Asus router version RT-G32: model description, installation, adjustment. Video: Setting up automatic IP address rejection from Windows

Firma Asus is a virobnik of electronic electronics, including routers for access to the Internet.

The Asus RT-G32 version is a classic budget model.

Tsey pristіy for sale at any electronics store. Kostu is very inexpensive, because one of the modems is the most sold. A professional setting up an Asus RT router will take about 10 hilines. For beginners, there is a manual instruction, it is easy for the beginners to quickly see the self-training of Asus before the robot.

Technical characteristics of the Asus RT mouthless router:

• Type - WiFi hotspot.
• The call standard is 802.11n, the access point is on the 2.4GHz satellite frequency.
• The rate of transmission is 150 Mb / s.
• Encrypt using WEP, WPA and WPA2.
• Demand 18 dBm.

Zovnishny viglyad Asus

G32 stylish design zovnishniy viglyad You can mount it on the wall or on the flat surface. RT-G32 visit only in white color. On the front part of Asus there are light indicators of vitality, as well as support of mouthless and globally. On the back panel of the G32, the buttons can be retrofitted, start z'єdnannya WiFi, roses for connecting festooned outbuildings, living block. The RT-G32 router is equipped with a single unknown signal antenna. The size of the Asus attachment is 110 x 33 x 167 mm.

Connection and training to robotics

The kit with the G32 modem contains all the necessary for connecting the elements: a cable for connecting to a computer, a dummy cable, the router itself, instructions for connecting and an installer disk.

For the Viconati router installation of the RT-G32 router, it is required for the Viconati Kilka Krokiv:

• Connect Asus to the living block, wrap it up in the hem.
• Connect the Ethernet cable to the WAN jack.
• Connect the LAN1 card to the modem using an optional Ethernet cable.
• Viconati skidannya to the factory nalashtuvan, pushing Reset.

For additional help, the following points are implemented: "Internet - Router Asus - Computer".

Nalashtuvannya

For robots with an Asus modem, you need to set up a computer card. For Tsiogo:

Automatic adjustment

Nalashtuvannya G32 is displayed through the Russian web interface. Before browsers enter IP addresses: 192.168.1.1, then you need to enter Enter. You will need to enter the password in windows. For substitutions, і in that, і in the іnshom vypad for Asus attachments, the word admin is entered, as long as the username / password was not changed. At the time of change of the date will appear.

The monitor will show up immediately, and the interface will be installed at the upper part of the side.

I will hand over the connection to the Internet on the application of some providers

Connecting to the Internet is a central part, as it allows the modem to accept and send traffic. For correct development, it is necessary to respectfully familiarize yourself from the background information. One of the most popular vendors is one of the most common types of vendors:

• PPPoE.
• L2TP.
• DHCP.

This will appear on the WAN (the first menu item). Writing the authorization of the next step of the identity. Beyond robotics algorithm - WAN; Internet connection (here you need to indicate the type of call). It is necessary to follow the instructions. As soon as information is available for storing it, it’s impossible to get to the provider.

"Dom.Ru", "Rostelecom"

To improve WAN service providers, you need to provide the following parameters:

1. Vibrate PPPoE data type.
2. Set the automatically rendered IP address and autorecognized DNS.
3. Provide the login password provided by the provider.
4. In the field "Im'ya host" to use rostelecom.
5. Natisnuti "Zastosuwati".

"Biline"

The provider "Biline" vikoristovu L2TP-connection to the Internet. To connect G32, remember the following points:

• Automatic IP acquisition.
• Enter login and password as seen by "Biline".
• In the row "Postmaster of servants" enter tp.internet.beeline.ru, duplicate it in "Hostname" (it is necessary to add a few points).
• Press the button "Zastosuvati".

NetByNet

Connect the Asus RT-G32 router to NetByNet via PPTP (VPN). There are two options for connecting: with automatic local IP and static local IP.

For automatic IP:

1. Automatic IP acquisition.
2. Automatic connection to DNS.
3. Login and password from the provider.
4. The Server field for the postmaster of the servant will be remembered.

With static IP:

1. The connection technology is used: WAN, Internet connection, connection type.
2. "Ні" for automatic IP.
3. Required IP address.
4. The mask of the image.
5. Gateway.
6. DNS servers 1 and 2.
7. Login and password.
8. Remember the point Server HeaRT-Beat or PPTP / L2TP (VPN).

To set up WiFi, you need to open the "Bezdrotova hem" tab and set these arguments to them:

• Enter wi-fi in the SSID field.
• To get access to the "network", show the "Prikhovati SSID", for such a name, the name of the access point will be unrecognizable.
• Select WPA Personal in the Authentication Method menu. At the row Shifruvannya vibrate TKIP. Tsi ways to find the moment with the most satisfying, superior and broadening.
• In the row "Front key" enter the password for authorization in the pattern. The combination is guilty of revenge not less than 8 symbols for vicarious signs. It is recommended to set a foldable password for selection by third parties. The most vipadku will have the maximum zahist in view of evil amateurs wi-fi... At the same point, you can change the password from the other.
• Natisnuti "Zastosuwati".

If the Viconano is regulated, it will be necessary to rewire the Asus and reconfigure the router connection to the fenestration.

Adjustment of Asus RT in repeat mode

A reporter is called an attachment, which is required for the improvement of the radius of the devil. A lot of modern modems are built in the reporter mode. You can set up a yogo for Asus by following the algorithm:

It is important that the mode repeatedly does not change the value for the address 192.168.1.1. So the G32 router assigns an IP address to the repeater. You can enter the Asus Keruvanna panel in three ways:

Turn the repeat to the normal robot mode, you need to go to the tab "Administration", vibrate " Mouthless router"That natisnut" Save ". The new password will appear in the window, so that the Asus RT-G32 will be re-enabled.

IPTV

Have dodatkovyh nalastuvannyah G32 will enable access to the IP TV tower. At the WAN menu, the port is selected, before which TB is connected, set a dynamic IP address. It is necessary to take care of the change by pressing the key "Zastosuvati".

Then you can view the TV viewer, reconsider your coverage. As the image is not spared, it means:

1. The provider does not need such a service.
2. Installations Asus modem G32 does not go beyond the TV settings.
3. A special type of connection is required.

DHCP

Tsya technology is not vimag and dodatkovyh tributes, but the only point is vkazіvka z'єdnannya. For tso it is necessary to switch to WAN, vibrate the type of connection "Dynamic IP".

Nalashtuvannya safety

The Asus RT router has been implemented additional functions bezpekami:

Tsi danis allow you to infallibly work with the "Internet" hedge and realizovuvati control.

Setting up the printer

Connecting without the front to the printer for G32 on the day, you can connect it without using the IP printer.

DLNA setup on a router

DLNA has given access to audio, video and photo files for TV, which can be used as a server. If on the model є USB-rose, it is necessary to connect to the USB-rose’s storage device, until access from the TB is removed. Then you need to go to the setup of the Asus G32 router for the address 192.168.1.1, enter the login name. In the "Home" menu, select the "USB add-on" item and in the new one - "File / media server".

At the item "Media Server" the switch is set to On at the item Enable DLNA Media Server. Write the button "Zastosuvati".

To enable access from a computer, a smartphone, or to add it, go to the tab "More development", set On navpacks "Allow zalny access to the resource". Pislya tsikh diy at the "Merezha" window will be accumulated, connections to the Asus G32.

Main pardons when installing the RT-G32 router

Since the installation of the RT-G32 is not correct, the reasons may be the following problems:

As soon as the problem is not determined by meaningful methods, it turns to technical support of the company-post-owner of the Internet service.

Updating the firmware via the web interface

The firmware is the name of the program, it is locked from the official site, which will explain the functionality of the attachment. Older Asus routers cannot be recognized the last version programs, tse slіd vrahovuvati when zavanazhennі.

To reflash the Asus attachment, you need to lock the file from the program, install it and start it. Then go to the router menu in the admin - Updating microprograms. The field, which has been declared, will have addresses from the locked firmware. Let's press the button "Nadislati" The Asus router itself should be updated and re-installed. Asus RT didn’t reload, but it didn’t grow on its own. Adjust G32 to update vimagatime reruns.

When buying a new G32 router for any problems, it is recommended to remove the adjustment to the factory ones. For the rest of the Asus router, the Reset button is "sunk", for which you need to pull the pins behind the help, or dart that out for 10 seconds.

You can also throw off the adjustment through the keruvanne panel. For the whole, in the address row of the browser, enter: 192.168.1.1, go to the tab "Administrator" - "Keruvannya nalashtuvannya", press the button "Update" and Ok. The skidding of the adjustment will grow, it will be necessary to complete the process of updating.

In some cases, you can be with established nalashtuvannyah... It will be displayed vipadkovo abo through a pardon in the firmware of the G32 router. As a matter of fact, do not enter the data for the adjustment, it will be necessary to speed up the updating function. For the whole it is necessary:

Visnovok

"Asus" is a simple and inexpensive attachment for connecting to the Internet. Set up the Asus RT-G32 router for instructions, it's easy to connect to the global grid. The web-interface of the visitors is Russian language, the menu is lighter and more intuitive. Asus RT is a garnishing option for home entertainment from mid-range Internet feeds. For high quality More beautifully, add professional pristriy. Summaries of the most popular Internet providers.

Plusi Asus RT

Pristіy G32 maє offensive perevagi:

1. Simplicity at Vikoristanna.
2. Little partiality.
3. The discovery of the establishment of security is not, among other things, the hijacker of Internet attacks.
4. Good-natured interface.
5. Pidtrimka Internet TV.
6. For sale in any store, the RT-G32 is the most popular modem.

Minusi RT-G32

Main shortcomings of RT-G32:

1. Do not go for high-quality business.
2. The area is not big, so you can make "Wi-Fi" to a small amount of effort.
3. The visibility of the button is increased.
4. I can overcharge the annex.

The router is an indispensable solution in offices, apartments and cafes. Behind the help of a router, or a router, you can log in to the Internet and exchange data and connections to new computers and gadgets. The establishment of such annexes of the field in the connection to the line of the Internet provider and the reconfigured signals for transmissions in the offending parties.

Description of the ASUS RT-G32 router: the name of the viglyad, characteristics

Router by way of transmission is:

• drotyanі, de for connecting attachments an Ethernet cable is required;
• dumb, de-connected attachments are implemented either via an Ethernet cable, or for help Wi-Fi technologies.

ASUS RT-G32 categorized as mouthless router Because of the advanced security functions and the ability to open the stolen Wi-Fi connection, we will forgive the onslaught of one button. The set with a router is supplied: a living unit, an Ethernet cable, a short instruction, a warranty card, a disk software security that is, let's take a look at it.

List of virobes included in the kit: living unit, router, disk with materials, instructions for koristuvach, Ethernet cable, warranty card

For quiet, hto ruin in the names of the router and router. Router is a translation of the English word router.

Zovnishny viglyad

The router has a superb design, which allows you to mount the attachment on the flat surface or close it on the wall. The ASUS RT-G32 model is available only from the white color.

ASUS logo on the top panel of the router, open it for ventilation as well. On the front panel of the router, there is a lightning indicator (PWR), childless hedgehog(WLAN), global netting (WAN) and local netting (LAN) for a number of pieces. Back part equipped with an antenna, a button to start a stolen Wi-Fi connection (WPS), a button to reset to standard adjustments (Reset), roses for connecting a wall-mounted attachments (LAN1-LAN4) and a modem (WAN) and a rose for the living unit ( Power). Bottom panel a little bit of uncomfortable material, a sticker with information, open for ventilation and mounting loops, designed for mounting the router on the wall.

WAN (Wide Area Network) - global numbered hem, for the SHG, looking for a large territory and is insured for an unbounded number of coristas.

LAN (Local Area Network) is a locally numbered net, or a CROWN that obscures an altogether small group of buys, as a rule, it cannot be used for a global net.

WLAN (Wireless Local Area Network, or Wireless LAN) - a locally numbered framing, which is helpful for help mouthless technologies... Wireless is just like a mouthless.

Wi-Fi is a technology to induce dormant local hedgehogs, yak nabula the most extended.

WPS (Wi-Fi Protected Setup) is a protocol for opening a mouthless mesh for Wi-Fi technology. The protocol of breaking up to provide additional help for koristuvachev, as there is not enough knowledge of the galuzi without mouthless fingering, and when Wi-Fi is established, it is difficult to stick to it. WPS designates an encryption task for additional capture in automatic mode That koristuvachu will not need to manually set the parameters.

Photo gallery: the name of the ASUS RT-G32 router

The pristriy has a unique design and is supplied on a random basis in a white color. On the front panel there are onset indicators: liveliness, mouthless grids, global grids, and some indicators of a local grid, at least for the rear panel, and buttons for the wiring on the bottom panel є open for ventilation and mounting hinges

Specifications

Main technical characteristics The routers are linked with the available robot modes in the netting and distribution of the signal. The very tsi characteristics are now in front of the beginning of the scope of the router.

ASUS RT-G32 router can be used in three modes:

• Mouthless Router - The main robot mode of the skin router. In a wide range of modes, IP-addresses and connected add-ons, open access to printer printers and file schemas;
• Repeat mode - a way that allows the signal from the main Wi-Fi to be added;
• access point mode. The principle of the robotic mode of the field is in the reinterpretation of the signal that is not mouthless.

Key parameters and features of the router:

• number of external antennas: one;
• size: 110x167x33 mm, without antenna height adjustment;
• wag: 198.2 g;
• frequency range: 24-25 GHz;
• Supported WLAN-free protocols: WEP, WPA-PSK, WPA2-PSK and SSID function;
• keruvannya we will step on a number of hedgehog protocols: UPnP, DHCP, DNS Proxy, NTP Client, DDNS, Port Trigger, Virtual Server, Virtual DMZ, VPN Pass-Through;
• control and filtering of the hemmed traffic through the netting screens: NAT, filter IP-address and Mac-address, filter based on URL;
• available WLAN robot modes: 802.11b, 802.11g, 802.11n;
• Wi-Fi setup via WPS;
• Mouthless connection speed: up to 150 Mb / s.

Connecting and preparing before setting up the ASUS RT-G32 router

Oscillations of the ASUS RT-G32 model are valid until childless annexes, then the robot of the router is working in two modes: wired, a special cable is required for installation, and a mouthless one, for which installation the mother has a WLAN adapter.

An Ethernet cable, with the help of which it can be implemented for a long time, is supplied at once from a router.

For the establishment of a wake-up call, you need a visonati as follows:

1. Connect the modem with an Ethernet cable to the WAN port of the router. The blue color WAN port is located on the back panel of the router.
2. Connect the PC to the LAN port of the router using an Etherner cable. The LAN port is also located on the back panel, albeit with the zhovty colors.

Connecting a PC to an Asus RT-G32 router

Establishment of mouthless z'єdnannya

The installation of Wi-Fi from a computer display via a WLAN adapter.

WLAN-adapter is a special module, which allows you to connect to LOM or GVP without cable connection. Before the dumb adapters are connected to the plug-in interface. The adapter is inserted into the PC case or vikorisovuyutsya to connect USB interface... In addition, the attachment of such a characteristic is adapted to a wide range of heights, standards of communication, Wi-Fi protocols, a number of antennas and іnshim.

As a rule, a WLAN adapter is included in the set of laptops, netbooks and attachments "2 in 1". Stationary computers are most often not equipped with such a built-in device.

If you є need a WLAN adapter, if you don’t want to mess with your connections, I recommend you choose from the add-ons with the interface USB connection... These adapters can be connected to the USB port and cannot be plugged into the computer case.

For the establishment of a mouthless system, it is required:

1. Connect the router and the modem.
2. Vikoristovuchi Etherner cable connect the WAN port of the router with the modem. The rose WAN port is located on the back panel of the router;
3. As long as there is no WLAN adapter at the attachment to connect, you need to install it. How can you wonder at the instructions to the adapter.
4. Have available Wi-Fi just know the connection from the "default" and come to the new one.

Connecting a PC with a WLAN adapter to a router

For changing the SSID of the router "default" display system Authentication.

Setting up the automatic rejection of the grid address from Windows

The instructions are described on the Windows 7 application, you need to check:

1. On the panel of the building, which is located in the lower right corner of the screen, click on the hedge icon and the left button of the Misha vibrate with social access". The icon of the trace for the hour of the day is similar to the image of the monitor.

   Vibiraєmo "Center for fencing and sleeping access"

   A bezrotova framing is similar to a growing diagram.

   At good wives signal icon

2. At the menu, click "Change adapter parameters".

   Vibraєmo "Change of adapter parameters" at the window "Center of kervans with festoon and external access"

3. Vibrate need a card. If you transfer the vikoristannya of a single line, then the card will be marked as "Connected to a local mesh", inakshe - "Bezdrotova mesh". Click the right mouse button on the blank card and in the menu, vibrate "Power".

   Vibiraєmo "Vlastivosti" at the menu of available diy

4. Click on TCP / IPv4 and press the Power button.

   Vibrating "Internet Protocol version 4 (TCP / IPv4)" and the onslaught of "Vlastivost"

   5. Vibrate "Regenerate the IP address automatically" and "Regulate the DNS server address automatically".

   Vibrate the item "Render the IP address automatically" and "Render the address of the DNS server automatically"

   6. Press OK.

Video: Setting up automatic IP address rejection from Windows

Login at the registered address: IP-addresses, login and password for changes

To log in to the router's web interface, you need:

1. View whether a browser.
2. In the address row, enter 192.168.1.1 and enter "Introduced".
3. Enter "admin" in the window in the fields of the name of the clerk and the password.
4. Natisnut "Nadislati".

To enter, enter the name of the clerk and the password that was set for the deputy, and the pressure "Nadislati"

For thinking about all the pererakhovannyh vische recommendation browser to redirect you to the side of the router.

Simple and easy router web interface

The process has an interface for the router RT-G32, it doesn’t have a wizard for the fewer folding devices. The design is unforgettable and eye-pleasing. The structure of the web-interface is optimized prior to user-friendliness, which will ensure the efficiency of the process of interaction with koristuvach. I could go without any special difficulties in the setup for the opportunity to easily change the interface. The whole function is roztasovana in the mountains of the side, for that there is no need for shukati in the menu items, like the price in bagatokh programs. For the less important є the appearance of the father-in-law, the ikon of which will be moved to the right upper codend of the screen. The function of the helper of a polyag at a time-consuming occasion of a koristuvach about pardon robots with a program. Moreover, the assistant will talk about the possibilities of the interface and available functions... Such a pomichnik, yak on me, is douche brown for the underdetermined koristuvachiv.

Change the login password to nalashtuvan

To enter a new password for access to setting up the router, you need:

Setting up the ASUS RT-G32 router

The RT-G32 router will adapt a number of robot and global mesh modes. Available types of WAN connections:

• L2TP (Layer 2 Tunneling Protocol) - tunnel hedge protocol, splitting for the creation of private virtual fences and allowing the organization of such fences from the given priorities. Do not take revenge on the victim of the tribute and mechanism of authentication.
• PPPoE (Point-to-point protocol over Ethernet) is a channel mesh protocol, which is used to authenticate a koristuvach, to take care of the data and encryption. The head of such a spoluca is the organization of the robotic skin connection at its own canal, tobto. okremo.
• PPTP (Point-to-Point Tunneling Protocol) is a point-to-point tunneling protocol that will set up a special tunnel from the server. PPTP will be victorious for organizing local fences so that I will secure the transfer of data from koristuvach to koristuvach. Authentication of corystuvach can be done through different mechanisms, most commonly - MSCHAPv2 and EAP-TLS.
• static IP addresses. Sign up for a specific subscriber and become unaware of the hour of re-connecting to the Internet. The provider can see the post-IP address. The service is often paid, some of the IP-address is interlaced.

Setting up L2TP connection

If you want to use the L2TP protocol, you will need to upgrade:

Setting up PPPoE connection

For vikorstannya PPPoE protocol follows:

Nalashtuvannya PPTP

Nalashtuvannya PPTP vimag of such diy:

Setting up a static IP

If your Internet provider needs to be connected for the type "Static IP"

Mouthless Internet - it’s still handy, a little bit mobile, which is impossible to say about a mobile phone. To set up Wi-Fi, you need to know:

Do not go to think of a good password for your Wi-Fi connection; To unite the evil I rajah vikoristovuvati a combination of letters of the lower ta upper register with additional numbers. For example: "LasT19Day05".

Have established Wi-Fi z'adnannya virobnik proponyu function of prikhovvannya yogo name. Tse to secure a pre-dodatkovy zahist to the evil one, however, you cannot know the nether in the list of available ones. You will have to enter not only the password before the hour of connection, and I will hand over the SSID. On the skin attachment, it is necessary to kill the leash once, at the first connection. If you want to pick up the function, add "Tak" in the "Prikhovati SSID" field.

Nalashtuvannya IPTV

IPTV is a tse type of Internet TV, which is used for broadcasting TV-channels in high-quality broadcasts. The IPTV function will be available only if you are actively connected to the Internet.

To connect IPTV you need:

If you want to turn to the side of the WAN alignment, at the "Vibir port IPTV STB" row, vibrate the "Zastosuvati" port and natisnut. The field "WAN connection type" is empty.

The field "WAN-connection type" is empty, at the "Vibir port of IPTV STB" field, select the required port and press the "Lock" button

Local LAN and DHCP hedge

LAN, or LOM - tse local hedge... DHCP is a LAN protocol that is used for configuring. It is easy to see how you need to adjust the LOM for the ASUS RT-G32 router:

Adjustment of ASUS RT-G32 in reporter mode

Reporter - attitudes, signs of improvement to the radius of the childless hedgehog. What kind of vipad is needed? How to catch Wi-Fi fiddly or not to catch in any kind of surroundings.

ASUS RT-G32 router can be a repeater, some custom mode is available. At the set up of the router, such a robot mode is called "Repeat mode". What you need to do is:

Skidannya nalashtuvan to the factory

Skidding to a value for a change can be made in two ways: by a button on a router and a button on a web interface.

Skidding nalashtuvanny button "Reset"

Some time later, the router is connected to the living unit, and the living unit is connected to the outlet.

On the back panel of the router є there is a built-in button marked "Reset". We will fire the object for three seconds or more. Nalashtuvannya thrown off.

Skidannya nalashtuvan through the web interface

The web-interface of the router is not only skidding, but rather allowing you to save the configuration in an environment file beforehand, so that you can add it to update the configuration of the file.

If you are trying to get rid of it for the first time and have never taken care of it before, I recommend it. I’m going to forgive your life, to spare you the need to stay in one hour or to re-install the router from scratch.

For renewal, saving and preservation of the installation, it is necessary:

As long as you have already taken care of the adjustment, for you simply do not want to take care of it, miss the third croc. And if you do not need to use it at the closed ones, then you should go to the fourth crochet.

Updating the firmware of the ASUS RT-G32 router

Wirobnik croc by croc describing the process of updating the firmware of the router in the menu item "Administrator" on the tab "Updating microprograms". Check the new firmware version on the ASUS website and follow the instructions:

Video: connection, adjustment and firmware of ASUS RT-G32 Wi-Fi router

Yak rewrite router

Click on the back panel of the additional attachments є the live button, which allows you to open the router without connecting it to the living block. However, in this model, such a method is inaccessible through the visibility of such a button. For those who use ASUS RT-G32, they need to use the web interface:

In the Internet, you can create free articles about those how to set up a router in the repeating mode, but most of them do not need all the subtleties. The reasons for the statute will be attributed to all the nuances and details that are necessary for the nobility, as the router is capable of expanding the framing. For given the butt there will be vikoristovuvatsya model Asus RT-N12 +. The meaning of what kind of organization is basically a possession, so I distribute it, I do not have. Tse can be a virobnik.

Mainly the reporter's staff is to expand the range of the childless education. The need for you to appear in a quiet room, if the signal is not displayed, you need to cover the entire space of the apartment. A large number of models of everyday routers can be victorious, not less for the signs, and for the reinforcement of the hedge, the built-in attachments. Zagalna scheme robots are shown in the picture.

At the same time, it is important to see that there will be only one wi-fi fancy. The other router will duplicate the parameters of the head one. At the same time, you will be able to get out of the hem, and switch from one router to the other in automatic mode. Pidsiluvach also allows you to connect via a cable cutter.

You can reduce the Wi-Fi signal before connecting the repeater:. Mozhlivo, zm_n, described in the statty, will be enough.

Yak nalashtuvati router Asus yak repiter?

1. View the admin panel of the router. For all browsers, add the address 192.168.1.1. To appear in the authorization window, you need to enter the login key. Iakshcho stink didn’t change, because it would be admin admin. As soon as we changed the date, the hour was set up, to add new meaning. If you log in, do not log in, it is recommended to be surprised report to the instruction on inputs on 192.168.1.1. If problems have come to light, read the article about potential problems.
2. Go to distribution Administration — Robot mode. Slide toggle switch stand at the camp Repeat mode. Then let's go to the fix. Press the button for the whole Save.
3. The new window will have a list of available mouthless z'єdnan... Slid natisnut on the name z'єdnannya, yak will be dubbed.

1. In the field, enter the value of the password for the entrance in the data entry and click on the button Connection.

1. Step-by-step crochet passes the nalashtuvannya. For a number of slides, mark the checkbox next to the row Pick up the standard adjustments. Then you can save the parameters for the click on the button Zastosuwati.

1. Start the connection process. Further completion is required.

1. As soon as all operations are carried out correctly, they will appear as soon as the line has been set. The butt is shown in the image.

Dali slid reconversion, WAN port does not have a problem mesh cable... You may also not change the SSID value. The supply of the IP address should be displayed more respectfully. Zagalom a router for robots. Win a signal relay. At nalashtuvannyah you can pachiti, but only one is available. Put the switch to the router, the signal is strong.

Pidsiluvach can be set in the same moment, if the signal is є, ale weak. It is important that a hemline is available, some pieces of paper are also required for the translation of all nalashtuvans. If the reporter is re-connected or re-connected, the net will be in automatic mode, and all the possession of the re-engagement will be in one net.

How to log in to the administrator's section of the Asus router, if there are no connections?

When the router is functional, it is not possible to go to the admin panel using the traditional method. Nalashtuvannya at 192.168.1.1 will be unavailable. The price is tied to the fact that the main possession of IP-addresses in automatic mode is for all annexes before they are connected. Otzhe, if there are 3 options, please go to the panel.

1. In the browser, enter router.asus.com. When you are locked, you will be shown in a window, in which you will see the ip address of your router automatically. You can then log in to the admin panel. Ale pid hour of reversal given the way, possession, indicated in the butt (Asus RT-N12 +), not known. You didn't get to the panel.
2. Vyrobniki of the Asus company vipuskayut not deprived of possession, but also utilities for the new. Bezposeredno for finding the ip-address of the reprint buvs of the software under the name Discovery. Compliance is guaranteed. It is possible to secure the software. Її slid zavantazhiti, rozpakuvati on the workstation and stand up. If you want to, you can start and press the button Poshuk. If you know you need possession, press the button Configuratio Get lost in the list of parameters.

Foldable can win the leash in the fall, if anti-virus program close access to the robot for utilization. Todi antiviral zahist slid znyati.

1. The third option is to know the IP address in the panel of the main router. For a full slide, go to the break List of clients. There you need to vibrate and know your parameters. On the new one you can go to the admin panel. For TP-link, the data is displayed at the DHCP - DHCP Clients List.

How to turn possession to the traditional method of functioning?

In some cases, there is a need to turn the robot's possession to the standard mode. It’s easy to get it done. For the ear, you need to go to the admin panel. There, at the razdіlі Administration Introduce a new robot mode. Vin maє buti of rulings Mouthless router (for replacement). Writing a lot of snapshots by pressing a button Take care.

The router in the repeater mode is to reach the brown setting, a meta-yak polyagaє in that, expanding the i.

On the Internet, you can find a lot of articles about those, how practical this kind of attachment can be taken.

A little more of such people do not depend on the power supply, but only more to get lost in the corystuvachіv. Well, at my own devil, magatize, explain the folding speeches as simple as possible.

It’s a simple bit of a situation, if you don’t catch the Internet in the bedroom or in the kitchen, it’s easy to look for the help of a repeater or another router, which can be used as a repeater.

Now є sense, talk about those who set up another router like that, shchob win mg.

Ale in front of the cim varto, clarify a few moments, as you can feel that you can use a router as a reporter for any problems.

In some cases, a router is suitable for a victoriannya yak repeating

Fakhivtsi to converge on the Duma, how vicoristovuvati it in such a way є sense, if you don’t need it.

In іnshіh vipadki more beautifully add a power repeater. First and foremost, there are several reasons, but itself:

• it’s far from expecting є the ability to prevent the signal of the same quality as going from the main router;
• signal stability is also not easy to suffer;
• so far do not expect to go in successfully to the viconati of all manpulations to establish such a creation for the first time.

The problem is that the skin router can be adjusted in a special way, I want a fabulous algorithm to display such things.

Porada: Pick two routers from one virobnik. Todi offending is more beautiful.

Press the "Disable WPS" button. We will not go into details, as well.

4. Re-enable the other router to reconnect it from the outlet and reconnect it. Those same can be zrobiti, if natisnuti on the writing "click here", which appears to be written in front of the croc.

5. Go to the "Network" menu and the "LAN" submenu. In the IP Address field, enter a new IP address. Guilty but the one who is more responsible for the one, like the one, is the one.

So, here's a snippet of 192.168.0.1, but now you need to enter 192.168.0.2, as shown on little 6. Press the "Save" button to save the setting.

6. Now, in the address row, enter the address, where the bullet is indicated at the front of the crotch.

Small. 6. First step of setting up the router in repeat mode

7. The next croc will allow you to switch to another router. I know to go to the "Wireless" section and to the "Wireless Settings" section.

There are the following parameters for us:

• "Wireless Network Name" - if you want to distribute another router;
• "Region" - region (land, where you live);
• "Channel" - a channel (they said they were 6 for the butt);
• "Enable WDS Bridging" - just check the box next to WDS.

8. Press the "Survey" button to continue to the robot.

Small. 7. Setting up another router and connecting to the first

10. If you want to enter the password before the fancy, before you connect it. To do this, enter the type of encryption that can be used in the first router (set in the "Key type" field).

Small. 8. Finishing the connection of another router before the first

From and everything! Now the ma pratsyuvati is normal.

Note: WDS is a repeatable mode.

Dosage foldably.

Along with this procedure, you can vibrate the very algorithm that you can use to connect either two routers or another one, which is repeated.

Viglyadaє vin like this:

• switched on at the first opportunity to receive a signal by the reporter;
• put on both the same channel (if it is necessary, do not wait, albeit in the nalashtuvannyah є the first point, add the same meaning);
• switch to other until the first in repeat mode;
• korystuєmos.

The procedure, vicladena vische, is shown from the butt of routers.

In some cases, there is a point called "Repeatable" (not "WDS"), I will add a Russian interface in the installations.

Vіn can be known in the small distributions, so you will have a chance to pochukati yogo. Ale yak bi was not there, like the point є, you can definitely know him.

And why shouldn't there be anything in me?

As long as you don’t go, є kіlka options:

1. Try the viconati all the descriptions of the food and the procedure again, from the ear itself.
2. Write in the comments on the top of the article, on which stage you have problems that you can help you.
3. Beast for help to the virobnik of annexes (I want one for two), as you are victorious.
4. Viklichte dodomu spetsialista from your provider. Tsi people are guilty of additional assistance to their clients by using the Internet in a way that is done by hand.

Ale manipulation is not so abundant there, as you can sit at the first glance, then all the viconati can find a koristuvach-pohatkivets.

Head - follow the algorithm described above and dotrimuvatisya (I would like to be approximately) in the order of diy, about which they were also mentioned earlier. Successes at nalashtuvanna!