Connected Hard. How to connect another hard drive to a computer: folding and recommendations

A hard disk is a simple and small "box" for a viewer, so that there is a great deal of information in a computer, whether you are a bitchy koristuvach.

The call itself is to be created: to finish with a simple ricchu. Ridko hto hour I will record, see, copy and paste files of great importance to forget about the principle of interconnection of a hard disk with a computer. And as well as more accurate - without a middle motherboard.

It’s like the components are tied into one without interruption to the robot, like the rank of wrapping is the hard disk itself, like the roses are plugged into the new one, and for whom the skin has a meaning - the whole key information about the problems for all the attachments of the economy.

HDD interface

The very same term can be correctly called the interaction of the Cosmos with the motherboard. The very word maє nabagato is shirhe meaning. For example, program interface. At all vipadku rely on respect that part, I will take care of the way people interact with programmed security (friendly "friendly" design).

Ale znitsya. The vipad from the HDD and the motherboard is not represented by a graphical design for a koristuvach, but a set special lines and protocols of transmissions of tributes. One to one component is connected behind an additional loop to a cable with inputs on both ends. The stench is meant for using ports on a hard disk that mother's pay.

In other words, the entire interface on the outbuildings is two cables. One to connect to the rose hard disk from one point to the power supply unit of the computer from the beginning. And the other loop is connected to one HDD from the motherboard.

Yak at the end of the hour they plugged in a hard drive - a pink IDE and remnants of the past

The ear itself, which is the perfect HDD interface. A long time ago, after the ninish worlds, it appeared on the market approximately in the 80s of the last century. IDE literally at the crossbar means "vbudovanie controller".

Being a parallel interface, ATA is also accepted to be called ATA - However, in an hour new SATA technology will appear and gain enormous popularity on the market, as the standard ATA will be renamed into PATA (Parallel ATA), so it will be unique.

All over the country, Syria is calling for its technical capabilities, the whole interface is among the rockets of its popularity, and it passes from 100 to 133 megabytes per second. And those are deprived in theory, for that in real practice the indicators will be more modest. Surely, new interfaces and pink hard drives will show you the IDE's display from the latest boxes.

Do you think it’s not easy to use shuvati and gimmicky sides? The older generation, melodiously, remember that the technical capabilities of PATA allowed the service to service two HDDs at once for one additional loop, which could be connected to the motherboard. Ale throughput capacity lines in such a case similarly rose to navpil. At the same time, they do not guess the width of the dart, but also because of their dimensions, the flow of fresh air from the fans in the system block.

At our time, the IDE is already naturally stagnant both physically and morally. First, since the recent rosies have been seen on motherboards of the lower and middle price segment, now the virobniks themselves do not have any prospects.

Outlandish SATA Sweetheart

For a trivial hour, the IDE has become the newest robot interface with accumulated information. Alle the technology of transmissions, and the processing of the gifts in the world did not stagnate, having projected a conceptually new solution. Nini yogo can be created practically at any master personal computer... I call itu - SATA (Serial ATA).

Rice interface - parallel to the low power supply (sometimes from IDE), lower heating of the components. Over the entire history of its popularity, SATA has experienced development in three stages of revisions:

1. SATA I - 150 mb / s.
2. SATA II - 300 mb / s.
3. SATA III - 600 mb / s.

Before the third revision, a couple of updates were also broken:

• 3.1 - the throughput of the building has been increased, but it is itself surrounded by a limit of 600 mb / s.
• 3.2 due to the specifics of SATA Express - the successful implementation of the SATA and PCI-Express attachments, which allowed the read / write speed of the interface up to 1969 mb / s. Roughly, the technology is a "crossover", which is to transfer the special SATA mode to a larger one, which is the same as the PCI-rose line.

The real indicators, apparently, were clearly seen from the official statements. First of all, I am able to summarize the overwhelming capacity of the interface - it’s just enough to save up to 600 mb / s, so there’s no chance for a robot to read / write. In less than an hour, since the market will act on a step-by-step basis with high-quality accumulators and indicators of robotic performance that are new for the current day, the technical potential of SATA will be taken into account by the general public.

First, a lot of physical aspects have been added. SATA insurance for large cables (1 meter versus 46 centimeters, which were connected to hard drives with a pink IDE) with compact sizes and we accept a callable viewer. The "hot change" HDD support is saved - it is possible to connect / disconnect the computer without connecting the computer AHCI mode from BIOS).

Grown and quickness of connecting the train to roses. With all the versions, the interface is wrapped in one by one (a SATA III hard drive can be easily connected to II on a motherboard, SATA I to SATA II, etc.). One caveat - the maximum flexibility of the robot with the data will be surrounded by the best "old" Lanka.

Vlasniki of old attachments also do not get overwhelmed - there are new adapters from PATA to SATA that can be hidden from the expensive purchase of a modern HDD or new motherboard.

External SATA

Do not wait for a standard hard drive to go to the manager. There is a demand from the great societies of dignity, as they require a victorious from the children of the day and, apparently, transport. For such vipadkіv, if with one accumulation it is not only at home, but the broken discs are broken. In connection with the specificity of its attachment, it is necessary to use the connection interface.

So it is more a kind of SATA, folded from pink hard drives, with an external prefix. Physically, the interface is not smart with standard SATA ports, with a similar power throughput.

Є "hot change" HDD is added, and the cable itself is increased by up to two meters.

In the cob version of eSATA, it is allowed only to exchange information, without supplying the necessary electrical energy to the current hard drive. There is a shortage of time, but it has added to the need for two loops to be connected at once, buv directions with the arrival of the Power eSATA modification, summed up in its own eSATA technology (indications for the transfer of any data) from USB

Universal last bus

In fact, the Universal Serial Bus has become the most widely used standard for after-interface digital technology connectivity, the Universal Serial Bus in our days of skin types.

Transferring the history of the last great changes, USB - tse temporality The transmission of tribute, the safety of electrical births is unprecedented in the absence of peripheral attachments, as well as the simplicity and finesse of a poached victorian.

An interface that can be distributed by such companies as Intel, Microsoft, Phillips and US Robotics, becoming at the same time a number of technical partners:

• Expanded functionality of computers. The standard periphery before the appearance of the USB stick is interconnected in the flexibility and the skin type of the USB device is required for a premium port (PS / 2, a port for connecting a joystick, SCSI is too small). With the arrival of USB, I was thinking that I’d become a single universal replacement, meaningfully forgiven for the interconnection of attachments with a computer. Moreover, it was also transferred, in a new way for its own hour, to stimulate the development of unconventional peripheral annexes.
• Secure the connection mobile phones to computers. Broadening rocky tendencies to transition mobile hemstitch On the digital transmission of the voice, it was revealed that the same interconnections were broken down to prevent the transmission of tributes and promises from the phone.
• Winning a comfortable "plug and play" principle, attaching to "hot plug".

Yak and i have a wide range of digital technology, USB-rose for a hard disk most hour becoming a complete manifestation to us. However, in the development of its own development, the interface is always demonstrating the new heights of the modern indicators of reading / recording information.

Criminals of specificity, development of USB versions, realizable and різні tipi attachments Among the types of cables and roses on the interface you see:

USB 3.0 already has one new type - C. Cables are symmetrical and are inserted at the external attachment from either side.

On the other side, the third revision does not transfer Mini and Micro “pidvidi” cables in type A.

Alternative FireWire

For all its popularity, eSATA and USB are not all options for connecting a new hard drive to a computer.

FireWire is a high-speed interface for popular masses. I will secure the last connection outbuildings, up to the number of which can also be included in the HDD.

The power of the isochronous transmission of the data has been very well known in its multimedia technology (video cameras, DVD-programs, digital sound equipment). Hard drives can be used to connect more and more, and can be used for SATA or a sophisticated USB interface.

Its own technical indicators of the whole technology have been added step by step. So, the current version of FireWire 400 (1394a) was better for its current head competitor USB 1.0 - 400 megabytes per second against 12. The maximum allowable cable is 4.5 meters.

Having come USB 2.0, having overshadowed the supernick in the back, it is possible to exchange data from the speed of 480 megabytes per second. However, with the release of the new FireWire 800 (1394b) standard, which allows transferring 800 megabytes per second with a maximum cable of 100 meters, USB 2.0 was requested on the market. Tse provoked the launch of the third version of the last universal tire, which expanded the stele of the exchange of tribute to 5 GB / s.

The advantage of FireWire is decentralization. Transfer of information via USB-interface is required by a PC. FireWire allows you to exchange data between attachments without requiring a computer to run before the process.

Thunderbolt

The fact that what a rose of a hard disk is guilty of by the unstoppable standard was shown by Intel separately from Apple, presenting the Thunderbolt interface (for sure from the old code name, Light Peak).

Inspired by PCI-E and DisplayPort architectures, the distribution allows you to transfer data, video, audio and power through one port with a fair hostile speed - up to 10 Gb / s. In real tests, the indicator is more modest and up to a maximum of 8 Gb / s. To protect this, Thunderbolt is ahead of its closest counterparts FireWire 800 and USB 3.0, not even about eSATA.

But such a massive expansion is a promising idea. Wanting to be successful in developing new hard drives, the Thunderbolt interface, will be successful for the current year? On the other hand, the price for the technical capabilities of the technology is also somewhat chimical, so there is a lot of space between expensive outbuildings.

The confusion of USB and FireWire can be secured with additional adapters. This kind of thing cannot be broken with great speedy transmissions of tribute, because the bandwidth of both interfaces is all unimportant. There is only one change here - Thunderbolt will not be a LAN, but it will be interconnected when connected, allowing all the technical capabilities of USB and FireWire to be used.

SCSI and SAS - those that are far from everything

Another parallel interface for connecting peripheral attachments, which at one moment the emphasis of its development from desktop computers on a wide range of technology.

The "Small Computer System Interface" was used in several versions earlier than SATA II. Until the moment of the outbreak of the rest of the offense at the interface behind their powers, they were practically identical to one to one, they would be able to prevent the connection of the hard drive with a stable robot from computers. However, SCSI vikoristovuvav at the robot's bus, through the controller, there is no more one of the connected attachments.

Further, the technology has been improved, as I have given a new name SAS (Serial Attached SCSI), but it has also added its own small part. SAS will secure the connection of attachments with a set of kerned SCSI commands behind a physical interface, which is similar to SATA before. However, more wide possibilities allow connecting not only pink hard drives, but rather a lot of peripherals (printers, scanners, etc.).

There is a hot replacement for attachments, expanding buses with the possibility of one-hour connection of SAS attachments to one port, as well as transferring speed to SATA.

NAS Perspective

A good way of robots with great debts of tribute, which is rapidly gaining popularity in the stakes of everyday koristuvachiv.

Anyway, the NAS is a very fast computer with a disk array, which connects to a net (often to local) and prevents the transfer of these middle connected computers.

They play the role of a lath groove, before their attachments a mini-server is connected via an Ethernet cable. The given access to the first setting is done through any browser with connections to the address of the NAS. On a new basis, you can choose to use an Ethernet cable, or for an additional Wi-Fi connection.

This technology allows you to secure a sufficient level of information and pressure to provide easy access for additional individuals.

Features of connecting hard drives to laptops

The principle of HDD robotics with a stationary computer is borderline simple and dermal noise - in a large number of cases, it is necessary to use a single cable to connect a hard disk with a living unit and an analogous connection to the motherboard. With victorious new accumulations, you can get away with just one loop (Power eSATA, Thunderbolt).

Ale yak correctly vikoristovuvati roses' hard drives of laptops? Adzhe іnsha construction of crops'yazuє vrahovuvati and іnshi nuances.

First, to connect the accumulation of information directly "in the middle" of the very attachment, the form factor of the HDD is guilty of the values ​​yak 2.5 "

In other words, a laptop has a hard drive without having to before the motherboard. Without additional cables. It is enough just to spin the HDD on the bottom of the front of the laptop. Vaughn is a straight-haired viglyad and let me screw with a couple of bolts. Itself in that іmnіstі it is necessary to change the pristіy zberіgannya.

All roses of hard drives in laptops are absolutely identical to their larger "brothers-in-arms" for PCs.

Another option is to connect - be quick to connect. For example, a SATA III storage device can be plugged into USB ports, installed on a laptop, behind an additional SATA-USB adapter (there are free additional attachments for new interfaces on the market).

It is enough just to bring the HDD to the adapter. Connect to a 220V outlet for power supply. Also, use a USB cable to connect the entire structure to a laptop, for which the hard disk is displayed for an hour or so, and it will be distributed more than once.

Often unstable computer robots are tied to unstable vіlnogo mіstsya on the hard disk. For the solution of the problem, you can see unused files If there are no such, it is necessary to install an additional HDD on the PC. In this statistic, an instruction has been introduced from the connection of another accumulator, and described the actions of the water stones, which can be found in the operation during the operation.

System payment support

Otzhe, yak switch other hard drive to the computer? "SATA or IDE ports soldered on the system board?" - Persevere nutrition, on the way to the return before HDD installation. It is necessary to use it, as the motherboard model is installed in the system block. The price can be changed by installing the AIDA64 program on the computer. The utility will show you information about the computer. At the left part of the main window, the programs have enough natisnuti on the text "System board", so the model is familiar. For this, it is necessary to know the documentation for the motherboard and for the connection port for the accumulation of installation on the following: SATA and IDE.

As long as the documentation is not known, it is necessary to install the filling of the computer independently. For the whole, it is necessary to take the left crack of the system unit, in front of the front screwing the bolts on the rear side. Rigid disks are retouched at the front of the PC case at the special chisels. Zvernit respect for a loop, which looks like a system board to the HDD. It is wide, which means that the interface for connecting the storage device is IDE, the vuzky one is SATA.

For a visual look, we have lost any idea of ​​what type of plug-in is to be used on the motherboard? At the end of the day, turn on the loop from the accumulator and beastful of respect for your eyes. Yaksho the connector will appear at the viewer of the letter "G". Well IDE is a connector of a rectangular viglyad with two rows of openings.

Zvernit respect for the area of ​​the motherboard, where the train is from the accumulator. Why are all the ports busy? As long as there are no vilnyh ports, plug in the hard drive in a classic way. Also take a look at the cable itself, which is the interface for the HDD - IDE plug. Call on the new two conectories for the accumulation, and one of them can be vilny.

Before you connect another hard drive to your computer, take a look at what is in the building of the technology for the installation of storage. As far as it goes, the hard disk can be placed on the bottom of the system unit, but not without a problem. When the computer is moved, the hard disk will not be able to be used, and it will be difficult to code the elements of the PC, or it will be out of order.

Hard disk drive

Before that, how to connect another hard drive to the computer, it’s next to a sprinkle of gadgets. For the purpose of being assigned to the connection interface, it is possible to send a username. Remember, it is best for a computer to use hard drives with a size of 3.5 inches. Naymenshi zraznachi priznacheni for installation in laptops. If you want to know what the parameters of the HDD form factor are 2.5 inches, you can install it in a special case-adapter and wikoristovuvati in the desktop PC.

Also viznachte, yak to do it. As soon as you have to save your documents, it’s enough to add a 320 GB HDD. It’s easy to transfer files of high readiness and computer igor, more beautifully than a hard drive with a capacity of 1 TB.

MAK SENS zvertati uvagu і on the characteristics of shvidkostі reading and write down tributes. The rule here is one: more is more beautiful. If I want a computer to be victorious only for robots in office programs, I don’t have to overpay for a characteristic.

Correct camp is a changeover

Koristuvachi, the motherboard is equipped with only IDE ports; Yak connect another hard drive to the computer, where do you put the switch? Also, as soon as one HDD will be delivered to the loop, the switch must be set to the Master position, and the cable itself must be connected to the extreme connector to the cable. As soon as two accumulators come to one dart, then on a pre-built hard disk the jumper is guilty of standing in the slave position, and he himself is guilty of being connected to the connector, which is a disassembly at the end of the loop. It is not necessary to install jumpers on a SATA disk, so a cable is used for a skin drive.

How can I connect another hard drive to my computer?

The procedure for installing HDD for storage devices from being the same interface. Regardless of the type of hard disk for installation, see the following:

1. Know system unit.
2. Turn the bolts to trim the left side of the hull, that sign is. Silently pull back.
3. Install the accumulator near the system block. At correct installation fit for screws on the hard disk mounting bracket and open it on the HDD to be installed.
4. Twist the gvinty.
5. Before connecting another hard drive to the computer, I respect the connection of the loops to the first. Switch to dodatkovy accumulative darts are similar, yak і to the main one.
6. Reinstall the case and turn off the computer.

BIOS setup

In addition, as another hard disk is connected to the computer, it is necessary to add a bit of change to the BIOS, some of the first imposing add-ons will be recognized every time the HDD is installed. Tse proizvodit up to unkindness zavantazhennya OS. For setting up "BIOS":

1. Release the computer by pressing the live button.
2. As soon as you sleep the screen, you can immediately press on the DEL key or F8. On portable motherboards, there are small buttons for entering the utility BIOS setup... To be smart, to press the onslaught, to follow the news on the screen or to provide instructions, as to get to the system payment.
3. To enter the BIOS, go to the Boot tab.
4. At nіy shooters vibrate and push on "INPUT".
5. In the menu, move the cursor to First Drive, press ENTER and vibrate the hard drive, on which the system is installed. If you do not play, as the HDD goes to vibrate, set the relay to the correct position.
6. Turn to the front menu by pressing ESC.
7. Here go to row First Boot Device and natisnit "INTRODUCTION". Inodi, go to boot, move to the Boot Devices Priority submenu.
8. Vibrate menu Hard drive... I will write the name of the hard disk again if it will be displayed.
9. Press on the F10 to save the changes, and then on ESC for the exit from the utilization of the computer setup and rewiring.

As long as you do not get lost in your PC manners, turn to croc 5 and vibrate the best.

Significant hard drive

How can I connect another hard drive to my computer, how can I use SATA and IDE ports on the system board? I have a lot of vipadku the most beautiful version of bude newcomer... You can connect these attachments to the USB port. Up to FireWire. For the first one, you can get up to a PC, for another you can get rid of the possession of a special port. Golovna perevaga new HDD- Postponed. You can easily connect that vimikati without using the computer. However, these attachments are more likely to be installed before being installed in the PC case.

Adjustment of the operating system

How do you install the Viconati systems and how to connect another hard drive to a computer on Windows 7? SATA or IDE - accumulate, which often does not appear in the system file manager for installation.

If you want to display a new HDD from the provider, check out the following:

1. At the row of the Start menu, enter the text "Keruvannya".
2. Click on points with the text "Keruvannya by a computer".
3. Vibrate "Keruvannya discs" at the left part of the equipment.
4. Click the right button on the disk, which is not visible to the provider. Z'yasuvati, with the HDD on the right side of the track, you can change the meanings of the exchange with the real ones and insert the symbols of the razdiliv.
5. On the list doy, scho flaring up, click on "Create a simple volume", then add file system The size of the cluster, when clicked on "OK".
6. Click again on the right button of the HDD to display the operation, and in the menu, select the row "Change drive letter".
7. At the window click on the button "Dodati" and ask the bazhan letter.

If you buy a new HDD, supply power, connect another hard drive to your computer. The price is awkward, ale the first time, the robot needs to change, but your system unit is not guaranteed. On the right, in order to install another hard drive, you need to take a computer's cry. Do not break the seal and, obviously, will void the guarantee. To find out such a situation, you should turn to the service center.

As the guarantee has ended, for every day, feel free to know the backdrop. Vona rip on two gwents on the back of the computer. Make sure to open the computer and see it from the bottom. The installation additional winchester to be carried out only with the installed system engineer. It’s not a USB flash drive, and HDD can just go out of the way.

You will need to take a look at the motherboard and even if it costs a Winchester. Most modern computers can use SATA. Sew the plug-in cable from the explicit HDD to the motherboard. The mandate iz tsim roz'em is guilty of the known one as minimum one such samiy. It will be based on the type of your mother's payment. Great may be up to 5-6 times, on small may be less than 2.

As long as you have a standard type of motherboard, you just need to vibrate the socket to connect. As long as you have a combo (tobto is small), there can be little folding. On the right, in the slot you can connect the first winchester and optical drive. I can find that there is no way to connect an additional hard disk drive. The price of a budget motherboard and an hour of stink does not transfer the power of plugging in hard drives. Yak stand up two hard disk in such a way? You just happen to have a DVD-ROM drive and a port.

If you have an old computer with an IDE connection type and if you have lost one slot, you have the ability to install two devices on one loop. The price can be 2 HDD, and Winchester with an optical drive. When connected to one loop, you will be able to see the last one system disk, and before slave - dodatkovy. Master is in the middle of the train, slave is in the middle. In the instructions to the HDD, it is meant, in order to set the jumpers for this mode.

For that, as they were z'yasuvali, where to connect another hard disk to the computer, after that it is recognized, we go to the offensive point. Tse є will be supplied with electricity. It is important to marvel at the darts to go from the living block. The old system units have the IDE type, the new ones have SATA. In the case of PCs, the offense is instantaneous. Since Winchester has a SATA port, and in the block of living there are no more IDEs, it's not easy to get over it. You will need to add a link from one type of connection to one.

We knew that the connection of another hard disk was being displayed in both roses. Now, you need to get that fix. Know de worth the first winchester. Regardless of the size of your body, the handrail can be from one to three places for disks. It’s a lot of fun, but it’s enough to plug in two HDDs so that the stench has gone one from one. Winchesters can get very hot for an hour while the robot needs ventilation. The greater the space around them, the more beautiful the ventilation is.

In a small case, the installation of another hard drive means that offense will be severely damaged. Especially in spec rock. Tom bazhano pridbati for them the cooling system. When connecting another disk, do not forget to screw it to the body with guntics. There is a mechanical part on the view of solid state drives HDD, which can be easily processed. When transporting a Winchester, you can use one of the slots, but the price is not deprived of it, but the motherboard.

Another Winchester on a laptop

Winchester on portable computers does not have the same great power as stationary computers. Some people want to get better, but on a laptop there is no transfer slot for a supplementary winchester. in such a way? The price can be changed by installing the HDD to replace the optical drive.

In addition, there are special links. Without them, you will not be able to plug in more Winchester, fragments of roses, DVD-ROMs and HDDs. In front of you, you need to get your drive. You can see it on new laptops. The most widening is 12.7 mm and 9.5 mm. You can know the price like this:

Vikoristovuvati program for diagnostics of the type Everest chi AIDA. Look at the model of the optical drive and know the specifics in the Internet. On the website of the virobnik you can find the exact details. Vikrutiti will lead and I will hand over it.

You can start writing the addressee before the Winchester is installed. Get the computer out of the way and get it out of the way. Razkruchuvati yogo can be deprived of a non-working machine. Vityagnit optical gadget. Most often you can get 2-4 guints with help.

Look at the crossover and mark the emphasis, straightening on the opposite side of the roses in the region. Deyakі magayuyutsya vіmknuti another disk, attaching yogo before the transition pіd gostry kutom. You can also mess with contacts. An important stop is required for fixing a hard disk. Then we’ll squeeze Winchester until we get in touch. In some cases, it is necessary to submit a statement.

After setting and fixing the emphasis, tighten the bolts for a more rigid connection with the disc. Schob not psuwati zovnishniy viglyad laptop, you need to take the front panel from the optical drive and attach it to the hard disk adapter. Gently insert the attachment on the laptop and put all the clips back. As soon as everything was broken correctly, a new hard disk appears in the BIOS.

System adjustment of the disk

You know how to set up another Winchester at the PC. Ale tsyogo zamalov povnotsinnoy robots with him. Now it is necessary to set it up, and the system has recognized it. Even though the disk is new, it’s not small areas and cannot be visualized operating system... As long as you have Windows installed, it’s possible to change it by re-installing it in the "Keruvannya disks" distribution. You can eat in the whole menu by clicking the right mouse button on the "My computer" icon and selecting the "Control" item.

At the central lower part, all connections are displayed and collected. New disc mite the mіtku "Not rozpodіleno". You will need to click on the area with the right button "Make a simple volume". Show up "Meister Nalashtuvannya", see the instructions for what kind of disk space, file system, and signify that letter. Remember, you cannot assign the same letter to two parts. If you have not had the chance to get stuck because of the OS freeze and the trouble in the process, shut down your programs. When the procedure is finished, the new Winchester will be displayed in the system.

We looked out in detail, like a computer, a hard drive. Having looked at the video below, or even after the text, you can see in detail and in more detail the imperceptible moments.

Recognize the situation: you are viewing the term robot and the rapt on the laptop ... the laptop is connected and does not fit anymore. The robots have gone a long way before they are made, and the repair of a dodgy apparatus will not be quick. How robiti?

Golovne - do not panicuvati! You can still wake up, as long as you have a stationary PC. Suffice it for mothers to hand over the secret of the nobility, like plugging the hard drive from the laptop to the computer. We'll talk at a glance.

Briefly about accumulation, how to play on laptops

On modern laptops, it is not only the traditional HDD that is used, that is. First and foremost, there are many different kinds of connection interfaces.

SATA

The most popular interface for hard and solid state drives is SATA. Win of performances with 7-pin pink transmission of data and 15-pin - for connecting live.

SATA interface Most often it is necessary to develop and accumulate funds for stationary computers, if the motherboard is new (as long as you don't mind specializing and old attachments). I will rise to the identical SATA standard, which is common in laptops. More precisely, the single standard.

IDE (PATA)

You can save up with the IDE (PATA) interface this year, you can do it on even old outbuildings - for about 10 years. Rice vidminna is a 40-pin rose for the loop transmission and 4-pin vivification port.

Motherboards for stationary PCs last generation The IDE (PATA) interface is not supported. To connect the IDE drive to the computer, it is de-implemented without the SATA drive, an adapter is required.

mSATA

The mSATA format has a miniature accumulation of the last generation. For the shape of roses, mSATA is even similar to mini PCI-E, but the odor is electrically insane.

Connect the mSATA attachments to a large number of desktop motherboards only through the adapter, the fragments on them can be easily connected.

M.2

SSD-drives to the standard M.2 are still compact, not mSATA, and are mostly used on ultrabooks. Х vipuskayut from roses' three types, which appear one from one rosette key virizu:

• Type B maє viriz closer to the left edge. The part, which is located more than the key, has 6 contacts.
• Type M ma viriz closer to the right edge. The part, yak roztashovana right for viriz, vmіshuє 5 contacts.
• B&M type can be used with keys.

SSD with B and M roses can be connected only to a slot of its own type, and B&M - to that same type.

On desktop motherboards, M.2 slots are still quite rare.

Connecting HDD from a laptop to an interface of the same type on a PC

Everything is simpler here. To connect a SATA drive from a laptop to a stationary PC analogous to the interface of the motherboard, a SATA loop of data transmission (on the pictured right-hander) and an output connection to the cables of the living unit is available. As a matter of fact, buy a Molex-SATA adapter from a computer store (on the picture).

In another way, connect the SATA cable to the port on the motherboard. The bandwidth of the port (3 Gb / s, 6 Gb / s) is not very high for the plan.

To connect an IDE (PATA) disk to the IDE port on the motherboard, you need a wide 40-pin ribbon cable, a Molex live cable + an IDE 3.5-2.5 adapter.

If the computer doesn’t get locked up, it’s not necessary to switch it to the slave (pidlegly) position. Try to get help for the jumper (jammers) on the contacts of the IDE-disk, as the order is removed from the live port. Information about the installation of the jumper in the "slave" position can be found on the disk, or in the library before the new one on the virobnik website.

When the jumper is installed in the "cable select" position, the cable is connected. At the same time, the "slave" drive is guilty of the connection to the block in the middle of the train (for a little bit).

You can simply insert mSATA and M.2 into the slot on the motherboard.

Connecting a disk of the same type

To connect to the computer, the computer does not need to be connected to the motherboard, you need an adapter adapter. For example:

• IDE-SATA (SATA-IDE).

• SATA-USB.

• mSATA-USB.

• M.2-USB-SATA.

• IDE-USB, mSATA-SATA, M.2-SATA, etc.

There are quite a few adapters available, but not all of them are easy to find on sale.

Yak rozmіstiti small mobile HDD in the system block

Another problem is that I often run out of numbers - like the size of the HDD from a laptop all over the place of a stationary computer. Here, a few options are also allowed:

• Installed in cats 2.5 ”. A lot of computer cases of the last generation can be used for SSDs, you can insert a 2.5-inch HDD into a laptop.

• Vikoristannya adapter 3.5 "-2.5". All the middle of the adapter is supported by a mobile accumulator, fix it, then insert everything at once at the cats for standard hard 3.5 ”disc and screw it on with screws. There are adapters and larger compact noses - 1.8 ".
Січень 13, 2018 | Johnny mnemonic

We bought a new hard drive for a computer and you don’t know how to plug it in ?! I will try to get more detailed information from the statistics and it is available.

For the first time, it means that the hard drive can be connected to the motherboard either through the IDE interface or through the SATA interface. The IDE interface is old-fashioned at the moment, although it became popular in the 90s of the last century, and new hard drives are no longer equipped. The SATA interface is used on all computers that have been released since about 2009. You can easily see the hard disk connection from this, from this interface.

Connecting a hard disk via SATA interface

An integrated system unit from a hem and a well-known panel. At the front of the system unit there is a display for annexes. At the top of the road, you start to get up optical drive CD / DVD, Blu-Ray, and lower designations for installing hard drives. As long as the system block has no views, which are shown on the little one, you can put the hard disk at the top view.

The hard drive is installed in a vilny midway in such a rank, so the roses were amazed in the middle of the system unit, and even to the case with gwints: two gwints from one side and two from the bottom.

On tsomu the establishment of a harsh the disk is completed, turn it over, I don’t think it’s in the comic.

Now you can connect the hard drive to the motherboard.

If V has attached a hard drive from a SATA interface, then on the drive itself there are two roses: the one that is shorter, says for the transfer of money from the motherboard, the one that is better - for living. Dodatkovo on a hard disk can be one rose, in the middle of the day for feeding live through the IDE-interface.

Loop transmission given by the same plug on both ends.

There is only one end of the loop to the pink SATA data on the hard drive.

The plug can be straight or G-extra. You can not be afraid for the correctness of the connection, insert the cable in the wrong rose, or on the wrong side, it is simply not visible.

The Інshi kinets loop is plugged into a rose on the motherboard, chill the stench of a bright color.

Even on the motherboard there is no SATA-rose - you need to buy a SATA controller. Win maє viglyad pay that is installed at the system unit near the PCI slot.

Finished from the connection of the information cable. The cable is now plugged into the hard disk drive.

As long as your block has a lot of power for SATA attachments, and there is not a lot of power for an IDE interface on your hard drive - just use the IDE / SATA adapter. IDE plug to the living unit, SATA plug to the hard disk.

On the whole, a hard drive from a SATA interface was connected to it.

Connecting a hard disk via IDE interface

Installing a hard disk from the system unit is the same as described in paragraph vishche.

Now you need to set the hard disk mode: Master or Slave. Whenever you install one hard disk, select Master mode. For this, it is necessary to put a jumper at the required position.

Rose IDE on the motherboard like this. Bіlya cutaneous from them є designation: either IDE 0 primary, or IDE 1 secondary. So as I plugged in one hard disk, then we will be victorious at first.

All the hard drive is now connected.

I think now that you can P connect the hard drive to the computer.

And also wondering video