For Services \ storahci \ StartOverride, set the value to zero for parameter 0.
7. Close the editor and restart the computer;
8. Enter the hour of the system lockup in the BIOS and enable the AHCI mode.

Porada: Recommended by Viconati Pershiy Windows startup 10 in safe mode, for which the option to enable the “Viconati” (Win + R) menu behind the additional menu and the introduction of the msconfig command to display the system configuration settings on the screen. Here, you need to vibrate the "Security" tab and put a tick on the "Safe mode" option by choosing the "Minimalna" option.

Fig. 9. Yak change sposib in the UEFI interface

For a standard BIOS interface, it is possible to go to the new setting by pressing the function key when it is locked. For example, F2 or F12, in the form of motherboard or laptop models, when the setting is carried out for a new one.

Pislya pershoi zh hiding Vindovs 10 stand up all required drivers for robots from AHCI, and there won't be any pardons at all. At the same time, the robots are very fast, especially since the disk has a SATA III interface.

Іnshі specialtiesі mode

For legacy Windows XP, there is no way to install AHCI mode. With the development of such a variant, it is not transferred. I still want to required driver it is easy to know in the pattern and in the system. Instructions for the process can also be found on the Internet, but it is not recommended for them to visit such devices. In the first place, to the processor and to the entire computer, which I will receive only Windows system XP, setting to AHCI mode is unlikely to help you get faster. In another way, the values ​​of the indications between the drivers will increase the value of the pardon, if there may be some data from the disc.

for Windows Vista The process of turning on the mode is the same as for the 7th version of the system - tobto for an additional restructuring or utilization. And Windows NT can be adjusted similarly to the recommendations for XP. Є Variants of drivers and on іnshі systems - from Unix to MacOS, as ssd-drives and SATA are growing in popularity among some systems.

visnovka

In most cases, the AHCI mode will work fine, but the system will work better. Even though no results were sought, it is possible to try to rearrange the system of writing to the regime - it can take more than an hour, then the result is guaranteed.

In general, it is natural that the owners of desktop computing systems and laptops can use these methods to improve their productivity. For the renewal of the general staff, one can use the titles of overclocking (rozgin) components, and the introduction of adjustments through the transfer of capabilities. When choosing a method, it is important to think about it, but it is very necessary to correct it, and kindly to sort out the peculiarities of the opposite method.

"Dark green gorlet"

Seemingly, one of the most common warehouse day-to-day calculating systems, which is used for the classic spindle system. Today's SSD analogs have appeared, and the stink has not left a massive extension through the back of the head.

Tomo zvicain_ HDD vstanovlyuyutsya practically on a leather computer. In the case of the bag, DDR3 memory can easily transfer 20,000 MB / s; the internal bus of the central processor can be processed ten times more than the tribute; and Winchester with the SATA-3 standard is less than in ideal minds to "run" up to reference 100 megabytes per second. It is not vipadkovo recommended for system files vikoristovuvati productive SSD-models. This is a simple design: the HDD itself is hopeful for the system, being itself a "dancing gorlet". And since you can easily make changes in the way of processing the commands of the disk pidsystem, pouring it into the music with the singing world, you can often feel about those modes that are more beautiful: AHCI or IDE.

standard

The interconnection of the disk with the other components of the numerical system is viewed through a special keruyuchiy controller. Tsei chіp serve as a free transfer of commands, re-transform. Until recently, we will unite the "movoyu", zrozumіlim controller, using the IDE protocol.

Vinik at the dawn of the computer industry and the development of modernization. With the appearance of high-speed SATA disks, a cardinal overhaul of the protocol is required. So, it is easy to cope with the growing flow of money (interface), I am fashionable among the NCQ teams and realizes the ability to connect to the annex "on the fly". Otzhe, so also AHCI? IDE, as a result of new possibilities. The axis is so simple, at first glance.

Possibilities and perspectives

So as the standard є back together (attach SATA according to the IDE protocol), then in the BIOS of any analogue, you should have a presence point that allows you to vibrate the required mode.

At bagatokh vipadkah, it’s more difficult to get the computer to work normally. The function of the choice of modes is the presence only in software secured quiet motherboards, which transfer the robot from SATA. Tse all modern systems. However, here you can assign a hybrid solution, which allows you to connect both classic IDE attachments (RATA, a wide range of pink), as well as SATA (compact connector). Otzhe, AHCI or IDE? Is it more beautiful? Just get simpler, go to the whole, a list of "bonuses" is brought up, I will remove the coristuvach, activate a bigger random mode:

1. According to the internal electronic lances "disk controller - pay controller", the reach is 1.5 Gb / s (gigabit) for the modification of SATA-1 to 6 in the third revision. Nagadaєmo, SCHO UDMA-6, in which I can work old winchester, transmission is less than 133 Mb / s.

2. Talking about those that are more beautiful - AHCI or IDE, you can not fail to add the NCQ technology. The essence of the game is that Winchester can "get involved" in the flow of teams, overdriving them to improve the efficiency of the robot.

3. Possibility of "hot" will be replaced by an annex, if all systems are not required to be connected.

4. Parallel to the beating all at once to all disks, without the vicious handwriting.

The axis is such a great list of possibilities. Not wonderful, what a food: "AHCI or IDE: what is more beautiful?" є, mabut, one of the most painful. Bagato vlasnikov computers, as it’s not marvelous, is still turning into a “charming button”.

Theory and practice

So after all, AHCI or IDE is more beautiful? From the list you can create new ones, but the old protocol is meaningfully programmed. However, it’s not like that. See the moment in more detail. So, efficiently, the speed of transmissions of tributes has grown dozens of times, the prote magnetic disks in winchesters, as they were wrapped in 7200 wraps (the most popular solution), so they are wrapped. Apparently, in the process of reading any revolutionary explosions, it was not seen. In any test of HDD, you can't beat 6 GB of transmission. Navigate 200 MBytes! vinyatok - solid storage... If in the system there is such an attachment, then you can not go to the source: "AHCI or IDE: what is more beautiful?" However, as they did it, they didn’t become massed through the help of some accumulations.

Even more often in the debates about those that are more beautiful - AHCI or IDE, as the main argument for the first to try to use the NCQ protocol. Dіysnі, with active execution of decіlkoh programs to the hard disk the function is given allowing you to re-energize the power supply in the most optimal way. However, in an average computer, before the disk, more than two or three programs are quickly turned up at once, so you can talk about the outside of everything, but you can hardly go in the middle of a hitch.

IDE or AHCI - is it more beautiful? Windows 7, when activating the shutdown mode, will enable / disable the SATA attachment “on the go”. Dosage by hand, especially in server systems, is not necessary. For the sake of "hot change" it is recommended not to use internal roses, but to insert on the SATA modification case.

I, nareshty, the protocol allows the decals to winchesters on the tires immediately, and not to clean them up. The very potential of the NCQ will rise in the given range. Not relevant for an average computer.

In the case of a student, I want the AHCI protocol, from the point of view of technology, more tsikaviy, prote from this included, the main mass of corystuvachiv does not deny anything, except for moral satisfaction. There are only two vignettes from the out-of-the-box rule: server system and SSD victorian.

nuance vikoristannya

If you want to switch modes in BIOS it is possible for a few seconds, then one important moment. Win polyagaє in the offensive: if the operational system of the bullet is installed, for example, from AHCI, then if it is transferred to the IDE, it can be done correctly. It’s not a rule, but most often it’s like that. In addition, before the installation of the distribution kit, it is necessary to check that the protocol of the disk subsystem is planned to be implemented.

AHCI driver packages have become integrated into the system without Vista. All the previous solutions from Microsoft do not appear to be prompted, so it is necessary either to pick up or to install them, or to prepare them with the driver before installing. The new standard is changed according to Windows 7. Changing SATA from IDE mode to AHCI can be done from BIOS (item Configure SATA). In even more rare cases, changes can be made before the reestra.

way of mixing

In order to consume it in BIOS, if the numeric system is turned on and you need to press the Delete button ( personal computers) Abo F2 (laptops). Regardless of the implementation, a necessary item can be changed in any kind of distribution. For example, for yogo activation you can know Shift Boot Mode in CSM replaces UEFI, so that it is Compatible (IDE) and AHCI. The shukany item can be rebuilt in the SATA Enhanced distribution. It is necessary to respectfully look over the entire list. Letting go of the ESC and wait for the saving of the changes.

pidbags

Decision about those, which are the protocol itself to give the rewagon, to lay down as a number of factors. First for everything, from the operational system. From the madness on the "zaliznom" pivn. It is very clear that it is connected to the support system. Chim won vishcha, tim is more beautiful than AHCI. If you have analyzed all the problems, then you can say that offense of the protocol is clear, if it is properly adjusted, it will not hit any ills. Protest the updated version. Tse, so bi moviti, having buried "on maybut", for example, to buy an SSD.

Establish and enable special AHCI mode for skin corystuvache, which can be bi-digitally expandable and instantly upgrade the functionality of your PC for robots with SATA type winchesters, as well as SSD.
Such a mode allows you to significantly speed up your PC for the development of polished performance, and to activate this mode, it is necessary for all the main actions to be activated.

1. AHCI - tse

A special interface for modern "winchesters" SATA, which can handle the speed of transmission of data from the author up to six gigabytes, and the robot can be used in two modes:
IDE and AHCI.

IDE- to preserve the confusion with the older people who were accumulating money, as they were released in the "zero" rock. AHCI- Nada koristuvachevі ability in the world of vikoristovuvati the entire SATA interface. For example, it is possible to connect or connect the disk to the "motherboard" right on the next hour of the robot, not to navigate to the PC, because the smallest possible drop of the disk heads, thus increasing its performance.

For the activation mode, it is important to speed up the robot with files, write and read information on the hard disk, which will significantly improve the productivity of the PC as a whole. Pririst to appear approximately 20-percent, ale tim not less, for those who are imperious to work twenty hundred percent to whistle.

If you are using SSD disks and the SATA form factor, then the option of including a high-tech solution is simple and flexible.

2. Changeover to the AHCI regime. Inclusions chi nі.

Before turning on the AHCI Mode, you should turn over to the fact that you don’t win. If you often use the "important" add-ons, your PC is equipped with a hard-working processor and a sufficient amount of memory, then you simply do not remember at any given moment the mode of your PC.

Changeover to AHCI mode:
1. We pass in the power of the "Computer";
2. Vidkrivaєmo annex dispatcher;
3. Known IDE ATA / ATAPI controllers;
4. If the name is є AHCI, then the mode is active. If there is no such mode, then it will need to be turned on.

Є Another way to reconfigure the AHCI explicitness is to rewire the PC, and to look at the parameter through the BIOS. Yak go to BIOS, you know me singing.
transferring to BIOS, UEFI- wonder in any mode of the SATA function;

3. Yak turn on AHCI mode

Function to switch to mode AHCI, Most often, visit through.
But, in that case, if you are on Windows 7, then if the system is locked up, you may have a pardon on your screen, as if it were incomprehensible with Winchester. A similar situation can be with smaller, larger operating systems, or with a smaller operating system. At the time of the pardon, the computer, you will be re-zapped, or restarted.

yaksho vibrati AHCI-mode before installing a new system - the situation is changing. This allows the software to adapt from disk without causing any problems as a result.

Call the foldability, if the system is already on the hard disk, but the system changes the SATA parameters on the IDE, or if the packs are turned on NCQ- protocol SATA It is important to speed up the robot from the information, for the rakhunok polishnogo optimization of teams. For such a type, it is necessary to interact with the editors of the registry. If it’s not so and didn’t care about the result, then the AHCI mode can be installed, only if the system is reinstalled.

AHCI for Windows 7
Windows 7 is also required, most often, changing the mode to AHCI. Check it out, try it next:
1. Go to the editor of the registry. Fight through the Viconati menu by typing in the command: regedit.

2. It is known and passed to the section HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ services \ msahci;
3. Stamped on "Start", zmіnyuchi at the standard value 3 to 0.

4. Minyaumo in the center of the house at the point msahci on lastorV, and shukaimo Start parameter;
5. " 3 "Minyaumo on" 0 »;
6. Zakinchuєmo robot with the editor.

Restarting the computer and turning on the required mode through BIOS... after loading Windows 7 On the PC, the driver for the disks connected to the motherboard is automatically installed. If you install drivers and make changes, you will need to restart your PC. The conclusion of the stage in the editing mode is the reconversion of the recording mode "keshuvannya". Fight at the power of the disk. yaksho keshuvannya not active - you need to run it.

Microsoft Fix it- a supplementary version of the addition of pardons for the installation of a new regime. In addition, as a buv vikonany launch and enable a new mode. If you select a selection of necessary actions and all problems, the software will automatically fix all the changes, and there will be no pardon.

AHCI for Windows 8 and 8.1
At the same time, if you have a "visimka" on your PC, turn on the AHCI mode, you need to switch to the non-oven mode. And in the case of pardons, is it necessary?
1. The BIOS has an IDE mode;
2. Start up the PC;
3. Go to the start of the command row;
4. Enter the offensive command: bcdedit / set (current) safeboot minimal;

5. Pidtverdzhuєmo diyu;
6. Reboot the PC and go back to BIOS;
7. Activuvati is necessary AHCI mode;
8. I know to run the command row;
9. Introduce bcdedit / deletevalue (current) safeboot;
10. Repeat the reboot of the system, for which Windows sees the pardon.

If the system is based on Intel processors, then AHCI can be included in addition to additional utilities from the virobnik itself. AMD has no way of doing it.

If you want to be victorious, you need to start:
1. From the official internet site add a file f6flpy;
2. Download immediately SetupRST.exe
3. Go to the attachment manager and install the special driver f6 AHCI from the Winchester authorities, replace the specified SATA;
4. Start the new PC, go to the BIOS and turn on AHCI;

AHCI for Windows 10
To correct the settings, or to switch the mode, you can also quickly use the same program for Intel processors, Zrobiti price can be yak for help reinstalling windows, So and through the non-oven mode. Alle the most beautiful version of the editor will be the same as the editor itself, as a standard method, like the default values ​​in Windows 7.

You will need:
1. Log in to the system yak "Administrator";
2. Start the editor affordable way(For example, with the help of the utility "Viconati", having entered regedit in it;
3. Go to the special section HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ iaStorV, You will need to know "Start", and change the value of the parameter to " 0 »;

4. Know in іnshom pіdrozdіlі Services \ iaStorAV \ StartOverride the parameter is named 0, and set for the new value "0";
5. Now vibiraєmo Services \ storahci, Carry out the reset of the "Start" parameter;
6. On the offensive side Services \ storahci \ StartOverride, By setting the parameter value to "0";
7. Shut down the editor and restore the computer's reboot;
8. Go to BIOS, and also enable the required mode AHCI.

Porada: The fastest way to start Windows 10 Visonati in bakeless mode, and to turn on the Viconati menu behind the help by typing the msconfig command into it, in order to display all system adjustments on the screen. Vibrate the tab "Security" and put a tick on the "safe mode", vibrate the option "Minimalna".

Yakshcho you have replaced Biosil UEFI- it is necessary to enter the problem through the system menu.
1. Enter the menu (Win + l);
2. It is included in the "update that bezpeka";
3. It is included in the "renewal", and if it is switched to special options for renewal;
4. Go to the special menu, go to the tab "Additional parameters", and go to the section " set up UEFI».

You can go to the BIOS setup, you can press the key to go to the BIOS - you can use the F2, F12 or other buttons.

4.Inshi features of the AHCI

For Windows XP, you can install AHCI every day. For hours of development, the options were not transferred and not planned. If you want to be able to do something, then know a special driver and put him in the system. Alle, I do not recommend any kind of robotics, such a possibility can be shitty about the robot of the system.

Winodws vista by including in itself an identical mode of inclusion AHCI, Yak i in Windows 7, so for additional utilities or restructuring.

5. Pid bags

Most of the time, when the screen is issued according to the setting mode AHCI, The system will be very stable, plus it will be accelerated. If nothing happened, then it is possible to reinstall the system, for that, as the change to the regime has become - it can take a lot of an hour, but then the result, often for everything, guarantees.

The power supply for the AHCI mode on the IDE is set to correct, which requires a disk inversion programmatically or vstanovit Windows XP on an apparently new computer or laptop. If you switch the modes in the folklore, you just can't beat the distribution kit.

How do I view AHCI mode from IDE?

IDE - 40-pin rose for connection hard disk(And not only) to the motherboard. Such roses cannot be victorious at the current annexes. Otzhe, IDE can be installed on old add-ons. You need some wine only in extreme cases, for example, for Windows installations XP or Vista. The speed of transmission of tribute through such a rose becomes 1000 Mb / sec.

Writing IDE on motherboards and hard drives comes with a new SATA rose. I will overturn my successor with a good speed of robots. AHCI mode is displayed for the robot. The transmission rate of data in such a warehouse mode is from 1500 to 6000 Mb / s (it’s a matter of fact that SATA is used for I, II or III).

As soon as you have SATA roses on your attachment, it is more beautiful than victorious, so as IDE mode will reduce the productivity of Winchester. You can switch to new, if your PC does not have a driver for SATA, or in case of problems, as you require it.

How can I switch from AHCI to IDE?

Regardless of the model of the motherboard and the version of the BIOS firmware, there will be a change after switching modes.

• I will lock it into the BIOS. As long as your PC is old, then go to the "Main" mode and vibrate "Sata Mode" or "Configure SATA as". There are two options for choosing: "IDE Mode" і "AHCI Mode"

• If the firmware of your BIOS is in, you need to know the "Security" section and remember the "Secure Boot" setting by selecting "Disabled".

• The installation can be found in the "Boot" box.

• Dali go to the "Advanced" tab and go to the item "System Configuration".

• See a new menu. Vibrating "SATA Controller Mode". Have new "AHCI" on "Compatibility" (in new IDE firmware).

Of course, it means that if you do not have a “SATA Controller Mode” section, you will need to switch “UEFI Boot” to “CSM Boot” in the same section.

It is important to note that motherboards and laptops virobniks have greatly reduced the functionality of BIOS, and it’s unwise to switch to IDE mode.

AHCI - the whole mode of complexity of modern hard drives and motherboards with pink SATA. For the additional help given to the regime, the computer is more efficiently obroblya dan. Name AHCI inclusions for changes in current PCs, or for OS reinstallation, or some problems can be turned on.

To turn on the AHCI-mode, you need to use not only BIOS, but the operating system itself, for example, for the introduction of special commands through "Command row"... If you have a lot of possibilities to lock the operating system, it is recommended to install clogging up a USB stickі for the help of the installer go to item "System update", It is necessary to know the item with the activation « command line» ... For wiklik, use a small instruction:

If you do not start і a flash drive with an installer, then it’s better for everything, they started to put the import priorities in the BIOS.

Enabling AHCI in Windows 10

It is recommended that you install the locking system in the « ovenless mode» for the help of special teams. You can try to destroy everything, do not change the view of the blocked operating system, but in all cases, you can try to get rid of your fear and risk. Varto also means that it is a good way to go for Windows 8 / 8.1.

To make the correct setting, you need:

To carry out the adjustment, you can start without prior to enabling the AHCI mode in the BIOS. Get victorious with the instructions:

Enabling AHCI in Windows 7

Here, the process of turning on will be more foldable, so as in the whole version of the operating system, it is necessary to make changes to the restructuring.

Hurry up with the given instructions:

Entering the ACHI mode is not so easy, if there is a lack of information on the PC, then it’s better for the robot to roam without the help of the computer, because it’s a risky thing that you can beat the settings in the restore and / or the BIOS, you can do it yourself problems with the computer.