Yak to clean DVD. Cleaning methods for laser drives and disks

• Yak clear laptop dvd

If I want a DVD, I can still see it, it’s not the least, it stinks on many computers and laptops. At the bagatokh є license Windows system, Yaka save on a disc, and for installation you need a DVD drive (if you want you can burn it to a USB flash drive and get it installed). That is why I want to look at the statistics, as you can yourself, with the help of awkward tools, clean the DVD drive in your computer or laptop.

By a method like the descriptions below, I am trying to prove myself even more effective.

The reason for the fact that the DVD turned out to be nasty is not to read the discs because of interruptions, most often - to use the saw on the laser line. The axis її mi і will be cleaned.

Necessary tools:

• Vikrutka Philips (chrest);
• Zvychayna scrap (її requires rozіgnuti);
• A cotton swab or a stick.

Yak clean DVD computer drive

For a cob of vityagaєmo DVD drive from a computer. A laptop is not required.

Turned upside down і vikruchuєmo 4 screws for fastening the crush.

Even more accurately known kryshku and vіdkladaєmo. Our uvazi board with electronic components.

Now we put it like this, so it wondered at the front panel on us. Our unscrewed scrap is inserted into a small opening, designed for an emergency opening of the tray to the drive. Quietly embossed on the scrapbook until quietly, if you leave the trocha tray, you will not see your own mission.

Vitiaguєmo I will hand the tray to about half of the last dose. Now I know the plastic panel. For the whole, it is possible to draw a wicker on a small amount of suction.

Now it is turned upside down by the Krishka downwards and neatly to see it.

Now you can hit the very laser lens you need to clean. Respectfully її look. Shvidshe for all you know on nіy drіbnі hairs or drank.

Do not brush your hands. You may be overwhelmed with fat separation, as you will be able to put it down smoothly.

I take a wadded stick and with light rucks zmakhuєmo zabrudnennya z linzi. It is not necessary to polish the linse, just clean up the drink and hair.

For such a cleaning procedure, the drive needs to be taken in a vortex order.

Yak clear laptop dvd

The procedure is similar, as with a computer drive. Only you do not need any sorting.

Just hang up the DVD tray and gently wipe the lens with a cotton swab.

Shvidhe for everything, for such manipulations, DVDs are more likely to read discs, ignored earlier. If you don't mind, you won't be able to find help, and you need only replace it.

As soon as you will be helped by the curiosity, please, like and share him with your friends.

PCgu.ru

How can I put my own hands on the drive for optical drives in a laptop?

Breakdown of a DVD or CD drive in laptops is a very common shortage in devices, as it was processed more than 2-3 times. I drank, as if I was unambiguously settling on focusing on the line of thinking, singing the rockets of exploitation, melodiously, as if I couldn’t change the drive's robots again, then I could make the robot work less and more efficiently. The reason for the repeated appearance of the device or for recording information from the computer on the optical device can be criticized both in the hardware and in the program malfunction of the system. Remember: Optical drives in laptops can be read from DVDs for more reasons.

First of all, it is necessary to 100% turn on the functionality of the software in operating system... You can simply insert a disc into the drive, which you can vikoristovuvati yak zavanazhivalny. підійде abo Instalation distribution kit from Windows, for example, some kind of service disk, designations for robots with a hard disk, as well as for checking out viruses, banners, preparing the system before installing the operating system from scratch, etc. Head - put in the BIOS, but the DVD will lead to the first in the locked, so that the most important, and not hard disk, It is necessary to secure the registration. Ymovіrno, bаtato, hto independently having installed the operating system, either from a disk, or from a flash-drive, I know, I'm about it. As soon as such a disk is locked, it will be completely successful, then the inequality of the varto shukati is in the installed operating system, and in the drivers itself, as well as in software products It can be used in the same rank to change the system configuration of virtual and physical optical drives. See all the software for recording, copying DVD discs, and also change it in the attachment manager, where your drive is correct. Crazy, it’s almost impossible to describe all software flaws within the framework of one statute, but it’s possible to universalna joy: Develop the system update.

In a different way, as the drive is replaced by a sprymati blocking disc That, shvidshe for everything, there is no problem at all. Most often all problems are raised before it is necessary to clean the focus of the lens. Saw, tap on the lens, switch the laser head to normally transmit the signal from the DVD disc. As soon as the stage of exploitation was done until the end of the reading, or I will write it down, then one "fine" day the drive can simply be read into an absolutely clean and new disc. The most correct way to address this problem of the field in a clean focus line.

The whole truth about cleaning discs

The infection is majestic, so called clean disks. The idea of ​​such disks is insane, good, but not technically vikonannya is not satisfactory. Deyakі zrazkі can vzagalі substitute corystі simply "finish off" the sensitive mechanisms and optics of the laser head. Also, the wrong cleaning discs can lead to the fact that the corystuvach itself is just a residual "add" drive. Instructions for such discs are often written either in English or in Chinese language, so that the reasoning principle of acting is obstructed by such a disc, which is simply inaccessible to the Russian people. The head grave for koristuvach_v polyagaє in the wrong applied rosters for cleaning. Yak pinned, it is necessary to apply її only on the singing clean bumps, before that it’s not enough, the disc rots out about 45 degrees to the line of the horizon. The overwhelming number of years of life is simply flooding the head of the laser, timidly reading the information with an actually unhappy call.

If you talk about Chinese cleaning discs in the category of 100-150 rubles, then your purchase will not be justified both from a practical, and from an economical side. And if your problem is not in the linz, then the price is pennies, vikinut on the wind. As a result of the protection of the reputation of cleaning disks, it is significant that new contactless cleaning disks have become available at once. The main reason for this is that the smell of the wind turbine is blowing through the laser head without direct contact. The very same clean discs are recommended for cleaning without beating sensitive elements of the optical drive.

Yak clean DVD privid without miyuchy disk

Bagato maystrіv-repairmen, I would like to recommend koristuvatsya with miyuchih disks for an hour, but not to nicoli them. Ochisny disc is a price of solution for cobs of koristuvachiv and home giver. You can only professionally and efficiently clean the drive only if you remove it from the laptop and open it. For a drive, such as a folding possession, that mind is not required. It is necessary to deprive it of steel, a set of vikrutok, a scrap, a head, a syringe, a stick, as well as isopropyl alcohol.

Yak znyati floppy drive

First, you need to start the laptop. Turned your face down, vityagaєmo accumulator battery.

Yak bi-tse didn’t go well, it’s not hopeful, but it’s a fact that it’s a fact: on all modern laptops, all the fastening of the drive to the laptop is vicono behind the help of the 1st gwent. I take a thin chrestovy vikrutka і vityagaєmo yogo.

also Daniy sposib You can take your own for a start-up, if you need a thermal disk, and the electricity is turned on, and the battery is discharged. When you wind up in the technological opening of the head, or if you scrap the drive, you can hear it audibly, and you can pull it back up by pulling on the disc tray.

Yak rozibrati floppy drive

by turning the criterion optical drive with the face down, you can mark the back of the panel, like prikhovu richly important elements of the laser system.

Vitjagate 4 to calm down the gwent, and you can hear it loudly without the smallest zusill on your side. For the knowledge of the rear panel of the laser drive, we have access to the back of the laser diode, as well as the optical system.

Then you can put on a crush, and you can also tighten 4 bristle guintics.

Yak wipe focus lens

Lenza is much more sensitive to the dots, so it’s more beautiful to use neither hands nor tools. For a cob, you can try to be blown around with a blower from a spray from a squeeze.

If it is not possible, then it is recommended that you use a stick of vicorist, soaked in 90% isopropyl alcohol in front of it, wipe the lens. Another dry і clean the tip of the stick is necessary to see the surplus of alcohol. Keep in mind that vikoristovuvati cologne, moonshine, a bottle of wine is simply unacceptable for cikhs. You just naughty. Isopropyl alcohol vapors quickly, but is not toxic, and also does not leave traces on sklі and lenses, which is even more important within the framework of the set technical tasks... Then it is necessary to dry everything again from the spray from the strainer. If you lose it all, please insert the disk drive and screw in the fastening gvintik. The entry is simple and intuitive.

On the other hand, it is significant that in some cases, a breakdown still does not come out, so how can you be criticized in a burned-out LED laser, in mechanics, in burned-out microcircuits of a driver, etc. The remaining repair option is to replace the DVD drive.

muzhik-v-dome.ru

Do-it-yourself DVD repair

There is little information about the pictures about those that can revive CD-DVDs, and melodiously Blu-Ray drives, without going to the expensive help of the fakhivts. There are a number of the most common reasons, which can lead to an even more frequent non-standard drive. Usunennya qih reasons є not repair, but soon technical service CD-DVD-ROMs and a whole lot can be victorious, as well as tips on robotics with electronic technology. More details on oldoctober.com

Some of the most common reasons for the video drive are flickering.

1. Drive belt wear (pass).
2. Zbіlshennya rubbing in mechanizmі zavantazhennya.
3. Obrudneniya lіnsi laser.
4. Decrease of the CCD of the laser.

For usunennya, be it from a number of reasons, it will be necessary to select a part of the drive. The design of the drives can be understood, to that the supervised pictures are absolutely not removable.

Tools and materials.

For professional robots, we need to know the advances in tools, materials and accessories. oldoctober.com

1. Skrіpka stationery.
2. Vikrutka is chrestopodibna.
3. Mid-size brush.
4. Coarse calico (bavovnyana fabric).
5. Mastilo silikonova СІ-130.
6. Passik.
7. Cleaning the servet.
8. Tonka vikrutka.
9. Tweezers.

Pochinaєmo. From one cable to the other to the drive and from the twisted gvinti. Viimaєmo led from the building system unit.

Rosbirannya.

picking up CD-DVD drive repair from the hanging tray. The schob is visunuti tray, it is necessary to have a copy of the vigotomy, it is simple to attach it from the office scrapbook.

Carefully, pushing the clerical scrapbook into the technological opening on the front panel to the drive, namatsuєmo detail to the mechanism, as it is shown for blocking the tray. Detail qia is located strictly opposite the opening. The onslaught is on her and the tray hangs lightly. You can now play it with your fingers.

Vidzhimaєmo suction, scho to attach the face panel to the drive. A collection of vidzhimaєmo one from the sufferers.

Then, in the event of a suction, it is located in the lower part of the drive, and also in a low suction.

Visuvaye front panel, visible chotiri gwent with chrest-like droplets, notably the panel of the metal casing.

Vidzhimaєmo suction and vіdokremlyumo tray from the main mechanism.

The mechanism is re-cleaned as a saw and a brute behind the help of a penzlik. As the old mastic was heavily obstructed, it was seen for the help of the coarse calico and the new mastic was applied.

Replace the relationship with a new one. To wipe the pass and the inner surfaces of the school with a special servet or coarse calico soaked in alcohol.

The laser line is wiped with a special servette. I drank, as it was on the upper surface of the liner, it is possible not to hit it with an unrelenting eye, but there may be a presence there.

As far as the old days are concerned, it seems that even more discs have been recorded on the new bulo, and if there is a problem of reading or writing down, then you can try to improve the laser strum. It’s possible to finish a ton of operation for an hour. Do not fix the procedure, because your privy just doesn’t read the old discs or discs recorded on other people's drives. There can be a lot of other reasons and the size of the laser is here at the 38th minute.

Adjust the laser strum more beautifully, if you are in a suitable station.

Start the drive without the casing and the front panel will see the front wall of the disc tray.

Here on the carriage with a laser mounted є a small-sized potentiometer, the position of the engine and the primary laser strum. The misalignment of the potentiometer is to lay down from the design of the drive.

Persh nіzh twist tsei gwent, obov'yazkovo zamalovuє position of the slit, but the mother point to the point, the same vzagal, but you can just turn it in the cob position.

Turning the gwent 10-15 degrees from one side, and then to the other side, the skin is once again transformed into the readiness of some programs, for example, Nero DiscSpeed.

It can only be inverted directly on decal types of media, for example, CD-R and CD-RW or DVD + R, DVD + RW, DVD-R, DVD-RW, etc. Singingly, it’s not necessary to overturn all types of adaptive noses, but I want to overturn them, because you’ve spent the whole hour talking.

Bagatocylivi are universal drives, try to achieve compromises, and that often, as the type of discs stink, they read more beautifully, and as if they are better. For example, if you have increased the laser current, you can perfectly read CD-Rs and make half of your CD-RWs unreadable.

Zbirka does not represent any difficulties, except for one moment. When inserting the tray into the locking mechanism, it is necessary to add a fixator to the locking mechanism with a straight slot, which is removed in the lower part of the tray.

Povzun zvzvychay is spring-loaded, so it is necessary, if you need to tighten the tray in the guide, zapzuvati pozun in the correct position, the tweezers or tweezers or the second tool. In the photo, the camp of the povzuna fіxuєa sewed for help.

As long as you have in order, absolutely vipadkovo, a small set of passages of different diameter has appeared, then you just need to add an incoming copy. If there is no such set, then it will happen to buy a pass.

I wish the video and audio of the recorders passed, on all the radio channels you can still add humovy passages in the assortment.

When buying a pass, it is necessary to respect the animals immediately on the number of its parameters, such as: peretin, diameter, springiness and strength of vulcanization of gumi, from which there are breakages.

Peretin pass is possible because of the eye, and the fact that you will be able to know the pass is not very large.

The diameter of the pass can be visually significant by pushing the old pass to the new and changing, but the diameter of the new is three times less than the old.

Springiness can be seen behind the help of an impromptu stand, for the sake of that, for a little one.

I will call to change the power of the passive navpomatski without any dynamometers.

The quality of gumi volcanization can be attributed to the color and tactile perceptions. The color of the "wrong" gumi is gliboky black, and the surface is smooth with a high building, which looks like it. At that hour, the huma is "correct" and there is a little siruvatious appearance and a large matte surface.

Similarly, the strength of gumi volcanization can be seen in an hour to update the original size. For test, it is necessary to strongly stretch the pass with your fingers and even quickly throw it off with a plasma on the flat surface. Chim shvidshe passik nabere primary size, tim vische yogo yakist. If you can take a note of it, as the diameter of the pass changes, tobto, win, you can see it, then such a pass is passed for a trivial period and more than that, it is not victorious. However, it is not a fact that you know you at the bazaar passik high quality That is the same, as it is required. To that, for the size of the shorter, you can buy those that, albeit adjusted for diameter, overflow and springiness.

And so, all the parameters are poured into the power of the pass. Vibrating passіk, all їkh vrahovuvati is required. If the pass-through of the pass-through is smaller, then it is necessary to select the pass-through of the short-pass and the navpak. As the strength of the volcanization is low, then it is necessary to vibrate either more or less overreturn, or less or less.

If the pass-through will be tightened strongly, then it can lead to the jamming of the disc's locking mechanism before the wear. As long as the pass is weak, then it’s possible to wickle and lick it.

If in the bazaars there are a few of those close to the authorities of the passive, then it is more beautiful to immediately buy a few of the children, who are going to go. The price of a CD-DVD drive can range from $ 0.3 to $ 0.7.

Close to those.

Reducing the noise of the computer's system unit.

Yak rozibrati and make sure the fan is in a hurry.

installing Skype on PC-586.

oldoctober.com

Part of the DVD drive

As I already wrote earlier in the other articles, I drank the greatest problem for a computer. It is possible to get into kudi only in such numbers, for an hour you just wonder. DVD-drives of optical disks - not a blame.

Saw, if you do not clean, pouring onto the drive of the tray robot, lowering the accuracy of the robot and the laser mechanism and pouring into the quality of the robot. Zagalom, DVD-drive needs to be cleaned if you want to rik. Optimally - once a day.

For cleaning and maintenance, the DVD drive needs mast, cotton sticks and alcohol. To drive a DVD drive from the system unit, you need to remove the front panel. In the first place, you need to hang the tray to the drive. Struggling for the help of any kind of thin and thin object (heads, scrapbooks, shmats for a dart up to 3 cm).

There is a small hole on the front panel of any DVD drive (item 2 in the lower photo). Behind it (from the inner side of the panel), the mechanism of manual opening of the tray is removed. The requirement for small zusillas to press on the whole mechanism through the opening and the tray hangs by 1-2 centimeters, so that you can hang it up to the end by hand.

Go from the tray to take a pilozachisnu kryshka. For some demand, turn the ghost and pull the cry down with your fingers. At times, as a rule, there are two blows (item 1 in the lower photo) and two straight lines, which can be trimmed. Know won without special zusil.

You need to fill up the front panel. Oh, as a rule, chotiri (two from the bottom, two from the sides), or five (two from the sides, three from the bottom). For the sake of the front panel, the bolts (4 or 5 pieces) are unscrewed on the lower drive for the DVD drive and the call is known.

If I want a DVD, I can still see it, it’s not the least, it stinks on many computers and laptops. The software is licensed for Windows, as it is saved on disk, and for the DVD you need a drive (if you can and install it). That is why I want to look at the statistics, as you can yourself, with the help of awkward tools, clean the DVD drive in your computer or laptop.

By a method like the descriptions below, I am trying to prove myself even more effective.

The reason for the fact that the DVD turned out to be nasty is not to read the discs because of interruptions, most often - to use the saw on the laser line. The axis її mi і will be cleaned.

Necessary tools:

• Vikrutka Philips (chrest);
• Zvychayna scrap (її requires rozіgnuti);
• A cotton swab or a stick.

Tools

Yak clean DVD computer drive

For a cob of vityagaєmo DVD drive from a computer. A laptop is not required.

Turned upside down і vikruchuєmo 4 screws for fastening the crush.

vidkruchuєmo screws

Even more accurately known kryshku and vіdkladaєmo. Our uvazi board with electronic components.

Bottom part of DVD-ROM

Now we put it like this, so it wondered at the front panel on us. Our unscrewed scrap is inserted into a small opening, designed for an emergency opening of the tray to the drive. Quietly embossed on the scrapbook until quietly, if you leave the trocha tray, you will not see your own mission.

Embossed with skrіpkoyu

Vitiaguєmo I will hand the tray to about half of the last dose. Now I know the plastic panel. For the whole, it is possible to draw a wicker on a small amount of suction.

Bichni suction face panels

familiar panel

Now it is turned upside down by the Krishka downwards and neatly to see it.

Distaєmo privid DVD from Krishka

Now you can hit the very laser lens you need to clean. Respectfully її look. Shvidshe for all you know on nіy drіbnі hairs or drank.

Do not brush your hands. You may be overwhelmed with fat separation, as you will be able to put it down smoothly.

I take a wadded stick and with light rucks zmakhuєmo zabrudnennya z linzi. It is not necessary to polish the linse, just clean up the drink and hair.

Can be cleaned with a cotton stick

As I already wrote earlier in the other articles, I drank the greatest problem for a computer. It is possible to get into kudi only in such numbers, for an hour you just wonder. DVD-drives of optical disks - not a blame.

Saw, if you do not clean, pouring onto the drive of the tray robot, lowering the accuracy of the robot and the laser mechanism and pouring into the quality of the robot. Zagalom, DVD-drive needs to be cleaned if you want to rik. Optimally - once a day.

For cleaning and maintenance, the DVD drive needs mast, cotton sticks and alcohol. To drive a DVD drive from the system unit, you need to remove the front panel. In the first place, you need to hang the tray to the drive. Struggling for the help of any kind of thin and thin object (heads, scrapbooks, shmats for a dart up to 3 cm).

There is a small hole on the front panel of any DVD drive (item 2 in the lower photo). Behind it (from the inner side of the panel), the mechanism of manual opening of the tray is removed. The requirement for small zusillas to press on the whole mechanism through the opening and the tray hangs by 1-2 centimeters, so that you can hang it up to the end by hand.

Go from the tray to take a pilozachisnu kryshka. For some demand, turn the ghost and pull the cry down with your fingers. At times, as a rule, there are two blows (item 1 in the lower photo) and two straight lines, which can be trimmed. Know won without special zusil.

You need to fill up the front panel. Oh, as a rule, chotiri (two from the bottom, two from the sides), or five (two from the sides, three from the bottom). For the sake of the front panel, the bolts (4 or 5 pieces) are unscrewed on the lower drive for the DVD drive and the call is known.

Then you need to take the DVD drive by the top edge and shake it slightly. Plastic mechanism to drive the vipade from the upper crush (div. Photo below). Pislya zyattya krishok know the tray itself optical disc... Win hanging up to the stop, then see the fiksatori, roztashovani on the back of the tray along the kutas (div. Photo below) and the tray vymaetsya.

All spare parts from the DVD drive of knowledge can be started before cleaning. The main part of the body of the DVD drive is heavy, grooves and bumps. Їх it is necessary to blow thoroughly for a visual purchase of the saw. There is a small amount of navi at the rear wall, or in the grooves, the tray can be driven until the tray stops opening (zakrivatisya).

The tray is brought into collapse behind the help of a motor, which is obtained from a mechanic gum repair (pass). Know the pass is necessary carefully, so that you do not stretch it. I will start to lay down the mechanical robot of the tray to the drive. Before the word is said, problems with the tray are often found in trivial (more than two rocky) exploitation without service. Some of the saws can be stuffed directly into the tray and the tray is not drilled through the chain to the extreme position, but then the pass is stretched through those that the drive mechanism cannot see the tray due to the incorrect position of the tray.

On the other hand, for the pass, there is a management fee for the mechanics (1 or 2 times). Slide, too, be careful, so do not send the loop of control of the motor, so where from the main pay. On inexpensive models, the loop can be screaming or badly soldered. Vidalyaєmo drank from the mechanics with a soft brush, or on both sides (above and below). In the Ideal, you can walk through the entire DVD drive with a handful, and then blow it by turns (for example, for an additional gum pear, which can be sold in a pharmacy).

In addition, since all the saws from the drive body are tidied up, the gum parts are defatted with alcohol and you can see the old mastication from the guides (wait until the moment of THAT there is a lot of fine saw and a small amount of mastic was lost).

In the case of a crumbling tertiary mechanical part, there is a small (small) amount of mastic, but only to make a splash (no more). It’s not guilty that the purchase was made.

With a final touch є blowing (only with a gum pear) to the laser mechanism (wiping it at all times is not possible) and leading to climb back.

Computers are a part of our robots, bang, dozvili. However, with a wide wide range of computers and advanced computer technology, ordinary people are very difficult to use. It’s hard to get away with robots with disks. You can clear a DVD disc from an explicit recording, so you can start playing with a new recording, not all can be done. It’s not so easy to build yourself up. Schob maximally forgive qiu task, more beautiful than vicoristovuvati special program... і how tse zrobiti literally in one click the rapidity і smashing special supplement for recording CDs, DVDs and Blu Ray discs - "Studio Discs".
Yak tse pratsyuє? Everything is elementary! Now it is not necessary to be a great professional in computer technology, Schob viconati tse zavdannya. Vlasne, like a number of others, now it won't be a problem for them to clean up a DVD disc, or go to a new record - music or video.

Otzhe, cleaning the nose - the whole of the function in the program: vibrate the required drive from the disk and the onslaught of the button "Clean the disk". If it is necessary to rewrite and clear the knowledge, an infinite number of times are now possible.

Navigate more - the program brings up a number of new possibilities: the opening of a beautiful design to the disc. For example, where do you store it home archives Or prepare promotional materials for presentation, distribution materials. You can vibrate the disk image or vikoristovuvati graph. Everything that can be necessary and everything that can come to mind is now easy, accessible and simple!

An important nuance is the robot itself from the "Studio of Discs" program, as it is possible to win over, additionally help to preserve all the values ​​given from the loss of hateful life.

"Studio Discs" - price good decision for quiet, who wants not just to maximize the simplification of their splitting with technology, but it is banal to "trim the brand" in everything. The order of the powerful archives and the easy robot will be safe.

Often times, it’s fine to play a disk with a rapt before stopping it’s zavanazhuvatisya, because it’s simply not to be added to a new file, I would like to see it clearly. How did you become in the given situation? Zlamaniy prived, but after all, it's time to wikidate on such a disk? There are a number of ways to try to overcome this problem independently without cardinal calls to replace the drive, or to use the spheres of the disk itself.

1. However, because of the reason for the drive, you need to try to create an additional disk drive. I, if it’s not read, only a specific version, it doesn’t mean on the right in the new one. In case of repetition of the situation with respect to reading discs or a problematic version, this is also the problem of the drive.
2. In case of a problematic disc, it is necessary to cleanse it from a brood. If there is a senseless task for cleaning them, you can say for sure that there is no sense of vitrachati pennies on how rіdini - disks wonderfully come to work in warm water with dear ones. When the whole procedure is done, it is necessary to soak it well with a towel and let it dry out before putting it in the picture.
3. If the head is obstructed by the laser system, the drive can get along with the special "clean the disc". For it is possible to take a ghost from a computer, and when I see it, I will crash the cry backwards and up the hill. Then it is necessary for the help of something thin, ale mous, for example, pins on the face panel through the opening to press onto the fixator and open the tray, so that the access to the line is closed by pressing on it. On the surface of the liner, it is necessary to blow up a great drank for the help of a can, from the pressure of it, or to nip a pear, or in any case not with a mouth. A pear can be used without being obvious in the middle of talcum powder; For the help of a penzlick and a line for cleaning the lines, it is necessary to make a good line, well, it’s easy, absolutely not to put pressure on it. Pislya tsiogo linza is guilty of being dry, but I couldn’t drink it anymore - in the period of dryness, it’s more beautiful to drink. Once you have approved the pile of drying, you need to clean it up with a dry penzlik pulp. This is the procedure for folding the drive.

The disc itself can be not only muddled, ale and heavily garnished, but also infused into the ease of its creation. The ability to change the surface of the surface with a path of polishing. With great and big podryapina, it is unlikely that it will be easy to see, but if it is a new one, without a thread-like ear, “vilykuvati” is completely possible.

The simplest way of craving is purer than junk and paste. The disc must be well moistened with water and applied to the new mouth, which must be spread over the entire surface of the disc. Then the ganchirkoyu needs to be polished to the center of the disc to the edges, until the pasta is quiet, it just doesn’t know. A number of such processes will occur in the form of the disc for the skin stage. As soon as it was seen, most of them were thrown into the eyes of the podryapins - you can vvazhat, which is a disc of polishing. The disc to be polished needs to be done well, get wet and dry. You can write a song by editing it.

І in kіntsі little glad. If you need to add a driver to your printer, scanner, modem or laptop, you can install it on the site www.hwdrivers.com or www.driver.biz.ua.

Close to the topic of the article.