How to enable third-party people from your Wi-Fi network. How to turn on Wi-Fi on a router: instructions and to please Homyak Yak turn on a net on a laptop

Purchases laptop, phone or tablet. A specially vibrating portable attachment for entering the Internet via Wi-Fi in any accessible place. However, the difficulty is not communicated: the call is not matched by the knowledge. What is the reason? Let's get rid of it.

Rizke and rapt, the inclusion of a childless hedge can be roamed through the decal of reasons. The stench is presented below:

• Wi-Fi can be lost through those with the same function of any kind of attachment, be it a laptop, a tablet or a phone, saving a battery charge.
• An important reason may be the presence of a weak Wi-Fi signal.
• Another reason is the lack of transmission of the robotic drivers, including the drivers, which seem to be the robots of the wireless net.

However, as if there were no reason why Wi-Fi was turned on, it’s easy to put all of them down. It is important not to make the necessary settings, or to reinstall the driver. If the driver is the most attractive from the official website of the Wi-Fi network, then there may be some serious problems in the Wi-Fi robot. Let's talk about solving the problems of the report.

How robiti is it when a weak signal is evident or a strong transient code has been rejected?

The Danish factor є to end up with a frequent reason for connecting a Wi-Fi connection. Scho th kazati, tse pokrittya zasnovane on radio signals, as you can steal. About rivn signal varto directly say, wіn doesn’t expect to be stable. On the new one is infused with deyaki factors, which are the most significant - a sprinkle in an electric net. Nayrіznomanіtnіshі elektrіchnіy take part in the current transition, as sometimes you can be strong enough to override the extended Wi-Fi signal.

It is even more possible to change the appearance of metal objects in a portable attachment and a router. When roztashuvanny laptop to reach the great output from the point of expansion, the signal is periodically possible to know. That Wi-Fi is enabled. The yak has already begun, the signal is not stable.

When a laptop, a phone or a tablet is removed, close to the router, the calls are uncomfortable, and when the stench comes back, the repair becomes more pronounced, and the Wi-Fi calls get shaved into the bag. Particularly negative influx on the call comes from mobile phones or microchilles. The problem can be overcome by moving the laptop closer to the mouthless router.

Problems related to the economy of the battery charge

Like vidomo, one of the main functions of a laptop, tablet or phone є is an autonomous robot, which can reach the battery charge. A special program has been launched at the connection with the czm robniki, which allows the economy of energy, and automatically switches the module on during the last hour.

They also need a Wi-Fi adapter. It’s quite easy to connect, because it’s not victorious. However, the program gives rise to malfunctions and as a result of unstable connection from the Wi-Fi adapter, it can be connected through a matter of an hour in the absence of the fact that an Internet connection is required at any given moment, or is not required.

Virishity can describe the problem by enabling the guessing parameter. Schob tse zrobiti, you need to screw up the badge of the battery in the lower right corner of the screen. If you vibrate yogo, go to the "Advanced parameters for the battery life", and then set your own with the optimal aging plan. Here you can experiment at all, until you know the optimal plan.

On completion it is necessary to vibrate the icon "Zminity". Show up in the window "Regime energy saving". Here, it is necessary to set the maximum productivity of the battery when robotic from the battery, as well as when it functions from the bottom. Thus, automatically turning on the Wi-Fi adapter will become inactive. At the bag, Wi-Fi will not be able to learn about rapt.

However, if the whole robot is of the correct rank, is it all the same to be seen after connecting to Wi-Fi? This means that in the most operational system installed Electricity economy settings... This function can be connected with the help of the "Center for the management of mouthless fences and remote access". Everything is necessary, so press the right mouse button on the Wi-Fi end. Then the next step is to vibrate the necessary splash point - "Parameters change". Here it is necessary to see the shortcut of a mouthless reading and click on the new right button. Vlastivost has a vibrati “Merezha”. Then we can go to the "Nalashtuvannya" and vibrate "Management of Kharchuvannya". Then just put a tick in the item "I called connected to the annex with the help of sparing electricity".

How to enable Wi-Fi on a laptop - a link for more Internet connections on special forums and websites. In order to get access to it, go through the path to connect the groove without mouthless attachment, so that it is a module or an adapter. All mobile gadgets, personal computers and laptops are equipped with such attachments.

With the help of this, you will take care of the removal and distribution of traffic from the router. There are a few other ways to switch on from a mouthless system. For the whole there are special labels, buttons on the case, combination of keys and іnshi.

In the midst of the majestic series of virobniks in laptops, the most popular ones can be called a number of new brands:

• the Chinese brand Lenovo has long been famous for its good quality, productivity and functionality;
• Dell brand - є one of the first laptops virobniks;
• HP Company (Hewlett Packard) is one of the premier branch-wise and official technologies.

To brutalize respect! It is important that most laptops come with Windows.

On this day, all devices are presented with the ability to access the Internet without a child. Wi-Fi connection technology is used for the whole system. Deyakі koristuvachі vvazayut for more beautifully plug in the fencing module and access to the fencing in front of the plugged-in annex and if the Internet is not used.

You can connect with a decalcom in ways. Old devices often lacked special important buttons, as they could enable Wi-Fi connection on a laptop, so if you reactivate it again, we will forgive any changes or pressures. Over the course of the year, some additional systems have gone by. Every year, practically all companies provide laptops, as there is a special keyboard set for activating and deactivating mouthless data.

Do not shukati a special set of keys for a special device, even if all the stinks may be special. For example, if you want to get Wi-Fi access on a laptop of any brand, it will be necessary to press the Fn key and key from the F1-F12 row at once. It is necessary to identify with the antenna or is similar. Overnightly zatiskannya - a secure vbudovaniya way to enable access to the hem.

Yak vimikati mode "Vindovs"

The Windows operating system can be used for a variety of different methods for connecting mouthless data. For more methods, it is necessary to select the parameters of the system, the dispatcher of the control or the center of the zalny access. However, one more simple way to achieve this is to open a shortcut, for which you can quickly turn on Wi-Fi whenever it is not necessary.

For the whole, it is necessary to carry out a set of singing events:

• open the folder under the name "Merezhevi Connected" in the "Control Panel";
• show the badge for the koristuvach access to the required name, on which it is necessary to press the right button of the Misha and vibrate "Create a yarlik";
• to deactivate the connection, it is necessary to press on the label with the right mouse button and vibrate "Connect".

Important! For Windows 10, the views are not practical.

There you can only turn on the Internet to the onslaught on the shortcut and the vibrator of the button. However, if necessary, the "Turn on" button does not turn into "Turn on".

Є another method. There are two special files in the functions, for the help of which you can quickly edit all the files. With this rank, the access point is included as follows:

1. On the working table of the PC, it is recommended to open a text document and name it, whether it be a name, ale only from the posting of extensions.bat.
2. When writing a document, it should be displayed and inserted into a special launch command. For example, where the hedgehog module is called "Ethernet", the same file for connecting netsh interface set interface name = "Ethernet" enable. Apparently, netsh interface set interface name = "Ethernet" disable in the file for inclusion.
3. When finished, it is necessary to save the introduced changes.

Victory of the other methods

There are few ways to connect to Wi-Fi.

system parameters

To connect to the Internet via Wi-Fi in a presented way, you need to open the "Start" menu and vibrate the "Parameters" section, which is a gear. You will see the icon "Merezha and Internet", after you have entered the "Bezdrotova festoon" message, you need to deactivate it. Yogo slide to translate into position "Connect".

To brutalize respect! Algorithm of representations for the operating system Windows 10, for other versions of the set of crocs is similar.

Attachment manager

An adapter for mouthless plugs is a physical part of a laptop, then it can be plugged into an attachment manager, as if it were an attachment. First, you need to run a separate distribution. The price can be visited in different ways:

• behind the help of the badge "My computer", or rather of the power of authority, in what would be the idea of ​​shuking point;
• behind the additional system control panel, de є the icon "Attachments";
• through the service "Viconati" і ін.

We'll forgive as much as possible і by a quick method to reach the necessary distribution є immediately onslaught of the Windows + R keys. Writing must be confirmed by Enter. There was a sign of "Merezhev modules" in what would be designated for a koristuvach pristriy.

If you want to see all the shows, it will be necessary to start:

1. press the right mouse button onto the required adapter;
2. to open a splitting menu, in which it is necessary to vibrate the item "Connect";
3. In any case, it is necessary to confirm the order;
4. at the moment of confirmation it will be turned on outside the connection of the mouthless module;
5. If activation is required, then the Viconati can be identically, only if you need to connect "Connect".

Important! Practically all brandy, which play laptops, wicker modules, only two virobniks - "Broadcom" or "Ateros". Indiscriminately, the name of the adapter is matime, the format is fixed to the 802.11 standard.

Control center

Rozdil "Center for fencing and access control" is faced with attacks on the icon in the lower right corner of the panel on the work table. Viglyada vіn at viglyadі points and three 1/4 kilos, so go out from her. The center can be launched by pressing the right button of the Misha at the end of the end. When you see the following message:

1. display and display the item "Change adapter parameters";
2. at vіknі, slіd click on the plug-in label with the right button and vibrate "Vіdklyuchiti";
3. It will turn on and off, just like the onslaught of one button.

However, there will be no guarantee of the physical connection of the module, which will only deactivate the connection via Wi-Fi.

Besides, it is possible to connect to the singing, mouthless hedge using an additional method. For the whole, it will be necessary for the already known badge in the lower right couture to press with a left button. Todi viplive list of all available data. One of them will be marked "Connected". On a new slid, press the left button and vibrate the "Turn on" item.

To brutalize respect! If you need it, go to the last available stock from the list or connect the old one. You can vibrate the item "Connect automatically". In such cases, it will be displayed on its own when the laptop is turned on from the skin.

Command row

The submission method is only for presenters. It is tied together, which for a shvidkoy robot with a command row needs to remember a great number of commands. It is not at once a viable method, although it is difficult to achieve a simple and smart one.

To start the command row, it will be necessary to press Windows + R one hour, or in the start menu, vibrate the item "Viconati", in the row you need to enter cmd. The message will be displayed as a new screen with a black background. Tse і є shukan command row.

They need to introduce writing, the skin has its own function. It is necessary to visit the following:

1. Register a row of netsh wlan show interface. Pislya onslaught Enter, the system will show a list of mouthless modules available for installation.
2. The netsh wlan show networks command, in its own turn, will show you a list of available hedgehogs.
3. It is possible to connect to Wi-Fi connection. For this, you need to enter netsh wlan connect name = ІmyaSetі. To replace the "Іm'ya hedge" next to introduce the іm'ya of the hedgehog home connection.
4. If you connect from a network, you need to assign this command: netsh wlan disconnect.

To brutalize respect! There is a whole lot of help, as you can get wi-fi on a "computer", as well as a laptop, right from the version of the operating system and the model of the adapter, or the laptop itself. For the introduction of skin commands, it is necessary to approve the input of Enter.

Connected on older models of devices

I will install a set of keys for accessing Wi-Fi from the laptop computer. From the practice of physical connection for additional changes on the case, it was displayed. At the connection with the cym, there is a single key for deactivating the module in the following brands:

• HP will install a set of Fn + F12;
• Establishment of Samsung is seen as embossed by Fn + F12 or Fn + F9, it is still in the model;
• The Acer company will lock the keys Fn + F3;
• For laptops from Dell family, you can use Fn + F12 or Fn + F2;
• Toshiba keys Fn + F5 or Fn + F8.

Connecting to a laptop Wi-Fi can be viewed in a decalcom way. Koristuvachev needs to vibrate the best and the best. For all, it is recommended to try everything and make sure it is optimal.

All the articles on our site are audited by a technical consultant. If you have run out of food, you can ask for it on this side.

Bezdrotova WiFi technology є Do it with a hand tool for going to the Internet. Ale for a robot of a mouthless module, as for any one I’ll add, it’s necessary to harvest, to reduce the hour of a robot laptop without recharging (as a battery). Through the price of power supply, which can be connected to a laptop to reduce the cost of electricity.

Connecting the mouthless adapter

As a matter of fact, there are several ways to connect the Wi-Fi module on a laptop:

• For an additional combination of keys on the keyboard of the laptop (Fn + button for turning on mouthless modules).
• The dispatcher has possession.
• At the center of fencing.

Leather s of cich methods does not replace one one. So, for example, if you turned on the adapter on the keyboard, then you can't even turn it on in the attachment manager. At the same time, in the center of the management of the fences, you can become active, if you want, in fact, it will not be connected, but the module itself will be connected. The bottom line is that you can turn on Wi-Fi only in the same way as you turned it on. Otzhe, how can I enable mouthless calls on my laptop?

Physical connection to keyboard

If you respectfully look at your keyboard, you will know the Fn keyboard. The keyboard allows you to activate the additional functions of the keyboard of the laptop and, apparently, it is victorious. The upper row of keys, the names of which are to be repaired with the letter "F", will be assigned to the antenna. from the sides of each namalovanі radiohvili).

As soon as Fn and key, as prompted for dumb modules, Wai-Fay will turn on. Once again, the adapter is plugged in. This is the first way to connect to WiFi. Remember, as a rule, at once with Wi-Fi there will be connections and Bluetooth, so as in the vast majority of technologies, one key is used.

How to enable WI-FI on a laptop: Video

Connecting the adapter through the add-on manager

Mouthless module - the same attachment, like a video card, Bluetooth or a sound card. Any of these modules can be enabled in the attachment manager. For the sake of it, let's start the service we need. There are several ways to improve the process:

• Through the power of my computer (system).
• Through the management of the system.
• For the help of the service of "Viconati" and so far.

We can do it in the easiest and fastest way. Onslaught one hour two keys Windows + R. At the vіknі we write this command: mmc devmgmt.msc and onslaught "Ok" or "Enter".

Now we will only need to know the folder "Merezhevі adapters". We know our WiFi module.

As a rule, in laptops, vikorists pay one of two virobniks:

• Broadcom.
• Atheros.

It’s worth noting that there’s a lot of bugs, but, as a rule, you pay from all these companies when you have a bigger laptop installed. Whatever the name, there will be a technology standard "802.11". Know the required module and the onslaught on the new one with the right button of the bear. The menu has a vibramo "Connect".

Show up for changes. The weather is with him and the onslaught is "Tak" or "Ok".

Everything that is sent to the Wi-Fi will be turned on and off. Now you can turn it on and you can do it in the same way. Onslaught on the new one with the right button of the bear and vibrate "Zadiyat".

Connecting a link to the center of fencing management

For a cob, press on the hem icon in the system tray (the area of ​​the work table in the lower right code of the date) with the right button of the bear. Vibiraєmo point "Center for fencing ...".

At the window, go to the section "Change adapter parameters". We know here a jarlik of a mouthless hedge. Onslaught on the new one with the right button of the bear and vibrate "Turn on".

Remember to try to connect to the general community. Only the possibility of a mouthless connection is enabled. You can push back only in a similar way. When you are on the keyboard and in the attachment dispatcher, you cannot activate it. Yak bachite, everything is simpler. And now, let's see it, how to make a connection with WiFi.

For example, if you have connected to a mouthless router, but you want to be connected from a non-connected module. To click on the icon in the system tray with the help of a bear button.

Get information about the current information and the list of available connections. Our zavdannya to know z'єdnannya, like є written "Pidklyucheno". Onslaught on new LFM and onslaught "Vidklyuchennya".

If you just want to cross over to the bottom of the border, then you just want to know from the proponent list and press the bear with a button. We put a tick in the row "Connect automatically" and send the onslaught to "Pidklyuchiti".

Yak bachite, everything is simpler. Don't be overdue, but be respectful. Now you know all the ways, like a keruvati, a mouthless call on a laptop. Please remember that all the ways are not interconnected.

You can also speed up the command row for managing Wi-Fi fences and annexes. Everything is simple here. To start the command line, you just need to press Windows + R keys one hour, write CMD and press “Ok” at the prompt.

Axis set of commands and functions:

• You can see the list of available interfaces by using the following command: netsh wlan show interface. This rank, for my purposes, will call all available Wi-Fi interfaces (modules).
• In order to find out the list of available connections, write down the following command: netsh wlan show networks. In the proponent list, you can know the message.
• Connect to Wi-Fi connection: netsh wlan connect name = NameSet. For example, in my mind, the team of the ma attack viglyad: netsh wlan connect name = Asshole. Asshole - the name of my router.
• To disconnect, write netsh wlan disconnect.

It's easy to finish everything. However, to repent in such a way of management is viciously done, so as to remember all the commands to finish it smoothly. Alle, for some reason, you can’t speed up the connection using the other means of connecting to the mouthless wall, you can register the netsh wlan disconnect command and press Enter and your laptop will connect to the router.

How to enable Wi-Fi on the router: Video

From the smartest development of wifi, just a little about those who turn on wifi, how do they fix it. And if you don’t need it, but your router is set up to distribute a wifi signal. The axis here and power supply - and how to enable wifi on the router.

List of wifi attachments on TP-Link

Amazing Clients on Asus

Enter the settings. On current Asus routers, the Asuswrt firmware is varied. All plugged-in attachments can be pushed by pressing the button - Klinti, which is rocked on the head side of the line. At the right side of the screen, a table is displayed with a list of all connected attachments.

List of wifi attachments on Asus

Amazing Clients on D-Link

Viroblyaєmo enter the settings. We pass to the point - Expansion nalashtuvannya. Here we go to Status> Clients or Wi-Fi> Station List. In the remaining option, there is the possibility of turning on an unreasonable client by ticking the checkbox next to the MAC address and pressing - Rose.

List of wifi attachments on D-Link

How to enable wifi on d-link modems

How can I turn on the router or connect to the childless Wi-Fi (wi-fi)? - the price of food, like turning the bagatokh, vasne, when you read the material, you can independently turn on the router in safe mode, you can also turn on Wi-Fi to the net.

1) Turn on Wi-Fi. 2) Connect the router. (In the attachment, the ASUS router is indicated)

The following statistics will be recognized by those:

• Thanks to the connection, the router will not distribute Wi-Fi, if the robot is connected with a mesh cable for all connections through new attachments.
• A smart way of allowing you to turn off / turn on Wi-Fi using an additional button on the router, or through the administrator (control panel of the router) from a personal computer, tablet or mobile attachment.
• Connecting routers ASUS, D-Link, TP-Link, ZyXEL. If you are using the router of your virobnik, then all one is recommended to get acquainted with the lower instructions, as all the settings are practically identical to all companies to use the router.

Connecting a router or Wi-Fi fancy: what can you do it for?

It is important to follow the electrical attachments that are installed and connected to the booth. So, it is necessary to turn on the router from the electrorezine in case of a threat, or through a tricky way.

It is important: in case of bad weather minds supervised by a thunderstorm, it is recommended that the adapter is connected from the socket to the socket and the netting cable from the router in order to eliminate the internal strips and breakdown of the router. Most of the nutrition is described in the tsy statti: pislya menacing ceasing pratsyuvatiWi-Fi router.

Connect the router with the button

Practically on all modern routers there is a power ON / OFF button. The way to connect the router in this way is even more simple, just press the button and change to the point where all the indicators have gone out. Just as the power on button is open, just plug in the power cable from the router to get out of the way.

How to turn on Wi-Fi I use the buttons or in a remote way (control panel)

Most virobniks equip routers with a button to turn on a mouthless Wi-Fi hedge, which is called “Wi-Fi On / Off”. There is no way to navigate such a meaningfulness, to know it will be simple and intuitively intelligent. To turn on Wi-Fi from the button, it is necessary to press it (in some cases, it will be necessary to press it in the pressed position for up to 4 seconds). With a successful connection of the mothless mesh, the Wi-Fi indicator will be inactive, while the robot will be able to connect to the Internet only by directly connecting the mesh cable "router-computer / laptop".

As I said earlier, not all models of routers can easily connect a mouthless Wi-Fi grid via a button, so there is one way, the so-called remote keruvanny (through the admin panel, attached to a smartphone), which I can go to for additional

UVAGA: In any case, it is not possible to carry out the Wi-Fi connection through the center of the administration, as all the attachments are connected through the childless hedge, but directly from the cable through the cable. As soon as it sounded banal, it didn’t sound trite, to control the settings of the router via Wi-Fi, it’s necessary to connect without a mouth.

Wi-Fi fencing on ASUS routers

ASUS is a software wizard of electronic electronics, step-by-step acquisition of router markets, even though in most models the Wi-Fi connection is not transferred with a button, but instead of being able to access the control panel. Instructions for entering the control panel You can help a router, but I don’t know how it is. Dal, in the business menu, the item "Bezdrotova hemline - Professional" is shukamo and the minimum change is also "Turn on the radio module" in the position "Ні". If you want to change the settings, you need to save it.

The main features of ASUS routers are in the fact that the settings of the control panel allow you to use the Wi-Fi connection automatically at the end of the distribution. The following material has been prepared for this drive: distribution of Wi-Fi robots on ASUS routers.

Wi-Fi connection on TP-LINK routers

One of the most popular Internet attachments in Russia and in most models the Wirobnik will install an additional button for turning on the childless hedge, which is called “Wi-Fi On / Off” or “Wireless On / Off”. You can turn on Wi-Fi simply by pressing the button itself and, if necessary, press it in the pressed position for up to 4 seconds.

To turn on Wi-Fi, you need to press the button itself and press it if necessary for a few seconds. On routers of the advanced models: TP-Link TL-WR740N, TL-WR841ND, TL-WR840N, which are characterized by a budget, and a vidday button.

You can, you can go to the router's setup TP-Link and in the section "Mouthless mode - Setting up a mouthless mode" (Wireless).

Wi-Fi connection on D-LINK routers

To enable the childless mesh, you need to log in to the admin panel ( here ). The vibramo in the business menu has distributed "Wi-Fi" in the list of vibram "Basic settings" and the sign next to the row "Look for a dumb fringe". When you make changes, you need to save your money. To turn on Wi-Fi, the fancy fencing is turning on by ticking the checkbox for moving the childless festoon.

Wi-Fi connection on ZyXEL routers

The router of the ZyXEL company has practically gotten to know its analogs to those of the other viruses, so on the case you can easily know the button with the Wi-Fi icon, as it will take a few seconds to turn on Wi-Fi. The success of the operation is not very good, the Wi-Fi indicator has gone out. It is also possible to turn on the mouthless hemline back by pressing the button on the qiu.

Through the ZyXEL control panel, you can enable Wi-Fi in the "Access points" section by clicking the "Enable access point" checkbox. More detailed information is described in the material: how to enable Wi-Fi on a ZyXEL Keenetic router.

Privit, chanovny readers. More often than not, I see you supplying power to such a plan: what is possible on the router to turn on Wi-Fi, but at the same time, it’s very simple to use it if you don’t distribute the Internet. Imovirno, for a robot, you may need only a lace cable, but you would like to distribute the Internet only for 2 computers / laptop via a cable. And you may be afraid of the router's prominence, if you want to see the efficiently high-speed router's prominence, you can confront and confront. As a rule, on the router there is a button assigned to the connection of the Wi-Fi module. To be afraid of all the loss of one natisnennyam. Ale, it's a pity, don't go to the skin model. On TP LINK TL MR3220, the button is recessed into the body of the attachment, so that you don’t needlessly push it. To press the button, it’s just like it’s an object. Turn on the hem, you need to pull the button again.

If you have such a model of a router, for which a miracle button has not been transferred, turn on the router through the router's setup, how to enter them, you, melodiously, know and yourself. V browsers are entered I'll step on the address 192.168.1.1 (in some vipads 192.168.0.1). Then you need to enter the password and login, as you can wonder on the lower panel of the attachment (for the stench suggestions, you will be asked as admin and admin).

for Asus
On the head side, at once, you will change the point that is called "Radio module for mouthless hedge", And bіlyа nyogo two peremikach - "on" і "Off". vibiraєmo stay, onslaught, Wi-Fi will not be great.

For TP LINK
At the menu item "Nalashtuvannya" you will need to go to the tab Wireless - Wireless Settings(in Russian Mouthless mode - Establishment of a mouthless regime). There vi, check the values ​​with a checkmark. Enable Wireless Router Radio... A tick is tidied up and cleaned up.

Thus, we looked at ways to turn on Wi-Fi on the most popular routers, if you are trying to get away with it, then, just, the radio module on them can be turned on at the Wireless tab or with a special button.

I will write a small instruction, in which I will show you how you can turn on the Wi-Fi module on the Wi-Fi router. What is it all about? That is even simpler, for example, you have a laptop and a computer, a computer for connecting to a router with a mesh cable. And connectivity to Wi-Fi is much more difficult. So you can turn on Wi-Fi in the settings of the router, so that you can go to the booth.

Otzhe, start.

We go into the settings of the router. The browser is displayed and the address is entered in the address row 192.168.1.1 Then you enter the password for accessing the router and the onslaught of "Vidpraviti".

Then go to the "Wireless" tab. If you need to turn on the Wi-Fi module, then just tick the box next to Enable Wireless Router Radio... If you need to turn it on, then check the box, everything is simple :). To save results, press the "Save" button. The changes come into effect when the router is re-enabled.

Good afternoon. Yak the title sounds wonderful, right? Zdavalosya b, look at the Wi-Fi router, turn on Wi-Fi, on those Wi-Fi and Wi-Fi router :). But it’s not so simple, it’s not so simple, but it’s so happy to be guilty of being on my site. As a matter of fact, marveling at the information, I thought to drink the type "How to enable Wi-Fi on a router"є, but it means people need it and make fun of it.

For you may not have a lot of attachments that connect via Wi-Fi, but you bought a Wi-Fi router and connected your computer via cable. In principle, we made the right decision, so there are some attachments that will be connected to the Internet via Wi-Fi early, as a matter of fact, you will be there. Until that hour, the Wi-Fi module can simply be turned on. Options are bagato.

I will write an instruction about those how to enable the Wi-Fi module on TP-Link routers, and more specifically, for me. If you have a D-Link router for example, then I think that the process will not be able to continue. If you have Wi-Fi already connected, then in this way you can turn it on.

Wi-Fi module on TP-Link routers

Otzhe, start.

At the time of setup, it is necessary to connect the router to the computer using a mesh cable.