Self-closing adapter sata usb. How to make a do-it-yourself sata to usb adapter for a hard drive

In the period of computer technology, the development of ports for communication of the rest and rear is not available. Insha river, scho kіntsevym koristuvacham such a race nі up to what. They didn’t catch the stink to buy one attachment, but that one is no longer suitable. Today we are choosing between sata-usb adapters.

• What is needed
• Instruction
• Please
• Warto turn respect

What is needed

1. Chip converter;
2. Drukovan board;
3. Soldering station;
4. Programmer.

Instruction

In order not to force borrowers, let’s say it’s incredibly simpler and cheaper to go to the nearest computer store, pay the equivalent of a bet of American dollars and take away the right price, spending on it until the end of the day.

Further articles for people who do not tolerate slimy perekonan, require proof that they are simply drunken individuals.

1. You will get a replacement chip-converter. Shards of the usb / sata robotic protocols are different, there is no possibility of “soldering the one conductor here, and the other here, and everything will be fixed”. In this case, it is necessary to recode the signal, which can only generate a chip, but also the command to recode usb to sata. One of the varieties of such chips is shown on the little one.

2. Now you need paid fee. Tse "record", elements are attached to the yak. Vrahovyuchi, scho fee can be s povnіstyu іndivіdualnym razvedennyam for your outbuilding, buy this is not possible. How to raise the fee itself is the same topic, for 10 more articles that have a tidy bag (as well as this - super, you are lucky).

3. To solder the chip to the board and organize the breeding, you need a soldering station.

4. At the end, as if you were a magician, and you were given to see all the instructions ahead, your magic will be needed and given. After the completion of the finished payment, you will need a programmer - attachments, extensions specifically for your payment, to program it for your specific needs.

Yakshcho Vikonali all diї and zanudguvali, you can try zrobiti self-tightening adapter sata ide that s vga on a tulip? We read, we know, we try - we write about the results.

I’ll build the versatility of virobnitstva with my own hands, not vrakhovuyuchi all possessions, to change the store’s price list 30-200 times. Chi varto?

Directly.

Warto turn respect

The skin of the given instructions you happen to win 15 times, so as if you work on a microscopic check, and a powder, which you squandered vipadkovo, star put the whole vikonan on the robot. Is it possible, as you have nothing to occupy your dope mind, varto zmajstruvatsya simpler, for example - a self-made robot?

How to build a do-it-yourself sata usb adapter2.90 out of 50 based on 29 voters. Cheer up for the article - like it. A simple click, but the author is welcome.

How to get a sata ide adapter. Robimo with your own hands

Keeping information on your personal computer is engaged hard drive. Progress, as it seems, can’t stand on the mission, that’s why the speed of work and the arrogance will be gradually improved. Changing generations also means changing interfaces. Let's talk about sata ide adapters today.

• What is needed
• Instruction
• Please
• Warto turn respect

What is needed

Instruction

The fact that the roses of the Sata type is not a development of the ide-connection is not worthy, the remaining standard is still correctly called ATA. After appearing on the Sata-interface market, ATA was renamed to PATA. As you can see, you know, the bus, on a practical basis, boast of a practical frequency of 33 MHz. If you turn to the sata interface, the robot's yoga bus is set to a frequency of 1.5 GHz. Rіznitsya, wait, orderly.

You can see the possibility of understanding the "adapter", because it is not possible to passively connect two extensions that work at different frequencies - for which you need to install a special attachment for which I will call the converter. Yogo task - reshape the input signal of one protocol to another, I will add intelligence for another

1. Let's show a little bit, why a standard adapter-converter for ide and sata is formed.

2. As you can see, the front part is connected to an ide-loop, the back part is recognized for sata. The microcircuit in the center of the payment is paid by the controller itself, which is responsible for converting the input signal to the required weekend. Also, you can remember the rose of life - wine is needed for a quartz oscillator (bliskucha "bath") and controller.

3. The work on "self-study" is not visible to any criticism, after I'll add it to the shop. The lower proof is guilty of getting cleanly in your office for stained glass without any time to finish affordable and cheap accessories.

The price is 4$-15$ - a visual display.

Also find out if you can make an adapter from vga to tulip and sata usb with your own hands.

Remember that, be it the work of electronics in domestic minds, one cannot boast of diligent security. You will not be told to anyone, as your hard drive and controllers are on maternity pay burn through the connection of a third-party annex.

If you happen to have a smell of grease, turn over the temperature of the processor.

Warto turn respect

You can take a look at one representative here.

How to get a sata ide adapter. Robimo DIY3.00 out of 50 based on 10 voters. Cheer up for the article - like it. A simple click, but the author is welcome.

DIY Sata cable

I love you friends, readers and viewers of my blog. In this article, I will tell you about the sata cable. As you can see, all computer technology makers have long switched to sata food.

This article will describe all the nuances of connecting a sata cable, or else call a sata adapter with your own hands. I so rozpochnem process.

Sata cable or sata adapter

For the cob, we need a non-working PC life block. And from the block of life it is necessary to pull the found cable.

The one who found the cable is bad, but even though there is no such obviousness, it can certainly be short.

For more options, there is another rose to the sata cable. You can get rid of it, you can borrow it, if you don’t need it, or for some reason you need it.

My hand has two darts on the supplementary rose, buli zrazani and the need for a non-traditional rose, I had a chance to pick a sata adapter.

Razbir Sata cable

Razbiraєtsya tsey roz'єm even simpler. All darts on the sate sit on plastic buckles, as if it were necessary to lift a knife with a tip.

Do not allow it to be dragged back, without zusilla that without poshkodzhennya, the wire is carefully lifted from the nest.

To cut the needles into the molex and the vicorous tool at the look of the nippers from the woman's manicure set. You can also fasten it with a small electric wire cutter.

Just like all the darts are smashed, we put the darts in their place. Respect when you pick up wires, don’t know them all, otherwise you’ve got a swindler.

Take one pass, zayvy and insert it back. And zrіzanі kintsі wires are cleaned for soldering.

Razbіr moleksu

Preparation for sata cable is connected to our computer's power supply unit via molex roses

For whom it is possible to rose the brother himself rose the Molex. We take a free rose molex on the block of life and we choose it. The lugs on the wires at the moleksi can be a head or a head,

yakі їх trimati at the rose itself. In order to take chotiri droti, we need to know the color of the head and bend the middle of the tip. To know tsyu vushku, vikoristovy yaskravy lіkhtarik.

For example, the eyelet does not need to be thinly twisted, or the knives are close to the tip

As soon as all the darts are taken, it is necessary to solder the cleaned ends of the wires to the sata cable. Solder the leather wire behind the color. As if for some reason you didn’t get far to sleep, you can work on your feet. We take the sata cable to the cable, clean it about 1.5 cm and twist it on the molex tip and twist it so that it does not interfere.

As we said more, the tips of the wires of the molex are trimmed on the ears of the roses, and before that, put the darts on the spot, you need to put the darts on the skin darts.

Everything is chosen by rose molex and sata is a meal. Just lost the sata converter. In my mind, everything works until today.

Yak shvidko zrobiti sata cable

There is one more variant of the sata converter. For what purpose should the sata cable be taken?

Uvaga given method not є bezpechennym so as if it were some hour spent, you can jump out of the plug and close.

Don't beat the zvichayny glues in a different way, it will be more foldable to pick roses.

Why was the article written

Zіshtovhuvavsya if it's hot, but on my block the live didn't get the sata cable for live because of the hard disks.

It would be an option to throw a cable from one hard drive or go to the store and buy a sata adapter.

Ale, so much so that I love to create with my own hands and twist, and I make the cable myself. І croque after crocod went to the process after the flow.

life-pc.com

It is necessary to connect an old HDD 2.5 for 500 GB to the laptop. / hdd:

sata esata hdd sandbox

Need to connect old HDD 2.5 for 500 GB to laptop. It’s not necessary to be generous with the purchase of an adapter, but if you do it with your own hands, give + to the mood when you win)

The axis itself is a hard disk with a SATA socket

Roz'em life via USB to 5V, it's working, but how can I do this?

And the most convenient way to connect a part, for which information is transmitted to the laptop? Є SATA adapter

Thinking about how to install and solder the eSATA input and connect it to the laptop, but I still need to figure out the power supply, how can you do that? Rivsya in the net, write what you can, write what you can’t. If it’s such a possibility, then how are you going to sleep? and chi є інші ways? Can you sketch a simple scheme?

Razgornuti

joyreactor.cc

Do-it-yourself sata usb adapter photo



Zovnishniy zhorsky you can build a disk with your own hands, vikoristovuyuchi SATA 2.5 or SATA 3.5 disks + special cable or old building for HDD.

Let me explain for those who don't know:

SATA 3.5 - these are the only hard disks that are installed on your computer.

SATA 2.5 is a replacement for a hard drive, found in laptops.

Whenever you get a simple USB-SATA cable in the store, whether it's a hard disk, you can twist it like a sound one, connecting it to any computer.

Descriptions in another way can be vindicated, for example, for revival of data, reverification of disks for reference, or vindicating like znimny zhorsky disk. The rest option is not known to be viable. So yak y I will build a new building there is a buti sche th garniy case.

Idemo to the store. We buy a case for a new hard drive and it is built into a new SATA 2.5.

For example, I added a case for 300 rubles, which allows you to work on USB 3.0 hard drives and inserting a hard disk from an old laptop with a capacity of 160 GB.

You can see miraculously in the pictures what was zreshtoy.

Oleksandr Borisov, m. Samara

Specially to the site.

At the deputy in available form vykladenі simple kroki adaptation for help pіdruchnyh zabіv USB-to-SATA converter to look, attached to vikoristannya.

Preamble

Once for some reason (until unexplained) the reason was by moving one of the on-board SATA nipples to a self-selected NAS on miniITX (the fault was the AoE server for diskless clients), and the oscillators on the right were in the evening (the same on the other day) ) then it imposed a deuce of exchange on the availability of the solution (if you want to sip, you can go to the grocery store, ale molt, like a vidomo, dvigun kmіtlivyh minds).

Again, the task is this: connect a SATA screw to a miniITX system without free SATA.

Part I

Shvidko provіvshi revision navkolokompyuternogo motlohu buv manifestations of such an adapter, scho richly rokіv fell with a saw without action, more zamovleniya buv at the dawn of the popularity of foreign online stores:

As it turned out, the board is not just a USB-to-SATA converter, but for attachments such as laptop DVD drives, which carry on board a part of the rose slimSATA(Adapted by an additional non-standard block of life). In this way, the adapter did not get far enough to connect to the original SATA-attachments and it was suddenly thrown into the dark corner of the box.

Also, the adapter is compatible with slimSATA sockets, which includes a standard SATA 7pin female socket (like on suitable cables):

To learn more about paying for the additional non-standard slimSATA life block, then inserting it into the HDD, the adapter blocks access to the HDD life socket (SATA 15pin). There is one - podovzhuvach SATA 7pin rose, for which one of the standard SATA cables is carefully seen:

Now you can try again with the slimSATA adapter board and solder the end of the SATA cable (do not mix up the RX - TX diff pairs!):

In order to improve the mechanical strength of the cable and the board, it was necessary to twist the PVC tape (as a cobular idea, fill it with silicone sealant, it was necessary to fill it with a silicone sealant - it’s not clear that there are a lot of “non-conductor” wines at 1.5 GHz):

Now let's deal with USB: if we need to replace the internal SATA, then a two-meter skein from USB-A to USB-B in the middle of the case will be ok. USB-B is allowed - you can pay with roses and electric batteries (the stink is needed more when living with a USB DVD drive).

Connect the adapter to the internal USB combo on the motherboard. Why is it possible to close / solder (for 480 Mbit / s - it’s better to solder) the contacts of the PLS-4 socket (preferably PLD-10, for the whole comb of the eye, but in the state of the presence only PLS-4):

Having looked at the pinning of the combs on the motherboard and the connectors of the USB microcircuit of the conversion SPIF225A, viroblyaemo folding:

At once, having spent a good hour on the search for the necessary pins, on the hand of the sporuzheniye of this kind of adapter, which allowed the HDD to be loaded without reloading, which collapsed, and as a result, the dimensions and the order of atavisms, completely harmonically fit into the interior p NASa:

Part II

After solving the problems with the NAS with that yoga upgrade, the squealing pulls to perfectionism went up to the modification of the adapter. Why were the necessary roses sealed: SATA 7pin male SMD&. We’ll change the landing area for the SATA-rose, we’ll work in such a rite, so that you open the gates of the pinch-trimachi didn’t pass the emergency signal path on the gate of the pay (as it seems - this time reconciled - one wind was drilled):

We clean the mid and solder the stitch-trimachi on the back of the payment:

Krok vysnovkіv landing place on the board and the SATA rosette is running, as a result, it is necessary to carefully solder the roses:

Let's take care of the USB part. It is possible to change the available space on the board for landing miniUSB-B:

We solder roses, showing virtuosity for an hour of work with a croc 0.65mm miniUSB-B socket:

Here you need an explanation, then, the sequence for miniUSB-B:

1. The GND contact, without having to close it neatly (the material is low crooked - at the first rose it broke off the bottom when bending) it goes uphill and soldered to the case - the case is then soldered to the GND board;
2. Visnovok ID is not vikoristovuєtsya - that yoga is simply vismikuєmo with tweezers from roses;
3. Now it has become a trifle in a more comfortable way - three visnovkas have been lost - they need to be carefully pierced with tweezers, so that there is more room for maneuvering with a soldering iron;
4. Before the installation of D- and Vbus, there are small conductors-podovzhuvachs, and you yourself enter the trochs, so that the stench is not spent on the board after the installation;
5. Visnovok D+ is redundant "like є" - physically, when mounting the wines, it is used on the airfield on the board;
6. Now you can mount the roses on the board - let's take the case diagonally, then carefully know it on D- and Vbus.

Practice is the criterion of truth, so the correctness of the day is verified by real inclusions:

Another version of the adapter came out much more aesthetically pleasing:

Little touch

All good. І functionality, і aesthetics, but not vistacha rodzinki. Read the documentation for USB-to-SATA SPIF225A, I knew and won: " pin 36 - HDD Activity LED output". Note:

Remove a 10K resistor (PullUp to choke the switch to the TriState-pin?) and solder a lanyard from the series connected R and LED. A resistor with a nominal value of hundreds of ohms (I took 1 kOhm), a light-emitting diode with a cathode on a 36-chip microcircuit (denoted by extension or documentation):

Podbag

On the butt of adapting the USB-to-SATA converter, it shows the way of the smart extension with a minimum of other materials (promptly updating the practicality of diskless-clients), as well as demonstrating the phid to a more thoughtful and elegant no other solution.

Intro.
Most Vlasniks of notebooks sooner or later confront the problem of lack of money. As a rule, laptops with a screen size of up to 15 inches cannot afford another slot for a 2.5 inch add-on. That's why the vlasniks are afraid to think about either replacing the laptop itself, or replacing the yoga hard drive. After replacing the hard drive, the old accumulator is forever abandoned, which can be easily converted to external USB accumulator for transferring data.
Naturally, you can add a mobile 2.5-inch hard drive and turn it into a modern storage device. Dobre vartist zovnіshnіh hoarding tse allow. For example, at the time of writing the article for a mobile hard drive with a capacity of 250 GB, ask for 40 dollars, and for an attachment with a volume of 500 GB with a WD, ask for a total of 45 dollars.
It depends on the type of hard drive.
For the sake of justice, let’s say that you can turn the most famous 3.5-inch hard drive into a modern hoarder - you just can’t call it mobile anymore. If you have a 2.5 or 3.5 inch hard drive, then in the first place you need to specify the type of your interface.
Today, the market uses the following types of interface: IDE (ATA) and various SATA options. As a rule, all SATA interfaces are summed back together, and we won’t be able to work on their variations. However, on the right side, between IDE and SATA interfaces, they are absolutely inseparable from each other and may differ in roses.

The picture is clickable

For the little one, for your respect, two hard drives with different interfaces are presented. Winchester may have a mobile format of 2.5 inches. Left hand drive with SATA interface, right hand drive with IDE interface.

The picture is clickable

We have a 250 GB hard drive in our hands western digital Scorpio Blue series with SATA interface laptops Acer And yet, yoga space was no longer available, and the replacements were made on a larger space of 500 GB solution.

The picture is clickable

Undaunted by the victoria on the trival, Winchester's robot did not call out whether they were narcissists, it was destined to victorious yogo like a famous mobile accumulator. For whom it was necessary to know for the new old case that we had created. Old AGESTAR case for 2.5-inch mobile hard drive.
At computer component stores, there are anonymous different cases for 2.5 inch hard drives. Key vіdminnіst polygaє in the offensive:
- material prepared for the hull,
- type of calling port (interface),
- Vartist.

As a rule, in stores there are different cases with USB interface 2.0, significantly less cases with eSATA interface, even fewer cases with USB 2.0 & eSATA interfaces. At the sale, a small case was revealed due to the current USB 3.0 interface, and yet the quality of the hard drive itself was overestimated, so we did not see the stench.

The key difference between USB 2.0 and eSATA interfaces is related to data transmission security. Using the USB 2.0 interface allows for maximum security, scaling and portability on all computers. A significant minus of the USB 2.0 interface is the low speed of data transfer, which will not allow you to open the new speed of your hard drive.

The eSATA port is promising, but there are few expansions and it is only used in expensive versions of motherboards, cases and laptops. The eSATA interface allows you to expand the potential SATA add-ons.

The material prepared can also be changed. In the simplest way, it's all plastic. The expensive variations have an aluminum case with a shkiryan bag in the kit.
The variety of different cases is also different. The found option costs 3 dollars for the coristuvachev, expensive versions cost over 100 dollars.

Get a 100 dollar case for a hard drive, which costs less than 40 dollars, if it's new and it's cheaper after a cob of exploitation, as a minimum, cost-effectively. That is why we were given a case for testing, which is worth a symbolic 3 dollars - AgeStar SUB2P1. Complete set and old look AgeStar SUB2P1.

The picture is clickable

I’ll add three dollars to my daily miracles, like in terms of equipment, like in terms of productivity. Attachment will be modestly packed in a package. I will attach the front wall to the attached cardboard with the refurbishment of the key characteristics of the annex. Tse pіdtrimka 2.5 inch mobile hard drives or solid-state storage devices with SATA interface, available with transmission interface Data USB 2.0 and other variants of zabarvlennya.
For the sake of justice, it should be noted that our post-commanders confirmed that they did not smell the black color of this case.

The picture is clickable

After opening the packaging, we were taken aback by the fact that in the kit there is a help for the operation of the Russian language.

The picture is clickable

The case is made of plastic. On the front wall there are paper stickers from the designated model, if it gets erased, we recommend that you see them from the surface of the annex.

The picture is clickable

The material for preparing the case is soft plastic of black color, which does not smell like anything, is uniform in structure.

The picture is clickable

I will attach the lids in two different sides, which will make it easier to remove that installed hard drive from the outer case.

The picture is clickable

Two sides of the outer case are fixed behind an additional plastic buckle, which is attached to the material of the case. Zavdyakov vіїmkam on the walls of the krishka are superficially fixed and bottling whether it be a flask from the motherland, otherwise I’ll build it under the wood, it’s unlikely to cause any problems.

The picture is clickable

Attachment of assignments for SATA hard drives, which have been repeatedly slandered. Use the middle soldered controllers from SATA ports for live and data transmission.

The picture is clickable

On the beater wall of soldering mini USB port for the transfer of data and the life of Winchester. There is no need for a supplementary port for the security of life, which can help to eliminate some problems for the coristuvachi. With a weak power supply, which underestimates the voltage along the 5 volt line, you often have problems starting the hard drive. As a rule, connecting the storage device directly to the port on the motherboard, and not on the case system unit, stosuvannya yakіsnogo USB cable let me forget about this problem.

The picture is clickable

The sellers of computer components often talk about the presence of a USB data cable in the kit, or they say it’s okay, but there’s no way. We don't want to sacrifice for our respect, but the mini-USB-USB cable, as a rule, is practical in our skin homeland and is often used with mobile phones. In our case, we successfully stopped the data cable, which was stale. mobile phone Nokia.

The picture is clickable

At the next stage, we installed the hard drive in the case. It's easy to be afraid to do it - with a light onslaught path. Naygolovnіshe, turn the hard drive forward correctly with the ports of life and data transmission SATA stashed in the case.

The picture is clickable

The presence of any elements to wash on the scheme of the hard drive controller allows you not to worry about the rear surface when transporting and even attaching.

The picture is clickable

Deyakі koristuvachі can harden what plastic case not ensure adequate heat dissipation from the Winchester. Zvichayno, zovnіshnі casey, vikonnі z aluminum, more efficiently cope with zim tasks. If you don’t forget that mobile hard drives may not be so high in energy, that you suffer from overheating and in laptops, as a rule, the stench doesn’t cool down in any way.

The picture is clickable

After the completion of the folding, I will build the stage of yogo testing and vikoristannya. The supply of voltage to the attachments is accompanied by a light-colored light of a light blue color, which also symbolizes the process of transferring data. It should be noted that not all the cob of work from the creation of an ovnіshnіm cumulative protіkatim smoothly. As if the Winchester was already victorious, it was formatted and it was created on a new one, - you will not have problems from the cob of work. Vin is assigned as a normal flash drive using the Plug&Play method. And the axis is quiet coristuvachiv, like a new hard drive was added without formatting it, there will be a problem, as it will be related to the disk letter in the "My computer" tab.
For which you need to create a distribution on the hard drive and format. Is it possible to work through different exciting discs And better not to fool around and work in the Windows operating system itself.

The picture is clickable

For this, you need to go to the "Control Panel" through the "Start" section, then go to the "Administration" section. At given to this select "Keruvannya by computer", de at the tab "Keruvannya by disks" you can recognize and format the connections of the existing storage device. After the creation of the partitions, you will have access to them through the "My Computer" tab and you can change the exchange from the storage device, as from the great hard drive. Test configuration.
The choice of the old accumulative test was carried out like on a desktop computer, on the basis of a daily CPU Core i7 and not less than the daily mother's payment, so on the laptop Acer Aspire 7730 for fixing the Core 2 Duo processor. The following is the value of productivity per two other systems appearing equally equal.

1. The speed of reading data was tested with HD Tach 3.0.4.0

The picture is clickable

It is worth noting that our current accumulative choice shows a lot more productivity, less protests than the old WD My Passport Essential hard drive. The maximum transmission speed was 34.3 Mb / s, and the average delay was close to 17.9 ms.

2. Speed ​​of data reading in HD Tune 4.5.

The picture is clickable

In another synthetic test, we took away similar data from the front, which also turned out to be the best, lower official hard drive WD My Passport Essential.

3. Recording speed of 64 MB files HD Tune 4.5.

The picture is clickable

Something worthwhile is closer to the practice of testing by way of recording files in a size of 64 MB. We took away the results from this test, as they were also less able to use the USB 2.0 interface.
Well, I would like to note that during the long test the temperature of the hard drive did not exceed 35 degrees Celsius, just like a similar hard drive in the laptop, the temperature was close to 43 degrees. Therefore, we will take care of the robotic hard drive in this case from the side of the coristuvach.

4. Speed ​​of the operating room Windows systems 7.

Under an hour of practical testing for swidk_styu zavantazhennya image operating system Windows 7 we took similar results for other modern storage devices with USB 2.0 interface.

5. Evaluation of the productivity of a hoarder in Windows environments 7.

We have tested the productivity of our chosen storage device using the Windows 7 operating system. command line it is necessary to call the command: "winsat disk drive g -ran -write -count 10", de "g" is the drive letter that is being tested in the system.

From the results of the test, it is clear that our choice of accumulators has taken off a richer higher rating, lower than the factory solution of WD My Passport Essential. Visnovok.
Behind the materials of this article, it is clear that any mobile hard drive can be turned into a garniy old accumulator without any trouble. Specially for testing, we were asked to give us the 3 dollar case that we found. Three dollars allow you to take a wonderful old accumulator from your mobile hard drive, even if you want to save money. It doesn’t seem like it’s about those that such an old case is easier to renovate these “dead” laptops with a hard drive.

Regardless of those who criticize the products of the AgeStar company for their low quality, for the richness of their victories, I have no more positive animosity about them. Nasampered, for democratic art. Shlyub zustrіchaєtsya at all virobnikіv, let AgeStar have this ostentatious thing for the most, lower at Thermaltake. But in the rest there is no analogue to the presented old case for three dollars and with a guarantee of 6 months. AgeStar products optimal support productivity/price.

Virobnitstvo hard disks do not stand at home. Technologies are actively developing: the speed of recording and reading is growing, the terms of exploitation are increasing, new standards and form factors are being introduced, through which a lot of old outbuildings become insane with modern computers. With the help of IDE SATA adapters, you can convert an old machine to work with new storage devices.

V_dminnosti SATA and IDE

IDE (ATA) - a parallel interface for connecting storage devices or optical drives to the motherboard. Old standard from the 1990s. IDE technology vicorous roses 40 pins for connection to the motherboard and okremo 4 pins of life. In this hour of class, scho mayzhe viyshov іz vzhivannya. The culprit is old technology, which is still being used for unreasonable reasons.

SATA - the last interface for the exchange of information. At once zastosovuєtsya at all new annexes. I have a low advantage over the old system.

Main advantages of SATA:

• high speed of reading/recording information;
• zbіlsheniy obsyag bezposeredno nakopichuvacha;
• Possibility to connect extensions without restarting the system.

It is also the latest version - eSATA. The same SATA, but guarantees stable contact for a long time of work. Zastosovuetsya for old HDD.

Newly needed adapter?

There are a few problems, so you can find out if you need to get an IDE SATA adapter. For example, at home there is an old hard drive with an IDE interface of 80 GB, and you suddenly needed to "take" a new photo. Connect yoga to a new computer with SATA sockets not visible.

1. On the computer, the volume of memory suddenly became unusable, and an IDE hard disk of the required volume appeared under the hand, which, at first glance, was marijuana.
2. The situation can be a turnaround: without an upgrade on the IDE interfaces, you want to take more additional memory or restore files.

All situations have one solution - switch SATA / IDE or IDE SATA adapter. You can convert the flow of data from one system to another, thus erasing between different standards. Folding capacity - no more than a smaller adapter for microSD cards.

How to choose?

We are assigned to the varto, what kind of adapter is needed. Є tsilih five options:

• IDE/SATA.
• SATA/IDE.
• IDE USB.
• SATA USB.
• IDE SATA USB.

The first two items are suitable for indoor installation. The stench will be corny, like one or a few hard disks, or SSDs of different standards, you want to put it in the computer case. Sound, these adapters are not damaged by the case and are not protected in any way. They look like a fixed fee, de іntuїtivno zrazumilo - where do you plug it.

Important parameter adapter from IDE to SATA for readability and transmission of information. Viapad with USB adapter, either 2.0 or 3.0 version. The rest allows you to operate more information, but it is also important for the version of the computer ports, as well as the capabilities of the hard drive itself.

IDE SATA with USB output

Cream adapters between IDE SATA standards, on the shelves you can use IDE SATA USB adapters. The Danish device allows you to connect any kind of hard disks directly to the USB port regardless of the standards. So, it is allowed to victorious like a great flash drive. This price is important for laptops or tablets.

Zustrichayutsya like a universal (SATA IDE adapter on one board, plugged into a number of noses in one phone different type), and other (SATA and IDE versions) adapters. Choose to deposit according to specific needs and prices. An important parameter for the selection will be the presence of a built-in or supplemental life block. Without a new adapter, it will cost a little less, but it will appear less functional. It's possible to use the central block of the computer's life, but don't start it manually, before you happen to twist the cover.

life

Drives of the IDE series are available in a standard Molex rosette with 12v and 5v braces. Vіn є on all blocks of living.

SATA drives allow connection for 12v, 5v and 3.3v boards. For whom you can know the best 15-pin SATA IDE adapter for Molex rosette. The problem is that the standard Molex does not have a 3.3v power supply, which means that powering the block is not possible. This particularity was insured by the vibrators of discs, the singing world of the virishena.

Connections through the accumulator from the live adapter Molex / Sata, will be adequately applied on all machines, but not on all, it is possible to support the hot connection technology (for example, the connection to the system for an hour of work). On most of the current blocks of life, there are a lot of windows - SATA roses, which are not available before Molex and include 3.3v. So chi іnakshe, but for robots such as SATA devices do not change the voltage 3.3v.

Transitioner chi new hoarder?

There is no unequivocal evidence on the food chain. All fall in your likeness to the budget. Ninі tsіni for memory have greatly decreased, but all the same do not calm down at deyaky moments. Possibly, rational decisions would be to add a new storage docking station, so that you can easily connect multiple discs of various formats following the principle of a flash drive.

It's safe to say that buying a new hard drive may entail an upgrade of the system's system, just like installing an adapter doesn't need anything.

Zrobi himself

Most of the brown electronic devices can be purchased for a dollar bill with your own hands, without special knowledge of electronics, but the IDE SATA adapter is unlikely to fit into the category of attachments, which are easy to install. Zreshtoy, shvidshe for everything, will be stained for more than an hour that cost, less at the time of purchase of a ready-made adapter, wanting to easily know the impersonal working schemes on the Internet. And the axis "technomonsters" can also get to the soul.

A hard disk like a Winchester is an invisible part of a computer.

Also, wine is one of the most expensive components, so the wrong choice, the connection of that victorious machine can lead to the exit from the fret like the hard drive itself, and the computer. But it’s also unbelievably expensive.
So that didn’t happen, at this article, the main ways of connecting hard disks to a PC are considered.

See roses for connecting winchesters

Otzhe, the main roses for the transfer of data between motherboardі hard drive- not SATA and IDE.
IDE is an old version of connectors.

Ninі stink is practically not zastosovuetsya. As soon as you choose a PC with installed components, you can add a disk with such a socket. Cost of vin can be a troch cheaper for SATA. Also, old mothers can pay less for mothers with IDE. For such a time, a second disk is needed.
Sometimes, obviously, you can add different adapters, but there are more heads and additional windshields, and sometimes the work of the owner is incorrect.
SATA roznimannya is more modern and more capable of more data transmission speed, less IDE. Won can reach 3 GB per second.

The SATA data cable may look like this.

Cord of small width. Raznimannya are formed from the minimum number of contacts. Roz'єm maє g-podіbnu form, connected to Winchester. Direct - to the mother's pay. Outside the sound is accompanied by loud clatter.

To pull the cord, it is necessary to press on the metal cord on the roses and gently pull it. Not varto when you see the report of the great Zusill, the shards can be made by the very nest from the mother's pay. It is necessary to perekonatisya, that the blotch was more pronounced.
IDE cord may be a wide cable and large number contacts.

To turn off the pardon for roses, there is a bichny viriz.

Most often, cords can be used to make sprats of roses. One for the motherboard and two for IDE add-ons - two hard drives or a hard drive and a CD/DVD drive.

When it comes to motherboards, then stinks can mother:
1. Only IDE;
2. IDE and SATA;
3. Only SATA.
Stay stuck in today's top motherboards. With such a fee, there is no sense to buy a disk with an IDE for rent, to get some wines that are relatively cheap.

Winchester life cord lock

It doesn't matter to figure out what kind of life in these two types of disks differ.
For an IDE, you can use this form

Contacts chotiri, and stench to exhaust.
For SATA - a wide socket with a turn on the edge.

It is practically impossible to tie the cord incorrectly at this turn.
It’s too rich to lie in the block of life at this moment. The early ones may not be the mother of roses for SATA attachments. Ale is not a problem. Here, a special adapter will come to help. Variety of Yogo Kopiychan.

Modern living blocks can be used for SATA cords.
Everything is necessary for the mother on the safe side when the PC is folded, so that there are no problems with the inconsistency and after the staining of the pennies on the different adapters.

Installing a hard disk

We select the "police" in the case, where to install the hard drive. If the installation is too low, it will not ensure sufficient good heat transfer from the lower part of the disc. Overheating is not allowed.
Too high installation can be difficult through the slats operational memory that other possession. All lie in the features of the mother's payment and roses on it.

Uniquely static electricity, building to lead not only a hard drive, but also other PC components. For whom to know from oneself synthetics and natural speech. Also, before skin manipulation, a grounded object is bumped - either a battery or a water tap. So you can take static.
Gently insert the disk with the open part down, and try to open it on the case with the carvings on the hard drive. If everything runs, we spin the gvinti.

It's more important that the gvinti be too early, otherwise you can screw up the disk. Call to recommend a 3 mm dozhini screw.
Be careful with the hard drive. Zayva shaking, hitting, falling, too, can harm dear attachment.
If the screw is tucked in and the winchester is firmly fixed at the case, a train is attached. Back to the mother's pay, then the hard drive.
Z'єdnannya SATA roz'єmіv.