Yak pereproshuvati the tablet for the help of the computer Correct firmware of the Chinese tablet

LiveSuite- Utilita for flashing tablets on the basis of AllWinner. Before the list of additional models include: AllWinner A10, A13, A20, A31. The program interface is even simpler, and there is also a short guide for the firmware. It is easy to update the firmware - you need to vibrate the required ROM file and start the process. More detailed manual of the placement below.

• Genre: flashing
• Platform: Windows
• Wrap the move to the interface:

1. Zavanazhuєmo driver: /
2. Install Livesuit 1.07 from 1.09EN. For some problems, when installed immediately 1.09, the driver does not get installed, which is more beautiful from 1.07. For today, before the hour of Livesuit 1.07 installation, the driver will be automatically installed. If not everyone has a problem, because if you do not want to fix it, then you need to install additional drivers for your system.
3. We go to the folder where Livesuit 1.09 was downloaded, we know the file LiveSuit.exe and launch
4. Vіknі vibiraєmo "so"

5. At the point of selection of the new mode, select the ones you want. Vibrate a little more beautifully, so that the tails of the previous firmware are not lost. Ale, do it, so all the tributes will be humble.

6. Dali vibiraєmo "Forward"

7. Vibrate the firmware file from the folder, kudi vi її rozarchіvuvali, in front of the entangled

8. Send the firmware vibrator to be displayed at the end of the short instruction during the firmware process. Onslaught the "Finish" button. In any case, LS will automatically ignite in the tray. Turn it around, just click on it in the third, and come back. Now you need to connect the tablet.

9. Give me a tablet. For a complete jam, the button is turned on for 10 seconds. On a PC, the speakers are voiced. Now, on the onslaught of the device, the left button (the "Vol +" button), the cable is connected to the tablet, the "Vol +" button is not available. There was an onslaught just 10 times the live button on the tablet (again, the "Vol +" buttons are not available). The PC is guilty of seeing the sound connected to the add-on, the "Vol +" button is enabled, the PC can see the sound being connected, then the add-on is enabled.

Onoviti operating system A smartphone or a tablet for an additional laptop can be done in a number of ways. Є Methods for reinstalling the software with special programs and programs, as well as for those who need to correctly prepare a memory card. We have the following statistics for you:

1. Yak pass the firmware of the android tablet through a computer
2. You can update the android firmware via a computer without installing special programs
3. Yak to update the software without a computer

FIRMWARE ANDROЇD THROUGH A COMPUTER WITH ADDITIONAL SPECIAL PROGRAMS

Programs for flashing androids through a PC to release a lot of great companies for their attachments. Є і more universal programs as it is easy to cope with the devices of the small companies. It's just that it's easy for a koristuvach to get the firmware of the android tablet through a computer for the additional utility of LiveSuit. Now, hurry up with her, go like this:

1. Manage and install the LiveSuit program on your computer
2. Vibrate and link to hard drive the laptop will be able to update the software version
3. Before the front, charge the device to a minimum of 70%, but the android firmware through the computer was successful
4. Run the LiveSuit file with extensions.
5. Create a backup of your system and your attachment
6. Vibrate re-update mode
7. Make a command "Forward"
8. The program will propon you vibrate new file with firmware - add a path to the vibrational version of the software
9. Move computer speakers
10. The firmware of the android tablet through the computer became mobile, connect to the laptop
11. For a wide selection of gadgets
12. Then insert the USB-cable into the attachment, connect to the computer, and immediately press the button for increasing the purity on the tablet.
13. Do not let go of the keyboard, 5-10 times briefly write on the extension of the annex
14. If you go through the speakers sound signals, release the button
15. Persh nіzh firmware of the android tablet through a computer, live, LiveSuit propones vidformatuvati internal memory attachments. Wait, old files didn't conflict with updates
16. To start the process of reinstalling the software
17. Newsletter "OK" at the end of the update with updates completed
18. Wimit USB cable

In addition, since the android firmware through the computer is finished, you can turn on the tablet and try it out with it, as it is. Ale put in the corystuvachi recommend 2-3 times before the cim.

FIRMWARE ANDROЇD WITHOUT COMPUTER

Update the operating system mobile annex It is possible without the help of third-party supplements, and it is practically possible without the participation of a laptop. For whoever you need to know, there is a memory card and instructions:

1. Charge your tablet or smartphone by 70-100%
2. Create backup systems
3. Reformat the memory card file system FAT32
4. Create directory script
5. Unpack the zip archive with the reverse version of the update
6. Insert the memory card at the display and charge the tablet
7. Umknіt prіtіy
8. Android firmware without a computer can be used automatically
9. After 10-15 minutes, the process will end and the device will turn on when it is updated. Take out the memory card.

You can use a tablet to play. If you want to know how to use the SD card, you can see the script folder from there. Now you can insert її into your mobile attachment.

Bagato hto chose the attachment of the Asus company for the guchne ime of the brand. Ale yak і іnshі Android smartphones That planchette, the stench is not relieved of the singing problems, connected from the firmware. Official utilities for updating the PZ is not, ala, if the pristriy hangs on the locked ones, or you just want to get up new version The OS is easy to build.

We describe the process of flashing an Asus tablet on the butt of a seven-inch Asus k017. The technique can be stored up to the last extensions of the line. You will need an original cable (for Asus it is more beautiful than the complete set), a memory card, a computer for Windows 7 and good internet for adding files. As soon as you browse your tablet, save all the information on your computer. The process is in progress.

Rejuvenation:

Tsya іnstruktsіya is not є a friend to dії. The administration of the resource is not aware of those who use your smartphone or tablet.

Preparation

The drivers will be installed in the standard way. For launching programs Fastboot You will be prompted to provide the director of packaging. More beautiful than hey tse bude drive C... Shlyakh maє viglyadati with the rank of C: Fastboot. From the firmware є singing nuances. It can be viewed on the official software application for our tablet.

If you lock and unpack the archives with the firmware, then add a number of folders to a new one, the file is the same one archive.

If you need to open a memory card, change ifwi.zip v K017_sdupdate.zip... As long as your tablet is the best model, replace K017 and write your number. Now we have copied the files to the memory card, and now the tablet is inserted into the slot.

Also copy boot.img, fastboot.img, splashscreen.img have a folder Fastboot on the CD by S. Tse obov'yazkov umova!

Firmware

The next point is, it’s difficult to walk around the bagatyokh. It is necessary to switch our Asus to the firmware mode. On the installed device zatiskamo that trimaєmo clavish guchnost + that lively... It can be released in 2-3 seconds after the Asus splash screen appears. View the menu of the vantazhuvach. Connect to PC and laptop.

Here you can take a look at the current version of the firmware. As long as the tablet is not zavanazhuvavsya povnotsinno, the whole menu will help you to see it, on the next step of the innovation. Downgrade is not recommended through nebezpeka otrimati "tseglu".

If the attachment is connected, go to the director C: \ Fastboot, de lie the ADB files that boot.img, fastboot.img, splashscreen.img. Press the Shift key to the right of the Misha button. Select the item " View commands window».

Row input fastboot erase ADF that pіdtverdzhuєmo clavіsheyu Enter(you can fastboot.exe erase ADF - reznitsi nemaє). But this reaction is guilty.

As everything goes like this, as it is shown on the screenshot, I will continue to write:

fastboot erase cache

fastboot erase userdata

fastboot erase system

fastboot flash boot boot.img

fastboot flash fastboot fastboot.img

fastboot flash splashscreen splashscreen.img

Do not forget the onslaught of the Enter key from the skin command. By the end of the day, you will see it like that.

The tablet can be viewed from a PC. On the screen, select the Recovery item (according to the menu, change the keys to regulate the purity, select the live button).

Asus will re-install and install the update sooner. Loan process Now it is possible to attach and check the system. The first loan is secured up to 10 hvili. Success with flashing!

For a large number of power supply tablets and flashing it is even impossible to build. As a matter of fact, it’s easy to navigate, it’s simpler to navigate, not a phone. Literally through pіvgodini you know, how to sew a Chinese tablet independently and shvidko.

The firmware itself is:
• office (factory);
• modified (custom).

There is also a shortcut to firmware methods:
• Through Recovery.
• Through ODIN.
• Through the programmer.

The easiest way to flash a tablet

In most cases, if people seem to need the firmware of Chinese tablets, the stench will transfer the updated version of the PZ. Most of the renovation on the outbuildings come up often. Environment, buy gadget, whatever the risk of the bigger one, it is recommended to immediately update it to the maximum available version.

Automatic update

In order to schob zrobiti automatic update annex you need to go to "Parameters" (Parameters) / "Information about attachments" / "Updating software security" push the button "Onoviti"... Attract to show you, where is the update available, and, for your benefit, to lock it up and install the update automatic mode... If you want to write and press the button from time to time "Dali"... The best way to conduct the update is through the high-speed Internet. Just quit to ensure that the battery charge is not less than 40%.

Updating of virobnik

For models on the Windows 8 platform, for updating, you need to add a special installer for your device model. For the whole, it is necessary to go to the site of the virobnik, to find the category there "Pidtrimka", vibrate your model and add it to the preset without starting the file. All the distance can be seen, as in the described way in automatic mode.

Installation of the official version of the firmware

Before Tim, how to install a new firmware, you need to get it. For the whole need a firmware program, a driver for a tablet, and the firmware itself.

Preparatory moments

In order to secure the official version of the PZ, you need to know your preferences on the official website of the virobnik. Writing the text about those, like a monstrous pristіy, there is a version of the system software for the driver. I will upload everything to my computer. If the driver is not known, enter the power supply for any sound system. "lock up the driver + your model will attach"... The driver itself needs to be set from the name of the administrator, to be behind the add-on of the context menu. Krim tsyogo, flashing in this way vimagatime special program... ODIN is available for the application. If the program is locked up, it is not necessary to install it, it just needs to be packed into a folder. Shchepravda, you need to be respected, there are no Cyrillic symbols on the way to it. Most rosarhivuvati їkh at the root of the disc.

Pokrokovі diї for flashing the tablet

Installing a custom version of the firmware on the tablet

The firmware of the tablet is a custom version of the simple, not official. You will need to add a selection of custom zbіrok versions. Krym ts'go to know the low program from Google, the file is named gapps.zip... True, in most cases the file is located in the archive with the firmware, but only once it is brought up to download ok.

Yak reflash the "zovsim" Chinese tablet?

There is a price for summarized copies or gadgets of summative quality, for some virobniks it is not even more intense, including in the plan of PZ. Protect it is possible to stitch it. For anyone in the sound system, write: "lock the firmware + re-name the tablet and model"... Be safe, because a small inaccuracy in the numbers can be caused before the tablet can be converted to "tseglu" and it can be removed through the programmer.

If Yandex and Google do not want to know the firmware, go to Yahoo or I will use the English system. Type there: "firmware for + name the model of your tablet".

At the locked firmware, read the file redme.txt, for the aristocracy and the nuances of the firmware specific models... The formatted memory card from the tablet is bound in the FAT32 system and it is packaged instead of the archived archive.

There will be nothing more robust. It is simply necessary to re-enable the device, which, when locked, can be done by yourself. Shkopravda, perekonayte at yogo charge, oskіlka process borrowing an hour.

Yak to flash a Chinese tablet: Video

Date of publication: 02.10.13

You can get good results

It's easy to do it - just click on social media buttons

Comments

1 2

Kingdia Team 07/28/2016 10:45 AM

I quote anton:

Hello, I have a pixus play three v4-0 tablet based on android 4.4.2 SN PP3V414110450
I'm joking at the new firmware, what can you help me with, on w3bsit3-dns.com marveling there, it's not possible to do it

Good afternoon. On w3bsit3-dns.com everything worked fine, you need to register on the forum. And in the vzagali vibachte, ale to help you know the firmware, I will not help you. Here you wake up yourself.