Charging attachment for laptop battery. Yak charge the battery from the laptop

As the statty appeared cinnamon, the food appeared, for it would not be good for the statute - be a weasel. Thank you.

Nareshti go down your hands, look at the food: How to charge our favorite games, such as a phone, camera, mp3 player in extreme vipads, if there is an original charger on the screen?

Immediately, I want to guard it, I'm not a shaman and not a Kashpirovsky, I didn't charge the battery with the power of my thoughts, and I will immediately say: for charging, in any case, if you need it, it’s dull electrical energy with a spur on the input more than the spine of the battery * , Zvidki will be pumping energy into the accumulator of our outbuilding.

*It is possible to charge the dzherel with a dzherel less, but for the rest it would be necessary to re-create what would be needed for a spin - a whole option so I will look at it in the statty.

UVAGA : Incorrect charging and use of the accumulator batteries may cause an additional loss of the battery (attachment), or significant loss of batteries, vibuhu, etc. etc. The article is written purely for the sake of understanding. DO NOT REPEAT !!!

Nybils often in mobile annexes(Laptops, mobile phones, PDA and інші) stagnate lithium-ionnі (Li-ion) batteries. The price is tied to these passes in the early years from widely used nickel-metal hydride (Ni-MH) and nickel-cadmium (Ni-Cd) accumulators.

I will not describe the principle of robotics given type accumulators, so in the Internet they are mostly described. I would like to briefly mention only one point:

Li-ion rechargeable batteries of commercial designation may have the most sophisticated control over the middle types of batteries. Yak rule in the scheme to Li-ion The batteries are driven by a key on the transistor, which, when the battery reaches 4.30 V, is re-energized and the process of the charge is interrupted by itself. In addition, an obvious thermal fuse when the battery is heated to 90 ° C is released from one lancyug to the point of warming up, thus preventing the thermal shutdown. Ale and not all. Deyak accumulator batteries may be vimikach, which spratsovuє when the threshold level is reached, the vice is in the middle of the case, equal to 1034 kPa (10.5 kg / m 2), and the lance is opened. Є accumulator batteryі razrivaє lantsyug navantazhennya, when it drops to a level of 2.5 V per element.

Of course, the simplest:

The easiest way: vikoristovuvati іnshe charging pristіy with similar characteristics. Here we can get stuck in the coming difficulties:

• inconsistency of roses

The problem is assigned, it is easy to see in the annexes with round roses and nagato folds with flat roses.

More readily available meanings of methods from a practical part:

Otzhe: we have a telephone, a charger from the model, a rose, which is not going to go

V given application, I vikoristovuvav a tube of a tube from a shearing of a bag handle. Yak bachimo by the way of awkward manipulation, into the distance to charge the phone

1) Insert a dart into a rose phone

2) One more end of the wires to the rose from the charger attachment

The task has been reached, charging has gone

p.s. After a few years, the phone showed 100% charge.

Nagato foldn_she pristosuvati phone, de the input rose is not round, protest in the range of meanings, the way is so simple. About those yak tse, I got a few drops ...

Another vipadok is discernible, which is so easy to see in the first vipad: You need to charge your laptop, county kupa charging from the laptops, ale roses don't go ..

Here, at the bottom of the list, there are simpler phones. Practically all laptops (take those laptops that have been developed for me) have a pink round

At the table, a number of types of roses were used for me:

Available option: Option 1 and the simplest situation: the diameter of the central contact on the laptop is smaller than the diameter on the charger. In any case, the charging attachment will be easily inserted into the laptop's rose, but there will be no charging, so there will be NO contact. In this vypadku problem to see is elementary: take a splinter of veins from a thin bagatoin dart, insert in the middle of the hole on the rose and go from the power supply unit and go to the laptop. As long as the characteristics of the PSU go to your laptop, then charging it is secret.

The veins are from the wires inserted in the middle of the rose

Important: It is necessary to check the temperature on the rose from the power supply unit to the laptop, so in the case of a nasty contact it can overheat, which can lead to a breakdown of the rose on the laptop, so that repairs will be needed for the laptop.

At the time of heating the rose through the nasty contact, it was necessary to add a number of veins, as they inserted it into the middle of the rose.

Another important point: it is necessary to respect the polarity, the polarity of the connection, as the rule is called on the laptop as well as on the charger, as the rule "+" the central attachment may be a bit of a blame

Another simple way to make the difference is the polarity of the data for specific models, If you go to the Internet, then it will be powered I'll pop the system for example, for my laptop, I know without pictures when powered: “ Toshiba satellite charger pictures »

And yet, if you want to get a little bit of respect for one moment, call the back of the laptop to stick a sticker with the specified parameters as required from the charger attachment, for example, the following plate:

So, in this case, it is necessary to charge a charge with a voltage on the 19 Volt outputs, and it looks like the strum is guilty of not less than 3.16A.

For charging, it is more critical є I want to allow a small outage, in practice I will say that a laptop, which senses a normal load and is charged at a lower value of 16 volts and the upper limit, I overturns 22 volts.

If there is a wicked strum from the power supply unit, then call the maximum parameter, so that if you do not charge the laptop, then the parameter can be 2-3 times lower.

Regardless of all the parameters, I will spend the next hour with additional information and publication.

Clearly analogous vipadok, only mamo navpaki, the diameter of the central wire on the charger is smaller than the diameter of the central wire on the laptop.

In this vypadku it is repaired as it was, as they put the phone on the very cob, it is known that I would open the phone and for the help of the little wedge, by passing it through the adapter, everything would look like this, as in the pictures below

Here the field for imagination is not surrounded, I could finish 2 pieces of dart and an empty shearing from the gel handle:

Chi not foldable manipulations can be approximated by the following design:

how to insert mo into roses'm laptop

You can squeeze the darts to the table on the butt with scotch tape and do not ruin the laptop, you can not just charge it, but try to fix it while the laptop is charging 🙂

Otzhe, we looked at ourselves simple ways If behind our minds є practically everything is necessary (depending on the parameters of the charging attachment), we only need to adapt the roses.

Giblets I will go to the most folding minds.

We will look at the situation, if you know the battery for charging.

Mayuchi in the ordered charging attachments, it is possible to charge the accumulators of bagatokh attachments without any problems.

On my hand, I hit the axis of such a prism:

Wondering about the characteristics

Yak bachimo the range of vykhіdnoї strains to reach the great vіd 4.2 to 8.4 Volts

Perseverance: visually the polarity on the terminals, how you can do it without any methods

Another zavdannya: bring the charger terminals to the battery terminals

Here I will look at the butt of the offensive battery:

For example, I vikoristovuvav a piece of cardboard, two darts and pieces of insulating lines, which wrapped the contacts fixed on cardboard near the battery:

The red light in the given application means that the charging process is going

As the statty appeared cinnamon, the food appeared, for it would not be good for the statute - be a weasel. Thank you.

so bi moviti: you can beat the enemy of the nobility of the middle)

Now you can charge the laptop battery without a charger. If you made a noise about the battery attachment and did not know anything, you would send the battery back. We'll be surprised at what to stock up:

Toshiba satellite laptop battery

Wondering for zvir 🙂

Yak can be seen from the characteristics, the voltage is 10.8 Volts, the range is 4Ah, so that theoretically it really can be charged car battery sprung 12 volts

Yak can be seen from the photograph, the battery block at the first is stored in 6 rounds of elements, which are paralleled in pairs, and 3 elements have left last.

Nayskladnіshe, tse rozibratis in schema z'єdnannya, as it is intertwined with electronics. So the question is, until what kind of darts are connected, the battery can not be converted into a cell, plus before that the charging is secured?

The axis of the win is itself a rose, kudi and I will try to give the strum, so that I will protect the charge of the battery

A safe, ale and tedious way to charge a couple of skin elements okremo, it is not necessary to unsolder the elements, it is necessary whether the strum was dull from 4 to 8 volts.

If you want to quickly get through:

On the first mіsci

• me need to charge the laptop ale charging is wrong *

melodiously krashiy glad: Please repair the charge or add an analogous ale reference

In another place:

• need to charge laptop є stationary computer *

It's a pity that the power supply unit is stabilized 12 V, 5 V, є іnshі naprugi, ale 12 volts is not enough for charging a laptop

Here you can see the option, or go into the middle of the living block and take care of the cork, in order to capture the wickedness, you can do it yourself by converting from 12 to 19 volts (maybe closer to winter I'll try to try it out practically through the results). The ballast resistor is charging the elements okremo-yak describing in the last drop.

• Є: When you need to charge, є I’ll charge you from the building, because I’ll go according to the characteristics and don’t go to the roses.

Lower way of team-hour recovery of a torn dart from the charging attachment

Uwaga! This article is given to be of a purely knowledgeable character, in any case, do not be wary of the description of the work, if you do not know the knowledge in electronics or electricity, and also do not have any kind of possession. Be-yak, you can win the best pardon, you can provoke the wins from the fret of the accumulator, but, shcho shche shyrshe, vibuh і burned.

For the most part, the need for a laptop battery charger, be it a non-standard method, it can be found in even more rare cases. Until then, there is an idea to supervise the rules of operation of accumulators of laptops. To that, if you have a power supply, if you can charge a laptop battery without a laptop, we recommend that you think about possible inheritances described in the first place.

special annexes

Rokіv 10 to that time, leertops virobniks let out attachments for charging spare batteries, and this practice has long been over. Infections on AliExpress and those other services can be used to install chargers, which, as they claim, are suitable for all types of laptop batteries. Such annexes are a set, which can be stored in a living block and darts, before which additional adapters are connected. And I know that it’s obvious that it’s impossible to find such annexes without any knowledge in electricity or electronics.

Yak charge the battery by non-standard methods

Earlier, the controllers, who were responsible for the equal charge of the battery sections, were installed in the laptop. Alle the situation changed, and the capacity of the accumulators was more secure, the virobniks moved the controllers to the building. The process of charging a laptop battery in non-standard ways, becoming a mensh, is not safe.

In order to charge the battery, the laptop pose needs to be described below.

Know the inputs and outputs of the battery

Call at all electronic side-by-side outbuildings - the most extreme clems, which are indicated by plus and minus signs. If it’s not enough, it’s not enough to change the extreme contacts for the additional voltmeter.

Please connect

Connect the voltmeter to the contacts to the living unit, and then insert it at the battery terminals. Perekonayte, scho the rivn springs on the contacts to the living unit go down to the rivn, close to the springs of the accumulator. A charge is added to the drop.

change the controller

Perekayte, scho controller, scho grabbing from reloading, right. For a complete turn on the voltmeter, connect it to the charging process and periodically look at it. In the ideal, the guilt is gradually increasing to one of the advancing values:

• 8.4 volts for batteries with the symbol 7.4 v;
• 12.6 volts for batteries with a 10.8 v mark;
• 16.8 volts for batteries with 14.8 v.

At the same time, as soon as one of the pererahovannyh exponents is reached, it’s hard to change to a spur to the harchuvannya block, which means that everything is good. If it’s just as long as it’s gone, then it’s not a job, but it’s necessary to re-privatize it.

Vipadki, if there is no way to charge the laptop battery in a specific way. For example, it was consumed or it went out of tune with the charging prist_y. Promote the robot and save the data in some extra situations, let the knowledge about those who charge the laptop battery without a laptop. It is important to strictly follow the instructions and to show maximum safety, so that the battery does not run out and the term of the robot is continued.

Rules for first charging the battery

Only for purchases, the laptop has a charge, insurance for 1-2 years, robots. The first recharge can be inserted into the term of your service.

One of the basic rules for first charging a battery, which is recommended for the owners of new laptops, is temperature control. The optimal option is + 15 ... + 25 ° C. Vikoristannya at temperatures below + 5 ° C or + 45 ° C will greatly speed up the term of exploitation.

Having moved to a bad term on the street at zero or minus temperature of the battery, it is necessary to heat up in the room for a long time. It’s hot in New Zealand (30 ° C), it is recommended to pick up special supplies with a dodatk color.

Check out the different points of view from the battery charging drive: vibrate when the battery is discharged again, but in any case, do not bring the battery to such a state. Fakhivtsi will be used for those with the optimal charge level - 40-80%.

With a persistent appearance of such a meaning, the term of service to the annex will increase 3-4 times. Too it is wrong that the priests of both radical thoughts are wrong - both the continuous charging of the battery charge, and the cob discharging.

Ale tse stosuєtsya rules of post-vikoristannya accumulator. At the first charge of a new annex, special instructions will be set:

• when buying, do not turn on the laptop, charge it again;
• having turned on the gadget from the electrical device, bring the indicator to the minimum charge;
• recharge the battery again;
• Repeat the next cycle of charging and discharging 3-4 times.

The battery pack "rozrobtsi" so that it could be recharged in a frivolous way. And also allow you to reconcile new battery on shlyub. If the indicator is displayed, it will turn on quickly or the laptop will turn on when the charge is 100%, and the drive will turn the purchase to the store.

The new battery goes through the next cycle faster, it is not old, it charges more and discharges faster. Nadal pidtrimuvati the required 40-80-hryvny rivn to allow special software. Additional software has been added to current laptops.

To prolong the term of the battery's service, as well as to allow the power supply settings in the menu of the Keruvannya panel and the visonannya glad fakhivtsiv until the onset of charging.

Media Creation Tool do not load a USB flash drive - scho robiti

1. Decrease the power consumption by the way of changing the processor overload through the task manager.
2. Turn on hibernation mode during breaks in the robot.
3. In case of trivial robotics of a laptop connected to an electrical device, use a battery.
4. yaksho laptop most hour not vikoristovuvatymetsya, a battery, which is a 40-80-high charge, varto turn on and roztashuvati in a dark cool ice.

Discharge the charge of a non-corrosive battery at an average of about 8% per month. For a temporary downtime, the first charging procedure can be repeated.

What is the foldability of charging a laptop battery without a laptop?

There are many ways to recharge your laptop without the need for the most and special attachments.

Foldable laptop battery charging without a laptop short confusion in the elektromerezhі, opіkіv before the hour I will attach the vibuhu.

Changing the charge, the flashing discharges can be generated before the battery is occupied. It is not possible to guarantee that the instructions for this method are suitable for your joint stock bank.

lithium batteries All modern laptops are stored with decals from one parallel battery, which may have different characteristics. Folding in the equal charge of the skin element is additionally assisted by the controller, straightening in the building of the annex. Disconnects the battery when recharged.

Head - it is correct to identify the contacts on the battery rose. For example, an Asus battery with a 9-pin connector for a power supply, 2 from both sides - plus and minus, and three in the middle display for reading information on 3 pairs of elements. Another 2 contact, designated for energy control, will flicker when the battery is being charged. On some models, for example on the Lenovo Z565, such a zajist vidsutnіy.

When trying to fit in a battery without a charger attachment and a laptop, follow the instructions, tied to these models.

Folding allows you to put a respectful look to the battery case - all the elements can be mentioned, on the middle of the cleats there are symbols "+" and "-". Information can also be placed on the corpus by a virobnik.

Before speaking, read the following article: Renewed car battery with your own hands

Yak charge laptop battery without front

which is required

For robots, materials and tools are needed, which are available in a leather store of radiotechnics.

It is required to recharge the battery:

1. Living adapter. It is recommended that you choose your laptop model or analogue.
2. Midniy grind with peretin 1-2 mm.
3. An insulating tape is a bit of a gimp for insulating and securing a connection.
4. Resistor for regulating the strum, which is supplied to the battery (optional).
5. Multimeter for control of straining on the ABK terminals.
6. Soldering iron with soldering iron.

Battery charging process

The battery should be discharged before the cob. When viewed from the laptop - change the direction and set the polarity at the extreme contacts with a multimeter, navigate it to the case є prompts.

As long as the probe does not fit in the space between the stitches, you can choose simple sewing heads, fixed with an insulating stitch. Vona may be stuck if the wires are fixed at the extreme contacts. We will not use a multimeter to change the knowledge on the attached wires, or on the roses of the adapter itself.

The resistor must be installed when the analogue adapters are inserted or the adapters are larger in order to regulate the strum.

Vin is soldered into the positive wire. Yogo vikorystannya neobov'yazkovo, ale bazhano, especially if there is a sense of the streak in the electrorecord or the sum in the adapter.

Before charging the battery of the laptop without a second, it is necessary to reconsider again all contacts for the subject of fading, and during the charging process, the battery did not overheat.

In addition, as the circuit is selected, the adapter is connected to the net, and the charging process of the accumulator battery is repaired. On the whole yogo experience, it is necessary to respectfully follow the multimeter and control it over.

It is to blame for the smooth growth і in the result of zupinitiya zavdyaki zavdyaki zaistu. When the controller is out, it will be done with caution and analysis independently, so that overheating and loss of battery power is detected. Boundary values ​​in such a way for the skin model need to be selected okremo.

Before speaking, read the following article: Prank Error calling method on NPObject yak vypraviti

Yak charge the laptop battery for an additional charger from the car battery

The accumulation of the accumulator battery from the electrorezine in the road has become due to the appearance of special charging attachments, which can be connected before the car is lit up. The knowledge in electrical engineering is not visible, the instructions are simple: plug into the socket to light the cigarette, and the external cable is connected to the external port of the computer.

Folding in a whole range can only be caused if there are no roses in the cable. Ale and in the whole situation, it is possible to choose the following links. The procedure itself is trivial in the middle, close to 3 years, and it is possible to practice using a laptop during the whole period of time.

Rizik of a step-by-step abruptly vivedennya from the fret of a laptop battery anyway it’s all the same with a stagnant method. Locks, defective models for charging in a car, and for charging in a car, when used for storage and transport - everything can be brought to the generation of an electric device, which is not available for permanent charging. Tom Varto is respectfully placed before the charger vibrator.

With frequent trips, the rise in price of the winery is characterized by a problem - the recharge of the laptop battery, which allows for more power in the road. In general, in the edge of the corys, spare batteries with you, replace them if necessary. I want to know the problem - how do you charge your money? Also, the option from їkh permanently change may not pass. If the battery case is permanently replaced, it will quickly come into disrepair for it.

This is often the reason for charging the laptop battery without a second. flicker effective ways, Ale all the stench to vikonuyutsya on their fear and risik - we will not get the information about the decal of the available options. If you don't care about the success of these victories in a large number of cases, about the absolute safety of the method, say not to be brought, just more when robots with Chinese batteries.

Yak charge laptop battery without laptop

The most important option is to get spare batteries for the road and minus if necessary. Ale taky option with its own passages in the edge of not hand. Seryoznі spend an hour, the same security is not often replaced by a few times a day, it’s just not bargaining for such cost and wear.

I can add a spare battery

Such a vipadku will think about how to convert the battery from a laptop without a laptop, is it more beautiful to go for charging it? Azhe dermal accumulator for transferring without contacts, a computer for controlling the correctness of the charge.

Earlier on the market, you can add extended special attachments for charging spare batteries without the laptop itself. Alle in the rest of the rock, the stink of the rink has practically become known, so nutrition about the way to charge in the region is relevant.

Yak to charge the laptop battery without prioritizing - converting to practical methods

Try to charge the battery without the computer itself, you will not be able to get enough of it, including the heat of experiments, it is not easy to end up with serious troubles and to wind vibuhami. This situation prompted all the viruses to transfer the charging controls from the computers to the batteries. Such a pidhid became an unrecognizable rule for virobniks in the remaining 5-8 rocks.

Otzhe, for independent charging of the accumulator of current models, it is now sufficient to harness the input and output of the clemy, if only the trocha that is designated for it. The optimal option is that the sprinkler was made to the living block.

Insertions here, the controller himself will adjust the balance to the charge of the lithium elements, and at the boundary level of the charge interruption.

There are no special problems with the noise of incoming and outgoing clems. Set the battery on the extreme terminals - a galuzevian standard for by-run technology... As a rule, there is also a plus and minus. If the stink on a specific computer model is not specified, use a voltmeter to speed up the polarity.

The first way is to try to find out the special attachments for charging laptop batteries. The stench will stay an hour old, but if you do, you can know a suitable option for your model.

The most important option is the availability of decal spare batteries, so you can charge them in your laptop and take you on the road with you. Such a pidhіd is the most rational and allows you not to worry about saving the battery for an hour of manipulation with charging.

Do not forget about the reversal

To change the knowledge, I will go quickly as a tester. The tester is connected to the contacts in the living unit, ticking to the contacts of the battery. If on the contacts of the power supply unit the pressure drops to the value close to the battery power, then you can talk about those that are being charged to the process.

We looked at the efficient and accessible principle of the charge without the computer itself. It is important to remember - so come in available only for the new batteries of all kinds of virobniks. Often, Chinese counterparts are not equipped with a common zahist, so risikuvati is not varto.

Thanks to that, your life will not have such an inappropriate situation because of the need for a thermal charge without a laptop. If you want, if necessary, you can speed up our recommendations - the most and the most promising, and the safe decision, the transformation into practice.

The optimal option for frequent and trivial trips and trips is to rob bets on models of computers with a trivial charge, to fill up with a lot of battery. And if you need to buy additional batteries and take along with you - in a large amount of sufficient amount, spend 10 years on the way, spend too much time on the call, broadcast your buts or work start-ups if necessary.

Pitannya about those who charge a laptop battery without a laptop, relevant for quiet, who, for example, absolutely unsupported charge of charging attachments. And a computer in a workstation is still needed. Yak to wake up the battery in the whole vipadku?

As soon as the hours passed, earlier it was possible to charge the computer battery with the help of the charging attachments, which were broken up specially for the cycle. Ale at once їkh has not been vypuskayut for a long time. And the main problem is that the laptop battery is properly charged, so it isn’t naughty youmu.

Foldable Lithium Ion Battery Designs for Laptop Computers

Persha dumka, yak come to mind - why not take with you an analogue battery in reserve? From one side, a whole logical solution. Ale, if you see the batteries from a laptop, it will appear, but not everything is so simple as to be built. Make sure to tweak the battery even more in order to get the battery out of the laptop and insert it into a new battery. Tim bigger, і PC case, і іdсік for accumulator batteries from light plastic. With some replacement and installation of a new battery, the stench can easily get angry.

If you respectfully take a look at the roses of such a battery, you can know, as a minimum, 7-9 vivid contacts, on the view of a car battery, de contacts, as vidomo, only two: minus and plus. All the settings control the charging and discharging process of the skin "can" in the middle of the battery. There is also a board, the entire electronic system is programmed to capture lithium-ionic elements from overloading and malfunctioning.

Such a board, for the sake of safety, is guilty of being installed in the battery of any portable attachment with lithium-ion elements. Without its stench, you can easily vibrate. For "emergency" situations, the controller is on the board electric lance and block feeding the strum.

Yak battery, replacing the laptop battery and charging it without a second, from any new battery, is not forgiven to the employees. However, if there is no way to go, then you can try to integrate into your life a few ways, which will promote the lovers of electronics.

Charging a laptop battery without a front: shukaєmo required contacts

When working with a battery pack, it is important to adjust the borderline accuracy, so that you do not have to be pardoned in a direct connection to a voltmeter and a charging attachment for the most needed contacts. On the butt of the lithium-ion battery, see Asus laptop It is possible to hit, on the rose є not two contacts "plus" and "minus", like, for example, on a battery of a car, but there are 9 outputs.

Prior to the speech, it is necessary by definition - whether it is a battery for a laptop battery, right from the firm-virobnik, be stored from the coming elements:

• BMS driver(Win the same fee);
• battery "banks" (Number of them can be small, 6 pcs or more);
• contacts, Which will provide you with an electric lance and a harchuvannya of elements, so if you plug it in before you pay software security laptop - with the control of the "charge-discharge" process, I will become a battery and uninterrupted exploitation will attach.

Also, on the butt of the accumulator battery from Asus, you can see that the central group of three additional contacts is attached to the "banks" (one wire for two pieces). The stench was tied through the BMS driver for diagnostics of the indicator of the tension in the middle of the skin for the elements of life (a free internal voltmeter).

On the left and right edges, pay more for two pairs of wiring: a chain of "short-circuited" signals on the board. It can be seen that the function of the darts is insha, and the stench does not help to "run" the battery in order to start the charging process, so the board itself simply does not give the charge.

In order to "start" the process, we need two wires from nine, which are not short-circuited by the board. As soon as the wiring is shown to the right, we will recognize the wiring under the numbers 3 and 7. The same two contacts and an electrical signal come through the base, and the transistor, until it stinks, is displayed for the inclusion and switching on.

All that is necessary to develop is to identify two contacts from nine and close them with oneself. As soon as the lancet is plugged in the whole place - do not try, when the "tick" is in the dart, the battery will not run.

Such a method, in the form of robots with an analogous electrical circuit, is viprobuban and a complete robot. And the battery charging itself can be done in a very different way - for example, with the help of an Imax B6 charging attachment and a multimeter, a control voltage, you can go up to the elements.

However, the nobility went about those who, not all laptop batteries, were prompted for such a scheme - because of the obvious contacts in the unlocking. In the іnshomu vipadku mova, shvidshe for everything, if it’s about a laptop, not a zajist who is not baked by such a system. And this means that the required contacts will be communicated on their own, carefully looking at the battery from the computer and accessing all possible technology without protection.

Yak charge the laptop battery for an additional charger from the car battery

Denmark has a way of charging to go into that kind of problem, because there are no problems because of the necessary "plus" and "minus" in the microcircuit of the battery. The method of practice is in that case, if the battery has stopped charging in the laptop itself, or the charge is already small.

In order to charge the laptop battery from the car battery, you need to unsolder from the pay minus pole and the tax to the additional "crocodile" from the car charger attachment from the analog pole. Another "crocodile" is simply put on the plus pole of the battery.

Charging works, as a rule, with constant monitoring of indicators of the struma and tension. Naybіlsh coming, as a source, є the general mode of incremental renewal. For a period of about 2 years, in the middle, it grows up to 13.8 V.

The principle of charging a laptop battery without itself is not easy in the system, since the owner of the computer has a lot of tools in the electronics. Moreover, microcircuits of modern Chinese laptops can be seen from one point of view, or from the daytime singing system and from a glance at the specifics. If the battery is not naughty, it is possible only in that case, if you go to your meal thoughtfully. Well і, slyly, before carrying out any experiment, we will not take live spilkuvannya with a lot of adolescents of electronics enthusiasts.