Yak install the image of the tib system to the drive Svorennya, copy, update the Windows image behind the help of Ghost

Proceed with computers, it is necessary to connect with operating systems. Operational system - heart software security computer, shell, de vidbuvayutsya all basic diy. I operating systems, as and a large number of other software products, not stolen from evil diseases. And be it, your computer may simply not turn on. As soon as it will become, it will be necessary to get a special specialist for the renewal of the tribute. If you have received the necessary donations, if there is no need, then the installation process will be trivial. operating systems, drivers for attachments and third-party software security.

Do not bring it to the end and do not turn out to be an expensive hour, it is necessary to think in advance about create backup window(windows 7, windows XP and ін. OS).

Describing my method of storing the image installed windows that of a fake update on computers with hard IDE drives that SATA.

For root system image we will vikoristovuvati utilit Symantec ghost Version 11.0. Utilita allows you to create images of disks razdіlіv windows and not only, but also take the data. The staff of the technology archivuvannya, how to get stuck, look at two, or even more, if less than the size of the original part or disk. The program allows you to work with DOS, so it reduces the number of pardons and increases the reliability of the process.

Now, in order, the whole process:

Banned flash drive with Ghost software

1. Zavantazhuєmo archiv.

• dos- Folder with DOS batch files
• USB- folder with autostart files, drivers and programs (VK, Ghost)
• SP27608.exe- Utilita HP USB Disk Storage Format Tool

1. Copy to the root of the formatted flash drive in place of the folder USB.

All of us used the Symantec Ghost software to enqueue a USB flash drive.

Setting up the image of windows (this is how you can open the image of any operating system)

1. Vіknі vibiraєmo hard drive, the image of which one needs to be set, or on which placements the necessary section and embossing are OK

1. If you have vibrated the root of the disk image, then go to the offensive point, if you copy it, then at the offensive point you select the required

1. Vibiraєmo misce, de-save the archived backup copy of that yogo im'ya

1. Vibraєmo one of the options for stitching the finished image

#- without squeezing (the best method, a little more common archive)

Fast- Shvidky mode (middle triviality, middle obsyag archive)

High- the maximum squeeze (found from the three modes, and the one with the lowest size of the archive).

I want to give you a vlashtovu option Fast(Image of operational Windows systems 7 sec installed drivers that programs that borrow about 15 gigabytes on a disk, 6.5 gigabytes of Wiishov).

1. Check before the end of the process of establishing the image, we will recognize the confirmation about the success of the viconane, embossed Continue This is available from the programs.

All! The image of the folds!

I now on power: How to create a windows image? you will be able to adapt. I don’t lose sight, but let it go!

Update windows from image (backup)

Here, it’s just like that, when it comes to the system’s image, only in the ringing order.

1. Repeatly dotted 1-4 yak at razdіlі vische.
2. Because of the fact that it needs to be updated, the disk is distributed from the image, vibrated Local - Disk - From Image abo Local - Partition - From Image for sure.
3. The attacker has a vibrant image .GHO, Developments in the whole program earlier, with a backup copy.
4. I vibrate at the same time as a new disc (disc).
5. Viconuєmo for the image.

All! I'm looking for successful windows updates!

Uwaga! If you want to update the operating system in such a way on new hard a disk that has not yet been victorious for the signs, which in front of the front needs to be formatted using third-party utilities.

The first is another option of reservation, about which I want to be flexible.

Copy windows to your hard drive

Vikoristovuchi Danish method it is possible to transfer the working operating system using drivers, programs that have been adjusted to the first hard disk (for example, when you bought a new windowster and save your windows). Tsey sposib also allow you to save yourself in less than an hour.

1. Points 1-4 analogous food description
2. Since it is necessary to transfer it, only if it was removed from the operating system or a hard disk, vibrated Local - Partition - To Partition abo Local - Disk - To Disk for sure.

1. Vibrating hard drive
2. As soon as you carry the disc, then go to the offensive point, if you copy it, then in the offensive window you select the necessary
3. Vibiraєmo mіsce priznachennya (distributed on a new disc and disc) Pidtverdzhuєmo namir copying danі.

Uwaga! Effort on the new disk (distribution) will be included.

PS: in Danish hour in the net you can add images of live systems with a great number of programs on board, including Symantec Ghost. If you have such an image or a USB flash drive locked with such a live-system, then you can quickly use it, and do not open the USB flash drive from DOS.

"asked the food: "How can I burn the image to disk?".

I’ve reviewed the food chain, and then I’ve finished the lecture about those who can take a disk image on a computer?

So is it a disk image?

Disk image (image) - the whole file, which revenge on a copy of a CD, DVD, partition hard disk, flash drives, etc.

Disk Image Freeze Views as File Extensions .ISO, but also you will see іnshі vidi images - NRG, MDF, MDS that іnshі.

Also, if V has tampered with the disk image, then V can:

1. Burn the image to disc (CD or DVD);

2. Wiynyati vm_st the image on a hard disk;

3. Zrobiti virtual ghost That will be added to the new disk image.

Available for presentation options:

Option 1 - Burning the image to disc.

To burn an image to a disc (CD / DVD), you can quickly be a software for burning discs.

I will write down the butt in the program CDBburnerXP.

You can sign up on the official website: https://cdburnerxp.se/ru/home

If you want to start the program choose the option "Burn ISO image" and click "OK":

In the new window, for the additional Browse button, add a file to an image that needs to be written to disk.

The process of recording will be better.

After the completion of the disc recording, there will be a revision of the recorded tributes. As soon as there will be pardons, you will be able to do it as soon as possible.

Option 2 - Wijmaєmo instead of the image on the hard disk.

The whole option will be brown in quiet vipads, if you don’t need vikoristovuvati in all the way, but you want to restore access to the singing files, so that you can take advantage of the new ones.

In general, it is simpler to copy the files (vityagti from the image) to the hard disk and visualize the image, which is not needed anymore.

You have installed file manager"Total Commander", then the simplest operation of the viconati on the other side, some of them can be used with images and archives, like the extra folders on computers.

To do this, just go to the image and copy the necessary files, or the entire image to the hard disk.

If you don’t use Total Commander, then Vityagti in the place of the image is possible with the help of the architect.

I can see the operation from the butt of the architect WinRar.

WinRar blackmailing can be done on the following sites: http://www.rarlab.com/download.htm and http://www.win-rar.ru/download/

Run WinRar and know the file on the computer for additional buttons:

See the necessary files / folders or the whole image (click on the keyboard Ctrl + A) and download "Viluchiti":

For a new window, it is necessary to provide a path to remove files from the archive (image):

If you want to follow the instructions, the files will be inserted into the folder where the disk image is located. (1) .

Also, you can vibrate іnshe mіsce for files (2) ... For that, yak shlyakh is said to be forgiven for the contributions, "OK" for otrimannya files.

Start copying files from the image to the hard disk.

Option 3 - A new virtual drive and a montuimo disk image.

Virtual ghost- tse prist_y, which is designed by the system as an extraordinary primer for reading disks.

There is such a ghost for an additional PZ, for example, DAEMON Tools.

Tsei way, it’s not necessary, in the first place, to write the image to a disc, but in a different way, a disc in a virtual drive is more efficient than in a virtual drive.

It is easy to see how to set a virtual view in the DAEMON Tools program.

You can sign up for the program from the official website: http://www.daemon-tools.cc/ukr/downloads

To lock the vibrate bezel-less version Lite:

When DAEMON Tools is installed, start and go to the tab "Images" (1):

Now it is necessary to add images of disks to the program.

In the region (2) , de display the images of the disks, press the right button and press the mouse and vibrate "Add Images" abo "Scan PC for Images".

If you vibrate "Scan PC for Images", then there will be a sound of images all over your computer, you can take an hour. It’s easier for that self to impose an image by making "Add Images".

By sending a choice of images, the stench will be displayed on the program axis for such a view:

To lock the disk image from the virtual drive, click on the new right button and click on the command "Montuvati (Mount)" (1) :

You can also press a button "Quick Mount" (2), vibrate the image on the hard disk (without first adding it to the DAEMON Tools catalog) і in such a rank of fast montuvati.

Mounted images appear at the lower region with programs:

Also, the stench will be displayed by the Windows provider as you bring it.

As a matter of fact, it is possible to process images from a virtual drive as well as from extravagant disks - to display the autorun of the disk, display it from the provider, copy the files thinly.

It is necessary to "vivantage" the disk from the virtual drive, it is necessary to "unmount".

For the whole point the vazivnik at the mounting of the disk image and press the button:

Or press the button on the mounted image to the right of the button and to vibrate the command "Unmount".

The image will be "vivant" from the virtual drive, if it is not already displayed in the lower area of ​​DAEMON Tools and the Windows provider.

At the same time, the image itself gets lost in the catalysis of programs:

To see the image from the DEAMON Tools catalog, you need to press the mouse button on the right (1) the context menu (2) vibrate paragraph "Delete":

The image will be seen from the catalog of programs, or it will be overloaded on the hard disk.

Well, such operations can be viewed with disk images on computers.

I am encouraged, having finished the lesson in brown, and you can write down the image or lock it up from the virtual ghost. As soon as the food was lost, then the whole food supply will be looked at in more detail.

How to update Windows so you don't get bogged down inviting nose Acronis True Image 2016 from an earlier backup? Windows backup copy with pre-installed drivers, established programs that igrami - superb way Saving the system and money for further recovery in case of systemic slaughter, infected with viruses, seeing important files and without problems. Uninvolved in the presence of the standard functionality of the backup system in the Windows warehouse, for these purposes, a third-party software product is used for most purposes. It’s hard to reanimate Windows to upgrade Acronis True Image, as it’s about ten years ahead of the software market from backups and updates. If you have crashed your Windows backup behind the help of Acronis True Image, if you have problems with the system, you can be reanimated by viewing it from the backup. Windows will not be enchanted, you can also use True Image's enhancing nose.

The whole process is clearly visible in detail: it can be installed in Acronis True Image 2016 from a Windows backup, and it is also possible to use an encrypted backup.

Desktop-free trial version of Acronis True Image 2016

Have last versions 2015 and 2016 True Image interface has become simpler and more intuitive than the previous versions. Organization of that zovnishniy viglyad program to become Windows 8.1 and 10: in the designed interface, the simple lines of the form are overlaid, and the great elements of keruvannya to forgive the touch-sensitive keruvannya. The Acronis company declares about the super-performance of the backup copy and the renewal of money - moving, at all 50% faster, less from competitors.

Acronis True Image from 2016 - paid software product... Buy the program, it is not only the functionality of the Windows backup that will be accepted, but also the powerless features:

• a few ways Windows update, including renewal before the hour is blocked by the onslaught of the F11 keys;
• transferring Windows to a computer with іnshim "zalizom";
• bakeless mode robots windows on the stand "pisochnitsi";
• іnshі brown functions.

Acronis will provide you with a full month of testing True Image with a few functional interconnections, including backups and Windows updates. So it is itself that the power of the stem of the enticing nose is not interchangeable. Quickly, with such a bobbin-free version to the maximum, and for the first time, I will add a bobbin-free version of True Image 2016 on the official website of Acronis True Image.

If you want to correct the request for the linked version, you need to send your email address to Acronis. On a new year, the brand comes to take the sheets, which inform about Acronis products, promotions, and prices.

If you want to start the program, you can close the promotions from the start of the input to the cloud recording of the Acronis dark map and confirm the Acronis True Image in the trial mode.

Windows Backup

In True Image we need a first break. Klikaєmo "The whole computer".

Our vipad has a backup copy that is deprived of the system partition from Windows; "Disks that were broken."

At vіknі vibor dzherela backup copying with a tick in the symbol tіlki systemic bottle C... Tisnemo "Ok".

If you have selected a backup copy, you need to use a quick copy of Windows. The program of transferring a copy of the copy in the process of starting to:

• local space of the computer,
• notable media (USB-HDD),
• festoon resources, zokrem, in the dark Acronis.

Is it more beautiful? Hmarne skovische from the creator of the program, it is practical to impose on koristuvacham, for a fee, they are satisfied. Whilst this is a good service from Acronis, be it the only web resource, there is no need to find money for donations, as there is no high-speed Internet. That yak in okremikh vipadki non-native Windows Can you connect to the Internet? Connections to local framing resources can be problematic. Naynadіynіshe mіsce zberіgannya backups- Dodatkovy internal abo callous hard disk. Unsystematic partitions on one and the same hard disk, partitions and system partitions from Windows are not a very good idea, because if a disk breaks down, you will lose without backups.

Our vipad of a new hard disk doesn’t have any, but no connections to the internal HDD;

One of the shares on another internal HDD is specially made for saving Windows backups, which is called a Backup, which is easier to manage when updating. If you select a backup copy in the tree-like structure of the computer, you cannot open the disk drives, a specific path to the folder in the catalog of the backup can be written in the upper graph with the letter "Save a copy in:"... Vibravshi mіsce zberіgannya copy, stamped "Ok".

Next step is to start the backup process. At the bottom of the box at the bottom of the window, the option "Parameters" is installed, the whole set up functionality of Acronis True Image, which allows you to set nimble parameters - for example, set up a periodic backup copy after the storage, or make an incremental copying method before you start Also, in the parameters of the backup storage, it is possible to enable the same types of files or directories, to set up the duplicate copy in an alternative location, and to vibrate the low priority of the Acronis True Image robot for seeing the resources of the computer to parallel operations too little.

Our vipadku go to additional adjustments we will not, but inaccurately proceed to the end of the backup copy. The button "Create a copy" is embossed. All the time, before the speech, Acronis True Image allows you to write a few years at the list of buttons.

Before the hour of the backup copy, at any moment, you can check the checkbox on the display of the computer and go to your right.

After completing the operation, the backup copy will appear at the window of the first program distribution. At the same time, you can start the process of updating from the backup copy - I want Windows, I want some files.

In our case, the process of updating Windows in the middle of the installed programs will not be launched. Easily install and install the new Acronis True Image tool so you can see the Windows update process without getting bogged down.

A part of the bailiff

For the opening of the enchanting nose, go to the tab with the programs "Tools" "Meister of the opening of the enticing noses".

Oskilki bezkoshtovna trial version Acronis True Image 2016 is surrounded by a monthly term of dough, the whole process of not adding a screen to a screen. Prior to the speech, it’s impossible to allow Windows update, but it’s not possible to allow the backup copy to be installed, as it was transferred from the new version of Acronis True Image 2016.

Vibiraєmo The first type of enticing nose.

For an offensive player, it is necessary to vibrate without the need for the medium itself - a DVD-disc, a USB flash drive or an ISO-file for a backup and then I will write it down on any medium. If you choose a DVD or an Acronis True Image flash drive, it will automatically start the burning process. Take a flash drive for a black day - for a bagatokh, melodiously, I will be overwhelmed. It will be practical to see a DVD disc or burn an ISO file, which can, for example, be saved on your computer and at the necessary time to be written to a USB flash drive. Plus, Acronis True Image doesn’t support UEFI flash drives, but for computers with UEFI BIOS, anybody needs to know the software because of the ability to install the most enchanted UEFI flash drives.

Our vipad has a vibrate ISO file that also saves you a lot.

Embossed button "Start".

Zavantazhvalny nose opened.

Windows update

Let’s admit, it’s a big black day, and Windows doesn’t get bogged down. We go into the BIOS and install the locked computer from a DVD-disk or a USB flash drive, shutdown from Acronis True Image. The start-up window of the enchanting nose will be proponied with a number of options for the given projects, if you need to vibrate the launch Acronis True Image 2016 based on a variety of formats.

At the latest update embossed abo "Update backup copies" Acronis True Image itself knew the files in its format, or for the additional buttons "Backup copy" vkazuєmo way to to the required file.

Only the backup copies will appear in the Acronis True Image window, in the context menu and in the "Update" window.

Vibir renewal method: our vipad needs to know about reanimation Windows, and not folders and files, that vibrate "Update disks and razdili"... Tisnemo "Dali".

Vibir of elements for updating: at the end of the list there is a checkmark і system partition C, і record MBR. Tisnemo "Dali".

At the beginning of the installation, there are no changes in our list of changes, which, in principle, will happen if Windows has been transferred, we will distribute it to the other hard disk drive. Tisnemo "Dali".

As soon as the computer is connected to the internal key hard drives, gave Acronis True Image to ask for one of them to update the encrypted MBR. Vkazuumo and embossed "Dali".

The preparation is complete, we can repair the Windows update process.

The automatic restart option and the automatic restart of the computer after the completion of the process are shown. If necessary, it is possible to get vicarious.

The update was successfully completed.

Now we can play again in BIOS booting from the hard disk and reanimated Windows.

Have a wonderful day!

The creation of a customized image of the operating system and the installation of programs is often necessary in the corporate environment, so that the household needs not to be seen from Instalation disc, in which it is possible to love a set of programs that tvіkіv. For modern Windows, this image is much simpler than for Windows XP, but you can use the automatic installation package.

The statistics will change, as the system image will be adjusted and the system image will be adjusted, as well as the backup power of the operating system will be damaged in the WIM image.

On the tsiy side

You know

• Deployment Tools from Windows Assessment and Deployment Kit (ADK)

Crazy, you need a computer to install and adjust the OS, as well as a place to save the system image. Yak computer for installation can be a virtual machine (for example, Hyper-V from Windows warehouse or VirtualBox). You can save the adjustment of the image on the non-system distribution of the computer.

For example, when the system is installed, you can install two sections - one to install the OS, and the other to save the image. Also, virtual machines can be switched on one more virtual disk... In the meantime, you can save the nesting image on a stitching resource or a USB-disk. Yak bachite, options for bagato - є s chogo vibirati.

Perevagi that nedolіki vicoristannya of the adjusted image

At my glance, I will pick up the adjusted image, but I will shrink it for the shortcomings.

Perevagi

• The system is installed with a set of programs, but it does not take an hour to install. Protect, in accordance with the standard rank, the repackaging of the adjusted image of the loan for more than an hour.
• Є Possibility of adjusting the operating system for an additional file of views, so that you can register at the same time.
• There is a possibility of a laryngeal image beyond the help of utilization. ImageX... The standard image can be victorious only if you have installed it after the program has been installed, but not all the parameters have been adjusted (for example, movable).

Incomplete

• To size up the image. Kintseviy size to lay down as a part of the program. If you plan to install it further from the DVD, you need to install 32-bit versions of the 4 GB WIM file (2 ^ 32 bytes).
• You can start the version of the program included in the image. SCHOB pidtrimuvati current versions dodatk_v, get to pick up the image again. Regularly updated programs, better for everything, don't include sense in the image. You can set up an environment by automating the process.

Step up the stem of the shaded image

The vlasny WIM-image can be divided into the following steps:

1. The installation of the system adjustment program
2. Preparing the system for additional utilities sysprep
3. Encrypting Windows PE and saving the image for additional utilities ImageX

After removing the image, you can turn it on to the storage of the storage disk, install it from the stitching resource or use it for help ImageX.

Note about adjusting the parameters of koristuvach

As long as the program is installed, in the audit mode, you can adjust the settings of the koristuvach. There are two ways for storing up the image є two ways.

You can:

• Set up only system parameters, and import only REG files behind the help of the WIM-image (or the external image is still up to the ear of the installation, as described here).
• Establish both the system parameters and the system parameters, and then do not preserve the copy of the profile of the generated regional record for the additional file. Administrator at the profile of a standard koristuvach.

Importing parameters to the register

The very principle of reporting at the statti Zastosuvannya tweaks to the register. I vvazhayu, as you got to know her and added more information about the import of the system parameters.

Copy to profile for an additional view file

To copy the profile of the adjusted regional record from the profile of the standard corystuvach, you can use the file of views, which is to replace the parameter

Microsoft-Windows-Shell-Setup CopyProfile

The value for this parameter is set to true, copy to the profile.

Vikoristovuvati tsu Possibility is required when installing a customized image by clicking on the display file parameter. A copy of the profile will be seen on the aisle 4 Specialize.

Application of a universal display file for 32-bit and 64-bit OS

true true

Why should a copy of a profile be recommended in this statistic when establishing the substitution of what to add to the file with the help of the utility sysprep before the hour of publication?

Copy to a profile at any vidbuvayutsya before the hour of installation at the stage of Specialize. As soon as you select the / unattend parameter for the sysprep utility, the view file will be cached and after the start of the installer. At the time of writing, the first version of the statistics was not correct, it did not care about the documentation.

As soon as you use MDT or SCCM, the descriptions in the statti method є are common for reasons of viciousness in KB973289:

Now about everything in order.

Starting the installation of the operating system from the installation disk and entering the audit mode

The first step in preparing a customized image is to launch the OS from the installed disk. The installation can be configured manually or by automating the process behind an additional view file.

Manual installation

Manual installation doesn’t come with any cunning. If you plan to save the image on the non-system disk partitions, use the Windows Installer to install the partitions.

Porada... When the system is installed on virtual car You can connect another virtual disk and then save your image. To make it easier to copy the image from your working middle, VHD (X) fragments can be connected to a physical machine.

Proceed with the installation right up to the OOBE stage. Yogo easy to recognize on the proposition of the vibrati of the oblivious writing and babies for her.

On the whole stage, not vibrate and write CTRL + SHIFT + F3... Qi combinatsiya klavish put the system into audit mode with the rights of the vbudovan regional record Administrator.

Automatic installation

For the additional view file, you can automate all the steps of Windows instalation, including the kerovanning of the hard disk, enter the audit mode and navigate to the installer of the program, just to be displayed in the statistics. You can see the hover at these instructions right up to the section "Transferring the system to oobe mode" povna automation installation).

Introduced update, system adjustment program

You can enter the audit mode, you can start before the installation, update, the program for adjusting the parameters of the operating system. Do not close the utility sysprep- Wonderful to be able to finish the stage.

As for the installation of programs, or for updating, you need to re-enable the system, you can restore it. If the system is overridden, it will turn to audit mode. As we have already said, the process of installing the program can be automated behind an additional view file. You can set up a systematic setting in a graphical Windows interface. You can also import parameters to the registry from the beginning of the prepared REG files.

For Windows 8 and newer, do not update the programs from the Windows store, which may lead to problems with the image. Seeing the current programs may be required from science. Upgraded at the TechNet library and KB2769827.

Having finished the establishment of the program for the adjustment of the system, you will be guilty of the preparation for the current victorian.

Preparing the system for additional utilities sysprep

For the installation of additional information and adjustment of the system sysprep... It is also because of the fact that the installation method of the viral was vibrated, so it will be easily recognized.

Manual installation

When manually installed systems and utilities sysprep to start before the hour of entering the audit mode. To prepare the system until the next victorian (in this case - before the stem of the adjusted image), it is necessary to set the utilized parameters, as shown on the little one below.

Іf the values ​​\ u200b \ u200bparameters are carried out (at the bows of the equivalent parameters command line sysprep):

1. System preparation (/ generalize) - visibility of unique system parameters, clearing the logs of the pods, resetting the security identifier (SID) to zero. This parameter is necessary for the opening of the adjusted image.
2. Transferring the system to the OOBE mode (/ oobe) - the whole mode will be activated for offensive launch systems.
3. Vimknennya system (/ shutdown).

Application of a universal display file for saving drivers in 32- and 64-bit OS

true true

Automatic installation

If you automate the entry into the audit mode and the installation of the program behind the auxiliary display file, as described in the article Installing the program in the audit mode, you need to complete the synchronous command with the corresponding serial number. The qiu command can be victorious, when manually installed, in front of the front, shutting down the utility sysperp.

% SystemRoot% \ system32 \ sysprep \ sysprep.exe / generalize / oobe / shutdown / quiet

The first three parameters of the command line are indicated in the same order as described in the parameters of the graphical utility. Parameter / quiet- I will secure the robot in quiet mode and is necessary for automation.

For that yak sysprep terminate the robot, the system will be enabled. Now it has been adjusted again, and it is possible to create an image for additional utilities ImageX.

Hiding in Windows PE and saving the image for additional utilities ImageX

Note... Image size install.wim, which can be turned on before the storage of a 32-bit operating system, is not guilty of overhauling 4 GB (2 ^ 32 bytes). The establishment of the event will end with mercy. The tse of obmezhennya does not expand on the growth of the throat to the image beyond the help of utilization. Imagex.

Yaksho nastanovni windows files You can copy and paste the image and display file, and then, after logging into Windows PE and connecting to the stock resource, run the installer from the command row.

Net use y: \\ network_share \ distrib y: \ setup.exe /unattend:unattend.xml

Roseportation of the adjusted image for additional utilization ImageX

Vikoristovuchi Windows PE and utilities ImageX, you can unzip the image on your computer.

The last of them is as follows:

Note... Rose throat to the image for help ImageX You can only on the one that can be used on the disk drive, as a matter of fact, the savings in the image. Besides, for help ImageX it is not possible to rozgortati standard (cob) image Install.wim.

Razglyanmo butt rozgolotannya nastovanny image. Transferred, but the hard disk of the computer is not formatted. After hitching up at Windows PE, it is necessary for additional utilities Diskpart flush and format data on a hard disk. I will demonstrate the stem of one section on a disc.

Diskpart select disk 0 create partition primary select partition 1 active format fs = NTFS label = "System" quick assign letter = c exit

Dodatkov information about command utilities Diskpart you can do it by running ї with the key /? abo s statti Describe by the Diskpart programs with the command row interface. For the bazhannya of the process of distribution, it is possible to automate.

To be overwhelmed is deprived of a zastosuvati image.

Imagex / apply E: \ custom.wim 1 c:

The team has:

• / apply- Gagging the image
• E: \ custom.wim- Go to the image. When spaced by paddle disc first, you need to switch it on with the command net use E: \\ network_share \ images.
• 1 - index of the image saved by the WIM file.
• s: the volume of the volume, until the image is stuck.

Having stuck the image, you can roll over (command dir), scho on razdіlі C There were files that were unpacked from the image. Now, on a whole lot of different distributions, the operating system has been displaced in the same camp, in which one the image has passed at the time of the opening. As soon as the image was saved, it was saved by setting it up in the audit mode, before the hour of the offensive computer uid system have the OOBE mode, give the power of the Viconati pochatkove nalashtuvannya parameters

It’s just an hour of preparation for the image of the bulo vikonano copying the profile of the adjusted regional record, all new regional records mattimut such parameters.

Rosgortannaya nastovanny image behind the help of WDS

You can use the Windows Service (WDS) for displaying a customized image. Detailed report As far as ways to go beyond the scope of the statistics, I will be able to read the posts on the site with WDS, and on Microsoft Technet.

Backing up the operating system from the WIM image

The statisticians have an emphasis on the establishment of additional information and adjustment of the system in the audit mode and the preservation of the image at the stage of establishment. It’s overwhelming because the image is neutral - it’s not a mistake to take revenge on any regional records (except for those), special files and confidential data.

You, you can, please, feed the food, who can save the image of the system and write the end different installations, in order to write the OOBE step, the first entry into the system and the offensive setup. It is also up-to-date, if you want to install the system, correct it at any given hour - install the programs, adjust the parameters, etc., and then create the image.

The riddle about those that the imagex cannot be used for making a mistake (I have changed it - for me).

Otzhe, for storing the image:

• Expanded file attributes are involved. Tse attributes of NTFS, which are necessary for the amazing complexity of programs ... OS / 2.
• The sparse files will be thrown away, but not like that.
• Symbolic powers and data are automatically updated. For deyakikh scenariah (for example, SIS) it should be done before, but do not listen to it.

At my glance, in typical scenarios, victorious clientele OS in domestic minds can be zehtuvati. If you update such an image on your PC (navigate with this very hardware configuration), you can lead to serious conflicts in your possession.

With a lot of moments, if I want to bite your respect.

• Installed programs and special files can take a lot of space on the disk, just to fit the size of the backup WIM image. For image capture, you can use a double ball DVD or a great USB disk.
• You can change the size of the WIM image by including the files and folders in the warehouse when the volume is buried with utilization ImageX... For tsiogo vikoristuu file Wimscript.ini, for a short look at the article about the entangling disc Windows PE. Yogo report to describeє in the pre-file koristuvach Windows PE ", go to the ADK warehouse.

Updates

Updating from the backup WIM image is displayed as described in the statistics section. However, I will put the consistency of the utility commands there. Diskpart it is necessary to speed up.

For example, if there is a number of breaks on the disk, and the system is installed on the first, the sequence of commands for preparing this break will be as follows:

Diskpart select disk 0 select partition 1 active format fs = NTFS label = "System" quick assign letter = c exit

You can turn on the WIM image adjustments to the backup disk storage from Windows PE, having opened the uniformed solution of the system update by yourself - the middle of the update and the backup image.

Visnovok

The function of the larynx is increased by the adjusted system Windows image for help, get in to ADK, є to finish awkward zavdannyam. Such an image can be made neutral (so as not to take revenge on special files and personal tributes), having established additional data and adjusting parameters for the audit mode.

Tsey pidhid allows the visitor to further adjust the image before the hour of setting up the additional view file, and also provides the ability for the finder to set the special parameters on the OOBE stage at the first start of the system. In addition, you can use the WIM-image technology to back up the operating system.

Good day, read the blog site :) The article will be given to the logical advancements of my foremost - about the backup of all operating systems (on Windows applications) together with the programs and files, behind the other two cinnamon programs- Acronis True Image

And now I will tell you how easy it is to update your system from the previous backup and turn it off before I have a backup. Also in this article I will explain how to update the files and folders from the current backup.

It may be known that the system started rapping unstably because of the reasons you didn’t make sense of the problem, because there were still problems with those who were entrusted and so far. In this case, you can simply update from the backup you made earlier. The process is simple and when you update your system, I’m ready to go to the robot: all programs will be installed on it, all files, with which they were processed, everything is set up as if it was earlier before the copy leaves.

Remaining versions of Acronis True Image allow you to update the system from the archive to your computers for a short period of time. The quantity of power will be even more necessary.

Now, it’s clear that it’s necessary to update the system with the current backup copy.

Upgrading the system at once from earlier installation of programs and files with the help of Acronis True Image

We need a mother in front of us on the hands of that nose (for example: new HDD, flash drive) or else the online storage is available, our archives are saved from the backup of all systems. If you are reading the first article, and you don’t know yet, since you have opened the backup copy, I recommend reading the article in front of it, because I’m talking about the story, having gone over the last one.

The process of updating the system of the archive is even simpler. Visible yogo:

Acronis True Image is launched from a shortcut on the desktop or from the Start menu.

If the Acronis program starts, go directly to the tab “ Backup copy that renewal ”. And on the first investment of the onslaught, the "Update" button is highlighted:

A small window will be displayed for a list of previous backups.

If you want to browse those copies, which will be saved on your noteworthy noses (flash drives, call HDD), all one will be displayed in the list, or if you try to update from them without connecting the required nose to the computer, remove the pardon. Once I have my application from the foreground statistics, I can back up the copy to a USB flash drive without plugging it in to the computer at once. Then, when the "Update" button is pressed, the following will appear:

At this time, you need to connect to the computer that famous nose If you want to save the archive from the backup copy and press the "Look around" button, if you want to vibrate the instant, the backup copy will be needed:

You can know the backup copy by immediately pressing the button "Send backup copy ..."

In such a case, you would have to have a provider, you can know that you will need a backup copy on a computer, or in a net.

If the archive from the required backup will be vibrated, the button "Add a list of backup copies" will be pressed at the bottom of the window.

If there is a password hijacking archives, you will immediately appear in a window, you need to enter the whole password:

Now there will be a brand new system update from the archive. At the window, it is necessary to vibrate with the quiet, which were archived, - that is, if you want to know. If you want to update everything, if you have previously stored it in one go with the system, then simply vibrate all the parts from the list, having marked them with a tick.

If you have stored a lot of system dispenses around the system, or if you want your data and if you want to update the system without data dispenses, then just check the boxes only on the system disks (For Windows 7, you need to extend the system disks for the same ").

In such a case, the system at once was adjusted and the programs were updated, but if you didn’t share the data, you wouldn’t be familiar with the data.

Besides the choice of renewal, you can also vibrate the place, in the same stench you will see it. For example, you can change it like this, then it was distributed from the system from the archive, being updated in the first place, or on the other disk. For all it is necessary to click on the right-handed line, name it and display a list of available discs or disks, which can be updated:

Yak can be seen from my butt (image), I can only see one place, where I can see the back. Another second is the meaning of the worm-name and the meaning of the fact that renewal is not a pity. As a rule, it is through marriage the opportunity to renew a large amount of money.

This is also the case for the skin, from the removable dispensing system, because of the given power to change the power. If I’m talking about it, I don’t think about it or go to see the authorities, so for the Acronis speakers it is most effective to do the update without changing the disk structures.

More admonished You can go to the section of the previous authorities, clicking for the section below the section "Vlastivosti razdila", which is updated:




1. Remaining croc before renewal of the update is a prerequisite, as it is necessary to add additional parameters to the stage of the update itself. Breaking through them.

   At the same time, we also know by the stage of the backup copy of the tab: Dodatkovo, Productivity, Possible. Clearly adjusted on the skin deposit.

   Now we have everything set up for updating and you can start the process by pressing the button "Update at a time" at the bottom of the window:

   Opportunities for updating directly from Windows, then, on my own, start Acronis to rewrite the system and on the very cob of the update. As soon as the computer was updated, they ticked the box "If necessary, automatically restart the computer before the renewal hour," the computer will restart itself without powering up.

   If the option is not turned on, then you can deny this option:

   І for the continuation of the reboot, you will need to confirm it yourself by pressing the "Restart" button.

   You can automatically activate the computer immediately after completing the process of updating the system by putting a check mark next to the window (div. The image is displayed).

In order for the update to complete, you can lock your system with programs and all the files, save at that time, if you were using the backup copy. You will no longer have the chance to get Windows up from scratch, install all programs and install them. Now you can simply bootstrap your ready-to-robot system. By hand? :) I think there’s not enough to say "Hi" for reasons :)

Naygolovnіshe, nіchno і nіchno especially folding dumb ... Certainly great deprivation of that which is presented, and the crocs themselves are even simpler.

The process of updating additional files / folders from the current backup is now understandable.

Updating files / folders from a backup copy

It is not forgotten that for updating files / folders to serve as backup copies. About the process of skin shedding from them, I have discussed in the foreground statty.

To update some files, a different type of backup is required.

Otzhe, admittedly, that important documents have been ruined in us, and it is necessary to innovate. We have a backup copy є.

The renovation process is in progress. It’s more simple, not renewed food, it’s not to blame for too much food.

Well, the axes have looked at all the possibilities of updating from the backups, and the whole - from the whole distribution from the system and data and additional files / folders.

All the purposes of being built are foldable, it is enough just to get through with the crimson crocs once and everything will become zerous :)

I will finish the whole article, and in the coming year I will tell you about one important function - the shutdown of the enchanted disk from Acronis and the system's upgrade capabilities, so that the system itself will not be locked up for some reason. In such a case, if the system is "wrecked", then you can't even run the Acronis program from it. For such purposes and requires an update disk from Acronis True Image, which can be updated and updated.

I will check your meals at the comments and from the satisfaction of us! :) Pokey scho;)