How to reflash a router - a cover instruction. Firmware for a mobile modem pid usi simki Chi can be flashed mts router

Today I want to see you a new instruction on how to flash the Asus router (firmware restoration). Ale before tsim hotiv bi bald on one fact. If you get a new attachment out of the box, you don’t need to think about what the rest of the official software will cost. It’s impossible to see if your mind was blown off and spent an hour lying in a warehouse. And in an hour, additional services and capabilities could appear, even if your Asus firmware itself does not support it.

Official firmware Asus WRT

Ale before her, imovirno, already there was an update, having taken it in, having installed it, you can speed up with these services. For example, the situation often traps if the router does not support 3G modems, although it may have a USB port.

In the article, I will figure out how to update the firmware of the Asus router on the butt model RT-N14U from the official site with the correct version of the browser. Ale tsya іnstruktsіya pіdіyde for the entire model range - RT-N10, RT-N16, RT-N11P, RT-G32, RT-N12 VP, WL-520GU, WL-520GC, RT-N10P, RT-AC66U and others.

Preparing for firmware update - revision version

It is clear from the fact that the model may be the mother of the version of the viconnannya, or, as they are called, the revision. So buvaє, її doopratsyuvali that put іnshe zalizo. Apparently, and the version of the software is also slightly different. If you put the firmware on the router with someone else's revision, the firmware may stop functioning.

How can I find out about the revision of my attachment? Nasampered, it is indicated on the sticker on the case. Look respectfully - there may be an indication of the number of that version.

• F / W - the firmware of the router
• H/W - Asus model revision

If you want to update the Asus firmware from the official website through the router's admin web interface in automatic mode, you don't need this information.

Software security is the best option for you. Ale, I’ll rob it manually, or I’ll tweak the firmware for Asus from a third-party retailer. So tezh є, stinks are released by programmers-enthusiasts and often more possibilities. І for your mind їх installation of obov'yazkovo it is also necessary to secure the revision number. If it was issued for your model, but with another revision, then it is not practical.

Instructions for updating Asus firmware

Let's go from word to word. Distributed updates on Asus routers in English, it can be called Firmware, as you do not have a Russian interface.

The sequence is like this:

1. Recognize your version of the revision from the sticker
2. Stock up on the fall, as if it were not so, and її you could be reminiscent
3. Upload a file with new software for the router
4. Connect router via cable
5. Import firmware through the web interface of the router's admin panel
6. Check while the router is refreshing and restarting

How to download the firmware for the Asus router from the official site?

Let's get started. We go to the admin panel at the address http://192.168.1.1, for the default login and password - admin, the stink is also indicated on this back label

On the panel where the Asus router is located at the upper part of the interface, there is information about the flow of software. There is a version of the firmware in the active message.

Click on it and use it in the update section. You can enter here by opening the “Update firmware” tab in the “Administration” menu.

Give respect to the button "Change". With help, you can find out about the presence of a new version in automatic mode.
So here is a message, like a lead to the company's website. Behind him, you can know all the information on the router, but I'm not talking about the English version. So hurry up to my messages on the Russian version of the Asus support site.

We go to the site and enter the model of your Asus router in the form - I have RT-N14U. Once again, there is a suggestion with models that were released in different rocks under the same number or similar to the new one - let's move on to our own strength.

On the side of the description of the router, select the item "Pidtrimka" in the menu

І go to the "Drivers and Utilities - BIOS&Firmware" section. Here we wonder, like the last version of the firmware for your revision. I only have one, so I can safely transfer the file to my computer.

As a rule, when packing in archives, it is necessary to call ahead of it. For whom you click on the archives, which is saved on the computer, with the right mouse button, select “Vityagnut all”. I gave in the offensive vikni znov "Vityagnut".

For Asus, this file can be called type RT-N14U_3.0.0.4_380_4057-g0643d8e.trx»

Asus wifi router firmware

Before that, reflash the Asus router, connect it to the computer via a cable (patchcord). Otherwise, when updating, the wifi signal may be interrupted, the connection with the computer will be interrupted, and the update will not be completed. Tse can lead to critical pardons at the robot and I will attach.

Now turn to the admin panel.

1. Select the "Choose file" button to unpack the firmware file with the TRX extension.
2. Tisnemo on the button "Edit"
3. I check, the docks are all completed.

And after the end - enjoy the new interface with the capabilities of your router!

Alternative firmware for Asus routers

• Firmware "from Oleg" - the most popular and most popular unofficial firmware. Updates for routers based on Broadcom chipset: RT-N10U, RT-N12 C1, RT-N15U, RT-N16, WL-500Gp, WL-500GpV2, WL-520GU/GC
• Wive-NG-RTNL - increase throughput indicators and increase new capacity for routers based on the Ralink 3050/3052 chipset: RT-G32 C1, RT-N10 C1, RT-13U B1
• DD-WRT - rozroblenі whole team fakhіvtsіv firmware for different models of different companies
• Padavan FirmWare - firmware for routers RT-N11P, RT-N14U, RT-N56U and RT-N65U
• Open WRT - also faceless routers. New remodeling of models
• Vampik is another bad old technology for the most popular Asus models and D-Link. Є additional firmware "from Oleg", constantly updated
• Tomato is a Polish rozrobka. Supports a wide variety of Asus routers, only English and Polish interfaces
• Tomato USB - improved version of the previous firmware for additional USB modems. Support more router models – Linksys, Asus, Buffalo, ZTE

Well, as a rule, I will help you with instructions in the FAQ on the Asus support site.

Video from Asus router firmware

Do you win the MTS modem, or do you need to insert it into a new SIM card of another operator? Then unblock yoga, and we will show you how to work.

Navigation

For some people, adding a 3G modem from the MTS company is the only correct solution to take access to high-speed and inexpensive Internet. Varto say that this operator has control over the security of access.

When buying a modem, we also take a SIM card and install it on it with a tariff. Basically, the MTS connection wins. After inserting the SIM card into the modem, the Internet will be more efficient.

In the future, you will only have to pay for your rent at the same time, and you will have the Internet with free access.

Ale, let's notice for a second that our company is propagating a smart mind for the common cause. Abo just shvidkіst z'єdnannya in your district vishcha.

How to unlock the MTS modem? At this time, you can insert another SIM card into the modem. Ale, the axis is not set, when it is turned on, ask for the same code - it means that the exchange is installed and you can only win the MTS SIM card.

How to unlock the modem?

To create such an operation, you need to use special programs.

The main company wins two models - Huawei and ZTE. The principle of stink is practically the same. Zreshtoy, be it any of them is guilty of starting to accept the sims of other operators.

Unblocking Huawei

The most simple method is to install a universal firmware. It's not just to change the modem's firmware, but to replace the MTS company's software security at the universal.

Moreover, all parameters can be entered here. If there are none of these, then there is nothing terrible - to create one independently, vikoristovuyuchi such data:

• My profile - you can be good, or better yet, indicate a new operator
• Dialing number for all operators * 99 #
• Login - mts, beeline, and for Tele2 and Megafon nothing is required
• The password is valid mts, beeline, and for Tele2 and Megafon it also does not require anything
• Access point - internet.mts.ru, internet.beeline.ru, for Megafon it's just internet, and for Tele2 - internet.tele2.ru

Like bachite, nothing folding.

If you don’t want to be tormented by the firmware (before the speech, if you didn’t get far, then the modem can be put in the wind for a smart phone), then you can use online calculators to calculate the unlock code.

Besides, on the Internet you can find a special program for calculating this code. Before speech, the calculation is based on the IMEI number attached. It is necessary to enter into the program either a calculator, get it, while the program calculates the code and enter it into the modem.

It is not necessary to try to enter vipadkovі digits, the shards are blocked after 10 recent samples, after which it happens to reset the lichnik to zero. How scary you are to win the software yourself, to turn to professional help.

Unblocking ZTE

For this modem, the DC-Unlocker program is a miracle for you, as it specializes in unlocking modems of this brand.

You will know other brandies at the locals. If you press on the brand of your own add-on, then immediately start the unlocking procedure - and then the program will work itself out.

And other ways to unlock, for example, online services. But if you doubt yourself in your own strength, rather trust the unlocking to professionals.

Video: Unblocking Huawei E3531 (MTS423S) modem with code

First of all, we wonder what kind of Wi-Fi 3G router took off, and what is the best solution for “modems”. In principle, from one side there is a modem that works on 3G, for which you can access the Internet yourself. On the other side of the Internet - not to one coristuvachev, but to a dekilkom in a row (one hour), for which Wi-Fi is victorious. The standard characteristics of ZTE MF30, how to finish a modern machine, will be as follows:

• 3G (UMTS)/HSPA: Yes,
• EDGE: є,
• : є,
• Synchronization socket: miniUSB on the case,
• Data reception/data transfer rate: 7.2 Mb/5.7 Mb/s,
• autonomous robot - 5 years,
• Merezha Wi-Fi: support up to 5 coristuvachiv.

Zagalom, a small taka, a neat little box, yak at once (without flashing) - it’s more than a SIM card from MTS. To fix that configuration, I'll add it, you need to connect it to any working computer via USB.

Nalashtuvannya

Here the company itself (tobto MTS) tried to make everything as simple as possible. It is possible to “sew” the necessary software (installed on a PC) into the attachment itself for the account. And regardless of those who are so shy, MTS can fix the router. – rise to a minimum. It’s good, nalashtuvannya “pіd MTS”. You can often connect the router and your computer with a USB cable (which is included).

After a couple of seconds, after the operating system is turned on, it will automatically show “new possession” - about which you can see the tray icon at the bottom:

І it will automatically start the program "Install":

Let's wait for the installation. One program will be installed - Connect manager, with an icon on the desktop. After that, install additional drivers for the system (for a new one, I will add a modem).

In principle, the "installation" of the programs for which is completed.

Launch the program. After the launch, bachimo vikno:

Tse tab "Connect". Press "Pidklyuchiti".

If everything is correct, and the level of the signal in your area is sufficient, after approximately the plume you will be connected (about the top right, check the icon). Vitaemo, now you can speed up with this add-on (like a 3G USB modem).

However, we are lacking something. We want more Wi-Fi. Well, tse - it doesn’t matter in the “device” from MTS, the installation of a Wi-Fi router viroblyayutsya z ієї programs. Click on the "Adjustment" tab:

I all. Idemo to the "Router" tab.

Here we can come up with a name for ourselves (SSID). Dodatkovo, if you want, you can set the password for the WLAN measure (by pressing “Security”):

Briefly - nalashtuvannya bezpeki bezdrotovyh merezh. If the "authentication type" is selected as "Open" - a single change for the choice of your measure will be called the measure (it is also necessary to guess). For a stronger attack, select the type of authentication (alternatively, the same as on a mobile device that is victorious, most often - a variant of 802.11), and an encryption mode (for example, WPA-PSK). Such a regime itself can be “installed” on all mobile outbuildings, which are victorious in this area. You can choose authentication, but without encryption mode.

The Wi-Fi fence is completed, and (small router switches) - ready to win. Statistics - displayed on the "Connect" tab.

When the program is completed, it is necessary to press “Wipe” (to open a connection with a 3G network).

About the "autonomous" robotic mode

The USB cable can be removed by plugging the attachment in front of it programmatically (as it was done with a USB flash drive). What to write in the instructions:

Click on the double icon "arrow" on the task panel; z'appear "I'll build it safely." Selecting the “ZTE USB Mass Storage” item, follow the prompts to unplug the USB modem. Now, the attachment is responsible for continuing the robot (already like a regular Wi-Fi router).

The password for entering the rootless mesh - we wrote off from the router case on the cob. The router can be broken for an hour: there is a hardware button on the side. Other - enable/disable encryption mode.

And how can a router keruvate through a mesh (do not connect a "device" to USB)? It appears, it is possible. The "Connect Manager" program is not available to anyone.

Here we win, as if it doesn’t matter, the web interface. For all computers Wi-Fi networks, smart router, web interface available at http://192.168.0.1.

Zayshovshi on tsei IP, bachimo such a picture. You can go here with any browser. Login and password, password protection: admin and admin.

A detailed description of the work at the web interface can be found in the PDF file on mts.ru. And looking at the wine - something like this:

For robots with 3G MTS, the installation of a router is already posted here.

About firmware

We don't know what really MTS went for such a short. On rich forums, it is confirmed that the firmware version of this router, as if blocking on the new one, is not abyss, but the remaining version of the “code” is MTS.

With firmware, what to go for locking:

• can be used in 3G measure of one operator (MTS)

• to win a SIM card - you can only "rіdnu" (otherwise - from the same, from MTS)

• if you try, put your card (of other operators) - you can use it only “locally”, without going to the Internet (the subscription fee for the “local” measure is not known by itself)

With the new firmware, as they zapevnyayut us, we will no longer revise the “correctness” of the MTS card. Before that, after upgrading the MTS universal router, after uploading a new firmware, there is nothing to check for a new (unflashed) router. What? Warto twist ...

We direct two html-addresses of the “charitable” firmware:

http://depositfiles.com/files/u0ziso348

http://turbobit.net/vpon16f0ivo4/mf_30_update.zip.html

If you know on your own - you will know, at least, a sprat (possibly, with these files themselves). On mts.ru shukati - marno.

All files are recorded in one zip-archive, approximately 70 Mb in size. The archive contains not only the "image" of the firmware, but also the program (one .exe file). About every kind of change - a screenshot of it:

The sequence dіy will be like this:

1. Connect the 3G router MF30 for the help of the USB cable of the computer. Check the readiness of the router,
2. Close all programs, like cheating the router in this mode (especially "Connect Manager"),
3. Run the program that has been viewed from the archive (with administrator rights!). Everything was set up correctly - then, after 10 seconds, the program will appear at the window.
4. Now - embossed on the "Enterprise" button. Tse i means the start of the firmware process. What trivaє hvilin 10-15. And sob “on the way out” is not another “corpse” device, it is being protected:
   • Vimicati computer pid hour of firmware
   • Wimikati router vvid USB
   • Curve the "cross" the update program
5. Upon completion, it may appear that the attachment has been successfully stitched. The firmware program can be closed,
6. Looked like a router from a computer, we could see the Connect Manager program again (which didn't break).

All. The router does not look like new in any way (and get it ready until later). Pіd MTS nalashtuvannya router - be like that yourself (like i for a new one). Now attachments can be used in other mobile networks (intermediaries of other operators), and also with other SIM-cards.

Simply, MF-30 (router from MTS), back to back cim axis (Huawei ZTE MF-30):

Yake, for his part, freely worked with any protocol (UMTS, HSPA and EDGE), from SIM-which any operators. Obviously, the MTS company has (or else) cool programs, it was so good to link the program from Huawei to their "black" SIM cards.

In addition, the MTS kit has a sim card, which does not work anymore (navigate with a stylish phone) - you need a more familiar router. After a “flashing” of some sort, it can also be victorious. Only food - but now it’s “flashing” at the top of my head. Decision - on the choice of a vlasnik.

How far. Outstanding antennas, like the "serious" Wi-Fi attachments, the MF-30 did not have. What is not a problem for a 70-meter link (near the corridor of the concrete bud). An hour to fully charge the battery. Cho - scorched, bad. Іnsha rich - naskіlki "Swedish" Internet. If you want to lay down more from the provider, I’ll build it lower. To put it simply, the capabilities of providers are “approaching” to the maximum capabilities of the 3G standard, implemented by the “device”.

The installation of a new firmware (or - a flashing) can be as updated as it is already known, that I go to the annex "for locking", so I change the software on the new software. Another option (installation of an "alternative" firmware) is to bind with a rizik.

The first step is to “flash” the router of the first model, you are guilty of the nobility, as the “emergency update” is fixed. What can be added, that the installation of an “alternative” version of the firmware in any case will help the warranty. Think about two things, what you need, for a specific skin type - you can use your own arguments.

What do you need?

For hardware security, for flashing - three elements are required:

1. vlasne, router
2. patch cord (included)
3. computer with mesh card

If so, on the computer, you may be the OS (it's not important), but more importantly, the files must be recorded. These are the firmware files (and new, and tієї, as it will be flashed at the time of “renewal”). For the skin model, I will add “factory” firmware on the website of the maker. For example: ftp://ftp.dlink.ru.

Note: Selecting the firmware, enter the revision number (for example, "A1"). Models of different revisions are not summed, when firmware of other revisions is installed, there is a chance to take “not the same” ones.

Also, respectfully: alternative firmware for routers can mother the file format, which is not accepted by the extension, like “firmware”. Sound the files with a .bin extension, but also a copy of the "firm" ones (like fwz for the rest of D-Link, or .trx ASUS). Like a router with a special firmware - you don’t want to “batch” the firmware with the necessary extensions, beat the “intermediate”. So fight, for example, to install the firmware "Beeline" (.fwz) on dir-300.

Before that, how to reflash the router to an alternative one, it is necessary to reconsider the validity of the firmware, which should be checked for renewal.

Dії

Connect a PC to the router port (LAN1-LAN4) for an additional patch cord. Reactivate the router, if it gets busy (after 2-3 hvilin) ​​- press reset (5-6 seconds). Tsim wi will throw off the settings at the “pochatkovі”.

Now, for about a few minutes, you go to the web interface. Find the tab "System" -> "Update":

Or, maybe - "Administration" -> "Upgrade" (option - vouch for updating the firmware, you can find it in the instructions).

It's pushing back Look around, we know we need a firmware file. Then you can press "Onoviti". The firmware needs to be updated.

Once completed, then if the flashing of the router will be vikonan (indicator until the end), live - do not turn it on. Do not try to throw the router out of the blue (using the reset button). Better check 5 khvilin, then throw it off.

How everything went, how to lie down, then - vtaєmo, now you have a router with a new firmware. Those, how to change the firmware on the router, do not fold. More importantly.

Before Tim, as you press "Onoviti" (or "Upgrade"), you can have a booty in front of you:

• -IP-addresses of the "new" firmware;
• -її login (for locking);
• -i, password.

If you want to "don't know" if you want to be alone, you won't be able to enter the web-interface. Reinforce the "old woman", with which "emergency inspirations" happen. So, best of all, find out if you are ahead of the curve.

After pushing reset, the router will be reset. Bazhano vikonati rezavantazhennya computer'yutera (otherwise, in the command line, write: ipconfig / renew). You will enter the new web-interface.

Like a web-interface - does not show up

The main signs that stand for what is attached to reference (i - pracyuє), tse:

• -light bulb "power" - steady on (green);
• -light bulb "status" - blimaє (burn steadily - zbіy);
• -indicator to the LAN port, before which PC connection is also active.

If only one of the minds is not vikonana - the firmware is faulty (otherwise - attachments). However, it is not easy to enter the "new" web-interface on the right side of the building. How to update the firmware on the router, we took a look, but forgot to fix another component - a PC card.

Let's start with the "power connection":

Select the "static" IP mode, fill in the fields:

Tisnemo OK. The butt is aimed for the IP "192.168.1.1": we replaced the remaining digit in the first row (it is necessary - this is how it is). Mask pіdmerezhі, can be but with the rest "zero".

After pressing "OK" - everything is done. Open the command line, try pinging (we write ping “IP addresses of the router”):

Might be better. Well, well, nі (“moving the interval”) - we don’t fall into the vіdchay, but again we go to the establishment of the “Powers” ​​of the border. With great wisdom, you just won the wrong IP.

Knowing the information about the IP-address, and being sure that it is correct, will guarantee 90% success (10% solution - we'll write it off for a filthy cable, the weather is different).

TFTP

The procedure for flashing TFTP, so "from the console", is considered by the fact that this method is victorious, including in "emergency recovery".

Before that, how to flash a wifi router from the console, it will be checked if it is flashed from the web interface (enabled, disabled). Z'ednannya - less than a patch cord.

We need a successful "ping" of the router. Do not go out - wonder, as if they were robbed at the front division. It is necessary to select an IP address that is relevant for the firmware installed at the current moment.

For the visibility of the router, you can change the distance. Verify that Windows has TFTP enabled:

How to fight at the "Programs", at the "Control Panel". Guilty buti like this:

There are no "ticks" - install, press "OK". Left at the "command line" to write:

tftp -i "router addresses" put "path to file".

The firmware file will be transferred to the router in seconds. Ale - you need 2-3 checks, if it's "recorded", then - every hour after that you can reset the router. Vlasne, recommendations - you yourself, with flashing via web-interface.

Before that, how to install the firmware on the router, you are guilty of the nobility, how to fix the "emergency update", making a copy of the "firmware" firmware (if you want one).

Some pardons can be seen: turning on the firewall / antivirus, a robot without the rights of an “administrator”. Ideally, it is the fault of the ability to secure (for an hour of firmware) eating from DBZH. First "skidannya" with a new firmware, zam_st reset, you can turn on the power supply of the router for 30 seconds.

Asus RTN16 Router Firmware

If you ever tried to insert a card of another operator into the modem from the MTS, you could remember that you stopped catching the signal. Such a prerogative is left to the operator, whose modem you have attached, the prote samі rozrobniks will attach the possibility of vikoristannya yogo s be-yakim nerezhy. For which you need to go through the modem unlocking procedure. Then you can win your MTS modem with any kind of cards and accept high-speed internet.

How to flash MTS Huawei modem

• If you know your modem model exactly, you can flash it using the original cover of the retailer. Just enter the brand number from the box, I will add it to the search request and choose the site that suits you.

With more options, after installing the original firmware, the modem is automatically charged by mobile phone operators. However, if you messed up in the firmware incorrectly, you will need to manually enter all the parameters.

• At the vіknі firmware vkazhіt whether it's im'ya profile for the ruling court.
• Enter the dial-in number *99# for all popular operators, such as: Beeline, Megafon, Tele2 and MTS.
• The login must be entered exactly up to the name of the operator, as you can name it. So, for Beeline, the login will be beeline, for MTS - mts, and for Megafon, leave the field empty.
• The password is set the same way as the login.
• MTS access point: www.mts.ru; Beeline: internet.beeline.ru; to solve the operator in the empty field.

Save your profile with the firmware and use the Internet with the MTS modem on any operators.
To pay attention, that a number of recent launches on the modem with third-party firmware are surrounded. If you can't run it ten times, your modem will lock up and stop working. That is why you could not reflash the modem once - turn over all the settings, correct the pardons and start it again. If the modem does not start up, go to another cut, do not risk your attachment.

How to flash an MTS modem for additional software

To this method, all modems by ZTE firms can be seen, as well as vices, if you do not know which brand the modem is.
For example, I will use the DC utility - Unlocker. You can choose any other utility, as long as you know analogues.

• Go to the official website of the retailer or an official resource, click on the "Download" tab.

• To look through the list of available models, click on the orange “Download” button.

• If you have succumbed to the list of yours - go to the download in the mountain side.

• Press the button with the same name.

• Add the file “dc-unlocker2.exe” to the saved archive.

• Select your choice for MTS modem from the first contributor: Huawei or ZTE.

• Put a stamp on the other depositor, however, to prevent the retailer from leaving Avtovibir in this row.

• Now you can insert the MTS modem into your computer or laptop. Wait until port numbers are automatically displayed in the Ports section, then press the “Unlock” button on the right.

After a few seconds, a notification about the successful completion of the procedure will appear on the screen. Insert a sim card of any operator into the modem and use the Swedish Internet.