Firmware for xiaomi mi4 Installation of official firmware

lecture according to the establishment official firmware by Xiaomi Mi 4i (Ferrari).

Drivers and programs

Uwaga!

Instructions from the establishment

Zrobiti backup copies all the necessary data and files and save them on the computer, famous nose abo gloom.

Create in the root of the C drive: folder with "Android" im'am.

Get authenticated drivers.
Windows 7
Wait an hour to turn on the computer, write tampering with BIOS, press key F8. The menu “ Dodatkov_ options zavantazhennya "vibrate" Vimknennya obov'yazkovogo pidpisu drivers ". The whole method can be used not for the first time; command line from the name of the administrator and enter two commands:
"bcdedit.exe / set loadoptions DDISABLE_INTEGRITY_CHECKS"
"bcdedit.exe / set TESTSIGNING ON"
Windows 8
It is necessary to press the Win + I keys, press the Shift key and vibrate "Vimknuti"> "Override". If the computer is enabled, vibrate "Diagnostics"> "Advanced parameters"> "Enrollment parameters"> "Override". When locked, vibrate the mode "Vimknut obov'yazkovu reversal of the driver's signature" by pressing the F7 key.
Windows 10
Viber "Start"> "Vimknuti"> "Overwrite", then press the Shift key. If you are locked up, vibrate "Shock and usunity of faults"> "Additional parameters"> "Parameters of enrollment"> "Re-enablement". Then vibrate the item "Vimknut obov'yazkovu reversal of the driver's signature" by pressing the key F7.

Activate the item "USB service" and "Factory rozblokuvannya" on smartphones in the box "For rozrobnikiv" (rebuild in "Parameters" → "Dodatkovo").
Schob vidkriti Daniy rozdil, you need to go to "Parameters" → "About phone" and then click on the item "MIUI version".

Connect the phone to the computer using an additional USB cable and change the connection type from "Only charge" to "File transfer (MTP)".
It is recommended to use the original abo cable good quality and also USB port 2.0, sewing on mother's pay(For PC).

Open the command line and go to the folder Android with the command "cd c: \ Android \" (the command should be written without paws).

Perekonayte, scho the computer know pristry ADB.
For this, you need to enter "adb devices" at the command line. On power to the phone about the call about the ADB service on given computers it is necessary to press "OK" by selecting the item "Set the permission of your computer". If you can see the attachments, then the text "List of devices attached" is displayed, the list of attachments (for example, xxxxxxx device). If you replace "device" it will be written "offline" or the list will appear empty, you need to update ADB, change the driver / cord, change the USB port / computer.

Reload the smartphone to Fastboot mode.
For this, it is necessary to enter "adb reboot bootloader" in the command line, or to get it, then remove it from the key of Zmenshennya Guchnost. On the screen, I am guilty of being guilty at the captain-vushants.

Perekonayte, scho the computer knows when it is in the Fastboot mode.
For this, you need to enter the fastboot devices command. As soon as you see "xxxxxxx fastboot" the connection phone is correct. If you want to see "waiting for device" or nothing else - you need to reconfigure the USB connection or reinstall the driver.

At the command row, enter "flash_all.bat" to install the firmware from the views of all the data of the koristuvach, or "flash_all_except_data_storage.bat" for the firmware from your savings.
Check out the process of installing the firmware.

After a dozen hour, try to re-enroll yourself in the system and prepare yourself for a robot.
As soon as it did not become, it is necessary to enter fastboot reboot in the command line, or press the Umknennya button for about 10 seconds.

• submit

To get involved in the flagship of a Chinese virobnik, all the attachments, which go under the name Xiaomi Mi, can be used as flagships. One of the hottest smartphones in the line-up can be the Xiaomi Mi 4, which is not so distant in 2014. For the characteristics, the phone did not compromise the flagships at that hour - Samsung Galaxy S5, Galaxy Alpha, Nexus 5, LG G3, and so far, but at the same time costing them a little cheaper for the change of models, it was robbed by a great purchase. You can say that if you can find a phone at a time, it’s not much better for a modern budget, but in a way to find it more beautifully. Navit at a time, in 2018, the phone will be sold, I will remove the MIUI update, without pretending about custom firmware, middle and Android Oreo from the very same the last version 8.1. The first axis went so smoothly to those statistics - the firmware of Xiaomi Mi 4. I will install the firmware on the rest of the official version of MIUI 9.2 and tell you about the custom firmware and how to install it. We will cease to drag it out with the entry, and we will go over without prior to the instructions for the Xiaomi Mi 4 firmware.

Xiaomi Mi 4 firmware on MIUI official

It’s worthy of the Xiaomi company, because the firmware of Xiaomi Mi 4 є is even more forgiven by the process, so you can fit into it. Obviously, if you are in the first place at the computer and do not know what the driver is, then you don’t need to work on the axis like that at once, but if your computer is all right, then you are kindly requested. Firmware Xiaomi does not deprive you of an easy process, but of unification! Practically all Xiaomi smartphones are flashed with the same software and drivers themselves. Mi 4, as if it were the only Xiaomi smartphone, can be flashed to the MIUI office through the MIUI Rom Flashing Tool, or MiFlash is fast, and the program is even faster. If I want to, I’ll get up all required drivers independently and everything you want to get started is to connect the phone to the computer in fastboot mode and press the "Flash" button. One more clarification: the Xiaomi Mi 4 smartphone is not able to unlock the lock for firmware via MiFlash, but I will definitely speed up and forgive the process, so we can immediately go to the firmware. It only got stuck with the firmware itself, but for the whole it is necessary to switch over to the best of the firmware.

The process itself

To get a copy, we need to set the phone and turn it into fastboot mode, for which we need to tighten the live and sound buttons at once. When the phone gets locked into fastboot mode, it shows a similar image:

Connect the phone to the computer (installed via the supplied cable) and check on the phone by the system. When MiFlash programmed an onslaught on the "Refresh" button (seen by the news) and your device is guilty in the list of attachments.

Now it is necessary to update the firmware, but it will work through WinRAR program or 7Zip. Create a folder in the root of the C: drive and find the firmware. Copy to the address to the folder with the firmware that is inserted in the field, seen in blue color.

Now the onslaught is the "flash" button to download the firmware. The process can take up a few quilts, and after an attachment from 5 to 15 quills, you can get more patience.

Yak we could change, the process is even easy and doesn’t take a lot of an hour;

Custom firmware for Xiaomi Mi 4

Everything here will not be so simple, if I’m going to be able to explain everything in the most accessible way. It is necessary to add the archives to the root of the C: drive with the necessary tools.

It is necessary to start the phone in fastboot mode (live + down) and connect the phone to the computer.

You will need to flash a custom recovery for the collection, and for a lot of vicarists, you can use the Windows command line. You can start it through the "Viconati" program, for the launch of Win + R and enter "cmd". So yak necessary tools we are in the root of the C drive of the Android father, then we need to go there, and for the whole we enter the command CD C: \ Android

To reverse the connection of your smartphone, you can enter the command fastboot devices and your phone is displayed on the screen.

To flash a cover, you need to enter the command fastboot flash recovery recovery.img, de "recovery.img" - the name of the file from the recovery, which can be changed to your own.

For the installation of a custom recovery, it will be necessary to get a new one. For a complete jam, there is a button of soundness + і liveness.

For firmware in the recovery itself, you need to update wipe data, wipe cache and wipe dalvik cache, or if you want to install custom firmware in the Install distribution.

Yak, start the process of installing custom firmware, it is more difficult to install MIUI, and I would recommend you just install the MIUI version and do not fool around with custom firmware.

Detailed instructions from the firmware of the Xiaomi Mi4c smartphone to the new russified custom firmware from Google Play.

With firmware version 5.10.15, the cunning Chinese from Xiaomi have sent their firmware with a unique encryption key. First, to produce before that, through the standard (stock - mi) recovery, it will be stitched, in a disrespectful way, only the original English-Chinese firmware! When you try, flash through the new firmware - winikatime pomilka signature verification failed!

Custom TWRP Recovery Firmware

Blocking the driver for connecting the PC with Xiaomi phone Mi4c - MTK_USB_Al_0.9. 7, will be closed and then installed.

If you want to flash the Xiaomi Mi4c to a custom firmware, or if the firmware is Russified, you need to install a custom recovery in your smartphone.

Customized recovery TWRP_Recovery 2.8.7.1 and firmware MiuiPro or sMiui for Xiaomi Mi4c

Yaksho shho axis stock (original cover) for Xiaomi Mi4c - stock recovery Mi4c

Unzip the archive into a folder on the “C” drive.

Run CMD from the daddy (see the folder to save the recovery file, from the zipped shift key press the Misha button on the empty message from the daddy, open cmd here “see the command screen”) in Win 10 display the command view
Transfer the phone to the fastboot mode (on the screen of the smartphone it is guilty to show up at the vushants, which is to lag the android), for
Option 1: Pick up the phone and pick up the sound "-"
Option 2: Via a command (requires additional mode of charging via USB) - CODE “ adb reboot bootloader"That natisnuti" enter "

We are now flashing our custom recovery TWRP_Recovery 2.8.7.1, for which the code is written

"fastboot flash recovery recovery.img"

and press the "Enter" key, for which the process of flashing the Xiaomi Mi4c smartphone will immediately come to mind

Installing Xiaomi Mi4c Firmware

Have you downloaded the firmware? Yakshu ni, I will be blessed with the help of the instructions.

Copy of the firmware file for the puzzle about the smartphone.
We can enter the recovery in one of the ways.
Sposib # 1 Zatiskaєmo immediately the liveness button +, as soon as the MI logo appears, release. Zavanazhumos at the earlier establishment of the recovery.
Sposib # 2 Shukaєmo on the working table of the smartphone іkonku programs Updating, we go -> embossed three specks in the mountains (...) -> Vibiraєmo "Reloading in Recovery".

Vibrate Wipe -> Advanced Wipe і in the offensive wіknі you can see the check marks on the screen, forcing the robimo swipe to the right. Turning around in the menu head and go to Install. The top row has a vibrating place, denotes our firmware. "phone memory" or "SD card"
Push buttons "OK"

Today's smartphones are hard to come by without a basic warehouse operating system. The very great potential of the smartphone has been opened up, allowing people to be as smart as possible and dynamically working with straining attachments. Absolutely all smartphones are released from the conveyor, and the operating system is installed.

Coristors, which do not have a standard firmware, I might not be able to get my hands on, I can go to the computer with that clear set of driver programs. Firmware via MiFlash will help you not to update the internal warehouse, but fix a great number of problems, middle bootlups, post-systemic pardons and "ocegliy" apparatus.

Would it be necessary for mothers to install the new firmware?

• Computer for operating procedures Windows systems versions 7, 8, 8.1, 10, whether it is ;
• The program, for the help of which the firmware will be installed, will be installed - (you will need to install all the necessary drivers for the robot). You have a bulo installed old version, before the rise of new things, it is necessary to see the old.
• I will lock up the firmware, it will need to be installed on the phone. Vona is up-to-date, stable, and it exactly fits your phone model. The format of the firmware is ".tgz", if you have only ".gz", just change the format.
• Your smartphone, this model is not responsible for the Xiaomi Mi3 and the Qualcomm processor.

Installing MiFlash

Investigation of driver reconversions

For the correct interaction of the computer with the phone, it is necessary to have installed drivers on Windows. In order for the stench to be correctly installed in the system, on the computers it is necessary to install the function, so that the driver's information can be changed, so that the phone is installed - so the phone can be flashed without problems.

For Windows 7, reinstall your computer. Immediately after the BIOS has been installed, you have to quickly press the F8 button (you can have one key), in a short hour a list of additional commands for the installation of the operating system will appear. At the distributor "Dodatkovi options zavantazhennya" vibrate "Vimknennya ob'yazkovogo pidpisu drivers".

Remember the whole croc, so that when you are prompted to diagnose problems with the driver installer, in the command row launched from the name of the administrator, enter and run the following commands one by one:

bcdedit.exe / set loadoptions DDISABLE_INTEGRITY_CHECKS

bcdedit.exe / set TESTSIGNING ON

For the skin command, reconsider the display of the computer, but the Viconan's command is successful, then the computer is displayed and removed.

Have Windows middleware 8, 8.1 and 10 stamp on the keyboard with the Shift key; Go along the road, pushing on the screens of the buttons "Diagnostics", "Additional parameters", "Parameters of entailing", "Re-entitlement". The system will be re-enrolled, at the appropriate screen with the F7 button, the option will be re-enqueued "Vimknuti obov'yazkovu rewrite the driver's signature".

Launching MiFlash

1. Lock the MiFlash program. The archives need to be packaged in advance, a folder has been prepared with the same name on the way "C: Android". In order to unique syntactic pardons at all the nobles, pick only Latin letters, some Cyrillic, punches and minimal symbols.
2. Pidberit the firmware, if you need to install it. Add її to your computer and unpack the archives from the folder.
3. Run the vikonuvanny file with programs. Wait for the cob to install drivers in the onslaught on the button "Next" (as the installation is not considered a proper rank, div. Point 1). To get the download for a day, the docks of the files are unpacked and integrated into the system. If you know about the success of the installation, close the program window by pressing the "End" button.

Connect the phone to the computer

1. Now let's move on to the phone. Podpayte about those, which will be charged by 50%. Recognize it in a very special way, then switch to the "Fastboot" mode - to remove it with a special combination of keys, pressing down the button for turning on that goydalk down. In a short hour, the picture will appear as a rabbit at the Vushantsi.

1. If the phone is in this mode, connect it to the computer. Duzhe bazhano vikoristovuvati provide, which is the set with the phone - to ensure the most stable connection. For the sake of the whole day - it is just to take the lead. Insert the external plug at the Xiaomi attachment, and insert the last plug into the USB 2.0 rose on a laptop or a computer.
2. Run the command line in Windows from the name of the administrator. For the help of the command cd c: \ Android, go to the director, which was set earlier when the miflash programs were installed.
3. Reverting the "friendship" of the computer and the phone - the fastboot devices command is entered into the command line, when it appears, it is similar to xxxxxxx fastboot (win means that the synchronization was successful). It’s written on the screen as “waiting for device” - it’s necessary to reconfigure, if they didn’t shut up the phone, and also to reconfigure the cable. Yak option - reinstall the driver.

1. With the fastboot oem reboot-edl command, transfer the smartphone from special mode"Emergency Download Mode". We have heard for an hour about the appearance of a new add-on on the computer. Synchronization of devices is finished, you can start without prior to firmware.

Phone firmware

1. I know the MiFlash program. Click on the "Refresh" button, then for help ".." show the program folder, where you have installed the required firmware.
2. It is necessary to vibrate, so that we will take the gifts, appear on the phone, and see everything again. As a rule, another option is recommended, so that the firmware is installed correctly. Press the button "Flash all except storage", then download the data on the phone, for a new format, vibrate "Flash all". Write to the vibration to draw "Flash". Let's use the Vicon's program for vibran diyu, and the firmware of the Xiaomi Redmi 3S (or something else).

1. The performance of the installation of the operating system is based on the size of the firmware itself, the performance of the cable and the performance of the memory in the middle of the device. Anyone who is completely normal will have vitrati for an hour from 10 minutes to 1 year.
2. For the completion of the robot MiFlash phone self-reaffirmation. Iakshcho automatically re-entangled not bulo viconano, at the command row of windows run the fastboot oem reboot-edl command, or press the power button on the phone before the firmware sign appears on the display. Then carefully pull out the cable from your smartphone.
3. After the update of the new firmware, the phone will be intangible for the first time. Fallow technical nuances OS, custom logo can be displayed from 5 hilin to pivgodini. With vinyatkovy vipadkas you can try to conceive for 1-2 years by connecting the phone to the charger.

Any problems

As soon as a tricky hour of winter changes on the screen is impossible, try to remove the battery for 20-25 minutes, then insert it back and start the smartphone again. If it didn’t help, let’s add it for a trivial hour, so I’ll have a new battery (don’t forget about the phone for such a vigilante, it’s not more than 4-8 years old) serious problems due to the battery). In addition, as the phone is connected, turn it on before charging it, and then turn it off again.

If you don’t have any help, try this firmware or reinstall the vibran earlier.

As soon as the operating system is installed and not aware of those who haven’t retrieved the memory for the operation, try to repeat the instructions on Windows x64. Since the change in the size of the OS does not help, it will be done quickly popular program for installation - Flashtools.

If there is a pardon for "remote-need to unlock the devices to uses this command", then you need to go to the official MIUI website to download the bootloader for installing the firmware, you can read the details in.

Pidsumok

If you are looking for instructions, be it a phone with an unlocked lock, you can use MiFlash for additional help. Android system, as you can help maximize your phone number to consume an okrystuvach. Updating software pardons, updating "tsegli" or simply replacing the internal warehouse smartphone, you can also use the phone for its own direct indications.

Not all the masters of the Xiaomi Mi4c smartphone come from MIUI, installed at the virobnik factory. Some are critical of the Russian, those who want to add new functions or just change the design. In such a case, the firmware of the third-party rozrobnikiv has been installed. For Xiaomi Mi4c, the firmware is an awkward process, just a little more than just instructions.

Custom TWRP recovery firmware

The most popular way to install the new Xiaomi firmware is to install a custom TWRP cover version 3.1.1-1 for Android 7, 3.0.2-0 for Android 5 or a universal TWRP Multi for Xiaomi. If you want to copy it, copy it to a folder on a computer, in the way of some Russian letters, and change it to twrp_mi4c with extended img.

Also, it was necessary to install Mi PC Suite, having turned on the reversal in front of it. digital signature drivers for Windows. Oscillations from the factory that the Xiaomi Mi4c is not locked, then the firmware does not require an official unlocking for the additional Mi Unlock.

Installing TWRP in Fastboot mode:

1. Transfer the phone to Fastboot mode (vymkuti, tightening the keys "Guchnost -" and "Power", let it go when a hare appears on the screen of a vushantsi).
2. Launch the Command row at the fathers with TWRP recovery
3. Enter the fastboot flash recovery twrp_mi4c.img command into the command line and press Enter. The command for launching the installation of the custom recovery from the twrp_mi4c img file, which was removed earlier, can be called it.
4. Re-assign the phone to the live buttons. Whenever you open the TWRP menu, it is recommended to vibrate Reboot> Recovery, or if you do not need to re-install it again in the Reboot> System menu.

After the installation of custom recovery, you can go to the installation of the package with the firmware.

Installing Xiaomi MI4c firmware

The procedure for installing the package with the firmware is stored as a type of locked software security. For example, the official firmware can be installed through the "Update" program. If you will be vikoristovuvatisya firmware of third-party rozrobnikiv this zh Android version, Which is in-line, it is necessary to take the offensive after-effects:

1. Create a backup full-time supplement... Yogo can be revived і for the help of TWRP, ale є riziknennya problems on the firmware іnshiy rozrobnika.
2. Copy the locked firmware to the memory card or from the internal memory of the phone. Vona maє buti in zip format (not tgz).
3. Get involved in the custom recovery menu by clicking on the connected smartphone, offending the keys for regulating the purity Power button... Vibrate Wipe> Swipe to Factory Reset.
4. For the additional Install item, go to the firmware file and swipe to the right to start the package installation procedure.

It’s easier to switch from one version of Android to іnshu: from 5 to 7 or back. For the whole it is necessary:

1. Customize the installer package in zip and SuperSU format.
2. As long as the attachment does not vikoritovuyutsya universal recovery, then you will need to upgrade the recovery for the Android version, so that you can get up, some custom recoveries for Android 5 and 7 are awkward.
3. Copy it to your phone locked away from item 1 and 2.
4. Get in touch with the recovery.
5. Viconati Wipe> swipe to the right (clearing Data, Dalvik / Art Cache and Cache).
6. Reboot the recovery (Reboot> Recovery).
7. Install, run the installer.

When the installation is finished, the lockout will be blocked, and in the TWRP line it will become unsuitable for a fake victorian. It is necessary to install SuperSU immediately (without overloading), and then a new recovery. Then Viconati Reboot> Recovery.

Whenever a rewrite is given the MI badge, it means that a pardon has been made. In such a case, the system will be able to install Root Explorer and Flashify (for root users), send a call to the administrator of the rights of the superkoristuvach (root) and flash TWRP for їkh help.

1. Re-enlist at the recovery. Viconati Wipe> Advanced Wipe> select the Dalvik / Art Cache and Cache checkboxes> swipe right to the right to start the cleanup.
2. The installation is complete, after an hour to log in to the system. The first launch is nearly ten khvili.

To install official Fastboot firmware from tgz extensions, use MiFlash. Gagging given the way I've seen everything internal memory the phone and the block are locked, so you will be able to open the backup on your new phone.

Re-flashing in Fastboot mode with the help of MiFlash is shown as follows:

1. Close the firmware, install Mi PC Suite and MiFlash on the computer. Vimknennya inversion of the digital signature of drivers in obov'yazkov.
2. Rozarhivuvati tgz-file in a folder on a disk, in the way to which there is no Cyrillic and probіlіv.
3. Switch your smartphone to Fastboot mode.
4. Go to MiFlash and press Refresh to show the attachment in the list.
5. Click Browse in the MiFlash window and vibrate the folder with the zipped firmware. It is necessary to select the folder, the images directory is included in the yak.
6. After pressing the tricycle of the handrail using the Browse button, select the Advanced item.
7. Order from the FastBoot Script field to browse and enter the path to the flash_all.bat file from the papa with rosary firmware.
8. Click Enter on the keyboard, for which Refresh, and then Flash for the MiFlash window.
9. When the process is complete, the phone re-engages. The first launch of a triviaє 7-10 hvili.

Re-flashing the smartphone will allow you to restore access to new features, fix it up to your preference and get rid of the shortcomings of the regular software security.