After cleaning the saw, the computer does not penetrate. How to clean the computer from the saw and replace the thermal paste

Vіtayu dear reader. Today, practically everything can be computers, laptops, tablets and other gadgets. Let's not push hard on your computer, with a year of wine you start to chime and what you gave, then worse. There are a lot of reasons why, but the greater part can be easily corrected. Still, the descriptions below will be for Windows so like the most prominent coristuvachs to sit on the new one.

For the cob, clean the computer, so that the wine is not galmuva, you can do it in two ways. pershy- Viklikati maistra on budinok. That’s why you’re in that mood, because you’re not convinced in your own strength, or you simply can’t do it at the same time. Other- Clean it yourself, but yourself: clean the saw, the time files, the informational note, the viruses shkidlivih programs optimize the system. This option will help you to become more involved, but you don’t need to be a programmer or a hacker, everything is simple. Ale yakcho not impressed in his power, diyah - call meist master or youma bring a computer.

It is obviously acceptable to work on a new PC or laptop, or else you have installed a new operating system. All pratsyuє shvidko, not galmuє. And after an hour, the “galma” starts, but it doesn’t suddenly open up, stupefy, sometimes freeze, or turn on, through overheating. There may be some reasons why. Naygolovnishi:

• Body zabrudnennya: saw, krihti, wool ...
• The processor is heating up
• Necessary programs clog operative memory,
• On the zhorst disk accumulated information "smіttya",
• Viruses and various shkіdlі programs rattle Windows.

What is it about work? There is nothing terrible, the description below can be repeated, whether it be, to start a PC or a laptop. For the cob, it is necessary to clean the computer from the saw. You need a vologa ganchirochka, a dry ganchirochka, cotton sticks, a pilosus, as it is possible, then the balloon is squeezed, but it’s not obov'yazkovo. And if you have a laptop, then you won’t be sawing for everything there, and it’s not necessary to physically clean it. On the right, in that the case of the laptop is built up so that it practically does not accumulate there, it’s easy to sort it out for an hour, it’s better to wind it up and not varto.

For further cleaning, we will use various programs for cleaning the operating system, so get ready before you need to install them.

Cleaning the computer like a saw.

From the accumulated saw on the internal parts of the computer, the heating of these elements begins. For some reason, stench cannot 100% defeat its functions, but bring the computer to tinkering in games, programs, and so on. This is especially true with top-end computer assemblies, the stench is even hotter and often heated. Moreover, processors often heat up, such as the central one, or the graphical one, to cause irreversible processes in the middle cores, which are not repaired by a serious breakdown.

I’ll also point out that the cause of strong heating may be hanging thermal grease. If you are a newcomer to your right, then clean the computer well, and then replace it. The thermal paste has taken off - it’s simpler than a seemingly paste, as it helps to bring heat from the processor to the radiator. I won't be between them.

And so, how to clean the computer from the saw:

Ideally, it’s better to remove all the elements and wipe it clean. Ale, it is necessary to work, as if you were inspired, that you will take everything back.

View of non-essential programs.

The next step is to clean the computer - to know that you have seen the programs that are not necessary for you and the programs. On the right, in the fact that a couple of programs are installed every hour, the stench of hanging in auto-loading and activities simply does not vikoristovuyutsya, but the operational memory is harassed.

We can see the program:

You can speed up with other programs. I recommend that you clean your computer with them, so that such programs will sound the program at 100%, cleaning the folders and registry. For example, I'm cursing.

Vaughn is bezkoshtovna, and important is not rich, I have never mentioned problems for her. It's easy to fix it, install it, and just like I described it, you see the programs. If someone else scans the computer, and if you know the folders and files, press them.

Cleaning auto-zavantazhennya.

Sometimes you can get rid of the programs, but hang in the autozawant, so you can turn on the computer at the same time. We can use them and not sting, but the stench works and fills the operational memory. Then we need:

There are also third-party programs for cleaning auto-advancement, but stink with great functionality and for quiet, smart people that need to be turned on. For example, in order to clean up the computer, the vicorist program. Vaughn is bezkoshtovna and vіdmіnno pratsyuє.

Vidalennya virus and shkіdlivih programs.

If you have an antivirus installed, run a computer scan again. Tse one of important factors how to clean your computer well. What can I say about antiviruses? Too many thoughts, too many programs. In my opinion, it is necessary to install licensed programs and purchase licenses. Some of the best ones: Kaspersky Lab, Dr.Web (doctor web), Eset Nod32 (Нід 32) and so on.

True, the deacons of them are kindly navantazhuyut the operating system, and go out, so you don’t speed up the computer, but navpacki. Then don't ruin the system with viruses and shkidlivimi programs. Here, it’s obviously the mother’s wart on the uvazi, if you have a tight computer, then it’s not a wart to be turbulent. That bazhano was supposed to be connected to the Internet, so that the antivirus was constantly upgraded.

Yes, of course, and alternatives. I am like and richly someone who loves freebies, for myself, I’ve read the indecent antivirus, to be more precise, the software package, cleansing that non-required files, time files, optimization of the operating system and rechecking for viruses. Tse 360 total security. Vaughn bezkoshtovna that is simple at vikoristanni. I on special certificate I will say that it is not bad to cope with viruses.

Perevirka or scanuvannya, as they call it, may take a long time. All fall in vіd rozіru hard drive that amount of information on the new one. Well, after that, the next step is to restart the computer.

Cleaning the computer from non-essential files and folders.

This item is more important for cleaning your computer. And what does it mean, if there is a lot of information at the head of a person? Vin starts to be stupid. So it goes with the computer. Batch all the information on the computer, index the folders and files, and if it's a mess, then you need more time, then we'll fix the computer galmuvati.

Registry cleaning.

What is a registry? Seemingly simpler, the data base of the operating system with tweaks and different parameters. A very important element of Windows. If the faults are blocked, the computer is a galmue, even all the programs, if you install them there, you can also prescribe your settings, and if it works, the parameters are changed in the registry. Zagalom, to clean the computer, it is also necessary to clean yoga.

Help us here installed program, Vaughn copes miraculously.

1. Run the program and select the "Registry" tab.
2. It’s the same here, a little bit of analysis.
3. Now it's pressing "Verpaviti". Show up vikno, like vimagaє robiti backup copy Registry, wait a minute, do not mess up.
4. Check until the end and robimo revantaging the PC.

There is another program, as it suits me, and I am constantly crusting with it. Wise Registry Clesner. It won't require installation. Who has the advantage:

• Clean the Registry, also analyze, then clean.
• Optimize Registry
• Defragment Registry

I work all three points, the program is hard.

Here it’s just like the Registry, all the files and the folders of the blame lie on their own places and shelves, and not spread all over the hard drive. This item is also important, to clean the computer normally. After that operating system, it is easier to know the files and folders, after which the system is not galmous.

Now you can take care of your rights, the whole process is albeit efficient. So it is necessary to work with disks on a computer.

Ale, how can you stand already today SSD drive, Defragmentation is not necessary, it's just stupid, so like disks - these are USB flash drives. And on the best disks there is a disk, which is rozkruchuetsya for an hour of reading files, and the head can be read by those who instructed. Well, if the files are scattered, then the big heads are rich, the disk is spinning faster, it’s going to be rich in an hour. And the USB flash drive turns off all the moments and reads the information in a practical way.

Windows operating system optimization

Here we will analyze more points for optimizing the system itself.

1. Wimknuti visual effects . right click mouse on my computer - power - additional parameters - svidkodiya - parameters. Here, it’s more obvious, marvel for yourself, try it. As the computer is rather weak, everything is included.
2. Clean planuvalnik zavdan. Go to C: Windows Tasks and everything is visible. Now, without your permission, the system will not plan anything 🙂.
3. Including system update. From practice, it rarely helps to improve the system, but if it is necessary, then fill out this paragraph. I start with the right mouse button on my computer - choose power - protect the system (in other versions operating systems, you can just call it an update of the system) - press hard on the skin disc and press on - close, press turn on and see all the points, so that they don’t take up a lot of space and OK.
4. Optimize working style. All the icons and folders on the work table support the system, so in order to clean the computer well, leave only the least necessary on the work table. But it’s better to create shortcuts on a working table.

Well, I’m guessing, it’s more important that you need to work to clean the computer. And as soon as you want to work once every two months, and then your computer lives and dihatime freely. Garny day to you.

І axis video about those how you can clean your computer, so that you don't tinker.

How to clean the computer, so as not to galmuvav. updated: May 22, 2019 by: Subotin Pavlo

Good day.

Bagato Koristuvachiv pomilkovo vvazhayut, scho to clean the computer from the saw - a task for the completion of the masters and rather do not lie there, while the computer is working as it should be. Really, there is nothing foldable in it!

That and before, regular cleaning system unit saw saw: first, make your work easier for a PC; in a different way, the computer is less noisy and annoying you; thirdly, the term is the growth of the service, which means you will not have to spend money on repairs once again.

In this article, I want to look at a simple way to clean the computer as a saw in the home minds. Before speech, often during this procedure, it is necessary to change the thermal paste (there is often no sensation, and the axis is 3-4 times - as a whole). Replacement of thermal grease - on the right is not foldable and corisna, given in the article detailed details about everything.

A couple on the cob parts of food, yakі postіyno ask me.

Why do you need to clean? On the right, in order to protect the ventilation: it is not possible to get out of the system unit hotter again in the presence of a heated radiator of the processor, and the temperature is also increased. Before that, shmatki saw should be used to coolers (fans), as they cool the processor. When the temperature rises, the computer may start to chirp (either turn on or freeze).

How often do you need to clean the computer from the saw? Do not clean the computer with fate and do not worry, otherwise look at the system unit of the skin. It is rich to deposit another type of application in some working computer. In the middle, for a sizable apartment, it is recommended to clean the PC randomly.

Also, as your PC starts to behave unstably: it flickers, freezes, starts to rattle, the processor temperature rises significantly (about the temperature: ), it is recommended to clean the saw itself in the first place.

What is needed for computer cleaning?

1. Pilosos.

Zijde be a homemade pylosos. Ideally, if the wine will be reverse - tobto. wine can be seen again. Since there is no reverse mode, then the pilosos can simply be blown up to the system unit so that it looks like it’s seen from the pilosos and drank from the PC.

2. Spins.

Ring out the simplest cross-shaped twist. Zagalom, you need only spins, which will help you to open the system block (open the live block, if necessary).

3. Alcohol.

Get ready, so you will change the thermal paste (in order to degrease the surface). I vikoristovuvav zvichaynіsіnky ethyl alcohol (given 95%).

Ethyl alcohol.

4. Thermal paste.

Thermal grease is the “intermediary” between the processor (which is very hot) and the radiator (which is cold). As a matter of fact, the thermal paste has not changed for a long time - it hangs out, cracks and transfers heat already badly. And tse means that the temperature of the processor is increased, but it is not good. Replacing the thermal grease at times helps to reduce the temperature by an order of magnitude!

What kind of thermal paste is needed?

There are dozens of marks on the market. What is the best of them - I do not know. Visibly bad, like on me, "AlSil-3":

The price is affordable (a syringe for 4-5 times will cost you about 100 rubles);

Apply it manually to the processor: it doesn't spread, it can be easily smoothed out with a big plastic card.

5. Dekіlka cotton sticks + old plastic card + penzla.

There are no more cotton sticks - pіdіyde zvichayna cotton wool. Plastic card pіdіyde be-yak: old bankіvska, vіd sim-karty, kakiys calendar and іn.

Penzlik will be needed in order to swing the drink from the radiators.

Cleaning the system unit from the saw - Pokrokovo

1) Cleaning begins with the connection of the PC system unit to the electrics, then we remove all the darts: life, keyboard, bear, speakers, etc.

Remove all darts from the system unit.

2) Another crochet is the need for a system block in the free space and take out the cover. Bіchna kryshka, which is known in the sizable system block, is evil. Crack it out with two bolts (twisted by hand), sometimes with bolts, and sometimes with nothing - you can just hit it right away.

In addition, as the bolts will be twisted, you will be left with less than a troch to squeeze onto the cover (at the back of the rear wall of the system unit) and take it out.

Fastening of the lid.

3) The filings in the photo below, the system unit has not been cleaned like a saw for a long time: on the coolers, finish the saw ball, which you need to wrap around. Before that, the cooler for such a large amount of saw begins to make a noise, which can be very prankish.

There is a large number of saws in the systemic block.

4) In principle, if the saw is not so rich - you can also turn on the saw and carefully blow the system unit: all radiators and coolers (on the processor, on the video card, on the case of the unit). In my mind, cleaning was not carried out until 3, and the radiator was clogged with a saw, that yogo had a chance to be taken. For this, sing, there is a special important (the red arrow in the photo below), pulling for which one you can remove the cooler with the radiator (it’s better, I’ll do it. Before speaking, if you know the radiator, you will need to replace the thermal paste).

How to take a cooler from a radiator.

5) After you take out the radiator and cooler, you can use the old thermal paste. In the course of time it will be necessary to see for help cotton swabs and alcohol. In the meantime, we’re in front, apparently for the help of the pilosos, he drank all the maternity pay computer.

6) The processor heatsink should also be blown out manually behind the help of the pump from different sides. I drank the flooring all the way in, if the pilosos does not take it - wave it for the help of a wonderful penzlik.

Radiator with CPU cooler.

To remove the live block, it is necessary to unscrew 4-5 fastening screws from the back side of the system block.

Fastening to the housing block.

The block of life closes, most of all, a small metal cap. Trimayut її kіlka gvintіv (my vapadka 4). It is enough to twist them and that cover can be removed.

Attachment of the cover to the block of life.

9) Now you can blow up the saws from the living block. It is necessary to pay special attention to the cooler - often accumulate on new large number saw. Before speech, drank from shovels, you can easily wave a penzlik or a cotton stick.

If the block of life is cleared from the saw - take it from the reverse order (from the order of the article) and close it from the system block.

Living block: side view.

Living block: rear view.

10) Now it's time to clean the processor from the old thermal paste. For whom you can vicorate a special cotton stick, troch soaked in alcohol. As a rule, there are less than 3-4 such cotton sticks to wipe the processor clean. Diyati, before the speech, it is necessary carefully, not strongly pushing, step by step, not hurrying, clean the surface.

Clear, to the point, it is necessary and the return beak of the radiator, which is clinging to the processor.

Old thermal paste on the processor.

Ethyl alcohol and cotton swab.

11) After the surface of the heatsink and the processor are cleaned, thermal paste can be applied to the processor. Apply її richly is not necessary: ​​on the contrary, what will be її less, tim better. Golovne, it is to blame for any unevenness on the surface of the processor and the radiator, to ensure the best heat transfer.

Thermal paste has been applied to the processor (it is also necessary to “smooth out” with a thin ball).

To smooth out the thermal paste with a thin ball, ring up the plastic card. Їy smoothly drive over the top of the processor, gently smoothing the paste with a thin ball. Until the speech, at once all the excess pasture will be taken to the edge of the card. It is necessary to smooth out the thermal paste until the entire surface of the processor is covered with a thin ball (without dimples, bumps and gaps).

Thermal paste smoothing.

The thermal paste is correctly applied, but it doesn’t “see” for itself: it’s supposed to be just gray flat.

Thermal paste is applied, you can install a radiator.

12) If you install a heatsink, don't forget to connect the cooler before you live on the motherboard. Connect yoga incorrectly, on principle, impossible (without brute force) - because. є small blot. Before speech, on the motherboard, the pink one is designated as CPU FAN.

Cooler connection.

13) The beginning of a simple procedure, more than ever, our PC became clean: no saw on coolers and radiators, the block of life was cleaned just like a saw, the thermal paste was replaced. Zavdyaki is not such a tricky procedure, the system unit is less noisy, the processor is not.

"Clean" system block.

Before speech, after cleaning, the temperature of the processor (without navantage) is higher than the room by 1-2 degrees. The noise, which appeared at the swedish cooler wrap, became smaller (especially at night it is noteworthy). Zagalom for the PC has become a pratsyuvati!

Chimalo koristuvachіv kom'yuterіv, noticing a slight decrease in productivity, open the system block and zhahayutsya visibility masi saw on the elements of the system. Dali, next self-cleaning of sawn components. With this stench, do not be ashamed to beat the saw to remove the saw. Then, let's do it, you only need to turn on the computer and continue your work at the PC, and then your digital friend will be prompted to start. - Finish up the problem.

Why is self-sufficiency different shkіdlyva?

Cleaning a PC like a saw is not so simple on the right, as it can be done at a glance. It would be better if you could be simpler than a great watcher at the computer? However, the evidence on the food chain is not so obvious. Like marveling at the system unit and its components, like at a closed box, sawing, which was on its surfaces, you can see it for help.

However, do not forget that cleaning is observed on the surfaces of a digital device that accumulates a static charge. To that tidy up, I drank from them on top not enough. It is also necessary to wipe the case with a soft ganchirochka, soaked with antistatic powder. If you reach the internal elements of the system unit on the right, then you can’t move the saw for the help of the saw. Here you need help fahіvtsya, otherwise, having shown the victory of independence, you can lead to the collapse of the system.

Preventive maintenance

Bring yoga to us at "SoftCompServis" - we'll quickly get to grips with this problem. It is necessary to remember that the presence of non-acceptable substances is a part of the whole complex of visits for preventive maintenance.

• Cleaning the system unit from a saw and wood.
• Cleaning of contacts that have oxidized.
• Visibility of static charge from the components of the computer and from the surface of the system unit.
• Monitor maintenance.

Only a small part of the work, yakі vykonuyut fahivtsі our center for the need for prevention. At the same time, it is necessary to clean the internal components not with a pilosom, but for additional sprays in a squeezed air. Our facsimiles may know how to clean up an excess of static charge from the components of the computer, so that the substance does not become the cause of the failure of the PC parts.

A great problem for a robotic computer is contacts that are corroded. The stench also induces prevention, otherwise it will not be a problem to become the reason for the exit of rich elements from the fret. It is necessary to remember that winding a light dot with your hand to the contact on the motherboard can cause oxidation of the contact through the water that has accumulated on the hands.

Overheating problems

Periodic cleaning of the system in the event of damage that accumulates, allows not only increasing the productivity of the computer. Tsya and іnshі preventive procedures allow to solve problems from overheating of the system and її details. Nadmirne heating is the reason for the old age of details and the exit of them out of tune.

The skin microcomputer is created from the rozrahunka of the robot at room temperature. As a result, the temperature rises to 29.5 degrees, causing a threat of overheating. Such a problem itself is blamed in the minds of the promoted vologosity. In order to safely solve this problem, the koristuvach is guilty of turning off the unbalance of his digital favorite.

Timely cleaning of the saw and other types of prevention, which are carried out by the specialist center "SoftCompService" - a guarantee of the correct functioning of the computer. The computer does not work after cleaning the saw - this phrase will be turned off again, as you turn to our masters for your help.

All of a sudden, for the rest of the day, before me, I’m faced with the problem of an offensive nature: "after cleaning the computer does not enter" To be more precise, then the wine stops starting - the system unit itself turns on, the cooler works, but the signal to the monitor does not go. The cause in both vipadkas appeared to be the same.

The axis looks like this AMD processor:

One more angle:

Like a bachite, the processor's backlight is with contacts at the look of "wusikiv" or "low".

In both vipads, the koristuvach independently carried out cleaning from the saw and removed the radiator from the mother's board. When tsiomu processor through the old thermal paste. stuck to the radiator of the cooling system.

A picture appeared:

For this guy, obov'yazkovo is necessary water the processor from the radiator. As you already guessed, the stench did not rob him, but tried to put them back.

It’s important to be safe, because I can't see if the processor is correctly inserted into the socket of the motherboard. (Also, there are more than a thousand contacts on the processor, a couple of them all have a meal).

If it’s not easy, then you can push harder. In a higher mood, if the coristuvach is especially active, go like this:

The reason, through the yaku computer ceasing vmikatisya - pom'yati nizhki processor.

I was spared, because bent legs were not rich (type 5 to 15). Gently straightening his neck, inserting the processor at the socket, after which the computer was restarted.

Znavtsі to please water the processor that stuck to the radiator. for additional alcohol. The type of thermal paste has dried up and spreads and spreads easily. I robbed myself with a vikrutka, vikoristovuyuchi її like an important (hello Archimedes!). Still, the processor is hard to finish and it’s hard to break it.

Conduct your computer carefully, and rather entrust to someone who understands better for you.

If your laptop doesn’t start after cleaning, then persh for all raja twist RAM sticks ( operational memory). As a rule, all tsim i obezhuєtsya. If there is no change, then we didn’t get it right. Reverse more respectfully