Oblikovy recording of the Asus router. How to log into the Asus router with different connection methods

Before you start adjusting the router, you will need to adjust your computer to the correct adjustment, and also clarify the part of the connection parameters. Yak tse zrobiti, the report is described in our instructions:! If the computer is ready, it will start without a second before setting up the router.

Pidklyuchaєmo router:

• Includes a router in the netting behind an additional adapter, which is included in the kit.
• Operator's cable "on pidlozi"
• One cable from the router card kit ( LAN 1) that computer ( Ethernet) (Small. one)

Check out, leave on the router and light up diodi kharchuvannya (PWR), active first port (LAN1) that WLAN (AIR), hocha buvaє, scho stay at the router settings.

Setting up the ASUS RT-N10 router

2. In the address row vkazєmo IP-address of the router: http://192.168.1.1
When the address is entered on the screen, the authorization window appears for access to the router ( Small. 5). To enter the configurator, enter:

• login - admin
• password - admin

3. Not let us know the system will be automatically connected through the configurator, for whom there is enough Dalі": Small. 6

4. Yaksho your ISP is needed Protocol - Static IP addresses i itself 192.168.1.1 (yak z'yasuvati, which protocol you have, is described in our report: Preparing a PC before setting up a Wi-Fi router) SCRAP", At the deposit LOM IP Addresses, then change the IP address of the router to 192.168.100.1 , for whom to natisnut " Zastosuwati»That router is re-enabled. Re-engaging is also the same for the computer and it is re-entered through the browser into the router, even through the new IP-address ( Small. 7):

5. If the protocol is displayed as a destination, or at your operator's IP address, it is passed Clause 4.:

6. It’s impossible to pass the auto-adjustment successfully, but at the same time. WAN", De zi list vibrate Your operator's protocol ( PPPoE, PPTP abo L2TP):

7. The IP addresses and DNS are stored automatically from the provider, or I will manually register them. The parameters are also based on the instructions: Prepare your PC before setting up a Wi-Fi router. Vkazuumo at vіknі Іm'ya koristuvachі password, from the operator's vimogs, that link, which is required, behind the physical address:

8. If the router is locked and reassigned, it is logged in before distributing the router. Mouthless hedgehogs.

Here we will aim at the Malunky, then add the parameters of the Wi-Fi maybutton:

• "SSID" - you can overwrite the pattern or change it to your liking;
• "Mouthless mesh mode" - it is also recommended to vibrate, if the computer does not accept Wi-Fi class N (specified in its specification), selectable mode "g Only"... Not recommended vikoristovuvati zmіshanі modes "... mixed";
• "Channel" - replace "Auto" radimo vibrate specific from 1 to 13 (for example 6 or 9);
• "Authentication method" homemade framing from connection to supplementary susidesJ) - recommended vibration WPA-Personal- the most advanced encryption method, which makes it safe. The whole regime is victorious for the maximum efficiency of the exchange of data. WEP encryption reduces the speed of access to fencing, and WPA2 type is not accepted by all extensions, which are connected to the router;
• "WPA encryption" - for the WPA conversion method, vibrate TKIP;
• "Front WPA Key" is a password that will steal your pattern. It is required to enter, as indicated. Method of reconverting the authenticity from the foreground point - the password is to be thought up independently and to be used in the given field, to memorize it and to write it down in the notebook.

Vitannya! I have already written here the universal instructions, but the people will need the bread and the specific species. It’s the same for a day, just go to the ASUS router. So! For any ASUS router. One more universal instruction ale the same for the whole vendor.

If you don’t want to go into the adjustment - write about it in the comments, we’ll get it right at once. The first option is to make a joke on our website for your specific models(for example, ASUS RT-N12). The required statistics will have a lot of good information!

Garyacha instruction

192.168.1.1
Login - admin. Password - admin

Yaksho, it’s not gone - read report to describe lower.

Povna instruction

Enter at the setup of any router, including ASUS, you can open it on the next steps:

1. Connect to the router.
2. Go to the web configurator authorization side.
3. Entering the login and password.

Connection

You can connect to the router in two ways - via Wi-Fi.

As soon as you connect, be in any way to the router - go to the offensive croc.

With the wire the most folding - correctly vibrate the port:

Beastly respect for the drawing. It is important for us to connect the computer, or the laptop itself to the LAN ports - wake up. As soon as the provider's cable is connected to the WAN port - it can be overridden on the server, we can’t tell the price. At the same time - one cable to the router, and one - at the roses of a simple picture of a computer or a laptop:

You can connect via Wi-Fi - here you can be very flexible. For the fancy is not the moon all at once, and it does happen, for the passwords do not come. Headlines for connection:

1. To make a joke of a hem. Call us a great signal and, in the name, to revenge ASUS (as they didn’t change anything). As a rule, you will be able to connect first without a password. In the bottom view, look at the bottom of the router - there, on the sticker, write the name of the Wi-Fi hedge and we need a login and password, like this:

1. If you don’t know the password, you cannot know it, or else they just screwed up, create discounts at the factory. Click on the back panel of any ASUS router є Reset button (you might have it plugged in, but by the way, you can’t see it shy) - press it when the router is turned off for 10 seconds. The router is re-engaging and setting up at the factory.

Axis and all science in a nutshell. As a result, if you are guilty, be sure to connect from these methods to your router. Yaksho winyє folding - lower є comments, write!

Authorization side

All the settings of the router can be accessed through the so-called web configurator - on the routers of the website, which you open through the browser, you can use everything you need. The whole process of actions is called "enter at the menu" or "enter to the administrator". Addresses for promotions for ASUS routers:

192.168.1.1

Іnsha alternative, where addresses were changed by raptom:

http://router.asus.com

The addresses are identical, the other one is simply transformed into the first one, but then the red one with the new addresses. Symbolic addresses are not available on all routers! Proceed with the digital IP address!

Have you crossed over? Chi did the form entered? How can the side be seen at once? Well, read the offensive breakdown. Yaksho ni - go to the break merry mercy for the development of the description of the skid.

Go absolutely any browser. Google chrome, Opera, Yandex Browser, Mozilla Firefox, Apple Safari etc. And also for any operating system - Windows 7, Windows 10, Mac OS, Linux, Android and iOS.

Login and password

Call me, on my memory on Asus, when you first enter the setup, you will enter the panel without entering a login and password, and then you will install it there. It's all one thing to ask for a login and password, standard value regional record:

Login - admin
Password - admin

In addition, you can check the following on the sticker on the bottom of your router:

Do not confuse the password from the router with the password for Wi-Fi - there are no problems!

Any problems

They didn’t help them, they didn’t help them. The options for the pod may be even more abundant, I recommend that you try to get through the skin points, and if you fail again, write your situation in the comments with details.

For a non-intelligent situation - rewrite your computer and router. For statistics - tse douzhe often additional helpє!

Інші points, on how varto I will be respected in case of failures due to connections:

• Reverse the cable - what is the connection? And what about the work of the computer?
• If you don’t connect with a cable, try Wi-Fi! I navpaki. Chi pratsyuє? Likewise, a change of methods often resolves the problem of fixing.
• The main reason for the problem with the connections is for changing the settings of the router (sending the settings through the RESET button), or changing the setting of the slotted card on the computer (seeing the resetting or installing Automatic rejection IP address).
• Even worse - try to view the adjustment from your browser.

From and everything. Thank you, you all went out of the way of intelligence like a stool of instruction. Якшо ні - comments below. All to the quick!

You will go to the menu for setting up the router, the modem or the optical ONT terminal via http://192.168.1.1 and “ special cabinet»Your attitudes are not visible. How robiti? Viklicati maystri and pay pennies? Do not oversleep and do not get tired. Let's try to solve the problem all at once and log in to the router ?!

I think, on the cob, there are three of theories:
192.168.1.1 - the whole IP-address (AiPі) of the stitching attachment. For promos, on the routers, the net is registered: 192.168.1.0/24. In other words local hedge On the router, Persha (young man) is set up in the address sub-address - 1, and by connecting to the local hedge, the clients will be vicoristovuvatisya addresses from 2 on 254 ... Vzagal, do not take the rule, and so it is established at the most of fancy outbuildings. Zyxel Keenetic, Lincsys, Cisco, TP-Link, Upvel, Sagemcom, Asus. Є, really, vinyatka. For example, for D-Link and Netgear routers, for the choice of vikoristovuyutsya іnsha pіdmerezha - 192.168.0.0/24 and according to the ip bude -. Ale, yak, do not twist, digits ізні, but there is only one sensor - IP 192.168.1.1, 192.168.0.1 - the whole address of the hemline attachment in the fancy. Our vipadku -

Yak go to the router

Now let's move on to practice. Go to the setup of a WiFi router or an ADSL modem, please enter the address in the browser: http://192.168.1.1. With the whole protocol on the cob - http: // or www - it is not necessary to type, the browser itself will automatically be required.

If you have access to the installation є, then you can punch the authorization form on the annex, if you need to enter a login and password (you need to log in to the router at 192.168.1.1 to enter: admin / admin):

Price means that the local fence has been set up, the router is not available and there are no problems with access to it. We can see the best option for the development of the pod - the browser looks like the pomp "Story is not available" or "Do not give access to the site":

Problems with the accessibility of the web interface can be rather different. Let's see some of them:

Instructions to log into 192.168.1.1.

Croc 1. Reconstruction of connection activity to fencing.

The most common reason for the unavailability of the router is the price of mesh cable.

At the same time, it is not necessary to bind the cable by navmisno - the connector can simply go to the pink blank pay on the millimeter and not at all practical. Make sure to reverse the integrity of the cable - maybe it’s squeezed here for some reason. I also respect that the LAN cable is responsible for connecting to the LAN port, but not to the WAN port.

You cannot access 192.168.1.1 through the WAN port. Tsey port vikoristovuєtsya for the connection of the provider to the cable. I only!

Krok 2. Reversal of indicators in the hem.

Here I am on the lookout for indicators of physical data on the computer's board, as well as on the router itself. How can you imagine the stench? As a rule, the price of greens is svitlodiod. If the framing is active - the indicator is on or the morgue is on. We take your pristіy to the hands and wonder at the face panel. When the power is on, the Power indicator is guilty - it means that the setting is on. When you are astonished at the indicator of LAN ports, the stench will ring out, or simply by numbers - 1, 2, 3, 4.

When the patch cord is turned on to the LAN port- The indicator is responsible for the port number. If you don't want to burn - try turning on the patch cord and turn it on until the middle of the day. If the indicator does not fall asleep there - try everything the way it is. Didn't it help? Todi at you faulty router - bring it to the service.

Croc 3. Reconstruction of the nalashtuvan of the hem.

At all stages, we need to reconsider the adjustment mesh adapter- Yaky of the prescriptions of AiPi. Scoop to eat at the customization of the fancy dress operating system Windows XP requires the Start button, vibrate Merezhevі connection... Windows 7 and Windows 8 have an onslaught of Win + R keys. Open window Launch programs. Here you need to type in the phrase. control panel.

Open the Windows Kerovan panel, you need to know the section "Merezha and Internet".

Klatsaєmo on a new left button Mish. See also:

Now, you can open a special router account via 192.168.1.1, click on the link "Center for control of fences and access":

Vibiraєmo menu item " Power " ... See the window of the authorities Connected by the local grid:

Vibrating "Internet Protocol version 4 (TCP / IPv4)" is clicked on the new two buttons with the mouse button. Most of the IP settings are set to be in automatic mode:

This is how the system is set up in a row. Try to keep the computer connected to the framing. If it’s a DHCP server, Windows will reject the given IP address, mask, gateway address and DNS.
Ale yak bootie, if there is no DHCP server in the hem, or is there a fault in the configuration? In all cases, log in to 192.168.1.1 into a special account on automatic adjustments If unavailable, then the IP will be available due to the special support of Microsoft - 169.x.x.x. Zrozumilo, with this address you will not be able to access the address of the WiFi router. To that, to enter the configurator, you will need to register the AI-Pi - put a tick "Vikoristovuvati will step on the IP-address" and the address will be written on the picture:

Tobto maє buti is prescribed for:
IP addresses 192.168.1.2
Mask 255.255.255.0
Gateway 192.168.1.1
A different DNS server 192.168.1.1
Alternative DNS server 8.8.8.8
Prescribed, the onslaught of the button "OK", the snakes nabuli rank. I know how to launch a browser and try to go to the router at 192.168.1.1. A special cabinet of the router, like and earlier, inaccessible ?! Well, well, yes, yes.

Croc 4. Revised web browser.

At the Keruvannya Panel vibrated "Merezha and Internet" :

Now you need to vibrate the "Browser Power" item and open the "Connect" tab. Onslaught on the button "Nalashtuvannya pryzhі":

Zhodnykh proxy-servers are innocently spelled out.

May be on uvaz, where the web browser is a chain of programs and you may not be able to work correctly. It is obligatory to install another browser - Firefox, Opera or Chrome - and try to use 192.168.1.1 to go to the router (Zyxel Keenetic, TP-Link, ASUS, etc.).

Krok 5. Vuzol can be blocked by a safety system.

It may be that your modem or router will become unavailable from the local via incorrect adjustment Windows firewall or the firewall you installed. Schob tse viklyuchiti, robimo like this:
A security system installed by you (antivirus, firewall, etc.) has been installed by you.
Likewise, you can stop all options by turning on the standard Windows Firewall. You can also block IP 192.168.1.1 for any purpose. Go to the Keruvannya panel, vibrate the "Windows Firewall" distribution and then deactivate the packet filter by clicking on the "Vimknuti" value.

On Windows 7 and Windows 10 Tool Panels shukaєmo distributed "Security System" -> "Windows Firewall" that select the menu item "Windows Firewall".

The key is available for private and public hemlines.

I know how to re-access through 192.168.1.1 to a special cabinet for a modem or a router.

If you didn’t help anybody from the reinsured person, then you will be deprived of new options for development:

1 option- The IP address has been changed on the router. So that it is not 192.168.1.1, but the lowest IP is 192.168.0.1, 10.90.90.90 is too bad. At the same time, it will be unnecessary to remove the configuration parameters by attaching the "Reset" button on the rear panel to add that new knowledge.

2 option- Virusi shkіdlivі programs... Infection in the Internet is a lot of infectious diseases, including viruses for routers, which change the way they have been set up, for which to go to the web interface, it is also problematic to reach the school. Find out if you can convert your computer and laptop to a virus.

3 option- invert, you can go to 192.168.1.1 from your phone or tablet by connecting to WiFi. The password for connecting to a childless hem is often written on a sticker, glued to the lower part of the device. If not, then, as an option, you can try to speed up the WPS function. The PIN-code will be written on the sticker.

4 option- Hardware imbalance in your modem and router. And here the only vykhid is to carry them to the service.

Video lesson:

There are 2 options for most people:
1 - Skip the settings with the "Reset" button, as described in the description, so that access to the modem can be passed through without problems. If you take it to the house, after the parameters have been adjusted, the router will be clean, and it will be done from scratch.
2 - Shukati of that one, having set up your device and password. As soon as the master-installer of the provider has been installed, then, it is possible to install the same on all attachments. As soon as the parameters are adjusted, it is difficult to guess that it’s hard to guess, and all one thing will happen to “Reset”.

Most popular annexes, scho vikoristovuyu address 192.168.1.1:

Ustatkuvannya Zyxel.

ADSL modems:

OMNI ADSL LAN EE, OMNI ADSL LAN EE, OMNI ADSL WLAN EE, P-660H EE, P-660HT EE, P-660HT EE, P-660R EE, P-660RT EE, P-660RU EE, P-662H EE, P-662HW EE, P-741, P-791R v2, P-792H EE, P-792H v2, P-793H, P-793H v2, P-794M, P-841, P-844 EE, P-870H- 51A V2, P-870HW-51, P-870HW-51A V2,
P-870MH-C1, P-871 EE, P-871M, P-872H, P-872HA, P660HN EE, P660HN Lite EE, P660HT2 EE, P660HT3 EE, P660HTN EE, P660HTW2 EE, P6606RT602 EE,

WiFi Router:

BG318S EE, NBG334W EE, NBG460N EE, P-330W EE, P-334 EE. , Keenetic Ultra.Keenetic 4G II, Keenetic Giga II, Keenetic II, Keenetic Lite II, Keenetic Omni, Keenetic Start, Keenetic Viva, Keenetic Extra, Keenetic Extra 2, Keenetic DSL.

(Kinetics of another generation Mayut hostname my.keenetic.net)

Ustatkuvannya D-Link:

DSL-2640U B1A T3A, DSL-2640U BRU C, DSL-2640U BRU C2, DSL-2640U BRU CB, DSL-2640U BRU D, DSL-2640U RA U1A, DSL-2740U BRU C2, DSL-27

Ustatkuvannya Tp-Link

The interface for setting up the attachments of the viglyad's virobnik is as follows:

ADSL modems:

TD-W8901N, TD-W8950ND, TD-W8951NB, TD-W8951ND, TD-W8960N, TD-W8961NB, TD-W8961ND, TD-W8968, TD-W8970

Wi-Fi router:

TL-WA701ND, TL-WA730RE, TL-WA750RE, TL-WN7200ND, TL-WN721N, TL-WN721NC, TL-WN723N, TL-WN72N WN751ND TL-WN781ND TL-WR702N TL-WR720N TL-WR , TL-WN823N, TL-WN851ND, TL-WN881ND, TL-WR941N, TL-WR841N, TL-W8 WR941ND, TL-WA5210G, TL-WA7510N, TL-WR743ND, TL-WR843ND, TL-WAN5210G, TL-WR843ND, TL-WAN5210G, Acher C2, Acher C7, Acher C9, Acher C20, Acher C50.

So same vikorystyuyutsya domain name: tplinklogin.net, tplinkwifi.net, tplinkmodem.net.

Owned by Asus

The web interface of the router in older versions:

ADSL modems:

D6300, D6200, DGND3700, DGND3300v2, JDGN1000

Netgear Router:

R6300, 6200, WNDR4700, WNDR4500, WNDR4500, WNDR4300, WNDR4000, WNDR3800, WNDRMACv2, WNR3500L, WNR3500Lv2, JNR321, WNR2200, JWNR2000, JWNR2NR6102, WNR2NRv2, WNR2NRv2, WNR2NRv2, WNR2NRv2

Router connection

Take the router out of the box, stand by the manual for you. Connect the power adapter to the kit at the power outlet on the rear panel of the router and a 220V outlet. Connect the main mesh cable (the one that you were given near the apartment when K-telecom was connected to the mesh) to the INTERNET port, and connect the mesh cable with one end to one of the numbered LAN ports on the rear panel of the router, and computer. Instalation disc, which is included with a router, you will not know it.

Important: Do not connect the main mesh cable before the numbered LAN ports! It is necessary to give a sound to the whole booth when the failure of the service is given.

Setting up a router

Open the window in the browser, enter the address 192.168.1.1 in the address row and enter the Enter key on the keyboard. Seeking to the ciu address, bachimo winko authorization from the web interface of the router. At the "User Name" row, the word "admin" is entered in Latin (English) small (great) letters without paws, at the "Password" field - "admin", in Arabic numerals without paws. Let's take the onslaught of "Log In" on the screen, or press Enter on the keyboard.

A message will appear in front of you with the configured router.

Schob change the interface in the "Language" field, select "Russian".

Teper varto vibrati paragraph " Dodatkovі nalashtuvannya»For setting up the Internet connection.

At the end of the day, you need to vibrate the "WAN" item.

In the field "Type WAN-connection" you need to vibrate "L 2TP"

Schob save nalashtuvannya, natisnit "Zastosuvati".

Nalashtuvannya mouthless z'єdnannya

For nalashtuvannya wi-fi connection select the item "Bezdrotove" on your router. In the field "SSID" it is necessary to enter the name of your childless hem (digits and Latin (English) great and great letters). Інші dotty majut but also indicated are also presented on the little one below.

In the "Front WPA Key" field, you need to enter a password for a dumb line. Win can be summed up in the great and small letters of the Latin alphabet, as well as Arabic numerals. Schob save nalashtuvannya, slid natisnut "Zastosuvati".

In order to set up an ASUS router, two ways. The first one - tse speedy by a special Maystr of a shvidkogo nalashtuvannya annex. Win special integrations from the web configurator, for non-preparation koristuvach migrate without problems, connect the router to the provider's box and pick up the wi-fi pattern. Obviously, the capabilities of the other, even the basic functions of the router, allow you to set up without problems.

Another way is a robot with a separate web interface, as it will allow you to open up the entire potential of the device, if necessary, you can use everything on the built-in basis. It is easy to look at the skin from the options for the environment.

In both cases, in order to enter the configuration interface of the Asus router, you need to enter the IP address of the attachment in the address row of the web browser. 192.168.1.1 ... When powering up the authorization, enter the login "admin" and the password "admin".

Shvidke set up the Internet on Asus routers

Having gone to the web-configurator, you will get the requested maister shvidko nalashtuvati device. Weather forecast. The first crochet will be that the password change is required, so that you can be victorious for the access rights:

Change "admin" Bazhano, schob vin buv bilsh-mensh foldable: add up to 7-8 symbols, revenge letters of the Latin alphabet, numbers and special symbols @ # $% &.

Step by step will vibrate the type of connection to the Internet:

Routeri Asus vmіut pratsyuvati in the netting of a practical Russian Internet provider - Rostelecom, Dom.ru, TTK, etc. Smut, need to be in front of technical support zzdalegid clarify what protocol will call the Vikorist operator.

Most often, it is "Automatic IP (DHCP)" and "PPPoE".
At the first vipadku, beloved, you don’t need anything else, but the axis for another - you will need to enter the login and password for the connection, as you have seen the hour before the agreement with the provider. Onslaught on "Dali".

On the offensive end of the vicon, the establishment of a mouthless hedge Wai-Fi:

Here you need to register SSIDі password for her - Bridging key... If you set up a dual-band router, then you will need to enter the name WiFi password for the 5GHz band. Embossed on the "Zastosuwati" button.

On the last little bit of the Mayr, please add the following information:

Yak nalashtuvati ASUS router for Rostelecom, TTK and Dom.ru

This instruction is relevant for ASUS RT-N10, RT-N11P, RT-N12, RT-AC51U, RT-AC52U, RT-N56U and RT-N66AU routers, as well as for all other models programmatically secure ASUSWRT (web interface in dark colors).

Schob establish a connection with the provider, go to the "Internet" section, the "Connect" tab. Viglyadaє won like this:

A large number of branches of the largest Russian providers Rostelecom, TTK and Dom.ru have the PPPoE protocol. Vibrating in the field "WAN-connection type":

Obov'yazkovo zvernit uvagu, so the bulo was set up as "So" for WAN, NAT and UPnP.

Bottom zvernit uvagu, so the bulo has been set to "So" for the items "Rewrite the IP-address of the WAN automatically" and "Connect to the DNS server automatically":

In the case of the "Localization of the regional record" distribution, you need to provide the Login and password for the connection of the ASUS router to the Internet, since you have seen before an hour the agreement has been put in place.

More parameters are not required. Onslaught on the "Zastosuvati" button that will override access to the Internet.

Dynamic IP (DHCP)

For some providers of Rostelecom and TTK, the type of connection is "Dynamic IP", if the address of the router is rejected from the DHCP server of the provider, and the other protocols are not required.
The WAN type must be vibrated to "Automatic IP" to set up.

Obov'yazkovo overturn, so the bullets will mark all the points, indicated on the little one.
Especially brutal respect for those who address DNS server so the guilt itself is automatically attached to it.

Yak nalashtuvati ASUS router for Beeline

At the edge of the Internet provider Biline Vikoristovu for connecting the L2TP protocol:

The rejection of the IP address of the DNS server will be placed in automatic mode.
In the case of the regional one, the password is entered as "I am koristuvach" (invoke the special rakhunok) that password, which was seen by the representatives of the operator.
If you don't have to enter the address of the VPN server Beeline: tp.internet.beeline.ru
The onslaught is the "Zastosuwati" button.

Nalashtuvannya Wi-Fi (Wi-Fi hedge)

In order to nalashtuvati zvichainu WiFi netting in the 2.4 GHz range on ASUS routers, you need to vibrate the item " Bezrotova hem That tab "Home":

Next to the SSID field, enter the name folded festoon Wi-Fi. In tsy yakosti it is possible to vikoristovuvati be-like the word English. Then you need to vibrate the "WPA2-Personal" authentication method and enter the password in the "Front WPA Key" field. As a rule, there is no need for more than nothing, because according to the definition of the display of the most optimal parameters.

Set up WiFi 5 GHz on ACUS routers (RT-AC51U, RT-AC52U, RT-AC55U, RT-N56U, RT-AC66AU and AC68U) 5 GHz:

And then everything is just like that, as if you want to write: "SSID" will be written down (it’s known that you will be able to use 2.4 GHz), the method of converting "WPA2-Personal" and the password on WiFi will be written, press the button "Lock".

Old web interface

Yaksho at you vikorist old firmware ASUS Vikonan routers in blue-blakytny tones (RT-G32, WL-520GC, etc.), then just go for analogue. The axis of the video-instructions, which can be known:

As you can see from the video - for the values ​​of the key parameters in new versions firmware update is not.