Yak pours in an hour to see on іgri. LG TV, byutova technology, mobile telephones, monitors

A monitor is a part of a computer, so without it the whole robot system will be standard. It is so important to think about the choice and the mind, as the monitor itself is ideal for you to go. Before Tim, when you go to the store for a new computer, or else for a screen, then respectfully vivchit such an important criterion, like an hour to see.

It’s not a skinny knowl, which is also the best indicator of how much you respect each other for an hour of vibration. You can read about all the prices in the statistics.

It's also an hour to see the monitor

Most of the time, there are not the most people who have slipped through the coristas of the house, if a screen can be stored in thousands or millions of pixels. The small particles constantly change, so that they can be displayed on the screen as if they were the image, as it would make the robot more comfortable.

The hour for the monitor is the smallest hour, for any pixel you can change. Vrakhovutsya as a change of yaskravosti, light, so also in the power, as your screen.

IMPORTANT! An hour is spent in the smallest units - milliseconds. It is obvious that, as it is vrahuvati, there are a lot of changes on the monitor to be displayed practically mittuvo. The robot at the computer would be bored more often and not by hand.

The fluidity of the picture is important not only for the extravagant robots - especially the suttuvo difference is remembered for the hour when looking at movies or other media files. Newest models of computers can not boast of high speed, even more modern technology allow the proprietors to push all the more options to push in more options, like pleasing to see the most demanding corystuvachiv.

Ale Yak rozibratsya in what time to see the monitor є to be the best? The power supply can be used to give you more of your needs.

Bezperechno, the whole parameter is the most important when buying a gaming computer. That is why, in the games itself, a mittєva change of the picture on the screen is required without post-galvanizing and rosy parts.

Zvychano, the hour to see it is as low as possible. What is the lower indicator, the less the image and the more accurate the computer for igor.

If you have already added the monitor, and if you want to protest that hour, then there are two ways for you. Skin, because of them, is not visible in the presence of special tools, so that the skin can fit in because of the test on its own.

The first way to be called GTG. With this help you can estimate how quickly one pixel of the building changes. If the indicator is superbly high, then you must immediately remember that the picture will look like it. Some people can get help another test is MPRT. Vin allows you to poke, as you do not want the image to be left on the screen.

In such a rank, for the game computer, ideal solutions for the future will be the best hour for everyone. If I don’t have a lot of respect for this parameter, then the first thing to do is change all the enemies from the gris. Professionals recommend adding a display with a parameter not more than 8 ms.

Yakiy hour to vidguk piksel is more beautiful on the monitor

Serious koristuvachіv, who don’t get grat on computers in іgry, maybe not take an hour to see the monitor. I darma! That is why, for whatever reason, the screen, the speed of the message is important.

There are a lot of older models, for which the indicator is very high, it is less important for the star and in general for the self-esteem of the people, who have tried a lot for such a computer.

IMPORTANT! The low hour of seeing the picsel decreases the risk of persistently in the eyes, if you have a headache and other uncommon symptoms. Vcheni explain the interconnection between them, but constantly being careful of the trusting picture, disgustingly pouring into the lude.

Moreover, if you are a victorious monitor, you will see discomfort in a great hour. Rizka zmіna pictures, chi fіlm, serіal, or just a tidy typing of text, supervised juxtapositions on the new image of the old one. In such a rank, you can simply embody the essence of the shortcut, as if you are beating when typing on the keyboard.

Now you know that it’s also an hour to see a computer monitor and it’s an indicator. Choose if the screen is as low as possible, because the value of the parameter is as low as possible, but the use of the annex did not bring any significant health benefits, and it wondered if it was taken into account. In addition, having learned about the ways to change the hour at a glance, you can protest the already obvious monitor, and if a disastrous result, go to a new one, which then replace it with a new one. And with the knowledge we have built up, the new display is ideal for you.

Respect for the "hour to see" parameter - good joy. The axis is the only one for the specials, but for the common people there is no unequivocal assessment of the whole hour (response time). The same company, which is playing TV views, can bring the rogue into the clock for an hour, and without that, the rogue will be right.

The headquarters of the understanding of the "hour to see" is a whole hour, it takes a moment to see in milliseconds, it is necessary to change the form of a crystalline middle-sized axel from an active stand in idleness. However, it’s not a skinny virobnik who can look at the shape of the size.

The main characteristic, in which all the instructions and systems converge, are the smallest indicator, the turns in milliseconds, which are displayed on the display, the change of the picture is displayed, and the form is read in the image. It is especially important that LCD TVs are 100% of the first models or virobes of non-fashionable virobniks: usually young Chinese and Korean companies, which do not invest in advanced technologies.

A great indicator of the "hour to see" is the time before the "picture" is sized. On the screen, you can see it like this: Ob'ykti, how to quickly collapse, to leave a trail behind you, for when there is a quick change of frames there is an overlay of the image one on the bottom. The offense can be noted on the screen. The main rank in the film is the "action" genre, sports programs, dynamic stage and computer games (if the prefix is ​​connected, it’s like a monitor).

As wide as possible, the ranges of contrast adjustment, the brightness of the different buildings to the screen would not be wide; Deyak virobniks, who do not particularly look at the dressing of new boxes near the sphere of micro-crystalline monitors, have formed a path, which is important to name a nakshe, not kumedny. Smells felt in the provadzhuvati their standard hour to see. Result: no single system - no single thought.

Versii

For the first models of LCD TVs, they have adopted one single standard, which is called rise-and-fall response or TrTf (Time rising, Time falling). The change in the hour of the change of the crystal in milliseconds from the active camp (black color) to the inactive (white color) and back. As a matter of fact, the activity of the black color is reduced by 90%, and the activity of the white colore is less than 10%. The current standard for televisions and monitors has been accepted by the VESA company, as it has accepted the video electronics standards.

Protest of the strict rules here is dumb. Unimportant to the acceptance of the camp of speeches and the authority of VESA, a lot of virobniks posed a laviruvati within the same framework. For example, in the inventory of the TV-viewer model it will take less than half an hour: the change of the Black Colora is too large, and even more than half an "hour to see". Another trick that the virobniks are successful in is the process of manipulating numbers, so that the declaration of the maximum speed to the reader in the meantime replaces the average statistical ones.

There is another option for Vimir Vidguk. GTG (Gray to Gray) is not the swiftness of the black color, but the hour of the gray color, so called, the gradation of blue tones. Obviously, the specifics do not relate to each other.

Moreover, the number of virobniks is important, including the parameter for the hour in the instruction before the current model, does not mean the system, which is used for calculation. Іnshі vzagalі doesn’t tell the hour. Often the price is tied together, but just nothing is done.

"Canonical" option

Great companies in the light of the name vikoristovuyut standard TrTf (Time rising, Time falling). Yogo and accepted in the respect of the most precise and the most popular.

It is worth noting that with the common system, an hour of 20-25 milliseconds is recommended to be optimal. Bagato fakhivtsіv zgodnі with such interpretations and justifying, which is such an indicator of building up to ensure a comfortable peep in video with vivid scenes. Ale nuance: deyakі koristuvachі with such a standard izglyanut loops, scho "reach" for objects and objects on the screen. Moreover, a singular number of glances develop the train in twelve and eight milliseconds. It’s better for everything, in a whole lot of questions about the individual health of people, specifically, a healthy row, which is shown on the screen. This version has the right to display, for example, for some data, the image of a cinema television set with a frequency of 50 Hz screen, equivalent to 14-16 milliseconds of a small-crystal monitor.

Epilogue

In the minds, it was said, next to it, that the parameter "hour to see" is important and necessary to take the value when choosing an LCD-TV or a monitor. Ale vona can "v'yazatisya" і with the same details, with the spring from the system, behind which the virobnik provіv vimіri. I’m a vampire who can help me.

The VESA company is at once working over the unification of the zagalny standard, which is based on old people, good TrTf. It is conducive that it is not bargaining for everyone to introduce the structure of the process into a living experience.

Talk about the specific parameters of RC monitors - and the topic is regularly discussed not only in our articles, but it is practical on any "out-of-the-box" site, but on the subject of monitors - you can see three answers to the problem.

Rivn first, basic: why not fool us virobnik? Zagalom, all at once is absolutely banal: serio-vyrobniki monitors do not stoop to banal deception.

Rivn is different, tricky: how do the declared parameters mean for good? In fact, before discussing food, it’s about those parameters that are determined by vyrobniks and how practical it’s for the consistency of results. For example, a good butt will be vimir hour to see the standard ISO 13406-2, devin it will start as a sum of hours the matrix is ​​shifted from black to beads and back. Until then, to show that for all types of matrices, the male transition takes a minimum hour, at that time, at the transitions between the displayed images, I can see it at all Tim is not the least, the whole stock cannot be brought to the first level of negotiation, the scrutiny cannot be said, but the vyrobnik is deceiving us here: as if the monitor displays the maximum contrast and the hour of changing the "black-and-white"

However, there is still a lot of rіven, the third: nutrition about those, like those who are parameters to take our eyes off. Do not leave the monitor (they are engaged in the lower part), I will aim the butt from the acoustics: from the technical point of view, the lamp can reach the sound in the middle parameters (a high level of harmonics, trash impulse characteristics, say so far), about the quality of the output, the sound simply does not come through. Tim doesn’t mean that the sound of lamp technology, navpaki, sounds like it’s not to the listeners, but it’s not the one that is actually more beautiful than the transistor one (as I’ve already said, it’s not so), but it’s a song that is brought in by her, for hearing.

Zrozumіlo, rozmova about the thinness of the reception to go, if the parameters of the outbuildings, it is necessary to negotiate, to finish the good in order for such a thin infusion to be poured. You can take a computer audio speaker for ten dollars - do not switch it on until it comes out, you won’t start to sound more beautiful, more so it’s possible to overturn whether it’s the imperfections of the driver. So it is with monitors - for as long as an hour the matrices became dozens of milliseconds, and the special features of the picture with the help of the eye just didn’t seem to be discussed; now, if an hour has passed to a single milliseconds, a raptor has appeared, but a monitor's speedcode is not a passport for a monitor, as it is subjectively accepted by people - it starts as a matter of milliseconds ...

At the promulgation of your statistics, I would like to discuss the passport parameters of the monitors - the particularities of the monitors, the view of the reality and so far - but the deyakі of the moment, it is very common for people to be We are about to see the hour to see the monitors.

The hour to see the monitor and the hour to see the eye

It’s a long hour at the back of the monitors — that’s what they say there, and the big one — it’s possible to build solidity, when it’s just an hour to see the RC-panels (the real hour is to see, and not the passport value, as it’s all known, with ISO -2, it seems like it’s not exactly what it’s supposed to do) go down to 2 ... 4 ms, then the parameter can simply be forgotten, further away from the change there is nothing new, it’s so easy to stop thinking about it.

The first axis of such monitors has appeared - the last models of game monitors on TN matrices will compensate for the average hour (GTG) in the order of one milliseconds. It is not negotiable at once such speeches, like artifacts of the RTC or the inadequacies of TN technology - it is important for us to deprive us of those that are meaningful to the figures. However, if you put it in order from an extraordinary EPT-monitor, then there are a lot of people to remember, but the EPT is still better.

It’s not marvelous, but it’s not so, but you need to check RC monitors with 1 ms, 0.5 ms. It doesn’t seem to be very visible from the occasional 2 ... 4 ms panels. Therefore, the problem here is no longer in the panel, but in the peculiarities of the human zoru.

Try to know about taku ric, as the inertia of the eye. It is enough for one or two seconds to wonder at a yaskraviy object, then to flatten your eyes - and in more seconds you will be able to see the image of the image. Zrozumіlo, vіdbitok will finish the non-weird, actually contoured, and we are talking about such a long interval for an hour, like a second. With a stretch of about 10 ... 20 ms, when the actual picture is known, the picture of our eye will sell the image completely, and if it’s not enough, then it’s quickly faded away, if the contours of most of the large volumes were lost.

In the range of EPT monitors, the energy of the network has a positive role: the managers of the screen are not the same as the efficiency of the screen. The triviality of the luminophore of modern tubes is close to 1 ms, an hour of changing over the screen is 10 ms (with a frame rate of 100 Hz), so that, as our light is free from energy, we used to light the light down / down. visota to the screen. The price can be easily demonstrated by taking a photo of the EPT-monitor with small showcases:


When vitrims are 1/50 sec (20 ms), the image is very clear, it takes up the whole screen in one piece.

When the window is lowered to 1/200 s (5 ms), a wide dark smog appears on the image - for a whole hour at 100 Hz, half of the screen rises, so the luminescent light goes out on the last half of the screen.

I, nareshty, with a vitrimation of 1/800 sec (1.25 ms), I bachimo vuz'ku light smog, so big on the screen, for which a small and brightly dark slid is pulled, the main part of the screen is simply black. The width of the luminous line is the beginning of the hour when the luminophore shines.

On one side, such a behavior of the phosphor zmushu us vikoristovuvati on EPT monitors of high frame rates, for modern tubes - at least 85 Hz. From the side, the very small hour of the luminophore's luminosity, and to create before that, be-like, find the best, current RC-monitor all one thing is not rich, but rather sacrifice for the shvidkistyu old good EPT.

Let's imagine a simple vipadok - a big square, how to collapse on the black screen, say, like in one of the popular TFTTest programs. Two suspended frames are visible, between the two squares, destroying one position from the left to the right:

In the picture, I tried to visualize some of the last "instantaneous signals", the first and the last of which I fall at the moment of being visualized by the monitor of two suspicious frames, and two middle ones demonstrate, as the monitor is led by the frames of our eyes in the industry.

At the bottom of the EPT monitor there is a small square that can be whispered, correctly displayed when the first frame arrives, even after 1 ms (an hour when the luminophore is displayed), I started to quickly go out, when another person came to the screen before. However, for the moment of the inertia of the eye, it’s just about 10 milliseconds - it’s just about the darkness. At the moment the monitor edits another frame, our brain will reject two images - a small square on the new mice plus the video bit, which quickly goes out on the screen, on the old mice.

Active-matrix RC-monitors, on the view from the EPT, do not flicker - the picture on them is captured by stretching the entire period between frames. On one side, I do not allow you to worry about the frame rate (the screen doesn’t seem to be in any way, for any frequency), from the other ... we are astonished at the picture. Then, stretching out through the frames of the image on the EPT-monitor, it quickly died out, and on the LCD it became overwhelmed by the invisible. When another frame arrives on the monitor, our little square is displayed at the new position, and the old frame goes out in 1 ... 2 ms (in fact, an hour of pixel extinguishing from modern TN matrices is also, like the hour of the luminescence detection. However, the picture of our eye is overwhelmed by the image, as it will go out in 10 ms after the image of the real one, and until that hour it will be added to the new picture. As a result, in about a dozen milliseconds, when another frame arrives, our brain will immediately display two images - a real picture of another frame from the monitor screen, plus overlays on it with the first frame. Well, why is it not zvichne zmashchuvannya? .. Tilka now the old picture is not taken by the matrix of the monitor, but by the picture of our powerful eye.

Speak shorter, if the first hour to the monitor of the RK-monitor falls below 10 ms, then the decrease is even less effective, below you can be ochikuvati - through those who started to see the picture, I will remember the role of the energy of the environment. Moreover, it’s possible to move the monitor for an hour to insignificant values, all one sub'actively will be more, below the EPT. A glimpse of a glimpse at that moment, an hour of surplus imaging on the screen takes place: in the EPT, an hour for the arrival of the first frame plus 1 ms, and in the Republic of Kazakhstan, an hour for the arrival of another frame - but we are close to a dozen seconds.

The way to display the problem of a whole lot of obviousness - since the EPT is made vivid through those, for more than an hour, between two last frames of this screen, so yes there is a surplus image before the arrival of a glimpse of that new image Efect the need to insert with a piece shlach between the frames of the image of the additional chorny frame.

It was the very same thing that was announced by the BenQ company, having presented the Black Frame Insertion (BFI) technology. Having transferred the equipment to the monitor, it will insert additional black frames at the image, so that the robot of the serial EPT will be able to be seen by itself:

Tsikavo, scho a little bit was transferred, scho frames are inserted by the very change of the image on the matrix, and not to the extinguished ones. This technology is generally acceptable for fast TN matrices, protects on MVA and PVA matrices, the problem with this great hour of switching to black and matrices run in the region of 10 ms - in such a rank, for them an hour is necessary for inserting a black frame, changing the period of repetition of frames in the main image, and the technology of BFI appears to be unauthorized. Before that, the frame is surrounded by the maximum triviality of the black frame, it is not the period of repetition of the image frames (16.7 ms with the standard frame rate for RK 60 Hz), and sooner our eyes - when the great triviality of the black inserts is not monitored Let's remember, lower on EPT with rozgortkoyu at 60 Hz. It is unlikely that someone will be honored with a tse.

I will assign it to the right, but talk about the subset of the frame rate when the BFI is stuck, as it is not correct to do it, it’s still incorrect: the matrix frequency is wrong, it’s the frame rate, the frame rate is too high, the frame rate is too high. There is nothing wrong with the video card.

As a result, since BenQ presented its FP241WZ monitor on 24 ”PVA-matrix, in the new and in truth, it was not ordinary to insert black frames, but analogous for the purposes of for the matrix rakhunok, and the lamp control rahunok pdsvichuvannya: at the required moment, the stench simply goes out not too well.

Apparently, for the implementation of BFI, such a view of the matrix does not see the same role for such an hour, and it is possible with the same success of storing it on TN matrices, as well as on any other. At the bottom of the FP241WZ in the second panel behind the matrix, 16 horizontal lamps have been displaced; On the screen from the EPT, de (as they were on the photographs with a small showcase) on the screen, the smog of the rosette was glimpsed, in the BFI, navpaki, the smog is dark - at the time of the hour 15 lamps from 16 are on, and one is extinguished. In such a rank, for an hour of the BFI robot, stretching the triviality of one frame on the FP241WZ screen, the vuzka is dark smuga:

Cause the choice of such a circuit (the extinguishing of one of the lamps will replace the lighting of one of the lamps in the accuracy of the same EPT, or the extinguishing and firing of all lamps one hour) is quite obvious: it is very obvious to him that the RC monitor, by means of a projection of 60 Hz to a strong picture. Vuzka is dark, there is a lack of synchronization with the personnel monitor (so that at the moment before the skin of the lamps goes out, the matrix of the matrix is ​​shown above it by showing the front frame, and until the moment the lamp is ignited, one new description will be recorded in the new description) more effectively, the inertia of the eye, but from the side, do not produce to the smallest measure of the image.

It’s noisy, because of such modulation of lamps, the brightness of the monitor falls to the maximum - ale, zagal, it’s not a problem, but the RC-monitor may even have a garny reserve of brightness (in some models it can take 400 cd / d / m2).

Unfortunately, our laboratory FP241WZ didn’t have a good time, so in the food of practical storage of new technology, I don’t need to go back to the article of the new website BeHardware. BenQ FP241WZ: 1rst LCD with screening"(in English). Like Vincent Alzieu, the new technology will effectively reduce the sub-active evaluation of the performance of the monitor's reaction, protesting, it’s unimportant for those that one lamp is not going to live in an hour in some vypadki pomitit the little screen is still possible - right in front, on the great one-color fields.

It’s better for everything, it’s tied up with all the same lack of frequency of staffing - as I wrote it, changing the lamps is synchronized with it, so that the repeated borrowing cycle is 16.7 ms (60 Hz). The sensitiveness of the human eye until the least amount of light lies in the back of the minds (for the butt to finish it off, say, 100 Hz, the small amount of the luminescent lamp with the electromagnet ballast is important to sweat, wondering is so easy on the periphery of the chicken) Let’s be smart to see if it’s been running, but the monitor still has a defect in the frequency of the vertical rod, I want to see 16 lamps for the display, and yes, a positive effect: as we know well from EPT monitors, at least for the entire 60 Hz period. little is not necessary, and the axis of practice behind such a monitor will be problematic.

The most intelligent way out of the situation is that the monitor switches to the 75 or 85 Hz frame from the RC monitors. Those who read our readers can read, how many monitors and so can see the 75 Hz output - alas, it's a pity, I’m distraught, because the picture is broken in a large amount of frames in just a second on a computer: a monitor skinnable frame and prodovuyu image on its matrix at 60 frames per second. It is possible to document such behavior by photographing the object, how to quickly collapse on the screen, with a large enough window (about 1/5 of a second - the camera took a dozen frames in the monitor): on the monitor you can see the monitor at 60 Hz. Rukh ob'єkta on the screen, and at a rozgorttsі 75 Hz at a new one there are dirki. Sub'actively, the yak is perceived at the expense of the smoothness of the ruch.

Krym tsієї pereshkodi - songs that are easily overkill for the presence of such a bunch of monitors from the side of the virobniks - one more thing: because of the increased frequencies and frames, it is necessary to pass through the interface by switching on the monitor. In addition, it seems that in order to switch to 75 Hz output, monitors with working resolutions 1600 × 1200 and 1680 × 1050 need a dual-channel Dual Link DVI, some of the working frequency and a single-channel Single Link DVI (165 MHz) are displayed. The problem is not based on principle, but overlaid on the complexity of monitors with video cards, especially not new ones.

Also, the increase in the frequency of frames in the very same way to change the image quality with the same passport hour on the panel - and again the effect of tying from the energy of the eye. Supposedly, the picture rises for the period of one frame at 60 Hz (16.7 ms), the screen will be damaged per centimeter - so when the frame changes, the image of our eye is to display a new picture plus superimposed on the old picture by a centimeter. As soon as the frame rate is higher, then the frame rate is not 16.7 ms, but approximately 8.3 ms - obviously, and two pictures are destroyed, old and new, but one of one frame is also less than two points. , vdvіchі to speed up the train, to reach for the images, to collapse. Obviously, in the ideal, with even higher frequency of frames, we can see the picture itself, like it is in real life, without additional piece of artwork.

Here, however, there is a need for intelligence, but it’s not enough to increase the frequency of the monitor’s frame rate, as it’s necessary in the EPT to deal with the screen’s measures - it’s necessary, for all the frames of the image of the bullet are unique, not sensible for any future frequency.

In the game, the price is up to a great effect - so as for most new products, for the current video cards, the speed of 60 FPS is already a whole non-destructive indicator, then by yourself, you will not need to get to the RC monitor by adjusting the frequency. I will try to see the video card (it’s good enough in the given period of time, as soon as the monitor is displayed), so as not to lower it to the low level of the quality of the gray graph. In addition, it seems, on RC monitors, that the real frame rate is 85 or 100 Hz, the image in the games will not be large, but all the same, there are video cards in the video cards - even the sound in the monitor.

Even the situation with films - I wish they didn’t set the video card, the frame rate of the film should be 25, maximum 30 frames per second, so that by itself it would increase the frequency of the frame rate of the monitor in the meantime. At the principle, in the context of the situation є: it is possible, when you create a frame, you can use additional frames for the program, so that you can use real frames for the average person, and insert them in the video - before the speech, such 60 Hz minimum doubles the frame rate in films, so that the margin is є.

Such a scheme is already implemented in 100 Hz televisions Samsung LE4073BD - a DSP is installed in the new one, which will automatically magnetize the intermediate frames and insert them into the video images and the main ones. On one side, the LE4073BD effectively demonstrates a smaller display in terms of TV sets, as such functions are not conceivable; To whom can I be honored, ale, as I will show you the way, more people will see the small monitor for a small monitor, and the new "mille effect" is more, more than that, among the films that are used to monitor such monitors in the RK

It’s obvious, besides these problems, to understand the essence of the technical transition - adjusting the frequency of the frame rate to 60 Hz means that you need to use Dual Link DVI on monitors with a separate building of 1680x1050.

As long as you need a short bag, there are three main points:

a) When the real hour of seeing the RK-monitor is less than 10 ms further than the decrease, even the effect is weak for ochivaniya through those who start to see the role of the eye's inertia. In the EPT-monitors, the black prominence with cadres is given a social hour "visvitisya", while the classical RC monitors do not have such an interruption, the cadres go without interruption. To that, for a decrease in the passport hour, as a result of the increase in the number of monitors, the increase in the number of monitors will not be correct, as it is to struggle with the energy of the eye. Moreover, the problem is not just RC monitors, but some active matrix technologies, for which pixels are displayed without interruption.

b) Naybіlsh promising Danian time of Je tehnologії korotkochasnogo gasіnnya lamps pіdsvіchuvannya, yak at BenQ FP241WZ - Won vіdnosno easy to realіzatsії (mіnusom Je lishe neobhіdnіst in velikіy kіlkostі that pevnoї konfіguratsії pіdsvіchuvannya lamps, ale for monіtorіv great dіagonaley tse tsіlkom virіshuvana problem) pridatna for all types of matrices and there are not many difficult to remove shortcomings. It is possible, if it is necessary to increase the frequency of the new monitors to 75 ... 85 Hz - albeit, perhaps, the virobniks will give in to the virginity of the problem. models of monitors with extinguishing signals.

c) Apparently, at a glance, there are a lot of cases in modern monitors (on any types of matrices) in full speed without any technology, so it is serious to check on the appearance of new models from the power of ...

Input Lag

The topic of capturing the image of frames in some models of monitors, but it will remain for an hour to be discussed widely on the Russian forums, but for the first glance it is similar to the topic of an hour when you see it - for the most part, this is a great defect. As if, with an astutely created frame, that it is necessary for the monitor, it will be displayed instantly, but the next hour is missed, then when you see the necessary frame, it will go through the video card in the monitor and a quick monitor of the next hour. Inakse vyslovlyuyuchis, monitor installed personnel buffer - extra RAM - scho zberigє one chi kilka frames; when a new frame comes from the video card, it will be written to the buffer, and then displayed on the screen.

It is easy to actively change the view to catch up - you need to connect two monitors (ELT and RK or two RK) to two inputs of one video card in the cloning mode, if you want to start a timer on them, to show a series of monitors. Todi, if one of them can catch a glimpse, the value of the timers on the photographs will be displayed by the amount of the time taken - at that hour, as one monitor shows the exact value of the timer, the other showing the same value, like the decal. To deny a reliable result, there are no fewer than dozens of photographs that have been taken from them, but they were obviously consumed at the time of changing the frames. Below on the diagrams, the results of such displays for the Samsung SyncMaster 215TW monitor are shown:

20 photographs were broken, of which 4 were clearly consumed at the time of the change of frames (on them two values ​​were superimposed on the images of the timers, one from the old frame, the other from the new), two frames gave a difference of 63 ms, three frames - 33 ms, and 11 frames - 47 ms. Obviously, the correct result for the 215TW є the catch-up value is 47 ms, which is about three frames.

The buggers are not a big step, I respect you, they are going to be published with skepticism before publishing on the forums, authorizing to talk about abnormally small or abnormally high visibility without the middle on these copies of monitors. As a rule, the stench doesn’t get enough statistics, but it’s just one shot - like you bachili vishche, on the edge of the shots there can be a vague “evil” meaning like vishche, so it’s lower than real, and what is more installed on the photo camera, there’s more so pardons. To reject real numbers, it is necessary to shoot dozens of two frames and vibrate most often to create the value of the capture.

However, everything is lyric, to us, the buyers, malotsikava - well, before buying a monitor in the store, you will not be on a new timer for photographing? For the butt of the clearest guesswork, the SyncMaster 215TW іf just 47 ms - a monitor with great values, so it’s a vibe very clever.

It’s possible to look at an hour 47 ms from a glance at the quickness of a human reaction, to achieve a small progress - it can be done in an hour, if a signal is needed to increase the price of the brain to the joints along the nerve fibers. In medical applications, such a term, such as "an hour of downtime of the sensorimotor reaction", is the interval between the appearance of which it is possible to reach a signal that is simple for processing a brain (for example, lighting a light bulb) and reactions (for example, pushing a button). In the middle for a human being, the PSMR hour becomes close to 200 ... 250 ms, which includes an hour of re-staging the story and transmission of information about it to the brain, the hour of information being sent to the brain and the hour of transmission from the brain to the mind. In principle, even in the context of the figure, the catch of 47 ms is not great.

With special office robots, it’s just hard to catch it. You can always start to wrap up the difference between the teddy bear and change the cursor on the screen - even the hour itself of the brain worming down and linking one by one So what about a simple reaction is not going to be, but it means that the hour of the reaction will be longer, not for PSMR) is so great, but 47 ms appears to be an insignificant value.

However, on the forums there are a lot of people talking about those who, on the new monitor, the cursor is seen as "vatyany", the stench is important to use the small buttons and the icons for the first time, and so far - and wines are in the eyes of everyone, as in the old monitor presence on the new.

In an hour, a lot of people change over to the new great monitors, either from 19 "models with a separate building 1280x1024, or from EPT monitors. For the butt, transition from 19 "RK to guessing 215TW: the space is divided horizontally by approximately one third (from 1280 to 1680 pixels), and this means that to overshoot the cursor of the bear itself to increase the size of the bear mind, well, the working man called that the adjustment became unimportant. The axis is here and there is a sense of "power", the ability of the ruchs - try on your stream monitor in the driver settings, change the cursor to a third, edit the same as you see it.

Equally the same і of misses on the buttons for the monitor change - our nervous system, as it does not cover up the screen, is also necessary to catch the moment "the cursor reaches the button" and send a nervous impulse to the finger, when the button is pressed on the left ... as the cursor is from the pіde button. To that, the accuracy of hitting the buttons is just as accurate as the number of rucks, if the brain is aware of the fact that the hand is moved, as well as the appeared itself on the required buttons. Zrozumіlo, with a change and permission, and the physical size of the screen, all the vitality appears absolutely marnoy - the brain is brought to the sound of new minds, even the first hour, as long as the old prompts are heard, and the buttons appear. Tilka zatrimka, pummeled by the monitor, there is no time for the call. As soon as you know it, you can reach the same effect, just change the sensitivity of Misha - if you change it, you will “skip” the buttons you need, if you change it, press the cursor, do not use it. Zrozumіlo, in a dozen hour the brain will adapt to new minds and again you will read the buttons.

So, having changed the monitor to a new one, with a separate building, like the size of the screen, but rather quickly, do not rush to go into the adjustment of the mischief and the three to experiment and experiment with her sensitiveness. If you have an old misha with a low optical resolution, then we will not be busy and think about buying a new thing, more sensitive - it will collapse more smoothly when high quality items are installed in the fixtures. The truth is, on the basis of the new monitor of Vitrat, they have taken 20 dollars for a good Misha, not the same ruin.

Otzhe, from the robot we rose, the offensive point is the file. Theoretically, the problem here can be detected through the rosynchronization of the sound (like where it is without pickup) and the image (like being picked up by the monitor for 47 ms). However, having experimented in a video editor, you can easily get up, but people will help to syncronize in films when the growth rate is close to 200 ... 300 ms, so that they have developed more, so the monitor doesn’t look good. Todi yak, 47 ms - just a little more than the period of one frame of the movie (at 25 frames per second, the period is, apparently, 40 ms), note such a small difference between sound and images.

I, nareshty, naysikavishe - іgri, one region, in which I would like to see some problems, it can be brought in by a monitor, maybe a value. Wow, demand, respect, I’m so quiet, I’ll discuss the problem on the forums and here it’s overwhelming and overwhelming - for more people and in a lot of people and in a big way, I don’t play the same roles. Mabut, behind the blame of the situation, if in rozrahovaniya on a lot of koristuvachiv "shooters" and your opponent immediately hit one one - this kind of quick reaction will have a role to play, and you will be able to catch it in 47 ms. If you are the enemy, and so keep in mind for six seconds, you will not be able to hide the situation.

At the same time, it means that picking up a monitor doesn’t add to the accuracy of focusing in games in the FPS genre, but to the accuracy of passing turns in auto-races ... to push the button "fire" immediately at that moment, if you aim to target the enemy, then you will be able to adapt visibly to the point of mind, if you need to give the command "stamp!" at that moment, if he had aimed at the enemy, he had not yet worked. To that, as if a little bit of triviality is not too trivial, it’s all-in-all, it’s brainwashed by Troja. The new monitor you are welcomed to be unmanageable.

I, nareshty, I have already developed a message on the forums about those who, on the new monitor, were unhappy with gratitude in іgry through the woeful eye-catching, which was produced as a result before the old man, having outdone the new monitor at 1280x1024 Thinking about those who are old video cards in such a permissive way not really smart. So, when you read the forums, be safe - as a rule, you don’t know anything about the level of technical literacy, but you can’t write that, and you cannot say in advance, because the words that are obvious to you are so obvious to them.

To go over the situation with the negotiations, the monitors are also taken care of two more moments, such as in this world of power of large people. In the first place, there are a lot of people who are mentally smart, to the superciliously foldable way of explaining simple appearances - it stinks more beautifully, but a point in the sky є a UFO, and not an extraordinary meteorological balloon, but a miraculous meteorological indicator on the thousands of NASA photographs, there is not a lot of information about a thousand , but people didn’t fly to Misyats, and so didn’t. Vlasne, whether it’s a Lyudin, as it’s a smart way to explain ufologists and other simple organisms, tell you that there’s a large number of such names, which are the inheritance of not the style of the daytime of simple “earthly” folds. ... It’s not a wondrous analogy between ufologists and buyers of monitors, ale ostanny, after drinking at the forum, it’s often like this - you don’t look at the smell of it, but when there’s a lot of change, you’ll be able to do it. -yakh zatrym, the stench immediately go to the agreement, as there is insignificant zatrym in 47 ms injectedє on the mouse cursor.

In a different way, people are shy to self-awareness. Try taking two dances from different types of beer, both cheap and expensive, pour the same beer in them - the absolute majority of people who tried it, say, that the beer tastes better in the dance with the label of an expensive sort. Seal the labels with impenetrable tape - the dummy should be distributed trivially. The problem here is that our brain cannot abstract away from all the different factors - if we need a way to pack, we can also fix it so that we can check the best quality in place of the packaging process. To fight against cymbals, all serious sub'active tests should be carried out according to the method of a slice test - if all the tests are done, go to the smart numbers, and should take part in the test experts until they know it,

Approximately those same see і with the topic of taking over the image, before discussing it. Lyudina, I only bought a new monitor, if I go to the forum on monitors, I see a lot of monitors, among other things about the coverage, in which they talk about “woolen rucks of mischief”, and about those monitors that are grateful rich zhakhiv. I, lightly, there is a bunch of people, how to blast, how to smell the smell with your eyes. After reading everything, people went to the store and started looking at the monitor, how to trick, with the thought “here I’m going to catch it, people її bach!”. Zrozumilo, after a dozen hour, I’m fixing it myself - more precisely, I’m going to bash it - if you want to turn around in the store before you write to the forum “So, I’m surprised at the monitor, right є catch up!”. There are a lot of cool messages - if people write directly on the screen, “I’m already sitting at the monitor, but just at the same time, after reading the forum, I’m banging on the new screen.”

For the first time, the popularity of the video clips on YouTube was taken away, in some of the two monitors (operating in the extended desktop mode) like a bear pulling up and down, but it’s vividly evident that it’s very obvious. The clips, snappily, beautiful, ale ... see what they are: a monitor with a 60 Hz rozgortkoy signal to the camera with a 50 Hz power matrix, instead of taking a video file from a 25 Hz frame rate, upload it to YouTube, which can be easily redone , without telling us about the price ... Yak vvazhaєte, if all the tsikh repetition from the original has become overwhelmed? On my dummy, no worse. When I tried to look at one of these videos frame by frame (when I took it from YouTube and when I saw it in a video editor), I showed it in a particularly vivid way - at that moment, the development of both two images monitors would be synchronized more often than not. ... Zagalom, new confusion, bezgluzdny і merciless.

Otzhe, brutally short visnovok:

a) In the case of monitors, the reception of the image is objectively present, the maximum value is fixed - 47 ms.

b) It is unwise to mark such a magnitude as a sinister robot, or a film. In the games, you can be in the act of doing things for the kindly trained gravers, but in the majority of people, and for the majority of people, it is uncomfortable and in the games.

c) As a rule, there is discomfort when changing the monitor to a model with a larger diagonal and thinning health due to lack of fluidity or sensitivity of the mischief, lack of video card speed, and also by changing the size. However, there are a lot of people, after reading the forums, overwhelmed by any discomfort at the new monitor to problems due to the image.

You can say it in two words: theoretically the problem is іsnu, that її practical meaning is greatly overdone. The absolute majority of people catching up at 47 ms do not mark any nicholas or anywhere, not even apparently about the lesser value of the catch.

Contrast: passport, real and dynamic

Mabut, firmly "the contrast of a good EPT-monitor is more, less contrast of the RK-monitor" ... Hi, I don’t get to increase the price of solidity, it is important to make those who are wonderfully back at their eyes, navigate sitting behind the new S-PVA matrix with a passport contrast ratio of 1000: 1.

Passport contrast, as a rule, is seen by virobniks not of the monitors themselves, but of the RC-matrices, on a special stand, when a singing signal is given to a singing signal. Vona dorіvnyu vіdnoshennyu rіvnya bіlogo koloru to rіvnya chorny koloru.

In ready-made monitors, the picture is before it starts to speed up, so that the level of blackness begins as the characteristics of the matrix, and the first - in one - is adjusted by the monitor itself, in front of the models, because it is regulated by the matrix, and not by the lamps. At the same time, the contrast of the monitor can appear lower, lower than the passport contrast of the matrix - as there are no accurate adjustments. A good look at the effect allows the Sony monitors, but there are two controls at once - the matrix, and the lamps - they have more than 50% of the black color quickly transform into Syria.

Here, I would like to once again mean that a thought, not a passport contrast, can be improved for the display of the quality of perception - and for that reason, it’s not enough to install such hard lamps in them - it’s not hard to use them. With an increase in the quality of education, such as the level of the white, and the level of the black grow up the same speed, the same, the same quality of performance, like the contrast, does not change. It’s unwise for a rakhunok to deprive you of the growth of a white color, not to an increase in a black color.

However, all the same, it was said more than once before, too, let's move on to looking at the food.

Without question, the passport contrast of current RC monitors is still lacking in visibility, but successfully compete with good EPT monitors for this parameter - it’s still nice to turn on the screen, to look like a picture with a chorna. And more often than not, the victorious monitors are not in the tempera, but are called upon to be found in the daytime illumination, in order to finish the bright ones. Obviously, the contrast is real in general, but we will be encouraged to see it from the passport, from the laboratory, to the power of the monitor's screen.

Vishche is represented by a photograph of two monitors, which stand on a hand - the EPT-monitor Samsung SyncMaster 950p + and the RC-monitor SyncMaster 215TW. Insult vimkneni, zvnishnє illumination - zvychane day, at the frown day. It is good to see that the screen of the EPT-monitor, when illuminated, does not just appear to be light, but rather to light up the screen of the RK-monitor - a situation that is opposed to the one that is spared in the dark when the monitor is turned on.

To explain the price is even simpler - a phosphor, which is vikorized in electronic exchange tubes, is itself by its very own light-gray color. To darken the screen, a toning plaster is applied on its slope - this is how our luminophore goes through the luminophore once, and the luminous light goes twice (the first time along the way to the luminophore, the other time, having seen the window through the luminescent light) , then the rest will relax with a little more, lower first.

Tim is not the least, the black screen doesn’t come out on the ELT - the world of lowering the transparency of the luminophor is brought to the world of lower vision, and the luminophor is also weak. And the quality of the EPT is interrupted by a modest amount of money, so when the great malfunction of the electronic beam is too much of a problem, the focus, the image becomes unclear, will be affectionate. Therefore, the maximum reasonableness of the EPT monitors does not change 150 cd / sq. M.

In the RK-matrix, the radiant light is practically invisible, in none of the luminophores, only balls of the glass, polarizers and rare crystals. Obviously, although a small part of the light is seen to be seen from the outer surface of the screen, it is even more possible to pass through the middle and there will be destroyed forever. Tom, on the day of the light screen of the installed RK-monitor viglyadak mayzhe chornim.

Otzhe, when illuminated and available on monitors, the ELT screen is meaningfully bright, below the screen of the Republic of Kazakhstan. If we include offense to the monitor, then the RK for the lower passport contrast will take out a larger markup to the level of black, lower EPT - if you have a whole lot of fault, all one will get dark for the EPT. If we now close the curtains, "vimknuv" the daylight, then the situation will change to the opposite, and the big black color will be in the EPT.

Thus, the real contrast of the monitors is to be found in the newest illumination: what is it, the RC-monitors appear in the larger camp, to look at the bright light picture on them. At temryavi, navpaki, perevaga on boats ELT.

Prior to the speech, it is partly on the whole base of the garniy callous viglyad - take on the windows - monitors from the glossy surface of the screen. There is a clear matte finish that falls on a new light on all sides, a glossy image of a mirror is straightforward, as a special mirror - the fact that the illumination was not brilliantly illuminated without the middle, then the matrices are not brightly lit in the back It’s a pity, as soon as the illumination of the rapt was dull behind your back, the picture was definitely dull - a matt screen, as it was earlier, the light was more pronounced, but the axis of glossy looks like it.

You need to respect that not only LCD and EPT monitors, but also display technologies - for example, each Toshiba company and Canon have given us the closest possible contrast SED panel, 100 can be fantastic on them, in temryavi - absolutely black), in real life with a day of light, there will be victories as it is, like і EPT. They have the same luminophore that shines when it is bombarded with an electronic beam, in front of it there is also a black wash for toning, albeit in the EPT to change the clarity of the toning (because of the increased focus of the rose) then change the terms of life of cathodes-emeters.

However, for an hour, the model of RC monitors appeared on the market with superbly high values ​​of the declared passport contrast - up to 3000: 1 - and at the same time there is a lot of matrices, and monitors with larger numbers in specific. Explanation of the fact that so great for the worlds of the Republic of Kazakhstan, the meaning is not "special" contrast, but so called dynamic.

The idea of ​​a zagalom is simple: in any film, like a light stage, it's also dark. In both cases, our eye springs the brightness of the picture as a whole, so that, if there is a large part of the screen of light, then the black rhyvn in innumerable dark areas of great significance is not, but navpaki. To that, we are smart enough to automatically regulate the brightness of the picture. The very same automatic regulation is called "dynamic contrast".

The official figures of dynamic contrast are even more simple: the level of the white one grows at the maximum brightness, the level of the black one - at the minimum. As a result, if the matrix has a passport contrast ratio of 1000: 1, and the electronics of the monitor automatically changes the sensitivity of the display to each other, then the dynamic contrast ratio of the monitor is 3000: 1.

At the same time, there is a need for space, but the dynamic contrast mode is just for movies, and maybe for Igor - those, in the rest of the gravity, will want to see the lightness in dark scenes, and it’s easier to feel like it’s not. For a normal robot, the automatic regulation of the luster is stored from the image, which is displayed on the screen, not just a marna, but just a flick.

It’s zoomed, at the time of the hour the contrast of the screen - from the age of the white to the black - I don’t change the passport to the static contrast of the monitor, however, it’s just like it’s just that, in the light scenes, for the time being, it’s not all the more important That is, the automatic regulation of the brightness in the films is quite short and right, the enemy of the monitor with a slightly increased dynamic range.

Minus technology є depriving those who control the brightness as a whole for the whole screen, in the scenes, how to experience the light and dark images in equal proportions, the monitor just to play the middle brightness to the deyak. The dynamical contrast will not give anything, and on dark scenes with some small, even yaskravim objects (for example, there is no street with lichtars) - the spooks in the back will be dark, the monitor will reduce the brightness to the minimum. However, it’s like it’s said, through the peculiarities of our withdrawal, the lack of a little more useful and in any case, less contrast, not the lack of contrast of the monitors. Also, a new technology can be found in the bagaty of koristuvach.

Transfer of colors: number of hunting and light harvesting

Three more than two rockets in the statti "Parameters of modern RC-monitors" I wrote about those, such a parameter, like the amount of heat, for monitors non-stunted - just the fact that all monitors have the same kind of wines. Happily, since that hour the situation has changed for the better - there are no more models of monitors for sale from the colony hunters.

Otzhe, well, also the number of ohopennya?

Yak vіdomo, lyudin to bump light in the range of dovzhin hvil approximately from 380 to 700 nm, from violet to red color. Yak sensitive to the light of the elements, our otsi see chotiri types of detectors - one kind of sticks and three kinds of flasks. Sticks may seem sensitive, albeit they don’t let them grow up, they smell the whole range as a whole, which gives us black-and-white zir. The cones, navpaks, sometimes lose their sensitivity (and thus cease to be very good in the days), but with sufficient illumination, they give us a color-coded view - skin from three types of flasks, sensitive to a wide range of needles. If it’s in our eye to waste a little of a monochromatic light with a small amount of, say, 400 nm, then there is only one type of flasks on the new solution, which is suitable for the blue color. In such a rank, the appearance of flasks is approximately the same function as standing in front of the sensor of a digital photographic camera RGB-filter.

If I want to build for the first time, our color can be easily described with three numbers, skin types like red, green or blue color, it’s not like that. They showed the experiment, carried out on the cob of the last century, the processing of information with our eyes and our brain is unambiguous, and if we can describe the number of messages in three coordinates (red, green, blue), then there are no problems colors, which in such systems the meaning of the red one appears ... negative. As it seems, I would rather describe the human light in RGB systems - it’s unfortunate for the curves of spectral sensitivity of the older types of flasks.

As a result of the experiments, a system was set up, which would describe the entire range of colors that could be captured by our eye. The graphical representation was given the name CIE-diagrams and it was shown on the little one. In the middle of the farmed area there are all colors that can be seen with our eyes; the contour of the central region appears to be clean, monochromatic colors, and the inner region is apparently, non-monochromatic, right up to a large color for the sake of it is seen one kind of one, on the CIE-diagrams in the capacity of the point of the white call it as the so-called “point of the flat spectrum”, but the coordinates x = y = 1/3;

Behind the additional CIE-diagrams, be it a color that can be seen by the human eye, you can also indicate two numbers of coordinates along the horizontal and vertical axes of the diagrams: x and y. It’s marvelous, not the price, but those who, be it a color, can be used to create an additional set of decal monochromatic colors that have changed from the singing proportions - our eye is absolutely biased before that, which spectrum has really been consumed, deprive those, like the excitement of skin type receptors, sticks and flasks.

Yakby the human zir has successfully described the RGB-model, then for the emulation, be it from the windows, like only it could have pawed the eye, it would be enough to take three dzherels, chervonia, greens and blue, and the proportions of drinking. However, it’s like it’s said vishche, for the right reason, it’s more bachimo more than color, it can not be described in RGB, so it’s worth it in practice: three dzherels of small colors can be used, as colors can be rejected for those wines?

It’s even simpler and more accurate: if you put the points with the coordinates of the cich colors on the CIE diagrams, then everything that can be counted in the figures is located in the middle of the tricycle with the peaks in the cich points. The male tricycle is called "kolіrne ohopennya".

The maximum possible number of colors for the system is three basic colors, so the names are laser display (div. Vische on a baby), basic colors in which three lasers can be molded, red, green and blue colors. The laser has a narrower spectrum of vyprominuvannya, in a new sense of monochromaticity, because the coordinates of the basic colors are located between the diagrams. It’s impossible to win the name, beyond the cordon - it’s a non-physical area, the coordinates of the points at them do not reflect the current light, but be it a point in the middle of the diagrams before changing the area of ​​the current

You can see it well from the baby, you can see the laser screen, you can't see all the colors, you can hit the human eye, you want to reach the close one. It is possible to lose the amount of heat loss for a larger number of basic colors, but for the reasons of the hypothetical system, as it is possible “for a little while” to change the base of the coordinates of their then others are not realizable.

At the same time, it’s too early for us to leave behind the shortcomings of laser displays: we have no way of living, and those who do not show the amount of heat, but even much less laser displays are giving up. In addition, it seems, in real monitors, like in EPT, so in LCD (behind a vignette of some models, about which there are lower) the spectrum of skin from basic colors to reach a distant form of monochromatic - in the terms of CIE-diagrams, the middle means to top the tricycle Diagrams are closer to the center, and the area of ​​the tricycle can be changed.

There are two trikutniks for the laser display and so the titles of sRGB. If you speak briefly, then the other way is similar to the typical colonic hoarding of current RK-and EPT-monitors. Suma picture, why is it wrong? I'm afraid we won't get away with a clean green color ...

The reason for this is that there is a drop in RC monitors - in a small range of lamps, there is a lack of RC panels. Cold cathode fluorescent lamps (CCFL) are able to burn in the brightness of such fluorescent lamps.

In nature, give us a dash of light for us, give us a little bake, for us in front of our Sonce. The spectrum of vyprominuvannya of such a type is described by Planck's law, ale smarter - vín uninterrupted, suspicious, in all cases, and the intensity of vyprominuvannya on close occasions needs to be seen weakly.

A fluorescent lamp, like the іnshі gas-fired dzherela light, yes, the spectrum of lіnіyа, in which vypromіnіuvannya on a part of the dіllіnіk hvіlnіvnаlі, and the intensity of the dіlianok spectrum, as soon as one can be seen in one meter So, as our eye is absolutely insensitive to a specific type of spectrum, then from the point of view, from the Sonce, the fluorescent lamp gives absolutely the same light. However, at the monitor, everything appears cheaply foldable.

Otzhe, a splinter of fluorescent lamps, to stand behind the RK-matrix, to shine through. According to the zvorotny bik matrix, there are grates of rose-colored filters - chervony, green and blue - set up three subpixels. Skin filter viriza s іtla lamp and shmatochk to the spectrum, so that our smoothies are passed on - and as a memory, for rejection of the maximum amount of hughting, the shmotochka is guilty of being a man. However, obviously, at 620 nm, the spectrum of the lamp will increase in intensity ... well, don't mind 100 smart ones. For red subpixels, we put a filter with a maximum transmission at a quiet 620 nm and, when it comes, I can’t see the top of the tricycle hooded color, but lie neatly between the diagrams. Building b.

Luminophore to use fluorescent lamps is a daunting thing to finish, we cannot use a spectrum of keruvats behind our bazhany, we can deprive a set of luminophores from a given chemistry that is much less likely to be seen. And the most beautiful one in addition to being able to vibrate, has one more peak in its spectrum in the same 100 different units at the level of 575 nm (no more color). Our chervony filter has a maximum of 620 nm at a maximum of 620 nm at the point of a low transmission efficiency, well, let's say, for 1/10 of the maximum.

What does it mean? Even at the output of the filter, not just one day, but two at once: 620 nm with an intensity of 100 different units and 575 nm with an intensity of 100 * 1/10 є 10 smart ones. Zagalom, not so little.

In such a rank, through the "zyviy" peak at the spectrum of the lamp, so that it can often be cut through the filter, we decided to replace the monochromatic red color of the polychromatic one - the red one with the house of another. On the CIE-diagrams it means that the top of the tricycle of the colorah collapsed from the lower edge of the diagrams up the hill, closer to the most recent, changing the area of ​​the tricot of the colorectal.

Witness, yak vіdomo, brighten up once, smack it, and again, once in a while. Schob pobachiti is described in food, having turned up for help before seeing the physics with the plasmas of NDI Nuclear Physics im. Skobeltsin, and in spite of myself, the spectrographic system was automated. The project was designed to control the development of single-piece diamond floats at the LHF-plasma for the same spectra of plasmas, so it’s easy to use a banal RK-monitor there.

The system is turned on (the great and non-robbing black box is the monochromator Solar TII MS3504i, you can see its input port, but the optical system is fastened, the right-handed man can see the orange cylinder of the photo sensor locked on the top of the monochromator);

The input optical system is installed on the required height, and another key of the light driver can be connected to it.

I, nareshty, maєmo її in front of the monitor. The whole system is fooled by a computer, so the process of studying the spectrum across the entire range, how to trick us (from 380 to 700 nm) is completed literally in a couple of quills:

Along the horizontal axis of the graph, there is a score of hvili in angstroms (10 A = 1 nm), along the vertical axis - the intensity of the smart ones. For a greater degree of accuracy, the graphs of products from the colory are indicated to dovzhin hwil - yak їkh sprymayє our eye.

Yak old monitor, in this case, having played the Samsung SyncMaster 913N, reach the old budget model on the TN-matrix, but not the least significant value - the same lamps with the same spectrum, as well as stand in the new one, which are very rich in all other RCs monitors.

Otzhe, what bachimo on the spectrum? And the very ones that are described in the words of vishche: krіm three different high peaks, which show the blue, red and green subpixels, which are more likely to be seen in the region of 570 ... 600 nm and 480 ... 500 nm. The very tsі winі pіki and destroy the tops of the tricycle of the colіrny hunt far into the sky with the CIE-diagrams.

It’s smart, in the most beautiful way to deal with it, it can be seen from CCFL - and the actions of the virobniks have done this, for example, by Samsung with their SynsMaster XL20 monitor. At some point, fluorescent lamps are replaced by a block of greens, including three colors - red, blue and green (it’s the same, for that, when the light is not all green, it’s not all green. Skin іf svitlodіodіv іs an accurate, іvnіy spectrum, so it’s just to get rid of the swamp by passing through a particular filter and not a lot of breezy smogs:

Anything dear to wonder, why is it wrong?

Obviously, the darkness of the skin from the light can reach wide, it cannot be called strictly monochromatic, so it’s not possible to look at the laser display, but it doesn’t look like it’s smooth on the CCFL spectrum. de y CCFL bully zovsim zivi piks. It is also a tricky one, that the camp of the maximum in all three spikes of trocha was destroyed - and the chervonia is now closer to the edge of the visible spectrum, so it can be positively indicated on the colony hooded.

And the axis, vlasne, and the number of ohopennya. Mi bachimo, it’s practical not to look at the modest sRGB color space, but because of the hunters of the human eye, it is most powerful in the new guard of greenery. Then the number of XL20s is important to merge with sRGB - it is easy to buy more of the types of green and blue-green colors, as well as a large red color. Tse, zychayno, not a laser display, ale - the enemyє.

Whilst home monitors for children are not overwhelming. Navigate the SyncMaster XL20, a cob of sale as soon as this spring, almost $ 2,000 with a 20 "screen, and 21" NEC SpectraView Reference 21 LED, so it’s more expensive for a large amount of money - up to such prices for a large monitor tsi models in the first place and signs), but clearly not homemade koristuvachi.

Protest, do not fall into wisdom - and for us you are also hopeful. Possibly won in the appearance on the market of monitors with signals on quiet fluorescent lamps, a new luminophore, in a sort of smothering of peaks in the spectrum. While the lamps are not so good, like light bulbs, but it’s all the same to turn the old lamps over - without the feeling of them, the numbers of heat are located approximately in the middle between the models on the old lamps and the models of the old ones.

For the numerical measurement of the size of the amount of hunting, it was taken that a lot of hunting monitors were taken from one of the standard hunting; sRGB is even smaller, so it is a standard color for people who want to use it often to play NTSC. Great sRGB monitors may be 72% NTSC, monitors with rotating lamps - 97% NTSC, and monitors for light ones - 114% NTSC.

Well, are we given the improvement of the number of hunting? Vyrobniki monitors for the new monitors in their press releases, for the number of new monitors in the order of the old, just for the new ones, for the new ones, for the number of new monitors, for the time being hunting for old monitors. Ale, astonishingly, looking at all the press releases on your old monitor, if you don’t smack the prices, your monitor doesn’t think it’s all the same. It’s all the same, so the reportage from the show of color televisions on Chorno-Biloy will be amazed. If you want a virobnik you can see it - do you need to display new models in press releases?

In practice, however, the difference - I can’t say that it’s principled, but I can’t speak unambiguously about the corny of the models for the colossal hunters. To turn around in a very clean and bright red and green color - as many of the old robots do not need to go back to the monitors because of the old good old CCFL, since we want to be too old for some time. і greenery so і to become like a dark and fraudulent in a casual with a "light" monitor.

It's a pity that the expansion of the models with rotating lamps is still not needed, as it would have been - for example, Samsung has lost its SyncMaster 931C model on TN-matrix. Obviously, budget monitors on TN may not have an increase in the amount of hunting, it is unlikely that such models for robots with a color can be used through the door to look around. However, all the main types of panels for RK monitors - LG.Philips LCD, AU Optronics and Samsung - are already ready for S-IPS, MVA and S-PVA panels with 26-27 diagonal and new lamps.

The perspectives, mindlessly, have lamps with new luminophores more and more to remove the old ones - and we will see them for the modest sRGB storage, for the first time in the entire hour of the new color computer monitors.

Color transfer: color temperature

At the forefront of the distribution, I zgaduvav side by side, so that the understanding of the "big color" sub'actively and lay down all of the most recent minds, at the same time I wanted to criticize the topic of three reports.

Otzhe, whichever is a standard white color, for the most part, it isn’t simple. You can take a flat range for the eye (that is, for those in the optical range of intensity on all levels of the same), but there is one problem - in most cases for the human eye, it is cold, but not very cold. ...

On the right, in the same way as the camera itself can regulate the balance of the white, so our brain regulates the balance for itself as a result of new illumination. The light bulbs are fired up in the evenings at home, we will not be able to create a light bulb, I wish that the same lamp is lit in a light, fine, sleepy day, and it looks like it’s already called a zhovtoy - that, in both cases, our brain will light up the balance. ...

The required amount of color was taken to be understood through the understanding of the “color temperature” - the temperature, until it needs to be heated, is absolutely black, and the light, which can be taken by it, looked at the necessary rank. For example, the surface of Sontsya has a temperature close to 6000 K - and the temperature of the sleepy light on a clear day is about 6000 K. the temperature is cold, because we are colder to build a light, so in the new one we can fix the blaky toni.

For dzherel with a linear spectrum - for example, the CCFL viscera - an understanding of the color temperature will become clearer, that is why we will be able to get rid of the suspicion spectrum of absolutely nasty body, it is rather savage, unforgiving. So, it’s in this way that it’s possible to get rid of the spectrum with our eyes, and when we adjust the color temperature to adjust the color temperature, we can use the clever characteristics of the color, like in the eye.

In the case of monitors, the temperature can be adjusted from the menu: as a rule, there are three choices of values ​​(for some models - more) and the possibility of adjusting the basic RGB colors. It was not handy in the context of EPT monitors, the temperature itself was de-adjusted, and not equal to RGB, alas, unfortunately, for RC monitors, except for some expensive models, the de facto standard. The meta of adjusting the color temperature on the monitor is obvious - so as it is easy to adjust the balance of a white vibration, the monitor needs to adjust the color temperature so that it doesn’t have a blue color.

It’s even more a pity for the victories that the temperature of the monitors in the bagatoh monitors has a high temperature, but the balance is very different from the old ones - it’s obvious that the old ones are not even cleverly understood, because I’m not talking about the balance too much. it will be correct. And in bagatio monitors for young ages, the overall balance also appears to be smart.

The picture is focused on the screen of the ASUS PG191 monitor, on which there are some blue squares of the picture - more precisely, three versions of the picture are shown, folded at once. In the first of them, the balance of the gray references to the extreme (fourth) square, in the other - in the third, in the last - in a different way. It’s not possible to say about one of them, it’s right, but the solution isn’t right for all the stinks, it’s not to blame for the color temperature of the monitor. ... The situation is corrected by a device calibrator - rather than a monitor.

For a number of reasons in the skin and from the articles for the skin monitors, I will bring up a table with the results of the visualization of the color temperature for some of the young women of the old - and as the smell is strongly perceived in one image of one monitor, while the image of the monitor

Ergonomics of working space and adjustment of the monitor

Unimportant for those who are directly related to the parameters of monitors, the topic is not important - at the end of the statistics, I would like to look at them, more, as a practice, among people who have especially sounded before the EPT-monitors, the recording process viclicati Problems.

First, roztashuvannya in the open space. The monitor is guilty of rooting out of the hands of the people behind him, maybe three more people - at the vipadku, as the monitor is a great deal of the screen. Put the monitor back, it is not so close - if you are looking to buy a model with a small pixel size (17 "monitors with a separate building 1280x1024, 20" 1600x1200 and 1680x1050, 23 "for a separate building that 1920x1200 is busy ...) ... As long as you have such a fight - it is more beautiful to be surprised at monitors with such a small building, but a larger diagonal, that from those who come to fight it is not necessary to have a large scale of fonts in the operating system of Windows application programs give you results.

The monitor's position in the ideals is guilty of being adjusted so that the upper edge of the screen is on the edge of the eye - it seems to me when the robot looks like it sits down, ). At budget monitors, use 20 "and 22" models, to pick up deliveries without adjusting the height - if you have the ability to vibrate, more beautiful than a unique model, and in monitors, from adjusting the height, there is a range of adjustments. Whilst, even more modern monitors allow you to take from them a small delivery and install a standard VESA-bracket - if only you can quickly, if a good bracket doesn’t deprive you of the freedom to change the screen, you can just hang on from zero to the top of the table.

An important point is the visibility of the working mission. It is categorically shown behind the monitor at the base of the temperature - a quick transition between the screen and the dark smoldering eyes. For a glance at films and igor to fill up a small background, for example, one real or constant light bulb; For robots, it is more beautiful to organize the illumination of the working mission. For illumination, it is possible to fire up lamps or fluorescent lamps with an electronic ballast (like a compact cartridge E14 or E27, as well as a portable "tube"), and the axis of the lamps of this light with an electromagnetically high frequency requires a high frequency tobto. 100 Hz, the system can be interfering with the rozgortkuyu or vasnimmerykhtinnyam lamps to the monitor, but sometimes it doesn’t seem to be effective. The great office workers have blocks of light bulbs, lamps in some kind of flicker at the junior phase (for example, when switching on the new lamps before the lower phases of life, or for setting the phase-lasting values), At home minds, there is only one lamp ringing, there may be only one way to fight with mechtinnyam - vicarious lamps with an electronic ballast.

Having installed the monitor in the real space, you can connect it to the computer and continue to install it in the virtual one.

RK-monitor, on the vidminu from the EPT, at least one separate building, in which it is good. In the case of the permission of the RK-monitor, it’s nasty - it’s more beautiful to put the first call in the video card settings right away. Here, obviously, you need to think about the need more than once before buying a monitor, if you don’t need a separate building of the other model, go back to a great or too small - and in case you need a quick vibrate model of your plan, ...

The frequency of the cadre rozgortka at everyday monitors, behind the great rakhunk, one at all - 60 Hz. Unimportant on the formally declared for buggy models with a frequency of 75 Hz and a frequency of 85 Hz, when the monitor is installed, the monitor's matrix will sound the same at a quiet 60 Hz, and "play" the frame of the monitor's electronics is simply displayed. There is no sense to chase high frequencies: on the view of the EPT, on the RK monitors, there is no big deal.

If your monitor has two inputs, a digital DVI-D and an analog D-Sub, then for a robot you should be quicker - I’m not just letting a picture at great permissions, but I’ll ask you to adjust the process. If only analogue input is used, then if it is connected and established as permissible, it will display more clearly the contrast of the image - for example, the side of the text - and reconversion, to the extent that there is no incomprehensible artifacts in It’s like it’s like it’s going to be - it’s enough to press the auto-start button on the monitor; For some models, won’t turn on automatically when there is a change in the size of the building, even a smooth, non-contrasting picture of the working Windows desktop for a successful auto-adjustment, do not expect it to be launched again. If you connect to the digital input DVI-D, there are no problems, so if you buy a monitor, you will be more respectful for the set of obvious inputs and for the transfer of models with DVI-D.

Practically all modern monitors can be standardized, but they give even higher brightness - about 200 cd / sq. M. Such a brightness is suitable for a robot on a sleepy day, or for looking at films - but not for a robot: for a normal, typical brightness of an EPT monitor should be close to 80 ... 100 cd / sq. M. To the one who needs it, it is necessary to create a new monitor for the inclusion of a new monitor - to raise the bazhan's quality. Head - robustness without time, do not revert to the ideal result in one ruch, and more do not rewrite yak on the old monitor; The problem of a polarity is that, for the eyes of an old monitor, being able to accept it means not finely adjusting that high quality of the image - but depriving those who your eyes made a sound. Lyudina, who switched to a new monitor from the old EPT from the pipe and the dark images, there is a good chance that you can save money and readiness - if only through a month in front of him there is no way to put the old EPT in front of him, now there is no the picture is dark and dark.

To that, if your eyes perceive discomfort with a robot with a monitor, try to change the color and contrast, try to change the color and contrast, try to change the color and contrast; Such a snake to the eyes is an hour for those who zviknuti to the picture.

In principle, it’s a good welcome, so it allows you to quickly adjust the quality of the RK monitor to an acceptable level: you need to put a hand on the screen with a sheet of white paper and adjust the brightness and contrast of the monitor so that it’s clear on the sheet. Zrozumіlo, tsei priyom maє na uvazі, how your work is kindly illumined.

It is also possible to experiment with the color temperature - in the ideal, the color temperature is the same as the color on the monitor screen. However, it’s worth noting that it’s in the form of new illumination, so that the monitor can be adjusted from the middle of the day, and there are a lot of models that are not well adjusted. Try changing the temperature to be warmer or colder, by triggering the RGB adjustments in the monitor menu - there can also be a positive effect, especially if the temperature of the monitor is warmer, due to cold temperatures.

It’s a pity that we don’t follow a lot of simple recommendations - and as a result, the forums pop up a lot of people in the discussion “Help you vibrate the monitor, because you don’t get tired of your eyes”, or even reach the end of the lists in the monitors. Panova, I have worked with dozens of monitors, and my eyes haven’t been tired of the overbudgetary models, behind the blame of betting, for those who simply have problems with the correct image, because of the curvature of adjusting the color. To that, the eyes will not start from the monitor - but from the wrong adjustment.

In forums, on the other hand, in some topics, it’s just to get to the point where it’s possible to talk over the low light bulbs (the frequency of this in the current monitors ring 200 ... 250 Hz, well, obviously, you don’t get caught up in the light) at the start, There is a high (for the gusto) contrast of the current RC monitors, it seemed like there was one topic that was discussed in the flow on the third line of the spectrum of lamps. Witness, tse, to be built, is already a topic for the latest statistics, pershokvitnevoi ...

I don’t get stupid.

Practically at any great hemstore electronics store is presented couple hundred TV models. It’s very easy to get out of the way. In order not to waste on tricky marketers and selling sales consultants, you will need to see all the minuses of this model a mile away.

Get involved in the theory and revise it in practice, helped the experts of the company TP Vision... Dyakuyu for the report that korisna іnfu, lads!

We tried to solve the main problems and formulate home recommendations to be involved in the process of choosing a TV viewer.

Influenced Mystsya

Cheaper display panels

Display panels of current RK-TVs are not deprived of diagonal and responsiveness. Rizna herself robot technology rіdki crystals. Moreover, they are important.

* cl_cable

They did not supply, why two televisions with the same diagonal can be seen. u kilka raziv? I will not stop the role of drawing old display panels. TN matrices are developed all the way up, applied by VA and IPS technologies. Ale dermal they have their passages and shortcomings.

Hour to vidguk

Three of the theory.

The hour of seeing is the price of quickness, with the help of the RK-comrade, it’s good to change the steps of vision, to shape the image.

* Tobto, like a quick change of color in one pixel.

Imagine in milliseconds dynamic stage... Hollywood Milyoni's contribution to specialty, why should you be amazed by the stage performances?

With a whole kozhen virobnik vvazha his own obovyazy vimiryuvati hour vidguk in his own way... For example, GtG (from gray to gray), BtW (from black to white), BtB or BWB (from black to big and back). There is no single standard, the same parameter can be adjusted between TVs of the same brand. It's easy to ask to turn on that very action scene on a number of models and respectfully admire. Above katuvati the seller for what kind of technology the virobnik freezes the hour to see, however, such information stinks just dumb.

Tricky sellers

Sellers may give povnuі I'll pick up information about the product. Фігня. Stink may you sell yogo. Tі, hto get used to getting along in soі cі navichki even rіdko.

What's the easiest way to change a customer in that one TV show is more beautiful than one? Easily. Draw up the contrast and intensity on the consumer goods. Yakshcho tse not breaking the virobnik. Do not mess with it, ask for the standard display mode on the original models.

Tupuvatiy Smart TV

I love the function of sales consultants. You can marvel at filmy online, without getting up from the sofa, spokusha a lot of Russian people. If the programs are installed in the TV screen, it is not impossible to start browser, as a rule, just ogidny.

Do you know I will need a web page on the Internet? Ok, I went through a bit of redirection and merge baneri. A couple of clicks? So, it can be stretched for a couple of quills, even a little browser on TV can boast a high speed of robots. As soon as the TV store is connected to the net, we will not use the Smart TV function.

Zhakhliviy interface

The logics of robots in the menu of the skin brand of televisions has its own. i don't expect gave... Rozdіli, scho dublіyuyutsya, the end in the end, the navigation is not handy - which only doesn’t create.

The implementation of the keyboard is also the same as the wicker. Type the text with a couple of buttons from the remote control - vitonchene pokarannya, inakshe.

Nemaє required roses

It’s simple: we take all our attachments, how to play on TV, and wonder, what roses are needed.

Yak bi is wrong, televizor - purchase dovgostrokova, it is necessary to think over beforehand how to connect to the future. Uninterruptedly, it was used to s'yasuvati the force of the struma in the USB roses, the nobility, who could see more hard drives.

Yak treba

• Matrix

Yak not have mercy on the matrix vibrator? You need to get enough for any purpose buy a TV show.

See the matrix. Old man TN matrix is ​​quite enough, as vikoristovuvati television yak monitor... For robots, that іgor is the same. I’ll show you the dynamic stage, before the same TV shows - one of those found on the market. Мінуси - vuzky kut I will look around that dark color, but not for designers and fans of garnishing cinema.

VA matrices are good for black color gears. The walk is beautiful, the picture is contrasting; I want the stench of shirshі, nіzh from TN matrices. Takі TVіzori pіdіydut team, hto love to sit on the sofa that Play on Xbox or PS.

IPS matrices may be a gorgeous transfer of colors and a magnificent cut to look around. The very ones, schob amazed at the gray All this can be rosted de-handedly. The head minus is a light black color, the picture is "flat".

Dialed. For the messenger, for the permission to leave, the fate is not varied, quite enough 1920х1080 pixels. 4K TV, crazy, I can show you a picture, ale leave there is practically no such content... Hiba scho YouTube. There is an option to buy such a one for the future, albeit the technological progress in the world is not a version, it is not a fact that the current 4K TV will be relevant in a couple of years.

Rozgortka. Often, it is possible to install the designated 1080p and 1080i (or 720p and 720i), carefully, Not one but the same... Rozdіlna zdatnіst is the same in both types, the ale type of rozgortka is іznіy.

• At 1080i (over a row of rows), the images are displayed last, in pairs and in unpaired rows. Yak naslidok is a drag on the boundaries of the object and tremtinnya frame, all the price is smoothed by programmed methods. The frame rate of your own is framed.
• At 1080p (progressive display), the images are displayed on the screen at once, the frame rate is visible.

Smily vibramo other option.

• Type of service

Even the RK-panel is not promising - there is nothing to show. In modern models, it is possible to develop more LED lighting (light-emitting diode), older CCFL (on fluorescent lamps), you can use it in the most affordable TV sets.

Lightweight (Edge LED) and kilim (Direct LED). The first vipad from the sides, and light from them rises through the diffuser. It does not allow the release of cool and subtle TV views, but it does not allow the local management of the audience to be nervous.

Якшо підсвічування kilimova, then dіodi roztashovuyutsya step by step, hunt the entire area of ​​the RK-panel. We can grow locally keruvati in groups of svitlodiodiv, without preserving the shortening of the transferred coloreds. There are a lot of glades near the walkers, and the TV set is old.

The difference in size is not so great. That is logical to send a TV screen with Direct LED.

• Vidguk

I wouldn’t bother you colori that the screen is different, the speed is low. call to nivets all are satisfied with the glance. For a set of criteria in advance, go to TV screens from TN matrices. Ale, yak already bulo said vishche, awesome picture. Compromise with the help of an hour to see how the images are implemented in VA matrices. IPS will go behind the scenes, as long as it is not a coincidence for the type of e-IPS and s-IPS.

For example, an hour to see a 32-inch Philips TV is 2 ms, a hostile result. You can marvel at the prefix. Bilya 20 thousand rubles in any electronics store.

• Belogo's balance

TB is guilty of making yakomoga less for the sake of vihіdny content. Only the axle, the lucky ones were not drawn in the way their displays met the color standards, but in the fact that they were sold. That is why there are “juices of blue” and “live chervoni” colors, which are lower than those of competitors. So that the density and the number of people of color are programmatically envious, the temperature is changed. In an amicable way, if the virobniks correctly set up their products, when they are displayed on the TV counter, they will show similar images.

The idea has been expanded that the Japanese and Korean companies often overpower the colors and burn the shit out of the mountain. The temperature of the image, as a rule, is lower than the standard 6500 K. more natural kolorіv that correct balance of the white. The stock is a 50-inch Phillips with VA matrix. Adequate balance at once due to the low hour of seeing the natural quotes. All that is needed is that the TV viewer will be surprised at the virtual. Price - mayzhe 45 thousand rubles.

• Smart Smart TV

The main point is explicitness sprite browser That is a rich assortment of supplements for online content. Moreover, for a comfortable surfing on the edge, Flash and HTML5 support is required. The interface is handy and intuitive. The Wi-Fi module will forgive the life of the team, who will get the darts. Well, I’m not critical.

Do you know? Yak option - sprobuvati Android TV... Є A hand-made store of adaptations, implemented keruvannya from a smartphone, the same browser is faster. This Android is embedded in the 55-inch Philips 6500 series. OS for tsomu televizorі - revised 5.1 (Lollipop). Ale 75 thousand rubles ask not for Smart TV. It’s just a great stylish TV set with twisting images, Ambilight for every need.

• Optimal size for the screen

There are no clear criteria for the selection of the TV viewer. It’s not a secret for anyone that if the gaze is far from the screen, then the diagonal is needed more. All runtutsya on special likenesses, altogether, the picture of the viglyadє is like this:

Coot will look around as important. The TV viewers with TN matrices are not suitable for virtual ones. Yaksho marvel at the side - the picture change its color.

• About 3D technology

If you vibrate falling on 3D-television - you need to be aware of the technology of transmission of stereoscopic images. Two main: active and passive. Skip required eyepieces.

With 3D active, the image is fed through on the skin of the eye with an even greater frequency, as it synchronizes with the frequency of television. Everybody has a headache. Then the picture will be displayed in the same way, if it is darkened. In the eyepieces, a shutter mechanism is inserted into the eyepieces, which alternately closes right and left. For a whole lot of demand, life was dying, which means that the eyepieces will take an hour to charge. At the set before the TV set, make one or two bets of such eyepieces, the solution will be bought in addition, and stand the stench decent.

In passive 3D, The image is taken in full, just the TV viewer made the picture with small kuts for the left and right eye. The eyepieces are simple and clean without batteries. Їхні лінзы - tse special filters, which take images only for the required cut. The head does not fall on the eyepieces with linear polarization, otherwise it will happen when you look at it, trim your head vertically. More beautifully, take the kit, which will adapt to circular polarization. It’s good, good fortune, ale the awesomeness of the image: the separate building of the mens, the dynamic stage performance, the mensha "glybin" to the 3D effect. Put the box with the TV set on the whole bunch of such eyepieces, blow it all over the homeland. That stink for sale cheap, to buy in addition is not a problem.

Bagato virobnikiv vipuskayut TV views with one guided technology. Є th vinyatka. For example, in the range of Philips there are models with active 3D, as well as passive.

DIAGONAL
Otzhe, first, how to quote you - the whole TV viewer, more precisely, the diagonal. Do not forget that in diagonal stores it is easy to see the eye through the great expanse of navkolo. And at the same time, the right choice is made for a diagonal screen, which is rich in comfort and hostility, as you can see through the glance. Traditionally, the size of the diagonal of the screen is measured in inches and is meant, for example, like this: 32 ”. Yogo awkwardly pererahuvati in centimeters: 1 inch = 2.54 cm. Diagonal to the TV screen of the TV operator obov'yazkovo can be displayed, as you plan to put it. The LG company promotes new models for any budget. For example, for a great virtual good, go with a curved screen, or a TV set with a diagonal of 84 inches. It is important that you, you, and your guests have lost their satisfaction with the images, right from the one from which you will be surprised. For the smallest, for the child's bedroom there will be an optimal TV view from the screen diagonal from 32 ”. The optimal diagonal to the TV screen, to the thought of the fakhivts, is to blame for about 3 times less for the visit, to which it is transferred. For an hour, I’ll look at the closest view on the TV screens on the screen. The LG TVs have an IPS matrix installed, which allows you to transmit images without creating original views, with the maximum readability and wide cuts.

EXPANDED TO SCREEN
Another important characteristic of any TV viewer is the centrality of the display to the screen . The quality of the image can be found. The screen of any kind of crystal, LED or plasma TV is stored in a series of pixels, called pixels, a number of which are called a separate building screen. There are two numbers that rotate around the viewer, the first is the number of pixels along the horizontal, and the other along the vertical, for example, 1920x1080. TB LG is rendered in a name-specific way. The visibility of the building of the screen allows the TV viewer to read the picture with a great number of details to see dynamic scenes every hour.
As many models previously missed out as the maximum distribution of HDTV (English "High-Definition Television"), then on this day LG TVs will be released already from the distributed building of Ultra HD (4K) broadcasts. The 4K Ultra HD format will preserve the memory accuracy, image clarity and visibility of details in most cases, but not on Full HD screens.

The LG company is to make innovative technologies available for the skin rescuer, so that the skin can become cold with its uncontrollable quality and unique design. For Kazakhstani residents, LG presents a wide range of 4K Ultra HD TVs, which allows the generation of vibrations as needed.

Models of the UB820, UB830 and UB850 (,) series with diagonals from 125 to 140 cm are the most affordable in the middle of LG 4K TVs. Yakісnі TVіzori LG tsikh gray mаyut all the main features, including the function of Smart TV and the new platform webOS, will be honored with the prestigious Red Dot Awards-2014 for the smartest corystuvachevі interface.

Ultravisoka rozdіlna zdatnіst dozvolyaє vivoditi on Screen chіtku picture Zi zberezhennyam usіh drіbnih elementіv i nyuansіv and vbudovana bagatokanalna system frontally spryamovanih dinamіkіv, permitted vіdchuti spravdі bearing-down sound, scho napovnyuє kіmnatu for bіlsh zahoplyuyuchogo pereglyadu fіlmіv in poєdnannі іz The images yak ULTRA HD.

SMARTTV
LG Smart TV allows you to easily connect to premium content from other providers. A simple and functional Magic Remote remote control for an hour and allow you to click, click, scroll, and speak with the remote control, so that you know who you want to hear the sound of movies, programs, TV shows and web content. Loan navigation in the least hour. In addition, Smart TV from LG has become more intuitive, no matter what. The new webOS interface allows you to customize your home screen in such a rank, so you can restore access to programs that you can use most often, and it is also easy to change between them, remembering what new ones are left. Deyaki models, for example, are equipped with a special re-conversion of 2D to 3D from LG, which is a new version of the video. Great realistic, spacious sound you will feel, if you will respect the model, it is equipped with Virtual Surround Plus technology. The whole thing is effective when it comes to enemies, so the sound is practically heard from the sides. Function of intelligent energy saving in the model to help you to help nature, changing energy conservation. This function includes the control of transmissions for regulating the quality, the function of displaying video for the production of only audio and Zero-mode of displaying, the function, as it is practical to display the TV, when it is working. The assortment of models, diagonals and unique functions is wide.

HOUR TO THE MATRIX
Well, is it the same hour to see what kind of indicators are injected onto the quality of the TV viewer? Hour to the matrix (English response time) - the hour that is needed by the monitor / TV / laptop users in order to change their color from the change of the image on the screen. An hour is seen in milliseconds, and in less than an hour, it’s more than an hour. For a comfortable look, it’s new, for example, there’s enough screen for an hour to see up to 8-10 ms, but if you plan to wonder if you’re looking at it, you’ll be grateful for the occasional game, then vibrate the model, as there is a minimal indicator. We'll paint for this year's day, mabut, you can name an hour in vignette TV sets, which is only 0.002 ms - the result in hundreds of times the indicator of light TV shows, as long as you allow the scenes to be youthful.

CONTRAST
Another characteristic of the TV screen, which is infused with the comfort when looking at it, is the contrast of the image, like the quality of the most beautiful picture to dark. The high contrast allows the development of more visual colors and details of the picture. High-quality television sets to display the standard technology with three sub-pixels, so that the number of transmissions is seen from reality. The LG Electronics company has broken the unique technology of the 4-color WRGB pixel for OLED TVs, as it allowed the production of realistic, readable and rich colors, making the image without contrast. The breeders of the uniqueness of the idea of ​​\ u200b \ u200bShodo the victorious sub-pixel of the white color LG OLED TV with a curved screen displays more realistic colors and accurate displays. The first OLED TV viewer in the room with a curved screen, a diagonal of 140 cm (model), with a revolutionary design, opening up a bit of a backlash in the picture before looking at it for an hour and allowing the contrast to contrast with the different people. In addition, all the remaining LG TV models are equipped with an IPS matrix. The breeders of the customary colorectal temperature will not take into account the naturalness of the appearance and the exact appearance of the coloreds, without any problems. Tsya rozrobka company LG allows you to enjoy the fair beauty of the image and the accuracy of the views across the entire screen, not importantly, when you look around you.

KUT LOOK
The brightness of the image can change drastically because of the fact that de Vie are sitting on the display until the screen. I’ll look around for an hour when I’m looking at the TV viewer - it’s tset at the top, when you can see the TV set without losing the quality of the image. IPS matrix is ​​a unique feature of LG displays. The image on the TV screen cannot be used to navigate in case of new influx, for example, in case of an onslaught or a postponement. IPS is a technology for displaying a matrix of a solid crystal screen, if the crystals are rosted in parallel, one to one at a time on a single screen area, and not spirally. The change in the arrangement of crystals made it possible to reach one of the main IPS-matrices - the growth of the cut around the angle up to 178 ° horizontally and vertically on the direction of the TN matrix. In practice, the visibility of the IPS-matrix from the TN-TFT-matrix of the field has been adjusted to a higher level of contrast for the practical presentation of the ideal image of the black color. The picture is read. Screens based on IPS do not work or reverse color, as long as it looks like it is falling down to cut. The picture will be clear that it is clear, I will make it to the robot in the Internet, and the video will be looked at. It’s a good idea of ​​the picture, it’s a big deal in technical light - the price of the first OLED TV set with a big screen. literally a new era for TV design. Smoothly vignut the screen of the innovative LG TV set to see the main picture before the hour, because the surface of the screen is clear from the eyes. We know the problem of creating an image and losing detail around the edges.

SOUND
The acoustic system is injected є practically in any day-to-day TV. Inexpensive TV models in buildings produce only monophonic sound and play one or two dynamics. More stuck in - equipped with a built-in stereo system, in which number of speakers can be from two to eight. The best audio technology is available on LG TVs. For example, the LG TV screens of the last generation from the series are equipped with audio technology from the reference “gurus” in the field of sound production - the harman / kardon® company. The harman / kardon® audio system delivers high-precision sound with high-pitched bass and wide dynamic range. Simpler it seems, the sound of the frontal dynamics will keep the space, I will increase the glaring glance at those that are seen on the screen. Still such an effect of presence can be seen only in the cinema. Dynamics distribute the sound directly behind the decilcom in a straight line, flashing 3D audio.

The LG company represents a great range of TVs: from the most popular to even the greatest, from those available to premium class TVs. TB LG can be found at great stores in Kazakhstan, trade fences "Technodim" , "Sulpak" , "Mriya", "Fora", as well as at the company store Lg in Almaty (st. Toli bi 216 B, corner of st. Rozibakіevva).