Yak razdrukuvati information from a flash drive. Yak drukuvati without a memory card or USB flash drive? Є two options for robots with such an add-on

The direct USB interface can be used instead of USB flash drives, PictBridge cameras and digital cameras, but the USB Mass Storage standard is used. Some USB attachments are not supported.

DO NOT use the power cable or remove the memory card or the USB flash drive from the USB interface, if you read it or write down the data on a memory card or a USB flash drive (key "Photocentre" for a whole blimp). You can use the data or the card.

You can look at the photos on the display and over the hand. As far as the photographs are taken, they can be taken in front of the skin photographs on the display. Victory of the index side (with miniatures of photographs)

1. Reverse the memory card or the USB flash drive is inserted into the correct slot.
2. Promote the index page.

   The photo center has a number of photographs (for example, No.1, No.2, No.3 too). The photo center does not publish the current numbers but rather the names of files, which can be used with a digital camera or a computer for identifying images. You can hand over the side with miniatures of the image. All images will be displayed on them, and they will be displayed on memory cards or USB flash drives.

   1. Clavish Photo center.
   2. Natisnit Іndex.fr.
   3. Natisnit Index side that vibrate 6 photographers / row abo 5 photographers / row.
   4. 
      - Natisnit Parametri Druku, schob change the type abo the format of the paper.
      - If you do not need to change the parameters of the paper, go to KROKU g.
   5. Natisnit Paperu type... Viberit type of paper.
   6. Natisnit Boom format.... Viber format paper.
   7. Natisnit Colir Start, schob press druk.
   8. Visnente the number of the photo, as you need to overrule.
3. Natisnit Photo center.
4. Natisnit Іndex.fr.
5. Natisnit Druk photos.
6. Enter the picture number from the index side. When the number is entered in the last image OK.
   • - For MFC models:
     You can enter a number of numbers for an additional com or a dash.
     For example, enter 1,3,6 , schob nadrukuvati image No.1, No.3 and No.6.
     Enter 1-5 , schob nadrukuvati image from No.1 to No.5.
   • Dovzhina row for entering image numbers cannot be changed to 12 symbols (including Komi).
7. - For DCP models:
   Enter the required number of copies, + abo - .

   - For MFC models:
   Enter the required number of copies, or without pressing the field for entering without first pressing, and enter the number, or pressing the buttons + abo - .

8. Choose one of these steps:
   - Natisnit Parametri Druku, schob zm_niti nalashtuvannya druku.
   - I do not need to change the parameters, Colir Start, schob press druk.

Computer technology has ceased to be a divine for a long time. As soon as the computers are rich, it is possible to build only on the enterprises and in the offices, then because of the stench penetrated the neurally fast and home-like space. For a while, it has become a cup of tea and a periphery of possession, which has moved into the development of the power of a corystuvach. Zokrem, one of such bazhany peripheral annexes є printer Allowing any documents from a flash drive, an optical disk, or even from the PC itself. Read on to print text from a flash drive on a printer.

Find out, how to open the text from the flash drive correctly, and without zusil

And yet, unfortunately, it’s not a skinny koristuvach in the home minds of the drukar, the connections to the computer. For a reason, you should be pragmatic, since you will be able to transfer it to a well-known accumulation of documents and to protect your friend.

In principle, other documents from a USB flash drive do not support difficult tasks, and you can use such staff without a hitch if you are a bastard to get familiar with these recommendations.

The procedure for handing the preparation in the home minds documents for the mind of the printer, following the algorithm for making the last decision. Apparently, it is necessary to carry out the preparation of the robot, to ensure the delivery of the preparation files to the printer.

Robot preparation

For this purpose, we completed the robot with a set of text material, to edit it, and to save the file on a hard disk. And even more plug in be-a-kind, how can you see a flash drive abo optical disc.

It’s obvious that the first time it seems like a flash, it’s written on a flash, because it’s a quick and easy process of intelligence. And the axis of writing to the optical disk will take three more folds, in addition, it will take more hours.

Now, just to save the documents on a USB flash drive, bring it to the USB-rose, then you know the document that you have opened, click the right key of the bear and select the parameter "Send". You can see the additional menu, in which case there will be a few suggestions, where you can submit a document for preparation. Bezperechno, and select the parameter "Warm disk".

If the copying process is completed, on the screen there is a dialogue window showing the process. You can use a USB flash drive from a PC, vibrating in front of the parameter of a bakeless drive. At the end of the preparation of the robot, you can use the buzz of the drukuvalny attachment.

Options for a friend

You can send the virus to the copy center, de yo, the spokespersons will clearly deduce to you required document, ale for the qiu service you have to pay. It is possible to develop an innakse, having seen from outside services, and having leaned on to know, friends, or on a robot. Smut, schob there boolean installed printer.

Now, if you have a document and you know your order from a printer, you will need to add a copy last diy, to reach the meaningful plans. There are two ways to see this technical task, but one view of one team is displayed, the first one is transferred to the first computer, and the other one is deprived of the printer.

Vikoristannya computer

As soon as you scanned it in the first way, as on the printer it was possible to open the preparation of the text from a flash drive when you connected it to your computer, then you hardly know whether it will be difficult.

The process will be just as accurate as the printer is connected to your PC.

Sphatku. As soon as you see it on the screen, see it, know the middle of all documents in that file, which is so important to you to open it up.

Click on the whole file, you will see it. Now you can take another look about every vidadok, look at the item "Druk", and change the menu at the menu. It’s important to immediately create a copy of the copy anyway, so that you can add the settings to your friend.

At all times, direct to the solution technical staff, tied with the seal of the document, ends.

Direct connection

In the Danish hour, a lot of koristuvachіv were brought up to the printers of the new generation, more so new additions installed in the installations. With a look at the price, you can completely do without connecting a well-known accumulator to a computer.

For the obviousness of such an awful printer, everyone will be able to get away without using a flash drive. For all, read the recommendations, like on a printer, you can use a USB flash drive, and in a view, it’s so easy.

Before the speech, it may not only be a printer, but a more complex function, but also the function of scanning, copying and copying.

On the other hand, know the USB-rose, insert it into the new USB flash drive. On the panel I will attach to the document that you need to open, and then you will need to revise the copies of the copies.

Yakshho drukuvalniy pristіy mє the possibility of zdіysnuvati koloroviy druk, you will need to be given, as the document is guilty, the color option is black and white. It’s too late to wait with the introduction of the parameters of the adjustment, and fix the mittuvo more often.

Otzhe, the process of other preparatory documents, which are saved for the year to a noble nose, ni, as vivchit and recommendations and go to all the technical nuances.

Crazy, the easiest way to fit in with the staff of the field in order to turn around to help you from the closest photo studio, as for the sake of goodness, to create a photo in any format. However, the current equipment for additional assistance is available for self-catering in the home minds, even on the current day, printers with informative RK-displays and special roses are available for other people. For the quiet, who do not have such universal innovative attachments, we can recommend a lot of simple ones for the visitor in order to print a 10x15 photo on a printer, for a flash drive. The first of them is a pole in the attached attachment for a friend to any PC, be it a stationary computer, a laptop or a tablet with special roses.

The upstream stage of transfer is the launch of the operating system and the synchronization of the PC with the printer, dialogue windows with prompts through the provider and distributed "Attachments and printers". If there are reasons for the PC not to "run" the printer, it is necessary to switch it on until it is pink. Besides, if you want to know about the driver, you need to install the driver by speeding on the new disk, you can get to the outbuilding designated for a friend (at every driver's seat, you can add a link from the framing, the vicorist model and serial number printer). For successful synchronization to the PC, it is necessary to connect the flash drive from the photo, for a friend. The next step is to open a USB flash drive on a PC and click on the required photograph with the right button of the mouse to select the "Druk" function from the menu.

The upward stage of the field is in the fact that you need to vibrate the required format for another photo. So, at the top panel of the fusion window, it is necessary to change the name of the fusion window for a friend, to display the format of the camera ( album sheet A4, the only type, or the type, which can be installed by hand), as well as the quality of the image (call from a separate building 600 to 600). In order to vibrate a friend of 10x15 photos, you can speed up the additional panel of the dialogue window, which is spilling, rosted in the right part. So, if for a friend to pick up a papier of the necessary size (in this case, it is about the standard 10x15), then in the right part of the panel it is necessary to press on the icon with the sign "On the whole side". If it is necessary to check, at the bottom panel of the fusing window there is a checkmark against the option "Image by frame size"

As soon as the photographic caps of the necessary size did not appear, you can choose the standard A4 format (album sheet), selectable with the icon in the right side panel with the inscription "10x15 (2)". At the same time, there is the possibility of two photos of a given format at once on arcuts, and it is possible to show them as one and the same, so it’s different images, they don’t forget when you put down the necessary number of images in the lower one. Vibrating the number "1" on the input, you can only print one photo in the 10x15 format, as it will be required to use knives. In order not to get over the parameters, but to be asked in the dialogue window, a special function of the front view has been transferred, and in order to obtain the optimal option, you can boldly press on the "Druk" button, having bumped into the photo in front of the printer.

As far as the quality of the image on the go is overshadowed, you can try to change the parameters to the friend by checking the box next to the row "Adjust to read to the friend", and also corrected the "Keruvannya" in the pop-up menu. At the same time, it’s not going to be forgotten, but the finished result is already strongly infused with the quality of the paper, so it’s the most beautiful to pass the original product, the fact that it’s most often seen on a glossy photo paper as unclear.

The photographs taken on the camera of a terrible phone, for an hour, as a result, do not see anything quietly, but on a digital camera. Through the whole picture, the memory is practically packed with signs. How can you handle it without using the phone? Yak tse correctly zrobiti?

About what to visit:

Wireless connection

First pomichnik - WIFI. Rozdrukuvati to printers via WIFI is the easiest way. Win stasis to navigate the problem, if the printer does not have a lot of technology. And here you can get by without a computer.

Otzhe, on phones z operating system Android is required to go to the menu nalashtuvan. There you should know about "Druk". Yakshcho in new natisnut "Zavantazhiti modules", will be tied special programs for robots with printers. You will need to vibrate the suggested model, for example Canon or HP.

Khmara

Druk the document on the phone to the printer for help. For ts'go pristіy maє pіdtrimuvati Internet. As such a function є, as in the front view, you can do without a computer.

Yak, right?

1. For a cob, it is necessary to undergo a restoration at the storehouse. As soon as you write down there є, enter your login and password and log in.
2. Now you need to set up a friend on computers, phones or tablets. Tsi attachment can perebuvati to finish great vіdstanі from the printer. Yaksho є the ability to go to the Internet and go to hmarne skovische, druk will be healthy.

Rozdrukuvati photos from Khmari more special google program Cloud Print, which is called a virtual printer. You can sign up at the Play Market.

Є two options for robots with this attachment:

1. Log in to your Google Chrome account and connect to your printer. Now you can open one of the documents, which are located in the browser.
2. Another version of the field is installed on the phone of a special software security, as to allow other documents, as they are stored on the memory cards.

In Khmari it is possible to take a file. It’s not important to go up and over.

Vikoristannya cable

Downloading from your phone to a printer via USB is also easy. However, it’s awkward to prepare for the Viconati:

1. Pridbati special USB-cable.
2. Pidgotuvati link for USB connection before the phone.
3. Insert special supplement For example, PrinterShare.

It was overwhelmed by all the attachments between themselves and that go before the programs. Vibrate a consumer printer, and then a document or a photograph.

Rozdrukuvati files in this way are not possible on all outbuildings, on the vidminu, for example, from WIFI or hmari.

Robot with iPhone

With over-insured methods, it is possible to overrule files, as they are saved on Android add-ons or connected to Google. In the case of the iPhone and Apple, the situation is different.

However, in the previous cases, the printer is guilty of connecting to the Internet (WIFI or wireless connection). And a special program has been installed on the iPhone and the іnshomu gadgets from Apple.

1. Apple AirPrint. For a friend, the USB dart can not be victorious.
2. Handy Print. Garna is replaced by the foreground programs. There may be one suttuviy short-lived: for 14 days it’s free of charge, but then it’s necessary to buy it before the payment.
3. Printer Pro. Allowing drukuvati to document at the gloomy skhovischі.

With robots from the iPhone and Apple, you can choose to print a printer, whether it be Canon, HP or otherwise.

More options

How can you document your photos on the phone, without handing over to the attached attachments?

1. Connect your smartphone to your laptop or computer. Enter the memory through the ci annexes. Here the phone is playing the role of a memory card.
2. Connect the memory card okremo, having inserted it in front of the front. A card reader is familiar to everyone.
3. You can also lock a file in one go. social hedge and then, having gone to work from the computer, Viconati Druk.

Rozdrukuvati data from the phone is not so smooth. Here you can add special programs, WIFI, USB-cable. How can you do without them? So, speeding up social media, or having broken the phone, we'll save up. Deyaky ways to work not with the models of attachments, for example, those that go to HP may not go to printers of their companies.