How old is it when you start using your smartphone. Yak znyaty zhisne sklo on the phone screen

There are two taboris: one can do it, but do not mind the slope of the display, and, as you might have already guessed, you can see the prototype dummy. All the sides are taken into account in the ts_y statty.
at power supply"Display replacement" you will melodiously be proponated options for replacing the layout, the part of this procedure is lower, the module is replaced with a single module, so your original matrix will be lost. I think that they put their cheap copies of displays to know that when the colore was transferred, I’ll look around, so they say, there may be problems in the robotic touchscreen.

It's that simple! I am amazed at the video on YouTube and I remember myself

I will help you to embarrass you, without the manifestation of a special possession of the price it is unwise. For some reason, there are two technologies for "gluing" a new warehouse:
Persha - for the help of ultraviolet glue.

cheapness
+ Prikhovuє micro-sap on polarizers

Appearing zhovtikh to the beaches
-No need for communication
+ Special transmissions to color
- not confusing with 3D Touch

Danium glue is importantly uniformly distributed over all the surface of the matrix (at the end, squeaky, uncomfortable), even after a ten hour in a little overshoot (increase the vice), the glue will be glue, but it’s already unacceptable. Oskіlki tse glue, then it’s wrong to eat it (behind the blame of amoledov), it’s a lot of things that can’t be seen, because you know it’s before the procedure, but you can, in the case of an iPhone, I’m not talking about a problem Sony, Meizu, then the price is easy. If you were reminded of a message, then you may not have been able to use the SF for glue and did not catch it. Є the greatness of ymovirn_st, but with active (or not even worse) hands on the phone, podsv_chuvannya know the hall of the cleans.

Friend, bilsh modern technology, Vikoristannya wasp-plivki

plus:
+ Possibility of being victorious on any phone model
+ Delivery time
+ Not zhovtіє
+ Rivnomirne play all over the area

- ustatkuvannya road

Rizik can be brought up to the outlying minuses before the hour of nobility, as the master of advices, the risik can be made up to the minimum, but still not to zero. Our service center has 95% success in these procedures, and even has a very high indicator.

Is it original?

Original - tse those, as you have established a handful of copies, and the stench is already good quality (which seems to be "original") and nasty quality (shops that love to name copy A, lower "A" are more "cool"). As soon as you ask for the original, ask for a certificate from the virobnik's plant, if it’s not good (it’s not), then it’s just empty words. So I think so ti skla yaki mi minyaumo in service center as close as possible to the originality, but to name it with the word if it is not fair to the customer. We are happy to admit to the service centers, they call everything that they have to lie in the warehouse, an original and, of course, people go, and there is an “original”.

Why is it so dear? I know the words of kostuє sclo!

So, really, the price of the skla itself (touchscreen) is not the key to the endurance. For an hour, changing the display of a loan in the middle 20-40 minutes in the fallow specific modelsі the majstr's tool. The replacement of the warehouse takes two or three times over for an hour. It is also necessary to have an adequate knowledge, and there is not a large number of majors in volodya's technology in ideals.
To replace the slope, special possession is required, the total rate of which is close to megapc.

How fast can you remember a module at once?

You will see the module you will remember. At the same time, the display on the iPhone 6s will cost 140 $, at that hour the price will be 60 $. Let's walk through the Chinese, Meizu Pro 6 - $ 155 to replace the display module, and $ 55 will cost you to replace the storage and such applications without latch on Xiaomi, Samsung, OnePlus, etc. We borrowed a storehouse on bagatokh models. At the same time, they did not stick around with those Chinese display modules, colors, kutiv inspecting and their characteristics.

And I’m not going to see?

From the hour of the display's knowledge from the frame, looking at the separator, gluing it with the press and in the pressure chamber on the matrix of the fit, there is a lot of voltage. Every client is about all the toughs, the tough ones from the slope, yes, the sparing capacity is 95%. In 5% of cases, it is necessary to replace the display module entirely.

Coming in the article, I plan to assign technological steps to replace the warehouse in my service center, croc by croc. Write in the comments, what is the topic, would you like to read the article about the repair of telephones? Would you like to know more about development, new possessions, ways to get clients?

When replacing a warehouse on a smartphone, it is not enough not to worry about adjusting the rules and setting them up with hand-held tools. Yak pidsumok: on the phone, it’s messy, it’s naughty, it’s naughty, it’s plump, or it’s just unscrupulous to trim

When replacing a warehouse on a smartphone, it is not enough not to worry about adjusting the rules and setting them up with hand-held tools.

Yak pidsumok: on the phone, it’s a mess, it’s a mess, it’s a mess, it’s a little plump, or it’s just not mentally easy to trim.

Instructions: how to set up your phone on your phone

We prepared a short instruction book for those who want to stand up independently.

The statute has the basic information, but it is recommended to take a look at the video for the picture. report description installation steps.

Vidalyaєmo old sklo: about scho it is important to pam'yatati

Require size, sklo adhered to the screen not through a special adhesive coating. The grip of the float on the smooth surface of the touchscreen is seen on the static slide. Trying to do it, having p_dchepivi nigtem abo (kudi girshe) with a knife, end up popping the screen and the body of the phone.

You can add a special suction cup to the list of unacceptable inheritances. Remember, show all the steps smoothly. Pressing firmly on the Velcro, release the loop or close the screen module. Between the slope and the float, a vacuum is established, which will protrude from the surface. If you screw like a sucker, it is good to stick together with a puddle, there is a good chance that the sensor will be turned off if you can see the slope. Do this last and carefully.

Scho pidgotuvati for the installation of a storage warehouse:

medіator (or a thin plastic card) - take 2 pieces more beautifully;

a suction cup with a silikon (even if it is already reinstalled, you can do without Velcro);

servetka abo a piece of lint-free fabric;

skloochisnik with alcohol (also pure alcohol or perfume);

medical gloves (silikonov or gumov).

If you get used to the cimi with tools, the robot will be borrowed no more than twofolds.

Short description of the process

First, start down to the robot, get over it, but there is no saw of any villi on your hands. It is not a matter of touching the found particles on your fingers, so play it safe and put on medical gloves. The stench is thin and smartly kick on the hands, so you don't get caught in the robot.

Let us put the suction cups on, we will put the phone on the phone with a slope, less splinters and tremors. Closely apply the Velcro to the bottom of the screen, and then press it down and glue it to the crease. Take the mediator and pull the suction cups on yourself, only step by step increase the strength, and you will be able to see the screen at once.

As soon as you see, when you are inclined to see, play the mediator.

If the slope is about 80% wider around the perimeter, grab the suction cup and lift the old screen.

Kleimo nove sklo

First, apply new pokrittya, saw saws and finger beats. For the whole run, a lint-free servet: a handful of screenshots from the warehouse and clean the surface for additional prepared ganchrochka.

Vіzmit zhisne sklo by the edges (put on the gloves in front of the front).

Carefully mark the glue on the surface of the pad (trim the edge of the phone, as long as you carry the paddle - you will glue the drunk).

The slope is as close as possible to the screen (line the center, turn it over, all the openings for buttons, roses and cameras passed through the float).

As often as possible, lower the file onto the screen, press down and smoothly smooth out the window towards the center to the edge of the window. Pick a dry, lint-free servet or a thin plastic card for the first time.

Know the water applied for capture during transportation.

Do not expect to stick the chip on the phone without hitting the saw and fluff. Well, they kicked it off, and went on to drink some smiths, stick it right up to the minute, de brude.

It is also possible to use a compressor, a technical pilosos or a spray bottle to squeeze them, if you see them.

As soon as there is nothing so dumb, use your hand to speed up with a pincer.

Yak only seen the brood - glue the slope back.

P.S. And remember, all you have to do is change your testimony - all at once the light! © econe

It’s early in the morning, the term of the service of the logistic warehouse on the iPhone 6 will end with the appearance of tremors in the fall, for example, the verdicts on the end faces. The use of a smartphone with bulletproof glass of a similar quality can end in disrepair, as for the display of a gadget, or by the size of the fingers.

If you want to unicuti your inheritance when you see it, if you see it, it’s for you to remember that it’s on your iPhone 6 bolsh short quality... For example, one of the most popular and mint - sapphire seria, s let's talk about it display and rounded edges.

Quick dismantling of the storage warehouse on the butt of Apple iPhone 6

Persh nіzh remember bulletproof glass sklo, it is necessary to know. It's easy to get rid of it. We know all 2 plastic cards (bank, discount, etc.).

Carefully and along the edge of the slope, from one side, from the other side. In order to fix the prodigies, put plastic cards, as shown in the photo.

It's fun. To make the most of it, try to be victorious in fine, ale motsnі objects. For a good deal of plasticity, the line is not too big on the fingers.

In addition, as plastic cards are inserted into the slot, carefully place them in the bottom part of the iPhone 6. Good luck.

Uwaga! When you set up tremors on the slope, micro fragments can appear, as the screen of your smartphone will be ragged from the side of the throat. The very fact, the process of creating a warehouse should be carried out accurately and without any pressure.

It’s easy to buy with an iPhone 6 and it’s not important for a newbie. Yaksho Vzhe have already picked up or bought a loan on Apple iPhone 6, please follow our instructions on how to do it.

The main function of the zhysnogo warehouse is to save the phone against a blow, tremor and podryapin. Tsei element take care of everything. Years old winn’t worthy zovnishniy viglyad... Through the price of lowering the price, I will add it to the attachment. To replace it, you need to learn from your iPhone. Qia procedure is awkward. Just follow the rules enough.

Need a replacement?

Persh nіzh іsnayomitiysya, yak znyati z "iPhone 6" і 5, it is necessary to know the reasons for replacing:

• Psuєshnіy viglyad call.
• I will get lost in the attached functions.
• I would like to remember the new sklo.

If you are on the phone with a new sign, pristine the viglyada carefully. For iPhone є special accessories, it is ideal to go for size. Alternatively, it can be victorious and universal, as it is necessary to correctly stick it on.

Safety rules

It is necessary to vrahuvati one important nuance in front of the tim, as to know the slope of the "iPhone 5" or 6. The surface of the screen is ideally smooth, the slope is fixed to a new one. Yogo trim is not just glue, but also electrostatic force. Two surfaces need to stick together, and it’s not so easy to know. Yogo requirements for feeding nigtem. As soon as possible for cich tsіlei with an object, for example, with a knife, then є display.

One here may not be helpful. It’s hoped to stick to the surface, before the vacuum, with the power of won’t come. If there is no problem, the sucker doesn’t grow, but it doesn’t show up.

The sensor is attached to the case with a double-sided line or glue. It’s less of a touch in touchscreen and slope. If you put the force on, then you can shut down the entire screen module, through it, you can loop through the loop. We should be careful about this. You can only use the instructions, as you can see it from the iPhone 5s or I will add it to the view.

preparation

The robot needs a visonuvati neatly. Before you know what to do with your iPhone, you need to prepare everything for the procedure:

• Mediator.
• Suction cup for silikonov.
• Lint-free servet.
• Skloocisnik.
• Medical gloves.

Deyaki sets of glasses include everything necessary for the procedure. Since there are details є, the robot is easy to carry out.

special features for dismantling

Yak zhismati zhisne sklo from the iPhone, so everything went neatly. Before the procedure, you need to wrinkle your hands and dry them nicely. You can hurry up with gum mittens. The price is necessary for the recovery of every bit rate and separation. The screen will be watched carefully.

On a weekly basis, you need to see a cilia cut, de vidsutnі vіdkoly and іnshі ear. At the new demand, get your hair covered with a suction cup, pressing it down to the annex. Coot with a suction cup for feeding for the help of a mediator, scapula, scoop, dropping through the slope. For the whole it is necessary to pull the suction cups in their direction.

The procedure for requiring a visonuvati is accurate; When the suction cup is open, you can smoothly insert the mediator into the new gap. When you see the need, use the mediator. There are two tools for the great screen of the demand. In the beginning, you need to take the suckers on yourself, and you need to put the suckers on you.

New building sticker

If you can see the procedure, as you know from the iPhone, you can easily check the procedure. Then, for a song, it will be necessary to glue a new element. As a result, the result will be clear, the robot will follow the clean room. Before gluing on the need, apply a cleanser and grind the surface. Price is required for general usunenia saw and grease-free surfaces.

The cry of the brothers for the edges. Hands should be wrinkled and dried. You can pratsyuvati in medical mittens. Then it is necessary to pull on the label of the glue, as it is on the sticky surface, and put it down. Slow trims closer to the smartphone, and during the process of robots no peels sticking.

The slope differs from the sensor, which needs to be centered and verifiable. Need quilts, just open everything. Virib demand put down on the display, trochi press down on it. Bulbashki require usuvati immediately, wiping the surface with dry servetka. In the beginning of the day, the yak served as a cruiser for an hour to be transported.

More beautifully, put the powders right away, so they didn’t eat them. It is necessary to accurately display the problem, having seen the smitty. For tsogo you can vikoristovuvati servetka or tweezers. Then it’s easy to put on the place. When we send a phone number, we will be stolen from the phone. The procedure of notifying and gluing the slope for all iPhones is the same. It is necessary to remove the vibration from the accessory.

The main function of the store of any gadget - zahist touchscreen mobile annex from the post. Take a blow on yourself, you tend to break loose, break up, break up with chips. The yakity will be lost at the same time, the look around the display is getting girder, the gadget is consuming a presentable call. Persh nіzh vstanoviti nova zhisne sklo, it is necessary to know how old it is. At the statti we will talk about those who know how to use the phone.

Yaki zapobizhni come in, need to get ready?

Before tim, how to remember zashisne sklo from an iPhone, it is necessary to vrahuvati, scho the surface touch screen the gadget is practically ideally smooth. Tom will be able to stick to the ground. Most often it is necessary to trim for the rakhunok of electric forces, inodi - for rakhunok of speech, scho glue. It is simply unrealistic to stick to the surface of the shutter, so that the shutter can be closed with a fingernail. If you let the knife go, then there is a great deal of efficiency for the screen and body of the smartphone.

Silikonova suction cup may be ineffective. If the surface is tightly closed, then there is no vacuum in front of it, and the suction cup is simply in the fall. With good heating, there are also fewer problems with suction. The sensor is fastened to the body with a German adhesive tape, and if you don’t use any power, you can install a loop or remove the screen module. The axis of the thought over the protection of the process is strictly based on the algorithm of binding.

Important! As soon as you have violated it, you have changed the slope for a larger budgetary trip, and you didn’t go well for the first time, it’s not necessary to buy a new one. Our publication will help you to get the best out of your problems.

How can you clean up your smartphone or iPhone?

For the cob to grow and pick up the necessary arsenal of supplies. Why do you know how to know the booth itself:

1. 2 plastic cards, mediator and scapula.
2. Suction cup silikonov.
3. Servetka from lint-free material.
4. Skloochisnik, scho to revenge alcohol (you can replace it with a bitter, cologne or medicinal alcohol).
5. Medical gloves.

Algorithm diy, you need to clean it up from iPhone, it is borderline simple, but more effective:

• Really wipe your hands with a sweetheart, hang out or put on mittens. It’s important that the screen didn’t run out of thin air.
• Know on broken sklі non-shkodzheniy (abo naimensh poshkodzheniy) kut. Press down on the suction cups.
• Pry the top with the suction cup behind the support of the scapula or the mediator, so that the edge of the trocha is visible. If so, help yourself with a suction cup, gently pulling on yourself. Do not overdo it, inakse - you can screen the screen.
• In the world, as the screen is visible, deepen the spatula or mediator.

Important! yaksho screen great size, You can instantly vikoristovuvati 2 tools, dripping through in different directions.

• Continue carefully pushing the suction cups on yourself, out of the way.

Yak bachite, replace it with a quick, especially folding no-nonsense. Robot vimagaє only patience, care and scrupulousness.

Yak correctly poke sklo?

How can you most correctly and clearly stick the bulletproof glass? As soon as you know, you’ll get off the phone in your home minds - they’re getting off the phone. Now about those who will fix the new surface on the display. A new part of the ball is glued clearly, the procedure must be carried out in a clean, free-running saw.

Important! Before gluing, wipe the servet from a lint-free material in alcoholic wine and wipe the screen. Do not allow the power, display, and adhesion of the two surfaces.

The algorithm for gluing is as follows:

• Take a new slope by the edges. When you are guilty, your hands are clean, dry, or in medical mittens.
• Know the flow from the surface of the slope by pulling the tongue. At the same time, trim the slope closer to the screen of the gadget, so that you do not allow the sawing to get on the surface.
• Give the surface of the slope behind a circle of milimeters from the display and retract it.

Important! Follow the team, open the camera, dynamo, keyboard and other components.

• Find the slope behind the screen. Once you've settled down, you can shake it up, turn it to the brim with a dry, clean cloth.

Important! I’ll take care of it only for the screen. As long as your smartphone model does not look like a dim case, look at it as well as a type of case. For you, it’s simpler to see it, as if it’s better and more responsive, it’s been brought in around the statute.