Zharoznizhuvalny for children is recognized as a pediatrician. Allegedly, there are situations of inconspicuous help in case of danger, if the child is in need of giving innocently. Todi dad take on the versatility and constipation of fever-lowering drugs. How can you give children a breast? How can you beat the temperature of older children? What are the best ones?
Good afternoon. This statute has been assigned to the BIOS adjustment software, which allows the basic adjustment of the system. The settings are saved in the independent CMOS memory and are saved when the computer is turned on.
ENTRY TO THE PROGRAM OF ADJUSTMENT
To go to the program, adjust the BIOS, turn off the computer and just click on the keyboard ... To change additional BIOS parameters, click on the "Ctrl + F1" combination in the BIOS menu. A menu of additional BIOS parameters is displayed.
CORUVAL KEYS
<
?>
Move to the front menu item
<
?>
Crossing to the offensive point
<
?>
Go to item livoruch
<
?>
Go to the right-handed point
<+/PgUp>
Zbіlshiti numerical value adjusted or vibrate less value from the list
<-/PgDn>
Change the numerical value of the adjustment or vibrate the lower value from the list
DOVIDKOVA INFORMATION
Main menu
At the bottom of the screen, a description of the vibration setting is displayed.
Completed side of Nalashtuvan / Side of Nalashtuvan
When the F1 keys are pressed, there will be a short clue about the possible options for adjusting and attributing different keys. For zakrittya vіkna natisnіt
Main menu (on the applied BIOS version E2)
When entering the BIOS setup menu (Award BIOS CMOS Setup Utility), the head of the menu is displayed (Fig. 1), who can choose from eight sides to set up and two options to enter from the menu. For the additional buttons with arrows, select the required item. To enter to the submenu press
Fig. 1: Main menu
I don’t let you know needs to be adjusted, press Ctrl + F1 and joke її in the advanced BIOS setup menu.
Standard CMOS Features
All standard BIOS adjustments can be found on this side.
Advanced BIOS Features
The additional parameters of the Award BIOS can be found on the side.
Integrated Peripherals
All peripheral annexes have been set up on the whole side.
Power Management Setup
At the end of the day, we need to adjust the energy saving regimes.
PnP / PCI Configurations
At the end of the day, build resources for outbuildings
PCI and PnP ISA PC Health Status
At the same time, the temperature is displayed as well as the frequency and frequency of the fan.
Frequency / Voltage Control
At the same time, you can change the clock frequency and the multiplier processor frequency.
To achieve maximum productivity, set the Top Performance item to the Enabled value.
Load Fail-Safe Defaults
Safe adjustment for the promoters will guarantee the quality of the system.
Load Optimized Defaults
Optimization of the adjustment for industrialization to provide the optimal working characteristics of the system.
Set Supervisor password
You can enter, change or learn the password at the end of the page. This option allows you to intercept access to the system and adjust the BIOS, or rather to the BIOS.
Set User password
On the central side, you can set up, change or take a password, which will allow you to block access to the system.
Save & Exit Setup
Save the adjustment of CMOS and output from programs.
Exit Without Saving
Reflection of all changes and outputs from programs adjusted.
Standard CMOS Features
Fig. 2: Standard BIOS setup
Date
Date format:<день недели>, <месяц>, <число>, <год>.
Timing day - the day the BIOS starts up for the entered date; It cannot be changed without the need for it.
Місяц is the name of the month, from the present to the breast.
Date - day of month, from 1 to 31 (or the maximum number of days per month).
Rik - rik, from 1999 to 2098.
Time
Format for hour:<часы> <минуты> <секунды>... The hour is entered in the 24-year format, for example, 1 year of the day, the yak is recorded at 13:00:00.
IDE Primary Master, Slave / IDE Secondary Master, Slave
At the same time, there are parameters of disk drives installed on computers (from Z to F). There are two options for setting parameters: automatically, I will manually. When assigned, the parameters of the accumulator will be assigned to the keystroke, and the automatic mode will be set by the system. Mayte on uvaz, the introduced information is guilty of the type of disc.
If you say the wrong type, the disc is not normal. If you vibrate User Ture, you will need to remember the points below. Enter data from keyboard and keyboard
CYLS - Number of cylinders
HEADS - Number of heads
PRECOMP - Before compensation for an hour to record
LANDZONE - Head parking area
SECTORS - Number of sectors
Yaksho one iz hard drives not installed, vibrate NONE and press
Drive A / Drive B (floppy drive)
At the same time, the type of floppy drives A and B installed on computers are asked. -
None - Floppy drive not installed
360K, 5.25 in. Standard 5.25-inch PC floppy drive 360 KB
1.2М, 5.25 in. 5.25-inch AT-type floppy drive with a high-capacity recording capacity of 1.2 MB
(3.5-inch floppy drive, enabled for mode 3).
720K, 3.5 in. 3.5-inch floppy drive with double-sided recording; мніст 720 Kbytes
1.44M, 3.5 in. 3.5-inch floppy drive with double-sided recording; Amount 1.44 MB
2.88M, 3.5 in. 3.5-inch floppy drive with double-sided recording; The unit is 2.88 MB.
Floppy 3 Mode Support (for Japan Area)
Disabled A superb floppy drive. (Nalashtuvannya for zamovchuvannyam)
Drive A Floppy drive A will accept mode 3.
Drive Floppy drive In standby mode 3.
Both Floppy Drive A and Enable Mode 3.
Halt on
Dane nalashtuvannya viznachaє, with the appearance of any pardons, the system will be closed.
NO Errors The security of the system will be continued, invariably at any time. As a matter of fact, pardons are displayed on the screen.
All Errors Entanglement will be interrupted if the BIOS will be grateful.
All, But Keyboard The entrapment will be interrupted for some kind of pardon, for the blame of zboyatury. (Nalashtuvannya for zamovchuvannyam)
Ail, But Diskette Zavantazhennya will be interrupted for some kind of pardon, for the blame of a floppy drive.
All, But Disk / Key Zavanazhennya will be interrupted for some kind of pardon, for a vignette of the keyboard or disk.
Memory
At a number of points, there is a memory change, so that the BIOS starts up every hour of self-testing of the system. It is not possible to change the price value by hand.
Base Memory
With automatic self-testing of the BIOS, the system starts up the basic (or special) memory installed in the system.
As soon as the system board has a 512 Kbyte memory, the screen displays 512 K, while the system board has a 640 Kbyte memory, or more, 640 K.
Extended Memory
With an automatic self-test BIOS, the size of the expanded memory installed in the system is determined. Expanded memory - the whole operative memory with addresses is 1 Mbyte in the addressing system of the central processor.
Advanced BIOS Features
Figure 3: Updating BIOS settings
First / Second / Third Boot Device
(First / other / third zavantazhvalny pristіy)
Floppy Floppy disk lock.
LS120 Locking from the LS120 drive.
HDD-0-3 Zavanazhennya z hard disk from 0 to 3
SCSI Entry from SCSI attachment. Locking from the ZIP drive.
USB-FDD Locked floppy drive with USB interface.
USB-ZIP Encryption from a ZIP attachment with a USB interface.
USB-CDROM Encapsulated from CD-ROM with USB-interface.
USB-HDD Hard disk encapsulation with USB interface.
LAN Zavanazhennya through a local net.
Boot Up Floppy Seek
In the process of self-testing of the system and BIOS, the type of floppy drive is 40-way or 80-way. The disk drive is 360 Kb є 40-way, and the 720 Kb 1.2 Mbyte and 1.44 Mbyte drives are 80-way.
Enabled BIOS, the type of the drive is 40 or 80-way. Mayte on uvaz, but the BIOS does not distribute 720 Kbyte, 1.2 Mbyte and 1.44 Mbyte drives, and the odds of all the stinks are 80-bit.
Disabled BIOS is not a drive type. For an hour the installation of a 360 Kbyte drive cannot be displayed on the screen. (Nalashtuvannya for zamovchuvannyam)
Password Check
System If the system is powered up and you do not enter the correct password, the computer will not get locked up and access to the settings will be closed.
Setup If you do not enter the correct password when the system is powered up, the computer will lock up, protest access to the settings will be closed. (Nalashtuvannya for zamovchuvannyam)
CPU Hyper-Threading
Disabled Hyper Threading Mode enabled.
Enabled Hyper Threading Mode is not enabled. Respect, that the function is realized if it doesn’t matter if the operating system will process the configuration. (Nalashtuvannya for zamovchuvannyam)
DRAM Data Integrity Mode
The option of allowing operational memory how to vikoristovutsya memory of the type of ECC.
ECC ECC mode is enabled.
Non-ECC The SCC mode is not victorious. (Nalashtuvannya for zamovchuvannyam)
Init Display First
AGP Activate the first AGP video adapter. (Nalashtuvannya for zamovchuvannyam)
PCI Activate the first PCI video adapter.
Integrated Peripherals
Fig. 4: Peripheral annexes are awakened
On-Chip Primary PCI IDE
Enabled Enabling IDE channel 1 controller. (Nalashtuvannya for zamovchuvannyam)
Disabled Vbudovaniya controller 1 channel IDE is enabled.
On-Chip Secondary PCI IDE
Enabled Enabling IDE channel 2 controller. (Nalashtuvannya for zamovchuvannyam)
Disabled Vbudovaniya controller 2 IDE channel is set.
IDE1 Conductor Cable (Type of cable connected to IDE1)
ATA66 / 100 Up to IDE1 a loop of the ATA66 / 100 type is connected. (Change, so your attach IDE and loop accept ATA66 / 100 mode.)
ATAZZ Up to IDE1 a loop of ATAZZ type is connected. (Cross over, attach IDE and loop to accept ATAZZ mode.)
IDE2 Conductor Cable (Type of cable connected to ШЕ2)
Auto Automatically set up BIOS. (Nalashtuvannya for zamovchuvannyam)
ATA66 / 100/133 Up to IDE2 a loop of the ATA66 / 100 type is connected. (Change, so your attach IDE and loop accept ATA66 / 100 mode.)
ATAZZ Up to IDE2 a loop of ATAZZ type is connected. (Cross over, attach IDE and loop to accept ATAZZ mode.)
USB Controller
If you don’t choose to install the USB controller, select the option.
Enabled USB controller is enabled. (Nalashtuvannya for zamovchuvannyam)
Disabled USB controller enabled.
USB Keyboard Support
When the USB keyboard is connected, set the value to “Enabled”.
Enabled The USB keyboard is enabled.
Disabled Disabled USB keyboard input. (Nalashtuvannya for zamovchuvannyam)
USB Mouse Support
When USB is connected, set the value to “Enabled” at the same item.
Enabled The USB interface is enabled.
Disabled Disabled USB display. (Nalashtuvannya for zamovchuvannyam)
АС97 Audio (АС'97 audio controller)
Auto Vbudovaniya audiocontroller АС'97 is displayed. (Nalashtuvannya for zamovchuvannyam)
Disabled Vbudovaniya audiocontroller AC'97 is enabled.
Onboard H / W LAN
Enable Insertion of the fenestration controller is enabled. (Nalashtuvannya for zamovchuvannyam)
Disable Vmkneno vimkneno fencing controller.
Onboard LAN Boot ROM
Vikoristannya PZP vbudovanogo stitching controller for blocking the system.
Enable Disabled by function.
Disable Function enabled. (Nalashtuvannya for zamovchuvannyam)
Onboard Serial Port 1
Auto BIOS will set the address to port 1 automatically.
3F8 / IRQ4 Enable the last port 1 by giving it the address 3F8.
2F8 / IRQ3 Turn on the last port 1 given to this address 2F8.
3E8 / IRQ4 Enable the last port 1 given to this address ZE8.
2E8 / IRQ3 Turn on the last port 1 given to this address 2E8.
Disabled Disabled Insertion port 1.
Onboard Serial Port 2
Auto BIOS will set the address to port 2 automatically.
3F8 / IRQ4 Turn on the last port 2 given to this address 3F8.
2F8 / IRQ3 Turn on the last port 2 given to this address 2F8. (Nalashtuvannya for zamovchuvannyam)
3E8 / IRQ4 Enable the last port 2 given to this address ZE8.
2E8 / IRQ3 Enable the last port 2 given to this address 2E8.
Disabled Vimknuti on port 2.
Onboard Parallel port
378 / IRQ7 Turn on the LPT port by sending address 378 and assigning IRQ7. (Nalashtuvannya for zamovchuvannyam)
278 / IRQ5 Turn on the LPT port by giving this address 278 and assigning the redirection of IRQ5.
Disabled Vimknuti in the LPT port.
3BC / IRQ7 Turn on the LPT port by giving this address of the storage device and indicating that IRQ7 has been rewritten.
Parallel Port Mode
SPP Parallel port for servo mode. (Nalashtuvannya for zamovchuvannyam)
EPP Parallel port working in Enhanced Parallel Port mode.
ECP Parallel port working in Extended Capabilities Port mode.
ЕР + ЕРР Parallel port of operation in ECP and ЕРР modes.
SCP Mode Use DMA
3 Mode ЄСР vikorist channel DMA 3.
1 CPV mode DMA channel 1.
Game Port Address
201 Set the address of the game port 201.
209 Set the address of the game port to door 209.
Disabled Disable the function.
Midi Port Address
290 Set the address to MIDI port 290.
300 Set the address to MIDI port 300.
330 Set the address to MIDI port 330.
Disabled Disable the function.
Midi Port IRQ (Redirected to MIDI port)
5 Assign IRQ 5 to the MIDI port.
10 Assign IRQ 10 to the MIDI port.
Power Management Setup
Fig. 5: Nalashtuvannya keruvannya living
ACPI Suspend Type (Type to ACPI mode)
S1 (POS) Set S1 checkout mode. (Nalashtuvannya for zamovchuvannyam)
S3 (STR) Set S3 cleanup mode.
Power LED in SI state
Blinking Blinking mode (S1) is the blinking indicator. (Nalashtuvannya for zamovchuvannyam)
Dual / OFF In the mode (S1):
a. As soon as the one-color indicator turns off, the S1 mode turns off.
b. As a result, a double-line indicator is displayed, the change in color is displayed in the S1 mode.
Soft-offby PWR BTTN
Instant-off When the buttons are pressed, the computer is displayed immediately. (Nalashtuvannya for zamovchuvannyam)
Delay 4 Sec. Schob vimknuti the computer, then press the live button for 4 seconds. When the button is pressed for a short time, the system switches to the ochikuvannya mode.
PME Event Wake Up
Disabled The wake-up function for the PME is enabled.
ModemRingOn
Disabled The function of awakening the signal to the modem / local wake-up call.
Enabled Disabled by function. (Nalashtuvannya for zamovchuvannyam)
Resume by Alarm
With Resume by Alarm, you can set the date that hour the computer was turned on.
Enabled Enhanced by the computer enable function.
As the function has been shown, the following meanings should be included:
Date (of Month) Alarm: Month Day, 1-31
Hour (hh: mm: ss) Alarm: Hour (hh: mm: cc): (0-23): (0-59): (0-59)
Power On By Mouse
Disabled Disabled function. (Nalashtuvannya for zamovchuvannyam)
Double Click Awakening the computer with a subdued onslaught of mischief.
Power On By Keyboard
Password To turn on your computer, you need to enter the password from 1 to 5 characters.
Disabled Disabled function. (Nalashtuvannya for zamovchuvannyam)
Keyboard 98 When the keyboard is on є the button is turned on, the computer shrinks when pressed.
KV Power ON Password
Enter Enter the password (from 1 to 5 alphanumeric characters) and enter Enter.
AC Back Function
Memory When the computer is renewed, the computer turns to the camp, in which case it has changed in front of the renewed life.
Soft-off (Nalashtuvannya for zamovchuvannyam)
Full-On When the computer is updated, it will appear.
PnP / PCI Configurations
Fig. 6: Setting up PnP / PCI attachments
PCI l / PCI5 IRQ Assignment
Auto Automatic transfer for PCI 1/5 attachments. (Nalashtuvannya for zamovchuvannyam)
3, 4, 5, 7, 9, 10, 11, 12, 15 Designated for PCI attachments 1/5 re-assign IRQ 3, 4, 5, 7, 9, 10, 11, 12, 15.
PCI2 IRQ Assignment
Auto Automatically transfer for PCI 2 attachments.
3, 4, 5, 7, 9, 10, 11, 12, 15 Designated for PCI 2 attachment to re-assign IRQs 3, 4, 5, 7, 9, 10, 11, 12, 15.
ROS IRQ Assignment
Auto Automatic transfer for PCI 3 attachments.
3, 4, 5, 7, 9, 10, 11, 12, 15 Designated for PCI add-in 3 to re-assign IRQ 3, 4, 5, 7, 9, 10, 11, 12, 15.
PCI 4 IRQ Assignment
Auto Automatic transfer for PCI 4 add-ons.
3,4,5,7,9,10,11,12,15
PC Health Status
Fig. 7: Computer monitoring
Reset Case Open Status
Case Opened
As the case of the computer is not crooked, the Case Opened item displays No (Ні). When the case is open-faced, the Case Opened item displays Yes.
To remove the display of the sensor, set the “Reset Case Open Status” to “Enabled” and go from the BIOS to save it. The computer will rewire.
Current Voltage (V) Vcore / VCC18 / +3.3 V / + 5V / + 12V
At a number of points, the main factors in the system are automatically displayed.
Current CPU Temperature
At the same point, the temperature of the processor is displayed.
Current CPU / SYSTEM FAN Speed (RPM)
At the same point, the frequency of wrapping the fans in the processor and case is displayed.
CPU Warning Temperature
Disabled The processor temperature is not monitored. (Nalashtuvannya for zamovchuvannyam)
60 ° C / 140 ° F An overdrive is seen at an overshoot of 60 ° C.
70 ° C / 158 ° F An overdrive is seen at an overshoot of 70 ° C.
80 ° C / 176 ° F An overdrive is seen at an overshoot of 80 ° C.
90 ° C / 194 ° F An overdrive is seen at an overshoot of 90 ° C.
CPU FAN Fail Warning
Disabled Disabled function. (Nalashtuvannya for zamovchuvannyam)
SYSTEM FAN Fail Warning
Disabled Disabled function. (Nalashtuvannya for zamovchuvannyam)
Enabled When the fan is zipped, the fan will be overdriven.
Frequency / Voltage Control
Fig. 8: Frequency / spacing adjustment
CPU Clock Ratio
There is also a multi processor frequency fixed, and there is an option in the daily menu. - 10X-24X The value is set to fall from clock frequency processor.
CPU Host Clock Control (Keruvannya base frequency of the processor)
Note: If the system hangs until it is locked by BIOS programs, check it for 20 seconds. For the system to re-enroll. When rebooted, the processor's base frequency will be set, so you can set for promos.
Disabled Disable the function. (Nalashtuvannya for zamovchuvannyam)
Enabled Increase the kerovane function by the base frequency of the processor.
CPU Host Frequency
100MHz - 355MHz Set the base frequency of the processor between 100 and 355 MHz.
PCI / AGP Fixed
To regulate AGP / PCI clock frequencies, select 33/66, 38/76, 43/86 or Disabled.
Host / DRAM Clock Ratio
Uwaga! If the price is wrong, the computer can't get started. At the end of the day, you can remove the BIOS settings.
2.0 Memory frequency = Base frequency X 2.0.
2.66 Memory frequency = Base frequency X 2.66.
Auto The frequency is set according to the SPD data of the memory module. (The value for the replacement)
Memory Frequency (Mhz)
This value is based on the base frequency of the processor.
PCI / AGP Frequency (Mhz)
Frequencies vstanovlyuyuyutsya fallen from the value of the option CPU Host Frequency or PCI / AGP Divider.
CPU Voltage Control
The stress of the processor's life can be adjusted by an amount of 5% to 10%. (Values for substitutions: nominal)
DIMM OverVoltage Control
Normal The stress of living the memory of the nominal one. (The value for the replacement)
+ 0.1V The voltage supply voltage is increased by 0.1 V.
+ 0.2V Memory voltage increase by 0.2 V.
+ 0.3V The voltage supply voltage is increased by 0.3 V.
Only for predvіdchennykh koristuvachіv! Incorrect installation can lead to a breakdown of the computer!
AGP OverVoltage Control
Normal Normal video adapter life to nominal. (The value for the replacement)
+ 0.1V The voltage of the video adapter is adjusted by 0.1 st.
+ 0.2V The voltage of the video adapter is shifted by 0.2 st.
+ 0.3V The voltage of the video adapter is shifted by 0.3 st.
Leave it for the happy ones! Incorrect installation can lead to a breakdown of the computer!
Top Performance
Figure 9: Maximum productivity
Top Performance
To achieve the highest productivity of the system, add the value "Enabled" to the item "Top Performance".
Disabled Disabled function. (Nalashtuvannya for zamovchuvannyam)
Enabled Maximum productivity mode.
Increasing the mode of maximum productivity, increasing the speed of robotics and hardware components. On the robot of the system, in the whole mode, they pour in both the hardware and the software configuration. For example, the hardware configuration itself can be good for Windows NT, but not for Windows XP. Therefore, there are problems with the reliability and stability of the robotic system, it is recommended to enable the option.
Load Fail-Safe Defaults
Fig. 10: Installation of non-fired installations for substitution
Load Fail-Safe Defaults
Safe adjustment for promos - the value of the parameters of the system, the most safe from the point of view of the quality of the system, but also to ensure the minimum speed.
Load Optimized Defaults
When choosing a menu item, the standard setting of the BIOS parameters is set to a set of microcircuits, which are automatically set up by the system.
Set Supervisor / User Password
Fig. 12: Password setting
As soon as you vibrate the menu item, you will be asked to enter the password at the center of the screen.
Enter your password if you have no more than 8 characters or more
Schob skasuvati password, type in a new password when asked to enter a new password.
The BIOS setup menu allows you to set two different passwords: administrator password (SUPERVISOR PASSWORD) and keystore password (USER PASSWORD). If passwords are not specified, be it a key user, you can restore access to BIOS parameters. Once a password has been set for access to all BIOS parameters, it is necessary to enter the administrator password, and for access to the main parameters - the password of the administrator.
As soon as in the menu of additional BIOS adjustments at the “Password Check” item, you will set the “System” parameter, the system will power up the password when the computer is skinned, or when entering the BIOS adjustment menu.
If in the menu of additional BIOS adjustments at the “Password Check” item and “Setup”, the system will power up the password if you try to go to the BIOS adjustment menu.
Save & Exit Setup
Fig. 13: Saving nalashtuvan and vyhid
Schob save the changes and go out from the menu nalashtuvan, natisnit "Y". Schob turn to the menu nalashtuvan, natisnit "N".
Exit Without Saving
Fig. 14: Going without saving changes
Schob go from the menu to adjust BIOS without saving changes, typing "Y". Schob turn to the menu adjust BIOS, press "N".
4. Adjust BIOS in pictures
(WinFast motherboard. BIOS version Phoenix Technologies, LTD 6.00 PG)
"Oholosit the entire list, be weasel!"
Qiu vіdomu the phrase promulgating the character of the kohan people of the comedy Gaidai. And in general context it is easy to understand, which means the main groups are set up, which show the dots, which are shown during the cob input before BIOS Setup (Fig. 1):
It's pretty much the same. How can you find a skin item on the main menu?
- Standard CMOS Features- at a number of points about the options, which are considered for the establishment of the system date that hour, setting up disk accumulations, about the POST pardons.
- Tiger Central Control Unit- There is an adjustment here, which is based on the level of the electromagnetical vipromagnetism of the computer, the functionality of the new signalizers, the adjustment of the robot and the operational memory of the processor. Here you can regulate, so you can get the options for the boom.
- Advanced BIOS Features- at a number of points there are functions, which are responsible for adjusting the processor, caching memory, the order of operation of the attachments after the hour of the computer, the parameters of the keyboard robot.
- Advanced Chipset Features- Tsi optsії are responsible for adjusting the motherboard chipset, and for setting up the parameters of the robot with the operative memory.
- Integrated peripherals- Place options integrated into the motherboard of the add-ons: audio, video, development controllers, etc.
- Power Management Setup- at a number of points, there are options, which set the computer's power mode, as well as options, which can be used if it is necessary to use the computer or to use it.
- PnP / PCI Configurations- The whole point includes options, which show you for the distribution of system resources between the add-ons of the computer.
- PC Health Status- At the end of the selection of the options, which is considered for the monitoring of the robot's computer: the temperature and the speed of the fan's wrapping. The regulation of large opts is protected by a virobnik.
- Load Fail-Safe Defaults- Okrema opt. Yaksho її vibrate, you can update the standard factory BIOS setup... You might be familiar with the vipad, if your DOSVIDI from BIOS made the computer unstable, but you don’t know if I’ll hand over a pardon.
- Load Optimized Defaults. By vibrating the point, you can comprehensively set a number of options for securing the highest productivity.
- Set Supervisor Password- The whole point is used to set the password for the supervisor, only after entering what you can see and edit the BIOS.
- Set User Password- the whole point is analogous to the foreground, ale of the meaning for the password setting of the koristuvach. For a simple password, you can restore access to BIOS, but you will not be able to redaguvate the option.
- Save & Exit Setup- saving changes and outputs from BIOS Setup programs.
- Exit Without Saving- exit from BIOS Setup without saving changes.
Pochinaєmo nalashtuvannya
How to go to the BIOS parameters is written in the file. Proceed to mossy nalashtuvan.
For the additional keys of the keyboard "up-down", "left-right" vibrate and open the tab Standard CMOS Features (Fig. 1). Onslaughtєmo Enter:
From the available adjustment here you can change the date and hour, parameters of hard drives and storage drives. On little 2 you can see that there are two hard drives in the system block. Use the arrow keys to move and press the Enter key, then you need to vibrate the option, Esc, and then turn back.
IDE Channel 0 Master. Here, the characteristics will appear, either the type of storage device (for example, a hard disk) connected to the main one, to the primary (or only one) IDE channel of the standard IDE / SATA controller of the motherboard chipset (or for older computers, it is just an IDE controller to the chipset). As a rule, the optimal option will be set to auto.
IDE Channel 0 Slave. Here, the characteristics will appear, either the type of storage device (for example, a hard disk), connected to the primary (or only one) IDE channel of the standard IDE / SATA controller of the motherboard chipset (for old computers, it is just an IDE chipset controller). As a rule, the optimal option will be set to auto.
Fig. 2 (denoted by a green rectangle) depicts the zagalny obsyag of the memory of the system.
Deyaki dzherela recommend to vibrate the drive, having moved the cursor, press Enter, then write down the values of the parameters of the Cylindri, the Head, the Sector and the LBA, change the type of accumulator from AUTO to USER and again enter the same data. Also, LBA Mode, Block Mode and 32-bit Transfer Mode are available.
Go to the Tiger Central Control Unit tab in order (Fig. 4.5):
Smart Power LED. Tse of opts_ya functionality of svitlodiod, which signals about the inclusion of life. When set to Enabled (enabled), the signal to frequent flashes will signal the processor fan plugging, more short flashes (with a period of about 2 seconds) - about problems with the monitor or the video card, two of them have failed, but in some cases memory of three sleeps, how to go to sleep - about pardons for an hour of self-test POST. Disabled value - vikoristovuvatisya standard mode of robotic svitlodiod.
Smart Boot Menu. When the Enabled value is set, the pre-set menu appears after the hour is locked, which allows you to vibrate the locked disk just as specified in the BIOS Setup settings. Once Disabled has been installed, there will be an extraordinary order of entanglement.
Auto Detect PCI Clk. Allows you to change the level of an electromagnetic viprominuvannya computer. When the function is turned on, the signals to the PCI bus slots stop being sent, but do not be vicious. Here you can vibrate for a hearing. The change is insignificant, so you can vibrate і Disabled (vimkneno).
Memory settings are located in the DRAM Configuration section. When three options come, go to the options in Fig. 5 and go to the open tab of the DRAM Configuration option (Fig. 6). There were fine adjustments. Tisnemo Enter.
Yak storage device, DRAM memory є a module of new constructions, which can be stored from an electrical board, on a memory chip and a rose, which is necessary for connecting the module to the motherboard.
As soon as you name the option to stand a cross, then the regulation is protected by a virobnik!
Timing Mode. The process of setting the parameters of the robotic operative memory. When choosing the Auto information value, it is taken from the SPD microcircuit of the memory module. If you vibrate Manual, then the ability to customize all the characteristics of the memory will appear by hand with the method of rejecting the maximum speed. As soon as you manually adjust the memory, problems have come to light (the computer has become unstable, it’s pardon for the hour of the robot program), turn to the automatic configuration. Automatic adjustment is recommended for the installation of new operating system programs.
Memory Clock value or Limit (Fig. 6). Parameter, the long-range vibration of the frequency of the robot memory. Є Allowable values - 400, 533, 667, 800. You can also use Auto option (optionally, By SPD), allowing you to read information about the robot module from the SPD microcircuit.
DQS Training Control. The values are Perform DQS, Skip DQS. A special strobe signal can be transmitted via the memory bus, which speaks about the readiness of the tribute. Wien allows you to compensate for a change in temperature and drift in life. It is possible to recommend that you choose the Perform DQS value, and if you select Skip DQS in some drops, you can get confused by the problem of an unstable computer robot.
CKE base power down mode. The start of the transition from the operational memory to the energy-saving mode. If the option is active (the value is Enabled), then at the end of the day open sides memory before the transition of the processor to the energy-saving mode, the modules will be switched on by a low level input to the CKE. Yaksho vrahuvati, which is switched from the energy saving mode to the pre-clock cycle of cleaning from the side of the processor, can be set for the Disabled option.
CKE is based on PowerDown. Possible values: Per Channel, Per CS. It is possible to connect to the power saving mode: one by one channels (Per Channel) or some microcircuits (Per CS). The first option for the change.
Memory Hole Remapping. If the zagalny obsyag of operative memory in the system is 4 or more GB, the inclusion of the option (Enabled) to transfer the blocks of the address, vikorisovuvani by expansion cards, the address space for 4 GB. This allows you to increase the amount of available operating systems and memory (the operating system can be used less than 3-3.5 GB). In order to be able to support such a task, it is necessary to install 64-bit processors and 64-bit versions of operating systems (or server versions of 32-bit operating systems, which allow extended physical addresses - PAE). With a lesser amount of operational memory, it will be necessary to open the option (Disabled), and there may be problems in the robotic extension cards, video cards (for example, hanging due to a decrease in productivity trivial games). Also, if you have installed a 32-bit operation Windows system XP, it’s a very powerful defect, if there is 3-3.5 GB of operating system, the system will report all about 2 GB of operating memory.
Auto Optimize Bottom IO. When the options are enabled (Enabled), the resources for the extension cards are displayed so that the maximum amount of operational memory is available. If, in some cases, there is a conflict between extension cards, then the option should be transferred to the Disabled position.
Bottom of IO space. The option will clarify the expansion of the addressable space of the cards. You can overwrite the value for the items (D0), only the addresses of the cards extended for the viewer D0xxxxxx). You are trying to optimize the sense only if you have installed 4 or more GB of operational memory and you are using a 32-bit operating system. Today, you can try to step-by-step with the option to transfer the ear of the address space for the expansion of the map, as soon as there are conflicts. Tse to increase the availability of the operational memory of the OS.
DDRII Timing Item. There is an option for the manual setting of all parameters of the robot's operational memory. When selecting the Enabled value, the information is taken from the SPD microcircuit of the memory module. As soon as we can automatically configure it, the vibration is Disabled, we can adjust all the characteristics of the memory, reaching the maximum speed. As soon as manually configuring the memory, the problems have come to a head (the computer seems to be unstable, the pauses appear before the hour of the robot's program), turn to the automatic configuring. It is also recommended to use automatic configuration for the installation of new programs, especially for the installation of an operating system.
TwTr Command Delay. Possible meanings: to lie down according to the type of memory, you can also use the option Auto. The minimum hour between the end of the operation will be recorded and given to the command for reading (parameter tWRT, or, in other dzherels, tWTR). Vrahoyuchi, scho deyaki virobniki to induce the value of the parameter for their memory modules, the optimal option would be Auto.
Trfc0 for DIMM0. Possible meanings: to lie down according to the type of memory, you can also use the option Auto. The option is analogous to the Row Refresh Cyc Time only allows you to enter the parameters of the memory module inserted into the first rose.
Trfc1 for DIMM1. Allows you to enter the parameters of the memory module inserted before another rose.
Trfc2 for DIMM2. Allowing to enter the parameters of the memory module inserted in the third rose.
Trfc3 for DIMM3. Allows you to enter the parameters of the memory module inserted into the quarters of roses.
(Twr) Write Recovery Time. Possible meanings: to lie down according to the type of memory, you can also use the option Auto. I will install the boot up at the end of the operation and record it with a little bit of memory regeneration (part of the tRAS parameter). The name of the parameter is called the hour of the update to the recording cycle, the faster the value is tWR. SDRAM memory is characterized by pickups in 1 or 2 cycles, DDR SDRAM is characterized by pickups in 1 to 4 clocks, DDR2 SDRAM - in 1 to 6 clocks, DDR3 SDRAM - in 1 to 15 clocks. Oskіlki know the correct value of the parameter for specific memory modules to finish smoothly, the optimal option would be the Auto setting.
(Trtp) Precharge Time. Possible values: 2, 3, 4, Auto. Minimum interval between giving the command for reading before the command for the front charge (parameter tRTP). Values can be set from 2 to 4 cycles, Auto allows you to automatically set the required value.
(Trc) Row Cycle Time. Possible meanings: to lie down according to the type of memory, you can also use the option Auto. Set the number of cycles, it will be required for a second cycle to access to the row of data (parameter tRC in the access diagram). For SDRAM, let it be in the range from 6 to 8 clocks, for DDR SDRAM - from 7 to 11 clocks, for DDR2 SDRAM - from 13 to 20 clocks, for DDR3 SDRAM - from 24 to 40 clocks. As a variant of Auto, the information is taken from the SPD microcircuit.
Rotated to the parameters in Fig. 5 and prodovzhuєmo. For the sake of beauty in fig. 5, I duplicated:
Tiger Intelligent Stepping. The option allows automatic release of computer components (processor, RAM, tires). When choosing Auto (or Default), the standard values of all frequencies will be selected, Manual will allow you to adjust all parameters, and Energy Saving, Office, Data Mining, Power Gaming (as option, Step 1, Step 2 and Step 3) є ready-made profiles for acceleration ( From the minimum to the maximum). Do not forget that rozgin can make your computer unstable.
CPU Frequency. This is the frequency of the system bus of the processor. Regardless of the BIOS version, the frequency of the system bus can be both physical and the frequency of data transmission is effective. You can store the parameters from the processor model.
PCIE Clock. Available values: from 100Mhz to 145M-200Mhz. Allowing to set the working frequency for the PCI Express bus. Normal value is 100 MHz. PCI Express bus rozgіn you should not practice. Navpaki, during overclocking, the PCI Express bus frequency will be fixed at 100 MHz.
CPU Clock Multiplier Allows you to set the processor multiplier (adjusting the frequency of the robotic processor to the physical frequency of the system bus). Vistaviti Auto.
AMD K8 Cool control. Energy saving technology from AMD company. With a small navantazhennі or a simple processor will automatically change the frequency of that energy, lowering this rank of its energy efficiency. As soon as the growth rate is increased, the frequency of that pressure will automatically increase to its normal values. It is recommended that you use the selected technology (Auto).
PCI / SATA / HT Spread Spectrum. The inclusion of three additional options to change the level of the electromagnetic viprominuvannya computer for the opening of the highest form of signals in the PCI Express bus / bus, SATA / bus, HyperTransport apparently. Obviously, the functions can be displayed as you are flooded by the computer's ram.
CPU Vcore Over Voltage Setting. Allowing to manually adjust the vivification of the processor core. Set Default, if you don’t use the boom, it’s worth it. It is not recommended that the processor core liven up by 0.2 more than the standard value (it’s hovering on the processor packaging, it’s showing a lot of diagnostic utilities, it’s not easy to see the average process in BIOS Setup). Do not forget about ample cooling - to see a slight increase in pressure and noticeably increase the thermal imaging of the processor.
DRAM Voltage Select. Allow me to hand over the life of the memory modules. The installation of an advanced power supply allows the memory to reach higher frequencies of the robot memory, and immediately pick up the response when it is hardened. You don’t get involved in overclocking, rather than overclocking the staff for the life of the memory modules. It is not recommended that memory modules live more than 0.2 times higher than the standard value (especially for special memory that is not addressed to overclockers), because there is a great deal of difference in the output of modules from a fret. Do not forget about the sufficient cooling (additional case fans) when driving the memory modules - increasing the energy of the memory while increasing the thermal imaging.
DRAM Voltage Select. Allow me to hand over the system controller to the chipset. Yogo improvement in the development of maternal payment potential in children. If you don’t do overclocking, just pick the Default value. It is not recommended to move the system controller's life to the chipset by 0.2 more than the standard value, because it is a risky input from the motherboard. Do not forget about sufficient cooling (additional housing fans) - the increase in pressure increases the thermal imaging of the chipset.
LDT Voltage Select. Yes, you can use the HyperTransport tire, as a result of the systemicity. AMD processors... There is a need for a whole lot of errors when overclocking the processor as one from every entry to adjust the stability of the computer's robot. However, in most cases it is not necessary to have any problems - it is recommended to overload the standard value of 1.2V (option Default). LDT (Lightning Data Transport) is a black (working) version of the name of the HyperTransport tire.
Many of the materials describe practically all the parameters that are installed in the Setup BIOS program from AWARD Software International Inc. In a specific motherboard, there are some parameters that can be described. Some of the parameters themselves can be named in a simple way, from the motherboard feeder, so some of the options have been set for some of them.
BIOS FEATURES Setup
Virus Warning
I added the fence parameter be-like a record bunker sector hard drive without the permission of a koristuvach. Win introductions for capturing the so-called boot-viruses, scho opposing the capturing sector. It is recommended that you set the Virishuvati parameter, ale later, for example, Windows 95 after the hour of installation "hangs", if Virus Warning is set to Enable (when the screen shows a black square).
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Boot Virus Detection
The most sensitive parameter is displayed as Virus Warning. The idea of a field in the offensive - if the parameter is hardened, then before the operating system and BIOS are locked, the locked sector will be rewritten in the flash memory that is locked there. If the parameter is set to the Enabled BIOS value, the system will not be locked from the hard disk, but instead of the boot sector, it will be displayed from what is saved in memory. Dal, on the thought of a koristuvach, you can either lock the system from a hard disk, or from a floppy disk.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
CPU Internal Cache / External Cache
Allow / fence the internal or external cache of the processor. Take away any kind of cache memory if you only need to trust the computer's robot, for example, if you install an old pay extension.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
CPU Level 1 Cache / CPU Level_2 Cache
Allow / fence the cache of the first level and the cache of the processor of another level for the processors of the Pentium Pro architecture (Pentium II, Deshutes too). Take away the cache memory next to it, if you only need to trust the computer's robot, for example, if you install an old payment for an extension.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
CPU Level 2 Cache ECC Check
This parameter can be used only for motherboards with Pentium II architecture processors. Allowing it sense only in that case, when installing a Pentium II processor class, the cache memory can be of a different level with the possibility of ECC control.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
BIOS Update
The added parameter allows you to control the BIOS microcode. At the same time, there can be new menu items, in addition to which you can more accurately adjust the systems for individual views (for example, the type of insanity).
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
CPU Fast String (Quick operations with rows)
The addition of a parameter allows you to select the specific features of the architecture of the Pentium Pro family (Pentium II, Deshutes are thin), but the possibility of caching operations with rows is still possible. It is necessary to deprive yourself of the intelligence, which in the most programs may become a visitor to the inclusion of a mechanism. Speak from the documentation for any processor of the family. The parameter is recommended to be left in the "Allowed" setting.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Deturbo Mode
When the parameter is violated, the FLUSH # signal becomes active and no data is cached by the processor from its internal cache (the first cache) by Pentium Pro processors (Pentium II, Deshutes, etc.). I added a certain parameter after the vicorists are deprived of the need to trust the computer's robot.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Quick Power On Self Test
Add the tsy parameter to a significant hour on the cob of the BIOS computer test, especially in case of significant operative memory liabilities. Slide only vrahuvati, so the memory, for example, is not tested in any way, but only to be overturned.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Boot Sequence
The parameter will set the last of the operation of the attachments, which can be used to lock the operating system. These attachments are known either as letters for physical hard disks or for extra drives, or, by the name of the add-on, a CD-ROM for accumulate in CD-ROM LS for drives a: drive for 120 Mb or ZIP for drives for ZIP IDE for 100 Mb.
For the latest versions, you can use the following view:
- C only
- CD-ROM, C
- LS / ZIP, C
- etc.
Swap Floppy Drive
As it is allowed, then drive A and B change in a moment. There is a lack of sensation for the presence of 2 drives from a computer.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Boot Up Floppy Seek
If the parameter is allowed, then the BIOS is turned up to the skin drive in the format (40_about 80 pages for the drive). Oscillations already since 1993 will not be used for a 40-way drive, the parameter is not allowed, BIOS overshoot will take less than a few seconds for the format of the drive.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Boot Up NumLock Status
The addition of the parameter includes the NumLock indicator and the digital keyboard, the generators of the codes of numbers and signs, the keys are generated by the codes of the arrows, Ins, Del too.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Typematic Rate Setting
Allows you to abort the speed of the repetition of the introduction of symbols in the keyboard when pressing the keyboard.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Typematic Rate (Chars / Sec)
The parameter is only in the same category as the Typematic Rate Setting is allowed.
The repetition frequency is a series of fixed values, which can be adopted as a parameter:
Typematic Delay (Msec)
I set the value of capturing from the moment the keyboard is pressed until the cob repeats the symbol with the keyboard. To fix the leash in that vipadku, if Typematic Rate Setting is allowed.
The value can be vibrated from the following row:
PS / 2 Mouse Function Control
If you add another parameter to the IRQ12 port, you will be deprived of the PS / 2 port. In general, for the duration of the connection to the computer, Misha with the PS / 2 interface, IRQ12 is suitable for their attachments. It is recommended to set the value to Auto.
You can also accept the following values:
- Enabled - allowed and IRQ12 busy
- Auto - BIOS visibility or PS / 2 visibility
OS / 2 Onboard Memory> 64MB (Vibrating value for OS / 2, as memory is more, less than 64 MB)
If you are allowed to see two minds - more, less than 64 MB of memory is installed in the computer and OS / 2 is installed as an operating system.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
PCI / VGA Palette Snoop
The parameter should be displayed if the color is incorrectly displayed on the screen. As a rule, the whole effect can be found in the case of such non-standard attachments, such as MPEG-pictures, 3D attachments and additional attachments.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Video ROM BIOS Shadow
Add a second parameter before transferring the BIOS video from the PZP (permanent attachment) on the video card to the main memory of the computer, which will also accelerate the robot from the BIOS video (this is necessary and is visible in DOS). It’s quick to explain that it’s a bit more stuffing up to ROM, down to RAM, so it’s like stuffing up to ROM in 8-bit sitts, and up to RAM - 32 or 64-bit.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Floppy Disk Access Control (R / W)
The added parameter allows you to write information to a floppy disk, and you can read a floppy disk. The whole parameter is going to be used for retrieving unauthorized copies from the computer.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
CHIPSET FEATURES Setup
AUTO Configuration
MA 3 values:
- 60 ns - set access parameters for DRAM from shvidcodeyu 60 ns
- 70 ns - those for memory with shvidkodієyu 70 ns
- Disabled - allow you to set whether parameters are available for access to DRAM memory
DRAM RAS # Precharge Time
This function allows the number of clock cycles of the system bus to form the RAS signal. The change in meaning is increased to a higher level, but more overwhelming for a particular memory, the change can be brought to the end of the tribute.
Acceptance value:
DRAM R / W Leadoff Timing
The number of clock cycles on the bus is determined before the start of any operations from DRAM.
- 8/7 - vіsіm bars for reading and seven bars for writing
- 7/5 - seven bars for reading and five bars for writing
DRAM RAS to CAS Delay
It takes an hour to get to the memory of the animal until the end of the row, and it’s just one way out of one. The whole parameter is the initial value of one signal from the other. The change in value is increased by shvidkodiyu.
Parameter can be added value:
- 3 - three takti zatrimki
- 2 - two takti zatrimki.
DRAM Read Burst Timing
The power supply for reading and recording is generated by the processor at the chotiri razdilny phase. At the first phase, the beast begins to grow up to a specific area of memory, and in quietly, too much, it’s readily available. The change of the total number of tactics is being promoted by the Swedish code.
Parameter can be added value:
- x2222 - two takti zatrimki
- x3333 - three takti zatrimki
- x4444 - chotiri takti zatrimki.
Speculative Leadoff
The construction of a given parameter allows a signal to be read from a trocha before, below the address, it will be decoded. Tsey priyom lowering the zagalny vitrati for the operation of the reading. In other words, the processor initiates the read signal at once from the generation of this address, if the necessary data is found. The read signal is received by the DRAM controller and if the Speculative Leadoff parameter of permissions, the controller will see the read signal until the end of address decoding.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Turn-Around Insertion
While the parameter is allowed (Enabled), between two last cycles of the operation before the memory, one additional cycle is turned on. The growth of the quality is changed by the code, but the reliability during the operations of reading / writing.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Data Integrity (PAR / ECC)
Allowing / fence control of memory for pardons. Viglyad control is set to DRAM ECC / PARITY Select. To activate the system of options, the memory modules with an additional function are required.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
DRAM ECC / PARITY Select
The parameter is unavailable for the 430HX set (for example, on the ASUSTeK P / I-P55T2P4 motherboard), or 440FX / LX, if the memory modules are installed from the true partner. For some BIOS versions, the parameter can be set to change the type of conversion, and it is possible to set up the conversion with the Data Integrity (PAR / ECC) parameter. These planks are often referred to as 36-bit strips.
You can also accept the following values:
- Parity - at the start of the monitor, you will see the news about the pairing in the memory of the computer's robot.
- ECC - Error Control Correction As soon as it’s not alone, the robot of the computer can also creep. As soon as Intel's tribute is lost, the speed of exchange from memory when the mode is turned on will decrease by about 3%.
Fast RAS # to CAS # Delay
When the memory is regenerated, the rows are 100% addressed, and the parameter will set the interval between the RAS and CAS signals.
SDRAM Configuration
The parameter is set, the fault of the BIOS program itself is from the start of the clock characteristics for access to the memory on the display of the information from the SPD block, and to allow the process of koristuvachev.
You can also accept the following values:
- By SPD - access parameters are set for SPD
- 7 ns (143 Mhz) - the parameters for access are installed by the BIOS for memory with an hour of access 7 ns with a bus frequency of 143 MHz
- 8 ns (125 Mhz) - the parameters for access are set by the BIOS as for memory with an hour of access 8 ns with a bus frequency of 125 MHz
- Disabled - get started
SDRAM RAS Precharge Time
The parameter permits the start of the memory or the accumulated RAS charge before the cob to the memory regeneration cycle. The introduction of the Fast value has increased the speed, ale Slow will increase the stability of the robot's computer, the meaning of Fast has later become more important in memory.
You can also accept the following values:
- Fast - shvidko
- Slow - by and large
SDRAM (CAS Lat / RAS-to-CAS) (Synchronous memory - catching CAS / Vid RAS to CAS)
This parameter allows you to vibrate between the trivial CAS signal and between the RAS and CAS signals. The value of the parameter lies in the characteristics of the SDRAM, which are stuck in the motherboard, that is, in the shvidcode of the processor. To that, the parameter of the varto is protected in the edge.
You can also accept the following values:
SDRAM CAS to RAS Delay
The parameter is the initial value of the reception when the RAS signal appears before the CAS signal appears in the synchronous memory. Chim is less valuable, team better access before the memory. Protect it with care.
Parameter can be added value:
- 3 - three takti zatrimki
- 2 - two takti zatrimki
SDRAM CAS # Latency
I set the visualization of the CAS signal for SDRAM. The least significant increase in the productivity of the system. It is recommended to set to a lower value for SDRAM from 10 ns shvidcodeyu or more beautiful.
You can also accept the following values:
SDRAM Banks Close Policy
The boolean parameter was introduced for cards from the 440LX dial through those, which memory from 2 bank organization is not correct for these cards, as the parameters can be accessed to the memory banks installed for substitutions. The set 430TX is not required, so the access rules for the memory of the boule are the same. Change the BIOS settings for the promises for the whole parameter, which would be less than memory for any unstable robot.
You can also accept the following values:
- Page Miss - victorious for two-bank memory
- Arbitration - for memory of 4 banks.
DRAM Idle Timer
The whole parameter is the beginning of the hour (at measures) until the close of all the critical sides of the memory. Injection yak on EDO, and on SDRAM memory.
You can also accept the following values:
Snoop Ahead (Prophecy)
The built-in capacity of this parameter allows the streaming exchange of data from PCI and memory, transferring, as data will be needed at the coming moment and by ourselves to expedite the transfer of data.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Host Bus Fast Data Ready
Add the tsi parameter to allow the knowledge of the data from the tire at once with a vibration. In the beginning of the day, you will be able to use the tires for one additional beat.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Refresh RAS # Assertion
This parameter sets the number of cycles (i.e. the triviality of RAS) to the regeneration cycle. The value, which is accepted, is in the form of a memory and a set of microcircuits (chipset). The least significant increase in productivity.
MA Wait State
The parameter allows you to get up or to take a pre-order tact of cleaning, first reading the memory. For the memory of the EDO type, one measure is determined є for the change and the adjustment of the Slow value is added one more measure of refinement. For SDRAM, there is no clock cycle for switching and setting Slow to enter one clock cycle.
You can also accept the following values:
- Slow - add one measure;
- Fast - not a bit of a touch-up.
SDRAM Speculative Read
The construction of a given parameter allows a signal to be read from a trocha before, below the address, it will be decoded. Tsey priyom lowering the zagalny vitrati for the operation of the reading. In other words, the processor initiates the read signal at once from the generation of this address, if the necessary data is found. The read signal is received by the DRAM controller and if the SDRAM Speculative Read parameter is allowed, then the controller will see the read signal until the end of address decoding.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
System BIOS Casheable
Add a second parameter until there is a possibility of caching the memory area behind the system BIOS addresses from F0000H FFFFFH into the cache memory. The parameter will be used only if the cache memory is allowed in the BIOS Features Setup section. If the program will try the viconati operation, I will write it down to the addresses, the system will see about the pardon.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Video BIOS Cacheable
Add a second parameter until the cache memory area appears, behind the BIOS addresses of the video card from C0000H C7FFFH in the cache memory. The parameter will be used only if the cache memory is allowed in the BIOS Features Setup section. If the program will try the viconati operation, I will write it down to the addresses, the system will see about the pardon.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Video Memory Cache Mode
The parameter is valid for Pentium Pro architecture processors (Pentium II, Deshutes too). The Pentium Pro processor has been transferred the ability to change the cache mode from a specific memory area through a special internal register called Memory Type Range Registers - MTRR. In addition, the number of registries for a specific area of memory can be installed by the modes UC (uncached), WC (write combining), WP (write protect), WT (write through) ) and WB (write back). Setting to the USWC mode (uncached, speculative write combining - not keshuvati, the mode of common writing) allows you to speed up the transfer of data via the PCI bus to the video card (up to 90 MB / s replace 8 MB / s). Slid vrahuvati, the video card is responsible for accessing its memory in the range from A0000 - BFFFF (128 kB) and the line buffer to the frame. It would be better to set the USWC mode, otherwise, if there are any problems (the system may not get locked up), set a value for the UC suggestions.
You can also accept the following values:
- UC (uncached) - do not cache
- USWC (uncached, speculative write combining) - not keshuvati, single write mode
Graphics Aperture Size
All parameters must be maximum size Memory areas for viewing video cards with AGP interface. The value for the change, how to get up for the change of living or discount, 4 MB. The BIOS update is accepted, picked up by the motherboard wiper (usually 64 MB).
There are a number of permissions for the graphic aperture:
- 16 MB
- 32 MB
- 64 MB
- 128 MB
- 256 MB
PCI 2.1 Support
Every hour when the parameter is updated, the PCI bus specificity 2.1 is available. Specification 2.1 - the maximum clock frequency of the bus is increased to 66 MHz and the PCI-PCI bridge mechanism is introduced, so that it is possible to take into account the specificity of 2.0, but it’s not allowed to be installed. If there is a problem with PCI, you should pay for the stench of the stench if there is any problem with the PCI (pay off the stench).
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
8 Bit I / O Recovery Time
The parameter is changed in processor clock cycles and when the system starts up, I will add the input / output to the read / write. It is necessary to read it, but the cycle of reading / writing for the addition of the input / output is much better, but not for the memory. Apart from 8-bit attachments to the input / output by themselves, as a rule, more than 16-bit attachments to the input / output. The value of the parameter for the 1st and the second consecutive steps is less than the installation on the computer of any 8-bit attachment.
You can add a value: from 1 to 8 bars.
16 Bit I / O Recovery Time
The parameter is displayed in processor clock cycles and when the system starts up, I will add the input / output to the read / write output. It is necessary to read it, but the cycle of reading / writing for the addition of the input / output is much better, but not for the memory. The value of the parameter for the 1 st next step will be less than the installation on the computer of any 16-bit add-on.
Can be added value: from 1 to 4 steps.
Memory Hole At 15M-16M ("Dirka" in memory in the middle of the 15th megabyte of memory)
The added parameter makes it possible to turn to the attachments of the introduction / vivod yak to the memory for the rakhunok zb_lshiti to access to such attachments. For the function of the mechanism, it is necessary to enable all the programs in the memory area (15 megabytes), so that the BIOS is updated every hour of the display of the parameter. Allowing the parameter to go to the same drop, which is necessary in the documentation for the set in given computers fee.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Peer Concurrancy
The whole parameter allows one hour to pick up anchors on PCI buses.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Chipset Special Features
The whole parameter allowing / introducing new functions, which appeared in the sets HX, VX or TX in some FX.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Passive Release
This parameter enables / disables the mechanism of parallel robot ISA and PCI buses. As long as the parameter is allowed, the processor access to the PCI bus is allowed for the hour of the passive podil. The need for a fence parameter can be detected when the ISA boards are victorious, since the DMA channel is actively defective.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
PCI Delayed Transaction
The presence of this parameter means that on the motherboard there is a 32-bit buffer for processing the exchange to PCI. If the parameter is allowed, then access to the PCI bus is allowed for an hour to access to 8-way attachments on the ISA bus. The price increases the productivity, the cycle of such a growth on the ISA borrows 50-60 PCI bus clock cycles. After the hour of installation on the computer, pay, but the PCI 2.1 specificity is not adopted, the whole parameter is used for the fence.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Parallel Port Mode (ECP + EPP)
The parameter allows you to set the robot modes parallel to the port. Slid vrahovuvati, so the quick exchange for the children in the annexes can be suttuded with correct installation Robot mode and printer port, for example, for external attachments of information acquisition, such as Iomega ZIP Drive LPT.
You can also accept the following values:
- Normal - a very special printer interface, also called SPP
- ECP - Expanded Port
- EPP - printer port extensions
- ECP + EPP - you can vikoristovuvati insult modes
ECP DMA Select (Vibir to DMA channel for ECP mode)
The parameter is unavailable in case of separate building in ECP mode or ECP + EPP in Parallel Port Mode (ECP + EPP). For normal response to the ECP mode, you need to select the DMA channel, which is vibrated from channels 1 or 3.
You can also accept the following values:
- 1 - channel 1
- 3 - channel 3
- Disabled - hardened by vikoristovuvati DMA
Also є point to the selection of the EPP robot mode.
You can also accept the following values:
- EPP 1.9
- EPP 1.7
Onboard PCI IDE Enable
The whole parameter of the keruє distribution of the building / fence of the robotic skin from two channels of the IDE controller installed on the motherboard.
You can also accept the following values:
- Primary - the robot is allowed to leash the first channel
- Secondary - the robot is allowed to deprive another channel
- Both - the robot of both channels is allowed
- Disable - the robot is protected from both channels
IDE PIO Mode
Chotiri parameters allow you to set the robotic mode of the skin disk individually, or allow the BIOS to automatically set the high-speed mode for the disk. For the dermal disc, the parameters are the same. For example, for IDE 0 Master Mode the valid values are: 0, 1, 2, 3, 4 and AUTO.
The UDMA parameter can be set to Auto or Disable.
PnP / PCI Configuration Setup
PNP OS Installed
Install Yes, so that the operating system will accept Plug & Play (eg Windows 95) and No into the Windows Vista. If you selected No, then the BIOS makes the configuration of Plug & Play add-ons.
Resources Controlled By
If it is vibrated with AUTO, then the BIOS will automatically recognize that the DMA channel is re-assigned to all add-ons, connect to the PCI bus, and the parameters will not appear on the screen. In the first place, I will hand over all the parameters. For some BIOS options, the parameter can be set individually for the skin PCI slot and view as follows:
- Slot 1 IRQ
- Slot 2 IRQ
- etc.
Reset Configuration Data
It is recommended to install it at Disabled. When the Enabled BIOS is installed, the Extended System Configuration Data area will be cleared (Extended System Configuration Data - ESCD), in which the system BIOS configuration data will be saved, so that hardware conflicts can be added to those who are "running" with such a rank at will.
IRQ n Assigned to
One of the most advanced types of attachments can be used for the skin re-adaptation of the system: Legacy ISA (classic ISA cards) - Winner pictures for ISA, as well as modems for sound pictures without Plug & Play support. PCI / ISA PnP cards (add-on for PCI bus or add-on for ISA bus because of Plug & Play) - the whole parameter is set to be disabled for add-ons on PCI bus and ISA Plug & Play cards
DMA n Assigned to
One of the following types of attachments can be used for the skin channel of the DMA system: Legacy ISA (classic ISA cards) - Special cards for ISA, such as modems or sound cards without Plug & Play support. The digital cards support the assigned DMA channels according to the documentation on them PCI / ISA PnP (add-on for the PCI bus or add-on for the ISA bus because of the Plug & Play option) - the whole parameter is not set for add-ons on the PCI bus and ISA Plug & Play
PCI IRQ Activated by
Parameter can be accepted value: Level (level) - controller overriding response to signal level Edge (drop) - controller overriding response to signal drop.
PCI IDE IRQ Map to
Allowing you to get overwhelmed IDE controller on the PCI bus at every single location (or fence) on the motherboard and on the add-ons on the ISA bus. The standard re-assignment for ISA is IRQ 14 for the first channel and IRQ 15 for the other channel.
You can also accept the following values:
- PCI IDE IRQ mapping (for PCI IDE)
- PC AT (ISA) (select for ISA)
IRQ n Used By ISA
The parameter is set from IRQ n Assigned to and you can add values:
- No / ICU (n / a configuration utility for ISA) - if the price is set, then the BIOS can be ordered through a change to the authorities. For DOS, you can also use the ISA Configuration Utility software from Intel
- Yes (so) - means that the plug and play mode will not be accepted. It is recommended to use Yes for such cards and if you need it, because if the BIOS fails, it can be a sign of redoing, it’s hard to pick a card on the ISA, the other card, so you can pick up the robot’s component normally.
DMA n Used By ISA
The parameter is set from DMA n Assigned to and you can add values:
- No / ICU (n / a configuration utility for ISA) - if the price is set, then the BIOS can be ordered by the CIM DMA channel to the authorities. For DOS, you can also use ISA Configuration Utility from Intel
- Yes means the DMA channel is connected to any picture on the ISA bus, but not Plug & Play. It is recommended that you select Yes for such cards and the required DMA channels, because in the BIOS you can indicate a channel that is hard to pick up as a card on the ISA;
ISA MEM Block BASE
Deyak cards for the ISA bus can be accessed to the memory, printed on such cards for the singing addresses. This will require BIOS parameters.
You can also accept the following values:
- No / ICU (Ні / ICU) - add a Keruvannya Tsim parameter to the BIOS solution or ICU programs
- C800, CC00, D000, D400, D800 and DC00 - addresses to the memory block.
In addition, there is an additional ISA MEM Block Size parameter (size of the memory block), which is required for that type, as for such ISA cards, the parameter can be set to 8K, 16K, 32K, 64K
Onboard AHA BIOS (Adaptec onboard SCSI BIOS)
Parameter of allowing / introducing BIOS to the embedded SCSI controller and allowing / introducing the robot to the embedded SCSI controller.
You can also accept the following values:
- AUTO - The Adaptec SCSI controller is allowed to bounce and the BIOS to start
- Disabled - Enabled for any value outside the SCSI picture.
ONB AHA BIOS First
The allow / fence parameter starts the BIOS of an embedded Adaptec controller before starting any other SCSI controller.
You can also accept the following values:
- Yes - allowed
- No - hardened
ONB SCSI SE Term. (Terms of the embedded SCSI controller)
Parameter for enabling / disabling the connection of resistors (terminators) on the built-in SCSI controller.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
ONB SCSI LVD Term. (Terms of the embedded SCSI LVD controller)
The parameter for enabling / disabling the connection of the mounting resistors (thermosets) to the built-in SCSI LVD controller. The Keruvannya cim parameter allows the expansion of the SCSI cable up to 25 meters.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
SYMBIOS SCSI BIOS or NCR SCSI BIOS
I connected the SCSI controller on the basis of the NCR 810 microcircuit, which is victorious, for example, in the ASUS SC-200 cards.
You can also accept the following values:
- AUTO - Allowed SCSI controller to bounce and start BIOS for new
- Disabled - Set to cost per SCSI image
PCI Latency Timer
I set the maximum hour (at the bus frequency cycles), by stretching a prism on the PCI bus, you can trim the bus, if you will need to access the bus. The permissible range of variation of the parameter is from 0 to 255 with a crock, a multiple of 8. The value of the parameter should be changed safely, oskilki lie in the concrete implementation of the motherboard.
USB IRQ
Parameter allowing for any override for the USB bus controller. Oscillations in computers are often not readily available, even if they are not allowed for the presence of an attachment on the USB bus in the system.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Power Management Setup
Power Management
Allowing or allowing the BIOS to lower the power supply of the computer, as it is not possible to work behind it, or to protect it.
You can also accept the following values:
- User Define - before the hour of setting the parameter, you can independently set the hour for the transition to the mode of reduced energy consumption
- Min Saving (minimum energy saving) - when the vibration parameter is selected, the computer switches to the mode of reduced energy saving in an hour from 40 minutes to 2 years (to deposit the specific BIOS of the motherboard)
- Max Saving (maximum energy saving) - the computer will switch to the reduced energy saving mode after 10-30 seconds after the robot is attached to it
- Disable (fence energy saving) - fence energy saving mode
Video Off Option
Allowing to get up, at the stage of "jamming" the computer, transfer the monitor to the mode of reduced energy consumption.
You can also accept the following values:
- Susp, Stby -> Off (enabled in Suspend and Standby modes) - the monitor will switch to the reduced power mode when the Suspend mode is set, or Standby
- All modes -> Off (enabled in all modes) - the monitor will be switched to a mode of reduced power consumption in any mode
- Always On - the Nicoli monitor will not transfer to the mode of reduced energy consumption
- Suspend -> Off (enabled in Suspend mode) - the monitor switches to a reduced power consumption mode when the Suspend mode is set.
Video Off Method
The way to switch the monitor into a mode of reduced energy consumption is established.
You can also accept the following values:
- DPMS OFF - reduction of the monitor's energy efficiency to the minimum
- DPMS Reduce ON is a warning monitor and you can visit it
- DPMS Standby - monitor for small energy saving mode
- DPMS Suspend - monitor for super-small energy management
- Blank Screen - the screen is empty, ale the monitor is alive again
- V / H SYNC + Blank - signal signals are indicated - monitor switch to the lowest power mode.
Suspend Switch
The parameter allows you to switch over to the suspend mode (tim-clock zupinki) behind the additional button on the system block. For this, it is necessary to install the SMI jumper on the motherboard from the button on the face panel. As a rule, there is a special Sleep button, or a Turbo button, for a whole lot. Suspend mode є by the mode of maximum reduction of energy consumption by the computer.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Doze Speed
The setting of the clock frequency setting for the Doze mode.
Stby Speed (Processor frequency in Standby mode)
Setting the performance for the clock frequency in the Standby mode.
HDD Power Down
I will install it for about an hour, after every day the hard disk will be disrupted, or it will be disrupted. The parameter does not flow to SCSI disks.
You can also accept the following values:
- From 1 to 15 hilin
- Disabled - hardened
Doze Mode
I will set the hour for the transition or for the fence to move to the first stage of energy reduction.
You can also accept the following values:
- 30 Sec, 1 Min, 2 Min, 4 Min, 8 Min, 20 Min, 30 Min, 40 Min, 1 Hour - hour of crossing (Sec - seconds, Min - hilny, Hour - year)
- Disabled - hardened
Standby Mode
I will set the hour for the passage of the fence to move to another stage of the reduction of energy management.
You can also accept the following values:
- Disabled - hardened
Suspend Mode
I will set the hour for the transition, or for the fence, move to the third stage of lowering energy maintenance.
You can also accept the following values:
- 30 Sec, 1 Min, 2 Min, 4 Min, 8 Min, 20 Min, 30 Min, 40 Min, 1 Hour - hour of crossing (Sec - seconds, Min - hilny, Hour - year)
- Disabled - hardened
PM Events
In the section of the section, it will appear that it is tricky, because of the corruption of which the computer is guilty of "prokidatatsya", as far as the annexes, as the viciousness of the trick, є the beastly.
IRQ 3 (Wake-up)
The growth rate of this parameter is generated before the computer is "awakened" from the modem, or if it is connected to COM2.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
IRQ 4 (Wake-up)
The growth rate of this parameter is generated before the computer is "awakened" from the modem, or if it is connected to COM1.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
IRQ 8 (Wake-up)
I called the parameter to the "awakening" of the computer from the date of the real hour. It is recommended to use it for protection, some of the deyaky programs can use the function of the "alarm clock" of the year of the computer for their own purposes.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
IRQ 12 (Wake-up)
The power of the parameter is increased until the computer is "awakened" from the mish, connected to the PS / 2 port.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
At the onset of the section, these attachments appear, for the activity of such computers, "zanati" is not guilty.
IRQ 3 (COM2)
As long as the computer does not get caught, the computer does not "get stuck", when you connect to the COM2 port, it’s hard to get started.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
IRQ 4 (COM1)
As soon as the computer does not get caught, the computer does not "get stuck", when you connect to the COM1 port, it’s hard to get started.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
IRQ 5 (LPT2)
As long as the parameter is allowed, the computer does not "get stuck", if the connections to the LPT2 port are set (as a rule, the printer) it will be turned off.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
IRQ 6 (Floppy Disk)
As well as the capacity of the parameter is different, the computer does not "go back to sleep", as soon as the beast is stored on nasty disks.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
IRQ 7 (LPT1)
As long as the parameter is allowed, the computer does not "get stuck", if the connections to the LPT1 port are set (start the printer) it will be turned off.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
IRQ 8 (RTC Alarm)
When the parameter is violated, the computer does not "go to sleep", as the RTC (the date of the real hour) is turned into a timer. It is recommended to use it for protection, some of the deyaky programs can use the function of the "alarm clock" of the year of the computer for their own purposes.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
IRQ 9 (IRQ2 Redir)
At the development of the virus parameter, the computer does not "get stuck", like pristіy, scho borrowing 9 (2) overridden, vikorystovutsya.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
IRQ 10 (Reserved)
As long as the parameter is allowed, the computer does not "get stuck", if it’s pristіy, what if it’s a loanє 10 pererivannya, vikoristovutsya.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
IRQ 11 (Reserved)
At the development of the virus parameter, the computer does not "get stuck", like pristіy, scho borrowing 11, wicked.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
IRQ 12 (PS / 2 Mouse)
When the virus parameter is updated, the computer does not "get stuck", as it is pristy, it borrows 12 transfer (Misha, is connected to the PS / 2 port), it doesn’t fail.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
IRQ 13 (Coprocessor)
As soon as the parameter is victorious, the computer does not "get stuck", as the sp_processor is victorious.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
IRQ 14 (Hard Disk)
As long as the parameter is allowed, the computer is not "blue", just up to the hard disk on the first IDE channel.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
IRQ 15 (Reserved)
As long as the parameter is allowed, the computer is not "blue", as long as the hard disk or CD-ROM on another IDE channel.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Power up control
The parameters of the section are designed for the type of control over the dzherel, which is used for dzherel live in the ATX standard and motherboards, so that it can be connected to such a dzherel.
PWR Button
Keruє functions of the Power button on the system block of the computer.
You can also accept the following values:
- Soft off
- Suspend (timchasova zupinka) - when pressing the live button for an hour less than 4 seconds, the computer will go to the stage Suspend lower energy consumption
- No Function - Power button with a quick-change button to enter / vimicannya live.
PWR Up On Modem Act
Calling the parameter allows you to connect the computer for an hour to connect to the modem.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Wake On LAN
At the detection of a given parameter, the computer will appear on a signal from the local hedge. Also, it is more possible to display it when a blank picture is inserted into the computer, which will enable the mode.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
AC PWR Loss Restart
The added parameter allows you to increase the computer's performance. The computer will not turn on when it is updated, and you need to press the Power button again.
You can also accept the following values:
- Enabled - allowed
- Disabled - hardened
Automatic Power Up
Vikoristovuyuchi tsey parameter, you can use the computer at the instruc- tions for an hour, or turn it on at the instruc- tions for that day.
You can also accept the following values:
- Everyday - the hour is entered by the hour, the computer turns on and the hour is at the mark. The hour is entered in the Time (hh: mm: ss) Alarm field in the order of the year: hviliiny: seconds either with the PgUp, PgDn buttons, or without the numbers entered.
- By Date (by date) - the computer will be seen in the tasks of the day and in the tasks of the hour. When a parameter is selected, a field for the hour entered (also for Everyday) appears and a field for entering the day of the month Date of Month Alarm - the day of the month - in this field, the number per month is entered. Tse automatically means that it is possible to program the computer out of the middle of the month.
- Disabled - hardened
In the advanced sections of the BIOS, it is not necessary to read about the characteristics of the computer's attachments. I added the parameters in these sections to allow the BIOS to be read from the parameters, and in some cases about the out-of-bounds.
Fan Monitor section
Chassis Fan Speed (xxxxRPM)
Ignore vibrano, the swiftness of the wrapping of this fan will not be possible. The whole parameter will be displayed only if a special fan is selected dodatkovym visnovk, which can be connected to a special socket on the motherboard. In general, if there is a critical change in performance, the BIOS will be displayed on the screen before the operating system is installed.
CPU Fan Speed (xxxxRPM)
Ignore vibrano, the swiftness of the wrapping of this fan will not be possible. The whole parameter will be displayed only if a special fan is installed with additional options, which can be connected to a special rose on the motherboard. In general, if there is a critical change in performance, the BIOS will be displayed on the screen before the operating system is installed.
Power Fan Speed (xxxxRPM)
Ignore vibrano, the swiftness of the wrapping of this fan will not be possible. In general, if there is a critical change in performance, the BIOS will be displayed on the screen before the operating system is installed. The definition of a certain parameter is possible due to the manifestation of the type of living block.
Thermal Monitor Section
CPU Temperature
I will show the temperature of the processor in degrees Celsius and Fahrenheit. When the Ignore is selected, the temperature will not rise. In the first place, in case of critical temperature adjustments, the BIOS will appear on the screen before the operating system is locked.
MB Temperature
I will show the temperature of the processor in degrees Celsius and Fahrenheit. When the Ignore is selected, the temperature will not rise. In the first place, in case of critical temperature adjustments, the BIOS will appear on the screen before the operating system is locked.
Voltage Monitor Section
At the tsіy section there is a display of harnessing, which is fed to the motherboard by a livelihood, as well as viroblency to the motherboard. Explanation of the parameters is not possible, except for VCORE - the energy of the processor core. Qia springs up, as a rule, on the motherboard.
To go to the menu, adjust the settings on large motherboards, it is necessary to first appear on the screen for the first time using the keys "DEL" or "F2".
For a specific skin type of menu, it can be seen from the previous version of the BIOS of the same virus, but the basic principles of how to adjust it are even more similar. At the end of the day, I will see the menu items on the AMI BIOS application installed on my motherboard.
In a large number of BIOS versions, there is no graphical mode, so you can navigate through the points of adjusting the keyboard, but on the market all the more often there is a version that can be used to adjust and correct the miscellaneous
BIOS application with graphics mode on Asus motherboards.
Vzagal, the topic of overclocking a computer is duzhe tsikava, and even rozgin is the possibility of rejecting a hard-working computer for a few pennies. Alas, it's a pity, it is a pity to clarify all the delicate values of those at the boundaries of the same statute. As soon as I come, I’ll come here for an hour and I’ll try to sort out all the food. But I want to give joy to the Maybut, since you don’t sing in your strengths and don’t have enough knowledge, more beautiful than anything, not chipati, aja improperly adjusted Parameters can produce undesirable results.
There is another important point in the distribution Advanced - tse point USB Configuration. You can name it, at which point there will be a USB attachment robot.
There are situations, if with the new USB keyboard connected, it is easy to learn how to do it. Don’t wait to bark and go back to the store. Chat with friends, u menu item SB 2.0 Controller set to [ Enabled] (allowed).
One of the most important functions of the menu is dialer / fence locked from USB attachments, for example, such as a USB flash drive. To be afraid of the menu items USB Mass Storage Device Configuration.
POWER
This menu item allows you to adjust the parameters for the temperature mode. At a number of points, you can adjust the processor cooling system to the robot and look at the voltage of the cooling unit. Yaksho vi missed my article Yak revise the block of living, I recommend reading it.
As soon as you were aware of the noise of the cooler on the processor or the noise of the additional fan, you need to check the item CPU Fan Profile into mode (Quiet mode).
BOOT
The very point must be known to all those who need to install / re-install the operating system, or simply zipanazhitsya from the enchanted disk, some of them will allow you to install the consistency of entangled attachments.
Vistavity bookstore is available at the menu item Boot Device Priority.
Apparently, in the 1st Boot Device item, we need to vibrate the very settings that we want to add to the front. I have a hard disk ( HDD: PW-WDC WD5000AAKS), other CD-ROM ( CDROM: SM ASUS DRW-1814BL). The third zavantazhvalny prіtіy I vistaviv y mode (enabled), if you can put in there some secure attachments, for example a USB flash drive, usb-cdrom and other.
You can install a number of hard drives in your system. Yak todi vkazati systems from yakogo disk vantageisya. It’s just the menu to keep busy. Hard Disk Drives.
If you have more than one hard drive, all the stench will be transferred to the whole menu item. It is enough for us, as in the front menu, you can see the list of bookings. In my case, the system showed 2 zavanazuvalny attachments: a hard disk and a USB flash drive.
Security - allow to set a password for entering the BIOS . I don’t know why the retailers included yogo in the menu. Boot
There are no two functions here:
- Change Supevisor Password- Set administrator password;
- Change user password- Set the password of the koristuvach.
The nobility needs one special feature, the rights of the koristuvach allow it to be impossible to re-look at the BIOS adjustment and change to the simplest adjustment, for example, the hour and the date. The administrator's password will allow you to work with anything.
If you only set the administrator password, then the computer will be locked, and the password will be supplied only when you enter the BIOS. If you set the password, then the computer will power up the password when the password is locked (for the entrance, you can use a vikoristany, be it from a number of passwords).
TOOLS
This menu item is not available for all BIOSes. Here the virobnik presenting the following tools:
- ASUS EZ Flash 2 - allow the BIOS to be updated directly through the setup menu;
- ASUS O.C. Profile - Allowing to take BIOS parameters in an environment file, so that allowing users to exchange profiles with profiles to adjust the razgon;
- ASUS Ai NET2 - doughє wedges without zavantazhennya OS.
EXIT
For that, as we have built a number of nalashtuvans, it is necessary to take care. The menu item itself is assigned.
- Exit & Save Changes- go and save snakes;
- Exit & Discard Changes- go and skasuvati zroblenі zmіni;
- Discard changes- change messages;
- Load Setup Default s - add standard settings.
Vikonuvati adjusted the BIOS of the computer to be found in the following errors:
- Folding PC "from scratch";
- Replacement of accessories;
- Availability of graphics from the CPU;
- Rozgin of the central processor and operational memory;
- Adjustment of robots and ventilators in the system unit;
- Sound alarm notifications;
- Reinstallation of the operating system.
BIOS setup for Gigabyte motherboards
To enter the BIOS of Gigabyte motherboards, the computer is locked by the onslaught of the Del. On the head side ( M.I.T.CurrentStatus) By the way, I will stream the BIOS version, the frequency multiplier of the system bus, the frequency of the CPU and the operative memory, the amount of memory, the temperature and the pressure of the central processor.
Operational memory
On the ear of 2018, the most popular type of RAM for a PC is DDR4, the frequency is 4266 MHz, which is more useful than DDR3. For promovchannyam memory RAM work at frequencies of 2133 MHz. It is necessary to transfer it to a frequency, which is based on the specificity. The frequency value is programmed into the X.M.P. For її activation, the parameter is known Advanced Memory Settings, dal - Extreme Memory Profile (X.M.P.) This is the Profile1 value.
For entourage, there is an accessible memory of the memory by the way of the change of time ( Channel A / B Memory Sub Timings) that springs ( DRAM Voltage Control).
Adjusting the video adapter
On the offensive stage, I will concentrate on the graphics adapter. The tab will help us Peripherals... As soon as the system unit is configured to transmit a discrete video card, the graphics core is activated in the CPU: Initial Display Output- Vibiraєmo IGFX. The whole adapter is a vicorist key from the foreign operational memory of the computer. For a change її obsyagu at the razdіlі Chipset klatsaєmo on DVMT Pre-Allocatedі zupinyaєmos on the maximum possible meaning. And in DVMT Total Gfx Mem robimo active size MAX.
For the obviousness of the name of the video card, the parameter Initial Display Output on PCIe 1 slot (PCIEX16 slot) or PCIe 2 slot (PCIEX4 slot), and the value Internal Graphics at the pidmenu Chipset- on Disabled. Reduce the cost of the upgrade on the CPU. For the obviousness of two monitors, you can choose one of two graphic adapters - one that is called and one that is installed - vibrate after one.
Fan control
Who is smarter - is there a minimum temperature in the middle of the body? Look at the type of vicious video adapter. As soon as it sees a lot of heat (at 150 watts), then it seems that it’s not hotter, it’s necessary to see it from the hull. We'll take care of the cooler, which will be installed in the front, in the back of the system unit. Smells plugged in to the latest roses on the motherboard. Along with the light-hearted design, the modern graphics adapter doesn’t have much power. Tom at the great razdilі M.I.T. \ PC Health Status at the pidmenu 1 st System Fan Speed Control, 2 nd System Fan Speed Controlі 3 rd System Fan Speed Control The Normal parameter will be set, which automatically changes the speed of the wrapping of the shovels from the temperature in the system. You can activate the power graph of the number of fallow lands by making the Manual. The meaning of this is established by the children Fan Speed Control for a skin cooler. As soon as the graphics are displayed in the core of the CPU adapter, then the noise reduction is reduced by a very quiet mode - Silent.
At the same time the parameter CPU Fan Speed Control (CPU_FAN Connector) for regulating the performance of the processor cooler. The following options are available: Normal (automatic for the robot, how to stay at the temperature of the cores of the central processor), Silent (fan for reduced performance), Manual (manually controlled), Full Speed (maximum possible steps for wrapping).
Alarm signals
The specifics of the central processors may be based on high performance up to 100 ºС. If the temperature is lower in the middle of the CPU, then the temperature is higher. This BIOS will be prompted to set the boundary value of the parameter, if it is possible to enable the emergency response. Known by the menu M.I.T. \ PC Health Status row CPU / System Temperature Warning... For promotions won the value Disabled. For processors with small thermal imaging, it is recommended to change it to 70 ºС / 158 ºF, and for hot ones - 90 ºС / 194 ºF. The whole parameter is to be kept because the cooler is effective enough to bring in heat from the processor. The price of the adjustment is stagnant for case cooling fans.
The alarm signal is also needed when there is a malfunction in the robot, be it from the fans or the wrong connection to the roses on the system board. To enable the whole function at the same CPU / CPU OPT / System Fan Fail Warning that snake to Enabled. For an hour, the cooler became a passive robot mode on the market. With a small amount of navantazhennі on the central processor, the stench is wrapped up. In such a way, there is a bit too much value for the suggestions - Disabled.
Optimization of the robotics of peripheral attachments
For the installation of the operating system, it is necessary that the computer is running before the disk is started, and there is a distribution kit for the operating system. You can set the parameters in BIOS Features, having gone to Boot Option Priorities, de yak first zavanazhvalny disk vibrate HDD, SSD, USB or DVD.
The system should be installed at once on a solid-state accumulator, like with the best rank practice in AHCI mode. Activuvati yogo is possible at the razdіlі Peripherals - SATA Configuration that yogo pіdrozdіlі SATA Mode Selection... Right there, ale in the submenu External SATA Includes external attachments with SATA interface.
Any motherboard has an audio controller. Iakshcho koristuvach doesn’t power the sound quality, doesn’t do it to the PCI port, or USB call sound card... Todi it is necessary to integrate the sound from the menu Chipset – Audio Controller.
Conclusions stage
Confirmation of BIOS changes Save &Exit:
- Save &Exit Setup- saving the correctness of that vykhid;
- ExitWithoutSaving- View without amendments;
- Load Optimized Defaults- fixing the optimal parameters for the promises, as required for updating the BIOS or clearing the CMOS parameters.
BIOS setup for Asus motherboards
Schob go to the BIOS of the system board of the Asus virobnik, follow Del or F2. There are two modes available - EZ Modeі Advanced Mode... To get enlisted for the candidates EZ Mode... To go to another country, you need to know what you can do at the bottom or you can use the key F7. Read the report Advanced Mode.
The options, which indicate for the robot coolers in the system, are located in QFan Control (F6)... There are installed and manual profiles for processor and case fans: Standard, Silent, Turbo, Full Speed, Manual. In manual mode, it is possible to persuade the skin cooler to wrap around the temperature depending on the temperature.
You can see the function of keruvannya oholodzhuvachami in the menu Monitor \ Q-Fan Configuration... Available regulation and 3-pin fans, vibrating DC Mode.
Utilita EZ Tuning Wizard (F11) Allowing the processor to be cooled to the type of cooling. Tse is relevant for vlasniks Intel processors with index K. In the submenu OS vibraєmo scenarios for the computer of the hungry victorian (Daily Computing) and the game PC (Gaming / Media Editing). Then click on the pictogram with a boxed, tower or stand-alone cooler and start the tuning process.
Activation of the XMP profile for operational memory is displayed in the submenu.
For graphics embedded in the CPU, it is necessary to split Advanced \ System Agent (SA) Configuration \ Graphics Configuration \ Primary Display display the IGFX value, and the discrete video adapter - PEG.
Robot storage mode with SATA interface Advanced \ PCH Storage Configuration \ SATA Mode Selection... Vibiraєmo AHCI. Right there point S.M.A.R.T. Status Check I will forget about the monitoring of hard drives and more about pardons in their robots.
The speed of SSD attachments is reduced in an hour by the world of free space. Utilita Secure erase by the menu Tool optimize the robot of solid accumulators, rotate the cob productivity.
Information about all connected information can be viewed in Advanced \ HDD / SSD Smart Information.
Enabling / Enabling the audio controller plugged into the motherboard, go to the submenu Advanced \ HD Audio Controller.
The priority of adding add-ons is set in the menu Boot \ Boot Option Priorities.
Saving and saving changes to BIOS, setting optimal factory parameters in available in the main menu Exit.
Adjusting the BIOS is important for quietly, but pragmatically, from the folded configuration of the computer to the maximum return. To that, before the installation of the operating system, it is necessary to read the procedure in detail, as described in the instructions, to be installed in the box with the motherboard.
