Monoblock not bachit wifi. Computer does not bleed Wi-Fi adapter and adapter does not bleed merezhі

With a similar problem, enough large number Koristuvachіv Wi-Fi merezh. It’s not surprising, even at the same time it’s practical at the skin in a booth chi apartment є wifi router, which allows you to connect without wires to various Internet gadgets, such as laptops, smartphones or televisions.

Varto, it’s a problem, if the list of available Wi-Fi links is not visible to the first link, you can connect not only to laptops, but also to any other attachment with a wireless connection to the Internet.

Reasons for the availability of Wi-Fi requirements in the selection list

It is significant that all of the below written should be less than vipadkiv, if you can see if you want only one measure of wi-fi. If your laptop does not run out of water in the Wi-Fi network, then you.

Again, the main reasons:

1. Great distance between a router and a laptop;
2. Incorrect exposures.

For the first reason, I can be sensible. To її reverify, just go to your router and take a closer look at the extension you need.

If there is another reason (nayvіrogіdnіshoї), then it is necessary for її rechecking. For which mother is needed, even connections to your router via Wi-Fi or via remote.

How to go into the setup of the router we wrote in.

After you have entered the setup of the router, you need to go to the distribution, connected with Wi-Fi enabled. Depending on the model of the router, you may look like this.

Variants of roztashuvannya nalashtuvannya, scho vіdpovіdaє for zminu Wi-Fi channel on Tp-Link routers

Channel chi Channel - those that you need. The value of this option is often Auto or 12 (13).

On the right, in that channels 12 and 13 are cordon channels, with a lot of Wi-Fi modules installed in smartphones and laptops, they simply cannot be used. You need in the "Channel" option to set whether the value is from 1 to 11. After saving the change, change the router.

Visnovok

Most often, a laptop or a smartphone does not work with Wi-Fi networks through the installation on the router of the cordon radio channel. These channels are 12 and 13. In order to correct this situation, it is enough to go into the settings of the router, remember the channels to any range 1-11, save the settings and reconfigure the router.

The computer does not saturate the router - we are looking forward to the cable. A replacement patch cord is required. Win a bet crossover receivers are crossed. Today it is important to learn the wrong option. However, the boules were full of people who wanted to eat 2 PCs without a hitch. Here there is a factor of peculiarities of the Ethernet ports of the router and the computer - mirror image ...

Curious fluctuations were traversed: ping to pass, PC not to sack the mesh. Early versions of Microsoft's operating systems (XP, 7) had to be constantly upgraded. Windows 10 spared the designated shortfall. Vіdkrite, before speech, command line, dial ping 192.168.0.1 (numbers indicate the IP address of the router, other values: 192.168.1.1, 192.168.10.1…).

Ideal option

Try to come with another attachment. Bouv Asus, becoming Zyxel. Quickly localize any inaccuracies:

1. Cord.
2. Router.
3. Outrageous reasons (attack of hackers, try to evil).

Change cable

Negatively change the cable. Dart has a problem. The vein was cut off, or the wrong patch, the wrong one. Let out the cables, de є only part of the squeezed pins. Early mezhezhі protocols sometimes they allowed sly volatility. The system is a whole lot of practical work, it is a waste of money.

1. Get a reference cable.
2. Create a connection.

Batch merezha, prote itself the address of the administrator panel is not available? Two options:

1. Having changed the IP address of the router, I have adjusted it. Also, through Wi-Fi, the combination of numbers is also not available. vicorist dartless call, correct the IP address more precisely.
2. be conducted hacker attack. Vsmiknіt cord, revantazhuytes.

Rezavantage and possession

Routers hang for an hour. Other Wi-Fi works. Reason is too much. The Internet can breed hackers. Mozhlivo TP-Link, but the laptop through the cable recognized the attack. Navіt yakshcho pratsezdatnіst vіdnovlenа, it is recommended vikonatі aparatne dvidannya pristroy. Let's rewrite "doctor web smoke."

Antivirus

In front of the hardware, download the antivirus.

• Open the poke system.
• Dial "doctor web smoking".
• Download the utility.
• Unplug the cable.
• Run a review.
• Find known threats.

Let's look at a typical example. Koristuvach forum f1comp swear: TP-Link router, a good laptop (including Wi-Fi, Ethernet), PC connections otrimu IP-address type 169.154.x.x, rozpiznavatsya obladnannya. Typical infection pattern. Download the antivirus in some way, build hardware, download, rejoice, get ready again. The problem is aggravated by the increased reaction of antiviruses. Fresh infection is practically indifferent, vtіshtesya with the butt of the Red Zhovtnya.

Hardware

• Take a look at the case of the router, there is a recessed miniature (2-4 mm in diameter) button marked with the signature Reset.
• Take a clip of a kulkovo handle or a clerical violin.
• Stick the sting in the middle, pressing the key for 3-5 seconds.
• Reverse the day.

If the router still does not appear on the computer, please set up the WAN for the help of Wi-Fi. High error cable failure.

Having changed the equipment of the skid, to re-adjust the technique.

Not far from the update

Koristuvachs of the forums described an unimaginable fluctuation. The admin panel asked for a firmware update. Koristuvach waited. Prote was impatient. Having exhausted the chekati, the koristuvach woke up the liveliness.

After the confusion appeared: the dart interface is unavailable. If you want wifi, give the panel correctly. Vіdminny butt of a non-reversible suvannya obladnannya. Why irreversible? Router pickers will carry out updates “on the fly”. The shards of the cable have ceased to work, further away they become mysteriously untransformable.

Tse tsikavo! The operating systems of Vikna often break down, try to hurry up, vimknuvshi life. Nonsense. The first PCs were simply revanquished. Give the gift of a router to the devil's tolerance training.

Minor causes

In our memory, D-Link is light-heartedly reminded of lamatis. Computers are also more expensive. Prote perebuvayut the authors, yakі stverdzhuyut: zamalolas zalizo!

1. Merezheva map.
2. Motherboard.
3. Brain ... PC.

Imovirnist is very low. Umіltsi, schopravda, they will deliver one more joy ... twist the drivers. Possibility to surf the Internet for an hourly router Rostelecom to get in touch with such ridiculous arguments. Let's guess we'll take the roztashuvannya of the Outbuildings Manager:

1. Win+R (launch the Run tool).

Select your Ethernet card, right click, select "update drivers".

If the PC at home stops working on Wi-Fi, then someone should immediately start calling the provider’s service and check, until they give a consultation, otherwise you won’t come home until the fahivets. Tim is not less, you can often solve the problem with the help of the day on your own: it will be simpler, smarter, and in a number of vipadkiv - even cheaper.

Otzhe, why not sack your computer or laptop? There are three main reasons - the problem may be in the computer, the Wi-Fi router or the drivers. Let's take a look at their report.

PC or laptop does not get Wi-Fi: causes

In some cases, a PC or a laptop may not work through those that have connected to a new one. On the keyboard (both cases) of laptops, there is a special button that turns Wi-Fi on. As if they pressed on her violently, they could inadvertently turn on access to the border that didn’t hurt. At this time, just click the button.

Well, there are no buttons, look at the icon of recognition Wi-Fi connection, pinned on the "Start" panel nearby. For that person, like the daily icon, go to customizing Windows and find there the "Center for Management of Merezhi double access". Select the item there under the name "Change the parameters of the adapter" and switch to Bezdrotov merezhne z'ednannya noted. Yakshcho well nі - increase yoga.

Router or access point does not work

Sometimes it happens that Wi-Fi is turned on for other reasons, it is turned on on the router itself. Take a look at your body and change your mind, what is the indicator dartless mesh glow.

Yakshcho well nі, uvіmknіt bezdrotove z'ednannya. It can be done either directly on the body (for a number of models) or in the built-in extensions. To get into the network, open any Internet browser and type in the modem's IP address (a combination of numbers that is shown on the back side). If you choose to expand the settings, select the Wi-Fi option and turn it off. Save change and reconfigure the modem.

Problem with drivers

For lonely people, it’s so that in order to get the Internet running, you need to update the drivers or install new ones. This is usually the case after the installation of a new operating system or inappropriate drivers. In such a way, it’s easy to reinstall them, vikoristovuyuchi disks, given to you at the same time with possessions, otherwise, having taken the drivers from the site-virbnik of the merging card or laptop.

If a laptop does not get Wi-Fi, there can be no reasons. However, do not fall into a panic in advance, the shards will clear effective ways the solution to the problem available to the skin coristuvachev.

Problem Description

The presence of dart-free lines in the visibility of the PC - the problem is even wider, but there may be a solution.

You can get extra access to the Internet by connecting the computer to the router via an Internet cable. Such a wire is sold as a set with a router, but it can also be short. You can get the cable you need at the specialized stores.

Connections to adjacent outbuildings are connected through 8P8C sockets

This way of connection, obviously, does not work, as there is no Internet access in the given hour, in principle, or a faulty router. In other situations, the problem will be solved in time.

The most common reasons

Now, if you already have access to the Internet, you can easily figure out the reasons why Wi-Fi is not blocked through a PC. The widest of them:

• Internet during the day after an accident on the line;
• faulty router;
• on the laptop, droto-free access is disabled;
• access is connected, but Wi-Fi is not working;
• the computer commemorates deyakі merezhі, but not to know yours.

To remedy the problem, try to include the causes possible malfunctions step by step:

1. Perekonaytes that the problem is not with your provider. Phone to the required company. As if there was an accident on the provider's line, you will be informed about the obov'yazkovo and voice the clear terms and the adoption.
2. Perverte, what is the cause of the problem in the router. Vin may be technically faulty, then you may have to ask for repairs or replace it with a new one. Ale, for such a malfunction, the Internet will not be taken care of in the host.

It is possible, it is necessary to restart the router. Take it out of the net, check one piece of credit and reconnect. If the problem is not solved, it is better to experiment with fixing the channels.

Most of the problems with connecting to Wi-Fi are fixed in Windows 7

Attachment may not work through the wrong channel selection. The last one is 12th and 13th. Try changing it to the lower one or choose the Auto mode.

You can change the channel. Tilki do not vikoristovyte folded those old names. Change the encryption mode.

In any unreasonable situation, try to turn the factory settings

Roll the settings back to factory.

Even if it doesn’t help, wonder what it’s like for your Wi-Fi. There are two possible options here:

• PC does not identify the same channel;
• the unit flags other channels, but does not identify yours.

Since the PC doesn't identify channels in principle, take a look at what's on the new Wi-Fi. On the panel keruvannya, press the icon of the border. If Wi-Fi is connected, you will see color visions. If this icon is not seen, click on the new one to increase wireless access.

One of the reasons for the presence of a connection can be a driver. The stench could get old, for example, because you didn’t update the software at the same time. To revise them, write the following shorts:

1. Go to Start.
2. Right-click on the "Computer" tab.
3. Dali to "Upravlіnnya".
4. At the window "Attachment Manager" go to the section "Merezhnі adapters".
5. Choose the one with the word Wi-Fi.

Just like such an adapter, there is a red badge, it is not used. Click on it with the right mouse button and click on it.

Call not the drivers, but the special utilities available on the official website of the laptop manufacturer and the confirmation for the operation of a specific device

Yakshcho tsya diya did not violate the task, otherwise I will not build such a thing on the PC, I will have to install new driver. You can get yoga on the Internet or search on installation disk, what is included in the kit with a computer

If you have found a driver for the company, it is better to work on the official website of your PC builder. Otherwise, you may be aware of additional problems with your computer when looking at different viruses.

Dartless access may not be possible through mechanical failure Wi-Fi add-ons. Sometimes it is in the process of cleaning the PC from the saw or falling from the height. In such a mood, the detail should be replaced.

Nuances in the fallacy of the operating system

Depending on the way you win the operating system, you can try to fix the problem, vrakhovuychi її nuances.

Windows 7

For this system, the most common reasons for incorrect robotic access to dromeless access are:

• not properly set value robotic vape adapter;
• incorrect work of drivers.

In order to verify how the droto-free adapter works, and how it works, you need to go to the Internet. Drive in poshukovy row IP-address of your router and log in to the other side. Next steps:

1. Go to the extension settings and find Wi-Fi.
2. Go to the main checkbox and check the box next to “Enable Wireless”. Yakscho її mute, the router is switched off. Clearly, change the setting by ticking the box.

Maiže 80% of withdrawals (according to special certificate) the reason for such a behavior is daytime required drivers on Wi-Fi, as a last resort reinstalling windows on laptops

If it didn't change the situation, flip the module remote access on your computer. For which you can use the keys FN + F2 / F3 / F4 / F5 (for a skin model, use your own, experiment with them).

Reconsider that the module of droto-free access is mentioned.

Windows 10

If the laptop does not support Wi-Fi on Windows 10, we will need to check the following parameters:

• setting up a dartless adapter;
• nalashtuvannya operating system.

To rewire the adapter, do the following:

1. We go to the "Start" menu, select "Additional Manager" and then we know the required adapter, it may have a characteristic of 108.11n. If you did not show such a driver, you will need to install it.
2. Open the "Power" tab. Even though the attachments are closed, these contributors will need the information. To turn it off, press the second button and go to "OK".

Even if it did not help, turn over the settings of your router on the Internet.

Nuances in the staleness of the laptop picker

In order to understand, how to solve a problem with a measure, it is important to protect the nuances of the brand of your PC.

Dell

To change the task, turn the robot of the droto-free adapter. For this, in the "Start" menu, select the "Appliance Manager" tab, find the required adapter and reverse the functionality of the method, there are more descriptions.

HP

On the PC of this model, there is a special button. An image of an antenna is located on it. Try to enable wireless access by pressing the button, or press the FN and F12 keys.

Asus

On this model, it is necessary to turn over the mill twill adapter in a superior way. You can also help using the FN and F2 keys.

Lenovo

Use a copy of models of this brand, if you can use a special key to enable wireless access. If your laptop doesn't have it, hurry up to FN and F5.

What robiti, how can a laptop not succumb to a single measure of Wi-Fi

If you reinstalled Windows on your laptop and didn’t install all the official drivers from the vibrator’s website, function keys, smart for everything, don’t work

As long as the computer doesn't mess with your mesh, the problem can be solved in two ways:

• Restart the router and PC.
• Change the channel on which the router works.

Re-advancement

To re-attach the router, turn it on and off the electrical grid and check in approximately the amount of fluff, after which you should re-enable the attachment at the grid. Reboot the computer in the best way.

Now take a look at what is needed for a connection in the list of available connections. You can do this on the PC panel by pressing the left button of the mouse on the merge icon.

Channel change

Interruptions in the work of the dartless line can be caused through those that the PC operates on the same channel with a similar extension nearby. For example, your router and router susisda work on the fifth channel.

At this vipadka, offenses are created one by one pereshkodi. In this order, one of them may not receive a signal without a dart. We will forgive the decision - remember the channel for your attachment. Zrobiti tse is possible at nalashtuvannyah.

How are you having winickly problems? jetless access Connect the laptop to the router via an Internet cable and calmly analyze the situation that has developed. It's quite possible, you just forgot to turn on the drotoless adapter. However, if the problem is more serious, turn off the possible causes of the malfunction - to help fix the problem.

Problems with the Internet - it's completely unacceptable. The stinks can make robots or roses, and also fence other possibilities of the border. Yakshcho mova go about connecting via cable, possible reasons tієї problems may be not so rich.

The laptop shows available wi-fi, but does not connect

One thing to do is to expand the problem with the network - if your computer is available for connection to the network, but for those other reasons, you cannot connect to it. Such a problem can be blamed for one of the following reasons:

• the problem with the drivers on the laptop is that the connection may not be fixed, or it may be shaved after a successful connection with the mesh;
• cross the link - to Wi-Fi it’s not guilty, but it’s connected to a large number of outbuildings, as well as to switch over, so nothing can be done between your laptop and router;
• the password for connecting to the network was entered incorrectly - if you entered the security key incorrectly, the connection will not be disabled;
• string invalidity - if the connection parameters on the computer are disabled, the connection will not be disabled;
• failure of the robotic operating system - in case of any malfunctions operating system the connection will not work correctly.

Solution of problems from connections to wi-fi

Handwriting-by-hand analysis of the dermal vision of guessing more problems, as well as vivchimo global recommendations for those who are stuck with this problem in their system.

Pardon "Windows was not able to connect to Wi-Fi"

When you try to connect, you can see the message “Windows was not able to connect to the Wi-Fi device”. Tsya pardon may be the mother of a sprinkling of reasons for viniknennya. You can fix the problem and you can do it like this:

Video: fixing problems with connecting to the Internet

Security key distribution for the hour of connection to the Wi-Fi

Security key - security code for Wi-Fi merezhі. The koristuvach independently sets yoga, so that outsiders could not connect to the border. If you got stuck with a pardon about entering the wrong password, then, perhaps, you entered it incorrectly. To do this, schob, singsongly, correct the situation:

Do not share your security key with third parties - you will have to additional connections to improve the speed of your Internet in your hand.

Invisibility of saving parameters in the measure

After creating a new connection, you can pardon with the text “Merage settings, savings on this computer, do not allow the benefits of this merezhі”. This problem is often blamed after an independent adjustment of the router. To correct this situation, you will need to see the connection less, and then we will create it again. With whom to update all the adjustments, it will be possible to install the order again. Fight like this:

In Windows 10, the problem persists three times otherwise:

The problem can be blamed, for example, through the careless change of data at the fixed connections.

Other ways that you can help improve the communication

And now let's take a look at some serious solutions, which can help you with various connection problems. In our opinion, if Wi-Fi connection is not possible, these methods will also help.

Router reset

The simplest way to please all providers in the first week. Obviously, it won’t help with serious problems, but you can fix one-time problems with connections. The best way to change the re-advancement is in the following way:

Rechecking and installing the firmware drivers

Onovity intermediary drivers not folded, lower drivers for any other possession. Ask for help automatic system zavantazhennya drivers can be stepped on:

1. Press Win+X keys to open the menu swedish access and select the section "Attachment manager". Another way to get to the next menu is to right-click the bear behind the Start icon.

   

   Select "Additions manager" from the access menu

2. At the dispatcher of the annex, you can find the branch “Merezhni adapters”. Open up this tab and finish your yards. And then click with the right mouse button on the available possession. After that, as the context menu appears, select the option "Update drivers ...". In order to determine whether it is necessary to update the drivers, to pay respect to yoga, I will name it on the presence or to use pictograms, as it will tell you about the need to update the drivers.

   

   Open the section "Merezhni adapters" and press the button "Update drivers" on the required device.

3. You are being asked about the method of renewal. If you are connected to the Internet (for example, for an additional cable, if the wi-fi connection is not available), then simply click on the button “ Automatic Poshuk driver updates".

   

   Select "Automatically check for driver updates", as you have a connection to the device

4. Dock the end of the search, zavantazhennya that installed drivers.

   

   Please complete the search for drivers at the edge and have them installed

5. Since you can't access the merger, you are responsible for getting the driver for your merger adapter from another add-on and select the "Set up a driver search on this computer" option.

   

   To know the drivers on your own, select "Vikonati search for drivers on my computer"

6. Specify the location of the folder with drivers for further installation.

   

   Specify the driver download on the computer and click on the "Dal" button

7. After the installation is completed, restart the computer.
8. Try to connect again to the wi-fi network, so that you can switch over to the top of your problem.

If a simple update did not help, try to remove the driver again and install it again.

Skidannya nalashtuvan router

Even if the problems with the Internet do not disappear and the connection to wi-fi does not disappear, the varto goes to a more radical way to fix the problem. And throw off the patching of the router itself and patching yoga from scratch. If you don’t work hard, if you don’t have high-level knowledge and respect, you will risk being deprived without access to the Internet. Vikonati router can be dropped in the following way:

Once the device is turned off, it will turn back to the factory settings. Better for everything, you won’t have to do anything by hand after that, and problems with the Internet will be solved. Ale on the vapadok, as you still happen to vikonuvati nalashtuvannya independently, to fight with the oncoming rank.