Siphon system for internal drainage of Geberit. Vodostik

TYPICAL TECHNOLOGICAL CARD

Installation of a siphon system for an internal drain GEBERIT PLUVIA

1. AREA OF DISCLAIMER

1. AREA OF DISCLAIMER

A typical technological card (TTK) has been stored for the installation of a GEBERIT PLUVIA siphon system for an internal drain.

The TTK is recognized for the recognition of workers and engineering and technical workers with the rules of vikonannya robit, as well as with the method of victoria in the development of projects for vikonannya robit, projects in the organization of everyday life, and other organizational and technological documentation.

Сифонна система внутрішнього водостоку Geberit Pluvia широко використовується в промисловому та комерційному секторах для покрівель площею понад 1000 м. Принцип роботи та висока пропускна здатність системи водостоку дозволяють використовувати її в різних областях: плоскі покрівлі, куполоподібні та арочні дахи різної кривизни, інверсійні та озеленені. both with extensive and intensive landscaping. The design of Geberit Pluvia is especially effective in the design of factories, warehouses, shopping centers, airports, hotels, sports centers, etc.

2. TOP POSITIONS

The system is based on the principle of the siphon effect and the vicorist method of precise sizing of pipe diameters. Necessary umovoy є 60-100% of the filling of the system, as it is accessible by the rozrahunka on the ProPlanner Pluvia computer program.

Fig.1. The system consists of priymalnyh lіyok on krіvlі, pipes and fittings from Geberit HDPE, as well as the original system of steel reinforcement.

Stovp rіdini, scho falling into the riser, creating a distribution and hoarding new portions of water from the cover. In this case, the primary funnel creates a significant increase in the further sharp increase in the productivity of the entire system.

Geberit Pluvia's siphon pipe allows you to efficiently and efficiently bring down water from larger roofs with smaller pipe diameters, similar to the traditional system. At the same time, it is not necessary for horizontal pipelines to lose that temperature compensation. The system is mounted according to the principle of hard throating on anchor supports. Changing the diameter and number of pipes and risers to bring to a speedy contract and vartosti budіvelno-assembly work. Geberit Pluvia can be absolutely hermetic due to the stick sealing of the pipes, it takes up less space and can have a self-cleaning effect due to the greater fluidity of the flow. Zgіdno z dіyuchimi budіvelnimi norms, with a decrease in coverage less than 1.5% of roserakhunkov's vitrate of rainwater for Moscow to become 80 l/ha (q20). However, in order to improve the changing climate and increase the intensity of rainfall, Geberit recommends focusing on a value of 196 k.s/ha (q5), with a decrease in cover to 1.5%. On the basis of the calculated value, it was planned to arrange the construction and installation of the Geberit Pluvia system at the great hypermarkets AUCHAN, METRO, MEGA-1 and at other facilities. The system was approved by TU 4923-001-00284581-2004, approved by NDI Plumbing 25.11.2004.

The operation of the Geberit Pluvia system is based on the vacuum siphon principle. It is made up of roof linings, pipes and fittings with low-pressure polyethylene (HDPE) Geberit, a system of fastening and a professional package of services for technical support from a picker. Based on the siphon principle of the Geberit Pluvia robot, it ensures the safe passage of water, without worrying about the sag of the pipes. The high productivity of the system allows the maximum speed of the number of risers and discharges from the pipeline with the traditional system.

Zavdyakova nadіynostі and gnuchkostі at zastosuvanni Geberit Pluvia system richly vikoristovuєtsya conducted by architects and engineers in the design of the most significant objects.

Fig.2. The service life of horizontal pipelines in the Pluvia system gives the ability to speed up the repair work required for the system, and to implement the most smart architectural and engineering solutions.

The Pluvia drainage system (at the crossroads from lativ. "dosch") is based on the gravitational-vacuum principle. Under the hour of the collapse of the stovpa, under the influence of the force of gravity, the rise of the rise, the maximum value of which is reachable at the upper point of the riser. The discharge is transmitted by a horizontal collector to the entry point of the water - the priming funnel. The siphon effect results in a spetsialny zavdyaka of a special design virv and an exact rozrahunka of diameters of pipes, which sprays the maximum filling with water. The principle of operation of the Pluvia system is summing up the advantages in parallel with the traditional system: changing the diameter of the pipes and the number of funnels, including the deterioration of horizontal drains and pipes at the base of the building.

The pipes are connected by the hot welding method (in important places - with electrofusible couplings) and are mounted from a large number of anchor supports without the installation of temperature compensators. In this way, the drainage system becomes more airtight.

Fig.3. Receiver Geberit Pluvia

Fig.4. Geberit Pluvia pipe support system

3. ORGANIZATION AND TECHNOLOGY VICONANNYA ROBOT

The Geberit Pluvia system is fastened like this:

- horizontal fastening - behind the additional Pluvia fastening system;

- vertically fastened - with expansion joint sleeves;

- horizontal and vertical fastening - for additional hard installation.

The Geberit PluviaFix piping fixing system was specially designed for the installation of horizontal pipelines in the Geberit Pluvia siphon system. Zusillya, caused by temperature changes in pipes, are transferred to anchor supports and further to a steel square profile (tire), which compensates for mechanical stress, which is to blame. The Geberit PluviaFix installation system guarantees a smooth installation, fewer fastening points to the roof, the possibility of front picking up to four knots.

Fig.5. Geberit Pluvia internal drainage system:

Pіdvіska (rіzbova stud M10); - unruly support; - crumbling support; - Vіdstan mіzh pіdvіskami; - Vіdstan mіzh brackets; - Vіdstan mіzh unbreakable supports; - vaga povnіstyu zapovneї system on pіdvіstsі

Stand between the brackets for the Geberit Pluvia fixing system

This fixing system has been specially designed for the horizontal shafts of the Pluvia siphon system.

Fig.6. Zusillya, caused by temperature changes in pipes, are transferred to anchor supports and further to a steel square profile (tire), which compensates for mechanical stress, which is to blame.

Fig.7. Fastening of pipelines to the Pluvia support profile

Kovzayuchi supports are installed on the advancing stands ():

Pipes 40 mm to 75 mm - leather 0.8 m

Pipe 90 mm - leather 0.9 m

Pipe 110 mm - leather 1.1 m

Pipe 125 mm - leather 1.25 m

Pipe 160 mm - leather 1.6 m

Pipe 200 mm - leather 2.0 m

Pipe 250 mm - leather 1.7 m

Pipe 315 mm - leather 1.7 m

The supporting profile can be 5 meters long, mounted on the entire length of the pipeline, closed with special elements.

Fig.8. Fastening of pipelines without a middle to concrete overlap

Fig.9. Methods of fastening pipelines to the support rail

Anchor supports are installed in this order (Fig. 10):

1. On the cob and in the end of the pipeline.

2. On the skin tee to the inlet of the pipeline collector.

3. Through the skin 5 meters behind the length of the pipeline.

Fig.10. Installation of anchor supports

Two anchor supports are installed on the skin tee - one on the skin tee in direct flow, which is connected. Below is shown the options for the expansion of anchor supports (Fig. 10).

1. For the help of electrical welding lines.

2. For the help of electric welding couplings.

3. For additional flange bushings (for 125 and 200 mm).

Installation of vertical pipelines Geberit Pluvia

Fig.11. Installation of Geberit Pluvia vertical pipelines with thermal expansion compensation

Fig.12. Installation of vertical pipelines in Geberit Pluvia without compensation (more fixing)

Virva Geberit Pluvia 19 l / s, with flange for insertion into the tray. vendor code: 359.034.00.1

Gaberit Pluvia stock 359.034.00.1:

• For siphon system of water supply;
• For the selection of that introduction of wooden water from the cover;
• For installation at the zholobi with a width of at least 21 cm;
• For piping to concrete zholobiv and zholobiv from stainless steel.

Technical data:

• The maximum height of the support is 55 mm;
• The minimum throughput of the building is 1 l/s;
• The maximum throughput capacity is 19 l/s.

Complete set:

• Mounting block made of chromium-nickel steel;
• Grati virvi with a functional disk and a rotary locking shutter in blue color;
• 6 colored dowels made of chromium-nickel steel.

Characteristics:

• Good spigot made of PE-HD;
• Outlet pipe with the possibility of an uninterrupted transition to a smaller / larger diameter;
• Outlet pipe can be shortened;
• Diameter 75 mm.

The Gaberit Pluvia system is based on the gravity-vacuum principle. Under the hour of the collapse of the stovpa, under the influence of the force of gravity, the charge is discharged, the maximum value of which is reachable at the upper point of the riser. The discharge is transmitted by a horizontal collector to the entry point of the water - the priming funnel. This siphon effect is due to the special design of the pipes and the exact expansion of the pipe diameters for maximum filling with water.

The Gaberit Pluvia windings are widely used in industrial and civil living for covering an area of ​​over 1000 m2. The principle of operation and high throughput allows building a vicor system in various areas of congestion: flat roofing, dome-like and arched dachas of varying curvature, inverse and landscaped roofing. Particularly effective is the use of the Pluvia system in such projects as backwaters, warehouses, shopping centers, airports, hotels, sports centers, etc.

The Geberit Pluvia waterproofing system is based on the gravitational-vacuum principle. Virvi Geberit is especially constructive, the winds of which the pipes are suddenly filled with water and the intestines do not settle in the pipelines.

Advantages of the Geberit Pluvia drainage system

The Geberit Pluvia water drainage system may have some advantages compared to traditional water drainage systems:

• Changed the number of pipes Geberit, standing pipes and pipelines;
• Changed pipe diameter;
• No need for horizontal pipelines;
• Weekly pipelines on substations;
• Reduced number of tickets from work;
• A system that self-cleansing;
• Increased the productivity of the rahunok to the effect of smoking.

The principle of the Geberit Pluvia drainage system:

Fastening of the Geberit Pluvia drainage system

Virvi Geberit and the waterproof pipework are fixed behind the help of a specially divided system of reinforcement. The anchoring system was designed for horizontal poles to the Geberit Pluvia pipeline - susilla, which are forced by temperature changes to the pipeline, are transferred to anchor supports, and then on steel square profiles (tires), which are compensated for by mechanical stress.

The choice of this system of reinforcement gives the following advances:

• speed up installation;
• Decrease the number of anchoring points to cover;
• Temperature expansion is controlled;
• Okremі vuzli can be zazdalegіd zіbranі;
• For forging and anchor supports, a universal bracket is used.

The mounting example is shown in the image below:

RA - stand, on some of the faults the forge supports are installed:

• For pipes with diameters from 40 to 75 mm - leather 0.8 m;
• For pipes DN 90 mm - leather 0.9 m;
• For pipes DN 110 mm - leather 1.1 m;
• For pipes DN 125 mm - leather 1.25 m;
• For pipes DN 160 mm - leather 1.6 m;
• For pipes DN 200 mm - leather 2.0 m;
• For pipes DN 250 mm - leather 1.7 m;
• For pipes DN 315 mm - leather 1.7 m.

The length of the support profile should be 5 m and the veins are installed along the entire length of the pipeline.

Butt of fastening of the drainage system to the concrete overlap:

The order of installation of anchor supports:

• On the cob and in the end of the pipeline;
• On the skin z triynikov chi inlet of the pipeline collector;
• Per skin 5 meters.

On the tees, install two anchor supports - along one skin direct flow. Anchor supports can be mounted behind the help of electrically welded couplings, electrically welded lines or flange bushings.

Vertical installation of the Geberit Pluvia system

The distance between forged supports is shown in the tables:

Typical pardons for installation

Fahіvtsі company Geberit for an hour of their activity chose the most widened pardon for the installation of a drainage system.

1. Wrong choice of elements. For example, often choose Geberit funnels that are not suitable for a particular type of coating. Also, sometimes changes are made to the design of the drainage system, and often such changes are made so that all the features of the project were not guaranteed. Deyakі assemblers independently in such situations try to find out the solution of problems directly on the weekly Maidan, for example, by installing non-standard components on Geberit's virva.

2. Choice of inconspicuous fastenings - the installers choose fastenings that do not damage the features of the building structure. For the butt, if there are no necessary non-violent supports, then the vibration of the pipes may begin, and if, in the case of vertical installation, compensatory sleeves do not vibrate, then at the pipeline, the movement of the susilla will be blamed through temperature changes, it is necessary, it is necessary to compensate for the installations installed on the large pipe clamps not less than 1/2?). Zusilla in places from such fortified developments, and therefore not all everyday constructions can be seen.

3. Workers installers combine Geberit roofing on the roofing plots with a great elevation difference - more than 4 m. However, such a solution can be brought to a winding water through the Geberit windings, which are located on the lower covering plots.

4. Connecting up to one extension covering an area of ​​more than 5000 m2 - call for mercy if you want to forgive the system.

5. Rozrahunka vitrata of the rainwaters was appointed in Pomilkovo. The reason for such a pardon could be a lot of things, for example, inaccuracies in the development of the water intake area on folding roofs. Such pardons can lead to unstable operation of the entire system and cause flooding of the roof.

6. Incorrect installation. In the wake of a pardon during installation, they become critical. So, incorrectly installed elements of the Geberit funnel, defects in the seams, breaks during sealing are thin. can destabilize the trough.

In order to avoid these and other pardons during the installation of the Geberit Pluvia system, it is necessary to follow all the recommendations of the contractor when installing the pipeline.

The scope of zastosuvannya is the principle of robotics.

Drainage systemPluvia (at the translation of lat. “board”) is based on the gravitational-vacuum principle. Zavdyaki spetsіalnіy konstruktsiї virv i exact rozrahunka diametrіv pipes at the riser filled with water, in the case of Russian stovpa rіdini pіd vplyom tyazhіnnya vinikає rozrіdzhennya, the maximum value of which is reachable at the upper point of the riser. The discharge is transmitted by a horizontal collector to the entry point of the water - the priming funnel. The principle of operation of the Geberit Pluvia system zooms in on the progress in parallel with the traditional system: changing the diameter of the pipes and the number of funnels, including the loss of horizontal drains and pipes at the base of the building.

Varto indicates the strength of Geberit HDPE pipes, which are victorious in the Pluvia system. The pipes are connected by the hot welding method (in important places - with electrofusible couplings) and are mounted from a large number of anchor supports without the installation of temperature compensators. In this way, the drainage system becomes more airtight.

Advantages of the Geberit Pluvia system, similar to the traditional system.

1. Change in the number of pipes, standpipes and pipelines.
2. Changing the diameter of the pipes and the future volume of the system.
3. Vіdsutnіst vіdsutnіst ukhila horizontal piping, scho on the great pokrіvlyakh can reach a few meters.
4. Vidsutn_st piping on the pdstav_ bud_vl_.
5. Change in the number of visas from work.
6. The high building of the system, which is self-cleaning.
7. Optimization of the current borders for the re-rolling of the tickets for one bill.
8. Possibility of forward preparation of the nodes of the system.

Components and control systems Pluvia.

• Receive virvi Geberit Pluvia
• Pipes and fittings Geberit HDPE
• Pipeline fixing system Geberit Pluvia
• Geberit computer software ProPlanner Pluvia
• Geberit technical support
• Geberit guarantee 10 years
• Minimum system service term 50 years

Receive virvi Geberit Pluvia.

The firm Geberit has developed virvi with different wool for any geographic latitudes. In Europe and Russia, funnels with a maximum productivity of 12 and 25 l / s are installed. For tropical regions, modifications up to 100 l/s are available. A wide range of aprons of waterproofing materials, as well as different flanges for zvaryuvannya in the gutters, allow you to install virvi on any kind of roofing. Virvi can be equipped with a heating element for frost protection during the transitional period (spring and autumn).

Pipe and fitting Geberit HDPE.

In the system Geberit Pluvia vicorous pipes and fittings are made of high-yield low-density polyethylene (HDPE). Perevagi tsgogo material good vіdomі. Vіn maє high mechanical strength, chemical inertness and stability to the point of unfriendly atmospheric factors. The term of this service is to become less than 50 years old. The elasticity of the material filled with water, the HDPE pipe, when frozen, expands, does not collapse, but after defrosting, it takes on a shape. HDPE pipes can be easily welded to the stick, and importantly accessible places can be manually closed behind the help of electrically welded couplings.

Computer program Geberit ProPlanner Pluvia.

For the development of a victorious software product, the expansion by the Geberit company - ProPlanner Pluvia.

This program allows you to automatically open the diameters of all pipelines so that the water from the dry lines is covered, the water is drained on the different lines, it is carried out in one hour, and it does not bleed again through the watering cans. The program looks like an isometric chair of the risers, and a hydraulic installation of the system with all the specifics of the materials required for installation.

Pipeline fixing system Geberit Pluvia.

This fixing system has been specially designed for the horizontal shafts of the Pluvia siphon system. Zusillya, caused by temperature changes in pipes, are transferred to anchor supports and further to a steel square profile (tire), which compensates for mechanical stress, which is to blame.

Benefits of the Geberit Pluvia anchoring system

1. Shvidky installation.

2. Less anchor point to cover.

3. Controlling the temperature expansion, just filling.

4. Possibly in front of the folding of the okremi vuzlіv.

5. Vikoristannya universal bracket for forging and anchor support.

Fastening of pipelines to the supporting profile Pluvia.

Kovzayuchi supports are installed on the advancing stands ( RA):

Pipes from d-40mm to d-75mm - leather 0.8m

Pipe d-90mm - leather 0.9m

Pipe d-110mm - leather 1.1m

Trumpet d -125mm - leather 1.25m

Pipe d-160mm - leather 1.6m

Pipe d-200mm - leather 2.0m

Pipe d-250mm - leather 1.7m

Pipe d-315mm - leather 1.7m

The supporting profile can be 5 meters long, mounted on the entire length of the pipeline, closed with special elements.

Fastening of pipelines without a middle to concrete overlap.

Methods of fastening pipelines to the support rail.

Anchor supports are installed in the following order:

1. On the cob that, for example, pipe-working plant. 2. On the skin tee chi inlet of the pipeline collector. 3. Through the skin 5 meters behind the pipeline.	Two anchor supports are installed on the skin tee - one on the skin tee in direct flow, which is connected. Below is shown the options for the expansion of anchor supports. For the help of electric welding lines. For the help of electric welding couplings. For additional flange bushings (for d-125 and 200mm).

Installation of vertical pipelines Geberit Pluvia.

It is permissible to stand between forged supports on vertical plots:

In times of fastening without a middle to concrete, the anchor support, both for horizontal and for vertical installation, is mounted with an offensive rank:

Woozley system arrivalGeberit Pluvia to the traditional gutter system and to the standard gutter.

Before the release at the bottom of the trough, it is necessary to start the transition from the siphon mode to the self-flowing mode, bypassing the drain at least 2 meters before the well (div. Fig. A). For which one, it is necessary to increase the diameter by 2 sizes (div. Fig. B and C).

Rules for servicing reception liyok Geberit Pluvia .

In the process of operation of the roof, especially flat roofs, it is necessary to carry out periodic maintenance of the primal liyok. Wirvi those bowls need to be cleaned in the sight of the great smitta, leaves, as if they could block the overflow of the wood water. The periodicity of the cleaning carried out is considered to be quite reasonable until the maintenance program and the weather minds for the period of operation. Before the hour of purification, it is necessary to remove and wash the upper part of the funnel, and also clean the bowl from the stray.

Typical options for installation of water heaters

Installation in operation or inversion cover.

ZastosuvannyaGeberit Pluvia.

· Over 30 years of practical victoria

· 60 000 great projects in the world

· Ponad 120 000 000 sq. m.

· Ponad 5 000 000 sq. m.

Siphon systemGeberit Pluvia is not a simple set of funnels, pipes, fittings and roofing elements - it is a complex system, which allows you to do whatever is technically necessary for the installation of wood flooring and roofing.

Certification of practitioners in the company MEZAKOM.

TOV "MEZAKOM" is a project partner of Geberit International Sales AG in the Russian Federation.

Usy work for the installation of internal drainage systems Geberit Pluvia conduct certified spivpratsiyu company nicknames.

At this hour, the introduction of rainwater and rainwater from dahiv will be organized by unorganized discounts along the eaves and organized water supply by outside and internal drains. The internal drainage systems are made up of water-drainage (priymalnyh) virv, standpipes, secondary (suspended and lower) pipelines and outlets. According to the principle, two internal systems are subdivided into self-feeding and siphon systems.

In self-pumping systems, water is collected by drain funnels and injected into the pipelines, which are drained. Rozrahunok piping vykonuєtsya z chastkovy їkh zapovnennya.

In siphon systems, internal drain Pluvia Swiss companies Geberit the pipeline system will be filled with water. Vinikaє uninterrupted water stovp vіd virvi on daha before switching to a traditional self-pumping sewer system. Doshchova water accumulates on the surface covering up to the singing level. For the rahunok, the vise is driven, which is pushed, the water column is pressed through the selected pipeline. If the water column begins to fall at the vertical riser, the entire water supply system will experience a decrease in pressure, for the height of such a floor, water will enter the pipeline system.

Once again, it is not guilty to enter the siphon filling system in order to maintain a complete filling of the pipeline and the siphon effect. Tse reach for the leak tightness and accurate selection of the expansion of the pipeline system. Special design water intake virv Pluvia and the outer tightness of the sticks will prevent penetration through the middle of the system. Virvi is provided with a flow stabilizer, which allows the water to pass through the bottom sideways without turning it on again. For water pipes piping system Geberit HDPE .

Trumpet and fittings Geberit HDPE they are connected by the method of zvaryuvannya vstik (in important places - with electrically welded couplings) and are mounted with special reinforcement bars and a large number of anchor supports without installing temperature compensators. In this way, the drainage system becomes more airtight.

With a non-intensive doschi systemGeberit Pluvia dіє similarly to the traditional self-pumping drainage system - the pipeline system is only partially filled with wood water (chastkovy zapovnennya). For a strong plank, the traditional self-watering system of the internal drain continues to be partially filled, even siphon system Geberit Pluvia overflowing with water through a smaller pipe diameter (overfilling). Due to the fluctuations of this, the cumulative effect is created and the productivity of the system increases dramatically.

Through the high productivity of the siphon system, pourGeberit Pluvia Large areas of roofing can be drained by a small number of risers, which will simplify the design, soon vitrati that trivality of everyday work.

Self-propelled system (non-intensive dosch)

Self-propelled system (intensive dosch)

System Geberit Pluvia (non-intensive dosch)

System Geberit Pluvia (intense dosch)

The principle of the robotic system Pluvia zumovlyuє її wins in pairs with the traditional system:

changing the diameter of pipes and the number of funnels;

vіdsutnіst vіdsutnіst vіdsutnіst ukhila horizontal dіlyanok dіlyanok gаt piping vіdstavі budіvlі.

For a high air flow rate, the self-cleaning of pipelines is ensured. A special mode of flow in the middle of the system allows optimizing the external barriers and transferring the outlets to the required side. Vikoristannya pipes Geberit HDPE to give the possibility of forward selection of the nodes of the system.

Geberit Pluvia system you can win in different summers: cold, warm, summers with landscaping and other. The most efficient system for large flat roofs and folding doors with internal gutters. For both types of roofing, different options are used, for example: non-insulated (non-insulated roofing), insulated (insulated roofing), insulated with vapor barrier, attached to the transfer of people and transport facilities with landscaping.

For rozrahunku system vikoristovuetsya special program , split by the company Geberite- ProPlanner Pluvia . The program allows you to automatically expand the diameters of all pipelines so that the water from the existing plots is covered, drained on the different lines, it was carried out one-hour, not vinically pumped again through the watering cans. The program also vikonu є dravlіchny razrahunok system. The results of the rosettes are visible in the tabular form and in the view of the isometric armchairs of the risers. Program ProPlanner warehousing all the specifications of materials required for installation.

Explore the system to lie down according to the intensity of fall, what fall, the dimensions of the surface and structures of the water and the scheme of laying pipelines. Under the hour of the design, it is necessary to re-verify the cover, cover the tiles on the add-ons.pretension in the face of a reversible support of the will of the will. It is especially important for light covers.

When placed virva Pluvia next to come rules :

Virvi razpodіlyat according to the possibility rationally, equally:

Mix the funnels in the lower point on the surface of the dash;

The maximum distance between two watering cans on one drainage column is not guilty of overhanging 20 m;

in order to prevent the damaged functioning of the virus, the rest of the traces of roaming on the wall are less than 1 m in the form of walls, parapets, etc.

Third parties will not be guilty of directing to the systemGeberit Pluvia . The plots are covered with faults, draining okremo, due to the different intensity of falling, the plots were more than 5000 m 2 and / or the height difference is more than 4 m.

Maximum value lowered vise at pipeline systems for pipes Geberit HDPE warehouse:

With diameters from 40 to 160 mm - 800 mbar;

With diameters from 200 to 315 mm - 450 mbar;

With diameters from 200 mm to 315 mm (pipes R N 4) - 800 mbar.

Virvi Pluvia for the introduction of the house will from the dahu can directly go to the pipelines in the system for additional help90 0 . All steps change direction towards 90 0 at the pipeline system Pluvia it is allowed to win only two leads for help 45 0 .

At at different non-thermal insulated roofs and at different protruding ridges you need to come in for protection from freezing, T. before. deyaki delyanki pipes may freeze. Such falls have a zone funnels, as well as the zholobi guilty of defending for the help of a self-regulating cable, which prevents heating ( virvy with pіdіgrіv є in the assortment of the companyGeberit ).

With a difference in temperatures, the drain, the surface of the dahu and the nautical medium on trumpet Geberit Pluvia condensation may occur. For zabіgannya tsomu piping system next post anti-condensate insulation.

Due to the high fluidity of the flow in the pipelines, the noise is equal to the hour of the operation of the system Geberit Pluvia above, below the traditional self-propelled system of the internal drain. In booths without special soundproofing system Geberit Pluvia you can win without additional entries. In buildings with high vimogami to soundproofing, the laying of the pipeline is optimal in terms of noise; virva and pipelines. In order to protect the width of the noise, I will increase the laying of pipelines in the rear at the special soundproof installation channels and/or vibrate the outer soundproofing help trumpeting tiy chi roll insulation.

Geberit Pluvia ends either on a vertical or on a horizontal plot. Gave pipelines with additional fillings ( Geberit Pluvia to pass without pressureself-watering system from private fillings (traditional self-watering drainage system). To create such a transition, it is necessary to transfer a larger diameter to the pipeline.

Coefficient of linear temperature expansion A ForGeberit HDPE warehouse 0.2 mm/(m °C). Temperature difference? T = 50 0Geberit HDPE linear expansion 10 mm per 1 m pipeline. Temperature difference? T= -30 0 With a line shrinkage close to 6 mm per 1 m pipeline.

The change of the pipeline system, which is affected by temperatures, can be regulated by the fixed pipelines for the help of non-robust and rukomi supports. Non-violent supports resist the fluctuations in temperature changes and regulate the pressure of the pipeline at the direct line. Ruhlivі support zapobіgayut botsі vіdhilennya pipeline during temperature changes and carry the weight of the pipeline filled with water.

System Geberit Pluvia creak like this:

Horizontally fastened - behind the auxiliary system reinforcement Pluvia ;

Vertically fastened - with expansion joint sleeves;

Horizontally and vertically fastened - for additional hard installation.

For the installation of horizontal pipes of pipelines in a siphon system zlivi Geberit Pluvia bula specially divided system reinforcement of pipelines Geberit PluviaFix . Zusillya, caused by temperature changes in pipes, are transferred to anchor supports and further to a steel square profile (tire), which compensates for mechanical stress, which is to blame. Mounting system Geberit PluviaFix guarantees a quick installation, less number of fastening points to the cover, the possibility of a forward selection of four knots.

Internal drainage system Geberit Pluvia

A - pіdvіska (rіzbova stud M10);

F - unruly support;

G - crumbling support;

AA - stand between pidvisks;

RA - Vіdstan mіzh brackets;

FA - Vіdstan mіzh unbreakable supports;

FG - Vaga povnistyu zapovnenoy system on p_dv_sts_.

Vіdstan between brackets for the system of fastening Geberit Pluvia