Cracking the screen on the touchscreen phone - how can it be robbed? When you clean up the troughs from the phone screen, you can memorize the troughs on the display.

It is a pity, on the road, the motorist does not have insurance for other things, but there are some troubles. Navigate with even more accurate keruvannas, from the start of a smart car, you can choose the stone and the front of your car. Do you have such a situation in front of the master of the power supply machine, how can you put a trash on the frontal slope? Go to a car service or try to solve the problem on your own? It’s a year old, as if you could put a thrill on your frontal slope with your own hands and not overpay for expensive repairs, but, altogether, obviously, I wouldn’t get stuck and didn’t get stuck in a trap, as if you would.

Tipi poshkojen

It is necessary to clarify at once, which mechanical processes can be used independently. Up to such types, we can include:

• Chip. Oh, you need to get it right, you didn't get it.
• Forgive me, they have settled into a period of rapid and steady temperature drops. It can happen if the car is not properly programmed and the temperature conditions are not kept up to the middle of the cabin and the call.
• Chipped. The reason they appear is mechanical action.
• Rose galleries. On the vidminu of simple tricycles, such ears are seen to finish smoothly. Some unreasonable renewal of the problem can be caused not only before the appearance of large, reddened grooves, but more and more replacement of the frontal slope.

Important! Be-yake mechanical engineering you can make the slope all over again, if you don't see it right away.

Yak bureaucrats to produce before the appearance of tremors?

Automobile sklo can be treated with a mechanical drive after a blow third-party subject... However, there may be some errors on the ground for some reason. Axis lishe deyaki any reason ushkojennya:

• Rіzke colivannya temperatures. There are one of the main reasons. As soon as you warm up the slope, you will have a chilled drink, and navpaki, when you feed a hot stream of water, there can be a trail on the cold slope. Most of the time it’s going to be at the place where the sklooder goes.
• It’s inappropriate. The grossly degraded technology of the production can lead to a waste of time, as I simply will not showcase the great news.
• Seryozna deformation of the body of the transport vehicle. And here the tricky part is established not all at once, but in deed.
• Nepomіchenі chipping, scho to produce to ruinuvannya slope.

Yak uniqueness problems?

Infection on the market іsnіt ізні propositions for the seizure of the frontal slope. One of the most popular options is a decal sticker, which protects the road as a part of a car from mechanical injections.

Krym tsyogo, the most avtoclassman should see the offensive rules for operating the car:

• Control the front and rear slope of the foot. Do not straighten cold weather on a hot slope.
• Please replace the details only with the correct version.
• Check your vehicle regularly for any chips or defects. If you have developed a special sealant, you should securely fix it for the additional special sealant, so that you can get rid of it.

Important! As soon as the stone was "spiteful" in the road, then, for everything, it is necessary to get the saw that hit the road. Seal the mischief with scotch tape for all the time. It’s not out of place to steal the trash from a deformation, but to fix the final cleanup on the ground. In the first place - a brood, which is scanty at the bottom of the skeleton, if you can see all the middle of the warehouse for repairs.

How can you take the thrash on the frontal slope?

At the price of food, it’s unambiguous - it’s not out of the question, but it’s necessary. Bagato vodіїv doesn’t keep up with the problem and go out because of the slope. For such a trip, I find out some of the problems:

• To skim the sight on the road.
• Tricity of vibes on the sun, free water.
• Decrease the level of safety of the water.
• Nadmіrnі navantazhennya that vise nadayut ruynіvny injection on the trough. First, you can lead to serious inheritance of those problems, which can lead to the loss of the knowledge of the Mystery.

Do not bring the right to an expensive repair, or replace the details, get familiar with the process of repair and clean up the trash on the slope independently, quickly. Tim is bigger, that the professional services of the greatest car services are not insured on the single problem.

Chim put the trash on the slope?

The essence of the repair is that you store it with a special photopolymer warehouse, stretching it out. Adhesive visonuvatime two functions:

• Z'єє
• It is practically invisible to break up the crumbling, because the function of breaking the slope is approximately the same as the efficiency of breaking the rock.

Otzhe, for self-repair so much, you need to know these materials and possessions:

• Photopolymer glue. For special features for automobile and other skid. The hardened polymer is used for the preparation of direct ultraviolet. Hour of hardening: 15 chilins with a vicious UV lamp, 45 chilines - with a natural visceration.
• Ultraviolet lamp.
• Plastic (disposable) or metal (bagatorazium) injector for glue.
• Applіcatori, scho allow you to lock the injector on the sklі.
• Electric drill with diamond drill. You can also take an internal stress at the place where there is a possibility of further deformation.
• Vacuum pump. The tool is necessary to see if you are from the trough.
• The mirror is visible between the defect.
• Scrubber for cleaning the surface.
• Cleansing ridina and servetka for a vivid vologue and brood.
• Alcohol (medicinal chi isopropyl) for grease repair.

Important! You can substitute a drill for a dental drill, which is sold at "Medtekhnіtsі". Vikoristovyte yogo carefully, so as not to harden the slope.

Having completed the required set of tools and materials, proceed to the repair, using the advance instructions.

Pokrokova instructions for the repair of troughs on the slopes:

• Really clean the slope of the trail from the brude. Pick up for the whole oil degreaser and pump. You will see all the road saws and bruises from the post-production, you will need to repair the entire area. In addition, as soon as preparatory work has been carried out, come in, lay down the quality of the repair process.
• Loosen up the slope. It’s necessary to build up in order that the scale of operation didn’t increase at the later visits. Carry out the qiu procedure for the help of the drill with the following rank:
  1. At the end of 2 mm from the trench, drill a small hole at the back of the extended version.
  2. To bring the trishty to the opening of small onslaught. As a result, there is a tricky part going to the perforated hole and not far.
• Clean up the edges of that area using a scriber.
• Prepared dilyanka to be treated with servetki, snaked at special ridin for cleansing. You can clean the surface with alcohol.
• Give the shredded delay an hour to dry out.
• Prepare the polymeric glue according to the instructions.
• Install the injection support (mіst). So the place was hopefully fixed on the slope, to replace the sucker with vaseline and to stand in such a rank, so that she roztashovy without priority over the pockets.
• Prepare the injector before the test. For Tsiogo:
  1. Take the oil seal.
  2. Lower the piston.
  3. Put a dangle of glue into the injector.
  4. Push the glue with the piston to the upper edge of the cylinder.
  5. Install the injector from the glues to the location behind the auxiliary applicator. Slidkuyte, the center of the injector is being built from the center of the truss.
• Add the piston and vitrify 1.5 glue, and the glue will increase the amount of glue.
• Pislya zapovnenya all tricycle of mites, pumping zupinit. Know the injector and the place.
• Install a 15-quill lamp over the UV trough.
• When hanging with glue, I saw the surplus from the fold behind the auxiliary blade for the assembly knife.
• Polish the repaired surface with soft servet and polishing paste.

The repair is over. For seeing all the endings of the visits, the trinity will become invisible.

• Vikoristovuvati for the introduction of photopolymer glue can be special dial... Yogo vipuskayut bagato virobnikiv. The set is stored with glue and additional accessories. Buy kosti, give the rewagon all the names of the brands - Done Deal, Permatex, Abro.
• Facilitate the process of pumping glue in the best possible way from the interior of the car, if necessary, by means of a portable lamp.
• For polymerization with glue, it is convenient to use a UV lamp for a home victorian. If you have such an attachment, speed it up. It is possible to finish rolling again with glue and natural way. The ale tsei process can be drunk up to 10 years.
• In addition, when you see an injector for glue and an applicator, apply a fine finish to the hole, then close it with a flat ball on the surface of the slope. Lay the plavka towards the center to the edges, so that the bulbs did not endure by it. Use a flat object to flatten the water. You can see the float when hanging with glue behind an additional plastic scraper or a wood plate.

The performance of a tablet computer is beyond all control, or a cool smartphone has a field in a touch screen - it's just really easy to use it. Alle tsatmaryutsya nongovernmental tremors on yogo surfaces. It is possible to get the message, if just by buying a sticker on the attachment for a special fish for the hijacker, the protest will be greatly appreciated by the sensitivity of the touch screen. Varto razglyanuti razglyanuti, how to have fun on the screen of the phone, tablet, or whatever the touchscreen attachment.

Professionals

To graze those lines, the doors are specially for the visual display of the glass surfaces, to pass aggressive components at their warehouse, which will help to achieve the desired result, do not play the device itself.

Most often a special servette is required for a vikorystannya for a professional level, as it is easier to apply a warehouse. In order to attach it to the kit with the preparation. With the help of shops, you can get a good look and feel for an iPhone, and be it an add-on.

GOI paste

The vibration polishing of the display is based on the amount of space and the intensity of the display. Deyakі people, hoping to know the way, as if they put some money on the phone, immediately guess the GOI paste. In their role, the abrasive is introduced to a special powder based on chromium oxide, and the paste is made of decalcous type. For visualization of cleaning from the sensor of a smartphone, go for the option, which is the smallest abrasive injection. Before the time, when you carry out the obrobka, it is necessary to clean the sides of the attachment behind the additional scotch tape, so that the warehouse does not penetrate into the openings of the slabs. Pasta can be used in other forms, which should be started using the Vikoristanny method:

Displex paste

Tsey zasib є more effective and happy. Displex paste is specially formulated for sensor screens.

Get out at the sight of small tubes, like manually applying sums to the surface of the sharpened nose.

To get rid of the pork, to make the light and to finish the beef of the fabric. The color is important, so when the fabric is polished, it will be visibly darkened, so that you can control the result.

Having finished the procedure, I will stain the surface with a cloth and turn it over.

For an additional method, it is possible to clean the chamber of the built-in camera, to take the most accurate photographs.

Part of special warehouses

For the obviousness of the podryapin on the mobile gadget, the corystuvachi make no respect only for the effectiveness of the drug, but for the price. Prikhovati defect and paint zovnishniy viglyad a beloved annex can be found at an affordable price. For example, GOI paste can be bought for 70 rubles for a 45-gram memory. Tsyogo obsyagu maє vistachiti nadovgo. The foreign warehouse is kostu trokhi dearche - for a price of 200-400 rubles, you add a small tube of 4-6 grams. Special drugs can be found in the Internet, or, in front of you, you can find information about them and delivery.

People zasobi

Thinking about those who like to have fun with phone calls at home, next to the price of money. Vlasniki of mobile outbuildings, as they violated the polish on them, often stuck with the lack of efficiency of the home work, to be victorious.

Polishing the body of the sensory base is rewound by using different methods, for example, by breaking the madness from the driver and the childish adhesion. The effect of such tricks is to be found in the straight line of defect.

Before Tim , how to clean up the thrash from the screen telephone folk zasob, the device is required to read:

1. Get the gadget.
2. Seal all the openings and open them with roses with an insulating tape, or with a backing tape. The stench does not allow that water to penetrate all the way.
3. Gather patience, so that deyaki defects will be even more important to see. For everyone, it’s not a good idea to wind up, but the time of retreat.

Toothpaste

You can see what is available for help, you can use the following algorithm:

Kharchova soda

At home there are especially primitive methods, about how from the very childhood. For example, visvitlity of dishes is possible for an additional extravagant grub soda.

Pokrokove Kerіvnitstvo:

Automotive polishing

Get in touch with the dirty stains to help you with the preparations intended for the cleaning of motor vehicles. For example, autopolyrol will allow you to effectively fit in with your customers.

At the same time, the maximum safety is achieved, the fragments of the composition are not suitable for mobile displays.

Available and special polyols, designed for mobile screens.

Roslynna olia

Immediately it is necessary to say that the oily structure is not in order to prevent serious defects, but you can just paint your phone or tablet computer.

The order of the offensive:

All the ways, about such bulo, it is said vishche, є with out-of-the-box accessibility, and allow for quick and clear support for mobile attachments from other podryapins.

Uvaga, only SOGODNI!

As far as your gadgets are concerned, there is a nem zakhisny slope; Do not be confused, we picked up a few life hacks about those who clean up the phone or tablet from the screen. For tsiogo є bagato effective tools Among them, both simple and out-of-the-box, as well as technologically foldable.

The main ways to visualize podryapin

Flasks and plastic displays are strong before polishing (like polishing the screen for additional specific methods, which are easy to see). The same can be said about the storage of the cameras of mobile devices.

Vibir in the way of polishing the screen or the chamber to lay down on the step of the glibin podryapin and їkh zagalnoї kіlkostі.

Cleverly, the methods that allow you to see the mess on the phone can be divided into 2 groups:

1 Хімічні... With a lot of dodatkovo it is possible to classify:

On the other hand, you can transfer the results of out-of-the-box handheld cards, which are practical for a skin householder:

• tooth mouth;
• sodi;
• rose oil.

First, you can transfer the bunny of special (albeit water-hour) chemical reagents and other chemical reagents, but also:

• childish stickiness (talcum powder);
• mouth GOI and її analogs (for example, Displex);
• car polishes;
• calcium sulfate.

2 Mechanics... The stench peredbachayut zasosuvannya:

• emery paper;
• Drill Chi Shlifuvalnoy Machine.

Vivchimo report, like pick up the mess from the camera on the phone, or from the screen of the mobile annex for the help of the indicated methods.

Uwaga! You yourself accept the decision for your fear that risik, vicoristovuvati chi ni, described in the statty method. We can’t bear the information for any kind of outbuildings, but there are more ways to clean up the displays and cameras of mobile outbuildings.

Updating the screen by hand

Arrive some other things on the camera phone, or the display of the gadget can be found by the available means in the home mind. Transmit, so you can use the smallest inflow on the surface (it is effective to see it - not big and little podryapiny).

Go to about storing:

• tooth mouth;
• sodi;
• rose oil.

Zastosovuєmo toothpaste

A small amount needs to be applied to the display. zhisne sklo ob'єktiv camera behind the aid of a cotton pad. We'll use it in circular rucks (as if it were sprinkled on a large area), or with ruffs back and forth with light onslaught, it would be necessary to break the display, “good things” were needed.

The most beautiful paste is vikoristovuvati classic mint.

Fig. 1. Clean device with paste.

Vikoristovu kharchov soda

Yakshcho toothpaste doesn’t help, you can quickly use it with soda. The technology for cleaning the screen of the tablet or the smartphone will be the same here, but replace the cotton pad є sense the foam rubber sponge or the mother.

Important! Soda in front of zasosuvannyam needs a troch of living. The dry powder can be shrunk to the screen of the smartphone;

Small. 2. "Sodovy" effect.

It’s overwhelming because it’s pouring into the surface of the screen, it’s cheap, but not pasta, and that allows you to clean up the mess from the screen.

Zastosovuєmo oliyu

Another one, like є it’s practical to start by hand the booth - zvychayna oliya. It is not very abrasive, like a paste of pure soda, but it doesn’t make any more effective sounding of other pads on the display.

It is necessary to put on the screen of the mobile phone literally a dribble of the product, and then rub it on the display with light rubbing.

Important! Naygolovn_she do not overflow the oil - if you can drain the middle of the device, it will be easy to change it.

Khozmag help

It was not possible to see the podryapins behind the help of the clever eyes of the hand - it is possible, to see the state store for the occasion of the onset of chemistry:

• childish sticking or talcum powder;
• graze GOI chi її analogs;
• car polishing;
• calcium aluminum sulfate.

Zastosovuєmo child sticky or talc

In the midst of koristuvachіv mobile gadgets є a dumka, but a child who is sticky - cheap and cheerful, protest, the efficiency and effectiveness of storing is adopted by practice. The main peculiarity of the sticking is that, when you transfer it, it is possible to polish, from one side, to finish the hard one (the sticky sticks to remove the hard particles), and from the same - it is possible to avoid the appearance of the supportive ones, the other ...

Vikoristannya mouth GOI abo Displex

The prices must be adhered to specials. The stench, however, is good to polish the skin that plastic. At the same time, shove the cleaning from the camera of the smartphone, stick more effectively with the GOI paste itself, and for cleaning the display - Displex.

Small. 3. Displex - optimal for touchscreens.

Stagnation of car polishes

Similar to GOI paste and Displex behind the injection of mats - car polish. Among the popular brands of such devices, which can be used for cleaning displays in the form of podryapin - Turtle Wax, 3M Scratch Removal. Automotive polish can be applied to the smallest visible stains from the displays.

Mechanism of zasosuvannya zasosuvannyh vissobіv - mouth GOI, Displex, polyrole, the same. Apply a small amount to the flesh of the fabric, then polish the surface.

Significantly, the storage of significant polirols can be used to add additional specialty virobes - for example, car serviettes.

Vikoristannya sulphate aluminum-calium and egg white

From the exotic "chemistry" ways of seeing podryapins from screens, such as vikoristovuyu entuzyasti in mobile electronics, you can see the stagnation of sums due to the meaning of words.

Small. 4. The head is not a "squasity" screen.

Calcium aluminum sulphate (also called "alumina galun") is an inorganic speech, which can be used in the small industry as a tanning word, in the textile industry, in the cosmetic industry. You can buy it in chemical reagent stores, including online stores (for example, https://lenreactiv-shop.ru).

Take 1 egg bottle and 1 teaspoon of calcium aluminum sulfate. To save money from small containers, pour it into an aluminum cup (tarilka) and rose to 65 degrees. Then it’s necessary to soak the microfiber shmat, and then dry it in the oven, and it will rise to 150 degrees (using aluminum foil).

Let it cool the microfiber, lowering the water, let it dry for 2 days at room temperature.

This procedure must be repeated three times. For the help, the shmatka is crumbled for the help of the meanings of the chemical words of the fabric and the rosette to the surface of the mobile device. Take away other garbage and stuff.

It’s a way to look at it - at the moment it’s necessary to provide additional chemistry.

Vivchimo now, as if you put the podryapini from the tablet or a device similar to the characteristics of the additional mechanical methods.

Mechanic zasobi

In the case of neglected vipads - due to the obviousness of gross plots, because the phone is not far away from clearing out the chips on the screen, it’s worthwhile to see the importance of artillery in the case of mechanical methods of seeing the camera out of the display (meaningfully for unintentionally clearing the screen). Go to about storing:

• emery paper;
• drills, sling machines.

Vidalyaє mop up for the help of emery paper

Meta її zasosuvannya - in step-by-step erasing of the surface to the glibini, which leads to the glibin of the podryapini. Yak result - the podryapin simply cease іsnuvati.

Іnshe pitannya, chi bude screen, Primary chipping with an emery paper, viglyadatime is aesthetically pleasing. Zrozumilo, yakshcho, for example, podryapaniy iPhone - tidy up the parsley in an analytical way is not easy. It is even necessary to bring an old gadget into the big mensh "commodity viglyad" - a method to become familiar.

Small. 4. Is the method firm, ale fair?

Zastosovuєmo drill (with a roller), a shlіfuvalnu machine (with special attachments)

The main function of such devices is the capacity of bagatorazuyut the effect of the storage of "chemical" tools, looking for additional automation of polishing. I didn’t find anything at the koristuvach, after I tried the polishing, I didn’t know anything, but I don’t know - I have no sense of touching all the additional annexes.

Prytsyuchi on hundreds of wraps for khiliina, dril or shlifuvalnaya machine is created to preserve an irreproachable result from a manual method.

Pidvedemo pidsbag

In such a rank, є great number Ways to "renovate" the screen of a mobile device from subryapin. I will try to visualize the main features of the list in small tables.

Otzhe, mi vivchili, yak fumble the podryapin on the phone screen. Yak the most simple but simple speeches - olia, soda, little child, so and more folding vidi By-stream chemistry and reagents (like a speech on the basis of calium sulfate), can be effectively stuck for visualization like from displays, as well as from the storage compartment of cameras on mobile gadgets.

At the same time, it is necessary to remember that prophylaxis is always more beautiful for "lіkuvannya". Per mobile attachment needs to be looked at. It is necessary to ensure that you are still using the device separately. So, the garnishing chokhol is to seize the case, and a special storage unit will help to preserve the display without baking.

If I’m a little dirty, the ice showed itself, it was inaccurately vivoditi. Those who cleaned up the phone on the phone screen made a report - for all they can get stuck in the available space.