Vimikach lighting with remote care. Remote vimikach - main view, principle of operation, photo, installation diagram, wiring instructions and installation

In today's minds, electronic devices (vimikachi) know more and more congestion in various areas of human activities, including the usual medium of life - living. The same kind of station has stuck in such an important sphere as the system of lighting living rooms, in which special accessories are installed in sets with a remote control, which control the distance between switching on and turning off the light. With a good look and the order of functioning of such outbuildings, one can recognize a little one that is lower.

The modern remote control of the light with a remote control can be controlled by a folding electronic system, which is composed of a whole series of functional units. The review of the features and the order of the work of the entire complex of equipment for the management of lighting will be assigned to the review article.

Robotic principle

A typical vimikach of the light with a remote control panel works on the principle of transmitting an encoded signal directly to a special primach, which is inserted directly into the lighting fixture. To realize the possibility of switching the remote control from the remote control in the “transmitter-receiver” system, there are classic victories of the infrared or radio band.

In order to establish a direct channel, the link between the equipment is transmitted and received, it is necessary to receive the advancing important minds:

• The control panel is responsible for transferring the generator to the radio frequency band with the possibility of coding the message (її modulation of the signal in this or other way);
• On the side of the input, a receiver is installed, or a remote switch of lighting, building reception, strength and decryption of the signal, which is necessary, and then send a decoded command to the output of the switch;
• For the livelihood of the transmitting outbuilding, it is necessary to use autonomous equipment, as a rule, small-sized elements or batteries are used (look at the photo).

When a decision is made about the independent preparation of a remote signaling system, it is important to choose the type of signaling (either a radio signal), as it will be victorious to transmit a signal to a remote relay.

Important! Depending on the choice, it is not only possible to expand the future vitrates, but also the efficiency of the robotic control system, prepared by hand.

Irrespective of those that traditionally use a radio channel in electrical outbuildings, in the management of attachments of a butt-by-button application, it is not uncommon to get stuck and systems with ik viprominyuvannyam.

Features of DC systems

Іnfrachervoni ІЧ attachment

Pobutovі vimikachi with remote control, scho pratsyut іz zastosuvannyam ik vіpromіnyuvannya, v_dryznyayutsya such constructive features:

• Kerovanie remotely vimikachi are installed in the line of expansion, to live the lance of illumination;
• As such, as a rule, standard modules of the BM8049M type or similar schemes are used;
• To control this robot, you can use different remote controls for TV receivers of the same brands (the option is given to be included in the instructions for this device).

If you need to turn on the lighting on the receiving-switching unit, the remote control panel will be activated, and then the command to memorize this function will be sent to the pressure of the especially visible button.

Upon acceptance and decryption of the request, it will be recorded in the memory of the vikonavchogo annex, after which it is possible to control the switched on light through the call channel, after standing directly from the remote control (marvel at the little ones below).

Korisne respect. The main shortfall of systems with vipprominuvannyam is the need for an accurate pointing of the remote control at the receiver, the shards of the system function only in the range of line of sight.

Dodamo up to this small distance of viprominuvach, zbіshiti yaku for an hour go into the trouble of installing expensive repeaters.

To control over the radio channel

It is more convenient and practical to vikoristovuvaty vimikach with remote control, which works in the range of radio transmission, which are transmitted from the remote control to the receiver with the wake-up controller.

The choice of a radio channel for the management of modern light possessions is richer with such mirkuvan:

• It is possible to use the lighting switching system not only for MPC, but also from a personal computer, tablet, mobile phone and other similar electronic devices;
• In this case, the radius of the radio channel is more likely to be reached for a daily shift of 100 meters (15-25 meters for each presence);
• In this situation, it is allowed to install special signals on the receiving side.

Get respect! For control systems on infrared exchanges, which are used in the high-frequency range, it will be uneconomical to turn on the boosters for remote lighting.

The control system of the air traffic control over the radio channel consists of the following main parts:

• Portable remote control;
• Life battery;
• Control inspectors (wimikachi), who enter the warehouse of the vikonavchy module (which, at its own pace, integrates with the delivery line).

The terminal module with the controller, as a rule, is mounted directly in the chandelier box, in a nearby pink box or in a plastic socket box (see the photo below).

Because of this distribution, the part of the system appears superficially attached to third-party eyes and does not disturb the order of installation wiring in the enclosed space of the room.

Overview of remote vmikachiv

Among the most popular models on the market, the most visible is the remote light switch of the Sapfir-2503 type, which is produced in Belarus, and the system with a radio-carrying channel of the Nootechnika Noolight brand. You can see the list of the first companies in the photo below.

Another type of wireless vimikachiv and an attachment for switching lighting control over a radio channel is produced by such a vibrator as the CoCo company. Before them, we can see such wider models as AWST-8800, AWST-8801, as well as the portable key fob "CoCo" AKCT-510 and the transmitter AWMT-230, which will come up.

Models of two other types of remote control systems are practical and efficient, the lower ones are similar to them with signal transmission over an IC channel. With their help, one hour at a time, one hour cherubate all the illuminating possessions at the booth practically from any point (from the most distant rooms). The presence of a set of accessories for special dimmers expands the system's capabilities and allows you to control the illumination of internal spaces.

Transitional control panels, which enter to their warehouse, allow the choice of whichever scenario is to be used, which will lead to the connection of the light. More "slip through" the streaks in the face of the looked at virobniki can take revenge at your warehouse with a special RGB controller, the building to improve the quality of the low operation, and itself:

• Turn on the lighting for the given address, or just at the whole booth;
• regulate the brightness of the light of lamps;
• Depending on the set program, it is necessary to set the need for the spiving of different colors with light illumination from their last enumeration.

Zavdyaki dosit compact dimensions of the electronic part of their attachments, a remote jumper is allowed to be placed in the middle of the bottle of a chandelier or a lamp. If you are watching from the yoga remote, you will be able to switch over the radio channel from a distance of approximately 30 meters.

Most of the sights of keruyuchih building systems are treated with buttock dampers, rozrakhovanimi for pressure up to 3.5 kW. For their independent connection, it is necessary to perform the following operations:

• On the back of the head, the focus is chosen with the attachment for this I will attach a working tension;
• After that, the starting machine automatically removes the voltage from the booth of the apartment;
• At the final stage of work, a power bloc, which is more powerful than the light, is being established at the opening of the line of life.

You can find out about the details of the connection of the terminal vikonavchoy annex at the offensive branch.

The order of independent connection

Works from the installation of the primal outbuilding on the edge of the radio channel are to be carried out by a qualified specialist or a qualified specialist, who has mastered the basics of electrical engineering and electronics.

Important! Before that, how to connect a vikonavchiy module at the opening of the line of life, in the first place, it is necessary to go after the help of an auxiliary zakhis automatic machine.

It is also significant that the order of insertion into the line in which case is sometimes changed in the traditional way of inclusion. On the right, in the fact that only a phase wire is brought up to the sonic keyboard, at the opening of which the mechanism itself is connected.

In order to work the correct module of the system with remote control, it is necessary to bring not only the phase, but also the ground or the zero wire. Only for such a water supply, the building will be able to cope with its own functions. In this order, first install a remote jumper, it’s important to reconnect with the wires (including the conductors that go to the destination).

Get respect! Under the concept of “advantage” in this situation, there may be some kind of lighting fixture (fluorescent lamp, lamp, room chandelier or a complex of lighting fixtures).

With a large number of okremikh navantage, which are connected to the keruyuchoy system, the phase wire of the skin is wound up on the external terminal of the vikonavchy module.

In case of any divorce, it is possible to confirm the scheme, pointing to the little one below.

After completion of independent installation (before applying 220 Volt voltage to the life line), it is recommended to re-check the electrical circuit and reconnect at the reliability of all working contacts.

Nasamkinets is significant, that remote victories are more and more often vicory in the field of lighting systems for modern living quarters and offices. Designs of a distinguished class, with their secret placement, create a comfortable mind for lighting with light at the booth, and also give the possibility of a combined lighting fixture on the basis of colored light-colored lines.

Video

The whole world is progressively pragmatic without darts technologies. We are no longer ruled by the sound buttons and vimikachi, even if they need to be drawn to them, but most often we should get up from the sofa. For example, how can you bring your own, for example, remote Wi-Fi lights? Tsya small "stray" to allow cheruvati chandelier directly from the smartphone chi through the remote control! To go out, you can finish reading a book and turn up the light immediately, so that you fall into a dream - it’s not necessary to get up for someone. You only have to think about calling yourself a phone, without continuing your swearing.

Yakі buvayut vimikachi z remote cheruvannyam

You can buy a chandelier with a remote control from the best shops for a long time. It is important to respect a lot of people that it is possible to take away the possibility of remote cherubing with light only in this way. They don’t suspect about those who at once use light bulbs with the possibility of their inclusion, that they can use Bluetooth or Wi-Fi, about which we can tell in the state. Vtіm, you can do without them. At the same time, special bezdrotovі remote vimikaci. It’s a pity, at the best Russian stores they rarely sell them. Prote nіhto not zaboronyaє skoristatisya servants. And if you don’t bother yourself with jokes, read this article - lower all the necessary messages.

Remote vimikach light with a special unit. Wine may belong to up to two modifications:

• Zovnishniy vimikach Wi-Fi - is installed on the place of the great vimikacha. Replace the traditional keys with a touch button.
• Internal block - for this installation, you will need to remove a chandelier, which will require access to the arrows in the middle of the steel. Prote with such an extension can be continued with a traditional keyboard vimikach. If the axis is just as bright as you can help yourself, then the addition of a smartphone will appear marnim, even if the electrician is not allowed to reach the internal unit.

Before speech, it’s not necessary for the vimikachs to interact with the help of a smartphone. In various online stores, you can easily find the kits that include the remote control. It’s better to navite better. However, do not forget to reconsider that there is another trim for the remote control in the kit, which you can attach to the wall with a traditional vimikach.

The best calling distance vimikaci

SONOFF T1 Gang

The products, which are being developed under the SONOFF brand, serve to create something that doesn't even want to be like it. In the article about smart light bulbs, we mentioned one of the company's products. Now it's time to talk about T1 1 Gang. Tse remote vimikach light that can have a Wi-Fi module in his warehouse. It is not possible to open the contacts of the wires to you (if you want to live the psychic module), then there are no traditional keys here. Then there is a sensory Maidanchik. Tse means that you can brighten up the light with a simple dot of your finger.

As if you are talking about remote control, it is implemented here in two ways. The first step is to choose a smartphone based on Android and iOS, where you can install special add-ons. So you can not only turn on that vimikati light, but also create a timer or start a full layout. Tsіkavo, scho access to the program can be a voice helper from Amazon. I’m tired of blowing my Russian wine, so far I can’t speak. Another way to control is using a traditional remote control, which operates at a frequency of 433 MHz (you can buy yoga from various stores that sell light equipment).

Vimikach Building Vitrimati Navantage 400 W. Come out, that the chandelier is not to blame for the mother of light bulbs - the lamps are lit. I give respect to those who have different visions of vimikaciv - stench is considered by the number of contacts (the number of touch keys). Varity of such an accessory is not available, there is approximately 1,500 rubles in stock.

ALFA ABK-3

There is only one real mic that can connect to a Wi-Fi router. The model itself has three touch buttons, but there are also variations with a smaller number. In fact, the accessory is a copy of a viscerally looked model. Vіdminnіst polagaє in the fact that the vimikach zabarvleniy in black colors, and the keys are placed not in a row, but in a stack. About a stable connection to Wi-Fi, it also signals an active icon. Also, the virobnik virіshiv robiti the design of its virob troché original, after which the region was slanted in black color.

As it suits, all the buttons are switched on here. You can boldly affirm that you definitely won’t miss the next one to wind them up at the top of the darkness. Virib zdatny vitrimati transmission of electricity to the exhaustion up to 600 watts. The case of vimicach is fireproof, so you can't help but be quiet.

As a rule, it is possible to carry out light after the installation of such a vimicach with the help of a smartphone. Offenses to the most popular operating systems are supported, and the functionality of the programs is not included in the light. Oscilki here win Wi-Fi, start a timer, or else you can find it for hundreds of kilometers from a remote vimikacha. This model also supports voice assistants for smart speakers from the Google Home and Amazon Alexa series. Skoda, you still can’t understand the Russian language of the stench.

Yasmart T1W

And tse is a single-channel vimikach. The wine is also touch sensitive, most of the body is made in a white color. The Wi-Fi indicator is located above the touch key.

Perhaps, he is one of those who have found vimikaciv іz remote care. Yogo can be bought in Ukrainian online stores that sell smart electronics for about 1200 rubles. Under any circumstance, you may not be surprised by your dear counterparts! Here you can find the support of Amazon Alexa and Google Home implemented, which allows you to use voice commands for the obviousness of the outbuildings.

This accessory can be installed on the smartphone using the Yasmart program. At the new one, you can implement the layout of the increase and the inclusion of the light, as well as set the timer with the turn signal. Of course, a few vimics can be grouped - they allow you to turn on the light at the whole booth by pressing one button.

On the vіdmіnu vіd vіd vіd vіd vіd vіd vіd vіdnіh vіd vіdnіv іv tsey vіmіkach vіmіkаі zdatny vіtrimatі elektriku puzhnіstyu 1800 watts. This is a miracle novelty for those who call not to save electricity and will to win a majestic chandelier with a great number of lamps.

ZDK ZW-2

Another true vimikach, the greater body of which is made into a white color. Like analogs of yoga, black smug, which was spread in the center. It itself has two touch buttons. The stench is easily smeared in the dark, so the keys are lit by light indicators. To the dartless tether, the vimikach is connected as standard - Wi-Fi. It is easy to appreciate the presence here of any indicator that signals about a stable connection to the border. Ale, maybe wine is not needed? It is not included that someone is only interested in wine.

I will build a housing made of flame-retardant ABS plastic. Front panel may be hardened folded. Maybe, through the new version itself, it’s more expensive. It is not for the leather baggers of our country to dare to spend over two thousand rubles on such an accessory!

To control the volume, you can switch between a smartphone or a tablet based on two of the most popular mobile operating systems. The program was supposed to be functional - it is not surrounded by light. Tim is not smaller, and it is impossible to propagate a wonderful program.

eWelink Light Touch Smart

Tsey smart wimikach Wi-Fi is not officially delivered to the territory of Russia. Prote can easily come to the aid of the popular Chinese trading maidans. Here you can know some of the versions of yoga. First, you can choose the number of touch keys - from one to three. I’ll build the most vіd tsogo the strongest to lie down. Although a single-key vimikach costs only 890 rubles, then the version with three touch keys will cost 150-200 rubles more. In a different way, buyers choose colors. The traditional vimikachi can be more zabarvlennya ozvnіshnyoї parts of the body. Also, use options from black and golden colors to the body.

In the middle of this vimikach vikoristovuetsya splendid black plastic. Connecting wires is as simple as possible, the stench is squeezed in by traditional bolts. The front panel of the vimikacha looks as simple as possible - a touch key, which is placed on the aluminum case, is seen by the surroundings, as it is guilty of light. Connection to the router is required for additional Wi-Fi. As far as safety, then the remote vimikach vitrimaє strum with a power of 10A.

The best internal Wi-Fi

SONOFF RF

The controllable indoor unit, which is sold for a small penny, is supplied with a special key fob, which plays the role of a remote control. Look out, but sometimes it’s better to be rich with the remote control, go down to the next supplement. However, it is still impossible not to know that the program is more functional for a smartphone. Regardless of the presence on the remote control, just a few keys, for their help, do not set the timer for dimming the light.

Just think, the volume can be regulated not only by lighting. Theoretically, you can place yoga in the middle of the wall, or here at the electrical panel. One word, so you can regulate the supply of electricity to any outlet. Deyakі miltsі such a rank to manage electric heating, including yoga before it, like drinking from work at home. The maximum vimikach vitrimuє strum with a power of 10 A and an intensity of 2200 W.

Turning to the remote control, you may cry out, and the signals are overpowered at a frequency of 433 MHz. Surely, on the great day of the wines, we do not work. For that, you will need to connect to Wi-Fi - in any case, the vimikach will learn to accept commands to navigate from another country. It should be noted that the eWeLink program is Russian, that it is necessary to master the functionality of navigating a summer person. It also supports the ugly Amazon AWS platform, which allows voice commands to be given to voice commands by the speakers. Significantly and the possibility of joining a number of vimikachiv in a group.

SONOFF 4CH - 4-channel vimicac with remote cuing

Tsey vnutrishnіy vimikach razrakhovaniya for podklyuchennya chotireoh kanalіv. Tse means that with this help you can implement the inclusion of one, two, three and a couple of light bulbs near the chandelier, which is to say rudely. Otherwise, you can add a chandelier and three sockets to the block. In a word, everything is less than your imagination! I lively minds, well.

The building block vitrimati electrician up to 3500 watts. You can connect to your home network for additional Wi-Fi. Like other wireless lights, the SONOFF 4CH robot is regulated by the help of a mobile add-on, rozroblenno for Android and iOS. With someone else, you can work out how to win, so, for example, I’ll make a layout for the work and build it. And do not forget that this accessory needs to be connected to the router, so you can deal with it from any point of the world - it is absolutely not obligatory to change the order from vimikachem.

The body of the virobu is made from flame retardant ABS plastic. On the new one, open a special box that allows you to place the vimikach on DIN rails.

SONOFF S10A

Found vimikach, which is located under the wall or in the electrical panel, and with it, connects to Wi-Fi. Russian online stores sell yoga for only 650 rubles or a little more. However, the simplest accessory is ours. There is no talk about everyday chotiri channels here - you can connect only one chandelier or an outlet to vimikach. The body of the virobu is made of non-combustible plastic. On the new one, you can display a single button, so after installation it is necessary to take it out for 20 seconds - if you can, you can connect to the microphone for the help of your smartphone, so that you can move it away from the installation. At the auxiliary addon, you can not only turn on the electricity, but also set special algorithms for the work of the light or sockets.

Maybe, tse indiscretions are chosen for those who are not yet ready to spend a lot of money on such an accessory. Ale, it is recommended not to come to such a switch socket, to which the power and other electrical appliances come in with a great strain.

QIACHIP - wimicach with remote control

Understandably, not all internal remote controls are supplied to Russian stores. There are a lot of options available for purchase only for the help of AliExpress. For example, in this rank, you can join QIACHIP vimikach. For other similar extensions, it can be supplied together with a compact remote control, which operates at a frequency of 433 MHz. You can compare it with the key fob in the form of car alarms. On the body of the miniature remote control, only two buttons and a light were placed. Want more? It is necessary to use a program to get started on a smartphone or a tablet. There are two versions - for iOS and Android. For a new one, you can activate the timer of the vimknennya, as well as adjust the layout of the robot and add it.

Tsey vimikach has a plastic case. Virobnik zapevnyaє, scho yogo vitvir vitrimaє elektriku puzhnіstyu 2200 W. However, we would not want to take such an inexpensive accessory very seriously. A socket with a pryska connected to it, winding it with a low pressure - it’s already too late.

Broadlink SC1

The simplest distance vimikach, which only one can use. The wine has a plastic case, from the sides of which there are loops for screws. There is a light in the front, which instantly plays the role of a button - it signals about the connection to Wi-Fi. It's amazing, but here a two-channel approach is implemented. So that the koristuvach will be able to control two sockets in a row, or such a large number of lighting fixtures.

Virobnik write, scho yogo remote vimikach building vitrimati electric jet pressure 2500 watts. Well, we do not recommend you to change the hardness in practice - soft plastic may not be exposed to strong heating. And the axis of a stable Wi-Fi robot can be no doubt. Use the program manually, both on Android and on iPhone.

Visnovok

Now you know about those, which are the best Wi-Fi remote lights. Do not forget that when you connect to the chandelier, you will be on the right side of the electrical wiring. If you are not convinced by your knowledge and memory, then it’s better to call an electrician - you can definitely install the wines as accurately and safely as possible.

High-tech outbuildings are more and more often vicorated when cladding a dwelling. Lighting automation can be achieved, as a result of setting a remote switch (DV) from the remote control.

Increasing the lighting of your booth from the remote control

Principle dії

As a remote control (DU) regulation of lighting in electrical installations, it is due to the introduction of specializations to receive a signal that is sent from the control panel. The management of the light is more important than the vikoristovuetsya іnfrachervone and radiokhvilov.

Infrachervone keruvannya

Light fixtures are also manipulated for additional IC-change. For which in the opening of the lance of lighting, connect the block of keruvannya. It's not easy to work with your own hands. D_ya vykonuєtsya remote control cheruvannya vіd svіchay tv_zor. Yogo point at the block, pressing on the key, as if not victorious for switching channels. With this, a command is recorded for a riddle, after which it is possible to twist with light by pressing the button.

Not a lot of way of remote control with IC-promenevim management is in the fact that it is necessary to ensure direct visibility and to a small distance. On fig. 2 shows the operation of the air conditioner from the IC remote control.

Controlling the air conditioner from the remote control, like a mobile phone

Radio control department

Radio signal management - expand more, lower for additional IC. Here they are transmitted from the remote control to the controller, adjusted to a given radio frequency. Exchange of commands to go through for additional special codes. Reliability is taken care of for the timing of the creation of the necessary equal signals and the repetition of their sequence of sprat times. The range of remote control panels is up to 100 m and more. So that the lighting did not work to transfer the susidies to the booth, the skin of the remote vimikach lighted up its unique address. Therefore, the receivers of the signals receive the commands of the vikonannya quietly chi іnshih dіy only from your remote control.

There is a button on the radio mimics, which allows you to turn on the DC and manually turn on the light. In addition, on the new one, there is still a button for a joke, by pressing it, you can reveal the location of the remote control with an audible signal.

Light can also be treated with a smartphone or a computer. For whom special programs are involved in them and special commands are created. You can do everything with your own hands.

The outbuildings are connected according to the commutation pressure, which reaches a few kilowatts. Vimikaci remote keruvannya can work on okremі lamps, as well as on the whole complex. The most important option is to control from the central remote control with several groups of lamps. The controllers can be energy-independent in the form of devices and can be used in the form of accumulators or batteries.

Attachments with dimmers are not used with fluorescent lamps, where changing the voltage of the power supply is not allowed. It is possible to zastosuvannya only lamps rozzharyuvannya and halogen ones.

Perevagi Far East

1. Vikoristan's sharpness.
2. Simplicity of a vlasnoruch connection. Replacing the sound vimikacha we will add a remote control over the radio or ІCh-change we will simplify the installation.
3. Functionality. You can choose an extension with lighting control and special programs.
4. Possibility of working models from a large number of channels. The presence of a few vimikaci is not needed. Zvichayne vymknennya that ukvіmknennya can be withdrawn, if there is a need to do it manually.

On the open air from the remote control, you can turn on the lighting on a larger window (100 m). There is no need to go to the end of the garden plot, sob to connect the lighter or the light source. There is no need to carry out folding installation and electrical wiring. Sufficiently replace the svіchaynі standard vimikаі on radio-ceramic remote control and work clumsily adjusting with your own hands following the instructions. More powerful water pump type can be turned on directly from the booth, for example, for watering a plot or filling a storage tank.

Virobniki

Outbuildings with remote keruvannya are characterized by great diversity.

Meister Kit MK343 and MK344

Two-channel radio mimic MK343 serve for remote switching of two independent channels of 300 W leather pressure. For the presence of radiators in the power unit, the maximum intensity of the drive is 1000 watts. The control is carried out by a key fob-transferring from the chotirma with buttons.

MK344 to carry out smooth switching on and switching on of lighting through two channels. For which there are 4 buttons on the remote control. With one pair you can turn on the voltage, and with another - you can adjust the brightness of the lamps or the voltage on electrical appliances, for example, electric heaters or fans.

Models by Wookee

Dial from the remote control and receive signals can be used with inputs of 200-500 W for 1-6 channels with okremikachami for skin control. The apartment has an extension of 20-30 m.

Remote vimikach with remote control

Products of the firm "Nootechnika"

The Belarusian company produces vimikachi "Sapfir" from the House of Culture for the help of IC-promenade. Until then, the stench can damage the function of turning the light of the lamps (revenge the dimmers), and also save the rest of the parameters. Not much is the weak sensitivity of sensory care.

Vimikach light Sapfir-2503 with remote IC-treatment

The management of the ІЧ-change is important, so that you can accurately direct to the receiver, which is not easy. And yet this way zastosovuetsya at all televisions, and people until the new zvikli. In addition, the infrared remote control of the TV can be adjusted to control the switching of the light and thereby expand its functionality.

The Nootechnica Noolight system is radio-certified, it is richly efficient, there is one remote switch with IC control. Vaughn allows you to cherubate all illuminated houses from any place. Dimming blocks give the possibility of adjusting the brightness of the lamps. You can install different scenarios of the robotic system on the remote control. In order not to forget the lamps in the premises, you can turn on the voltage at once, which is supplied to the lighting of all the apartments.

A more foldable system is to replace a richly functional RGB controller, which ensures the increase in lighting, the change of brightness of the lamps, as well as the spіvіdnostnâ kolorіv svіtlodіodnih strіchok z їх enumeration.

Radiomics SOSO

The compact design of the scheme for lighting the lighting allows you to place it in the largest chandelier cartridge, where the light bulb is screwed. Attach a switch from the radio control panel to a distance of up to 30 m. There is no need to connect and lay wires.

Socle chuck from remote included

The company produces small-sized wire-free vimics, which can be placed behind a wired vimikachem or a socket in a mounting box. The stench can be used to reduce the exhaustion of up to 3.5 kW.

The power block is mounted like this:

• choose the focus of the vagueness;
• turn on the life of the fence;
• install a force block like a great vimikach;
• turn on the phase, neutral and vanishing to the block;
• activate the signal storage mode by pressing the exit button;
• give a signal from the remote control, which is remembered by the receiver, having checked the signal of the light source, which may blink the lights.

Installation of COCO ACM-1000 radio mimic at the mounting box socket

The brown wire of the phase wire through the terminal block is connected to the terminal (L) of the power unit, and the neutral is connected to the terminal (N). Then the socket is connected to the outer terminals (N) and (L) of the block. Now you can supply power to the socket from the remote control, and before it, connect the electrical attachment.

Vimikachi ta Jung sockets

The Jung company produces electrical products in a range of styles for high quality. Radio-kernels around the building and systems allow you to significantly improve your comfort.

There is hope for the possibility of illuminating the middle of that call of the booth, with single lamps of those groups for additional remote control of keruvannya.

A great choice of materials from a wide range of zastosuvannya prizvіv to the need of razbittya models on the series:

• steel and aluminum of strict forms and with a characteristic glare;
• black polished surface in "anthracite" style;
• cheap plastic options;
• with acrylic and colorful slope;
• from the defense of vіd vologi.

Remote control. Video

Video rozpovіdє pro zruchny variant of remote keruvannya lighting.

A remote relay for additional radio signals or an IF exchange from the remote control is practical, modern and handy at the booth. The systems of smooth switching on and regulation of lightness on the windows give the possibility of changing the comfort of the dwelling and continuing the term of lamp service. We especially commemorate at the great kіmnats that for the obviousness of the garden plot.

The control system for lighting near the kіlkoh kіmnatah, placed in a small box, stacks of handy flooring, which, when it's time for the hour, out of tune, commemorates and manages great unhandedness.

CONTROLS - SETS

Under remote control lighting, such switching schemes for lighting fixtures are tossed about, for example, they are equipped with a contactless path with a variety of dart-free technologies.

Systems of remote lighting have been installed for a long time for commutation of both outdoor street lighting, and indoor and outdoor lighting, as well as indoor lighting. Іnuє to finish a wide range of such outbuildings.

According to the type of technology, vimics with remote care can be introduced up to one of the following types:

• acoustic, which react to sound vibrations;
• optical, which should be used under the influx of light ventilation;
• radio stations, in which the control signal is transmitted for an additional radio signal;
• vimikachi light, equipped with roo-sensors;
• іntelektualnі vimikaі, yakі zdatnі recognize voice commands.

At the heart of the principle of robotic acoustic vimikacha lighting with remote control is the use of an electronic acoustic relay, which specifically turns on the light when fixing the sound signal of singing tightness. Like a sensor, there is a miniature microphone.

The relay is equipped with a sensitivity regulator, which ensures that the sound is equal to the sound that is being restored. Like vikonavchі organi relays, scho intermittently commute illuminating accessories, can switch non-contact electronic accessories, or primary electromagnetic relays with mechanical contacts.

The switching on of the lighting lamps is activated at the hour of receiving a repeated sound impulse. As an option, the device can be equipped with a time relay, which turns on the light through setting on a special scale for an hour. At such a vikonannі pristriy it is possible to vicorate for the illumination of passing places (corridors, pіd'їzdіv іn.).

Zastosuvannya acoustic relays are intermingled with non-handling of their victories, we will be able to build up the building to protect for any third-party noise (low vibrancy).

Optical lighting systems and the inclusion of lighting can be included in up to one of two categories:

• vimikachі, scho to spratsovuyt when vplivі on them vipromіnyuvannya svіtla visible range;
• remote switching systems of light and other vanishing, which vikoristovuyut іnfrachervone (ІЧ) viprominuvannya.

Vimikaci of the first type lie before the automatic outbuildings. The stench vikoristovuyutsya for the inclusion of that inclusion of street lighting near the places. I will make the basis of the photorelay, which reacts to the sleepy light. As a light intensity sensor, use a photodiod at the relay.

During the current day, if the lightness threshold falls below the installed boundary, the relay is activated, switching on the electromagnetic starters of the sound lighting. When the sun descends and reaches the threshold of the intensity of the daylight, the relay turns, turning on the street lamps.

VIMICACHI WITH REMOTE CONTROL

Infrared vimikaci lights with a remote control panel vikoristovuyutsya important for switching lighting in the middle of the apartment. Before the warehouse of such a system, there are two fittings: a transmitter and a receiver.

The most common way to use a traditional keyboard vimikacha at home is light, and transmitting an IC signal to serve as a remote control for light fixtures. The breadth of such a configuration is explained by the fact that a set of remote lighting lighting on ІЧ exchanges should be installed before the main wiring diagram.

It is also necessary to configure the system with various infrared changes, when receiving and transmitting a signal, it will be placed in one case on the keyboard space of the light switch. In order to turn on the light in this mood, it is necessary to bring a hand to the vimikach, otherwise it is an object. When you receive a signal, you receive a transmission signal.

Not a lot of systems from various infrared exchanges is a small area for transmitting, which is surrounded by literally a few meters for a sizable remote control.

Of course, for a successful robotic receiver and transmitter of duties, it is necessary to move in the line-of-sight zone, so as an infrared change it’s nasty to cross over.

The radio monitoring of the system of remote switching on and the switching on of lighting is also to take care of the receiver and transmitters, but also to carry in the air, which controls, here to serve as a radio control.

Like in the case of infrared systems, the radio transmitter sounds in the remote control, and the receiver - in the space of the keyboard player.

Expand that other ways of placement, if the receiver is mounted near the chandelier.

The transmitter can be played in the remote control, and in the form factor of a great keyboard player. Such an attachment, for the help of double-sided adhesive tape, can be attached to any handy worker, on the wall or on the furniture.

The priming block, which is included in the set of remote light control, also includes a controller with auxiliary attachments (often with powerful electromechanical relays). Quite often controllers make a sprinkling of channels, which allows you to turn on the light from the remote control panel, switching the skin lamp of the chandelier okremo.

With the help of a single remote control, it is possible to change the sound of a dekilkoh dzherel light. Moreover, radio-ceramic kits can be used to open and close window blinds with an electric drive, robots and electric mechanisms for controlling gates, doors and winders, fans, air conditioners and other electric appliances.

Before the transition of the remote switches with the radio stations, the radio can be stepped forward:

• the range of remote control is significant, which reaches 100 meters;
• zdatnіst radiohvil oginati pereshkoda and go through the crisis of the wall.

One more kind of automatic control of illumination is used by various sensors in the hand, similar to those of stasis in signaling systems. The sensors themselves, according to the principle of dii, can be different:

• ultrasonic;
• infrachervonymy;
• radio frequency.

As soon as the photorelay stops, the process of lighting up the light starts again in automatic mode. Attachments of this type can finish off the sphere of stagnation - lighting the place or the territory of the territory for the hour of the presence of people there. Such systems are even more effective for switching on - switching on the light in the entrances, on the exits of the maydanchiks, lighting the entrance to the booth.

Dekіlka sіv pro іbіlsh іntelektualnі systems, yakі ymovіrno become the basis of sensible booth of the future. Go about the outbuildings, buildings, recognize and win different teams, which are voiced by the voice of the ruler.

The systems of which to revenge the analyzers of human promotion. In memory, I will add different commands in front of me, as they are saved as a spectrum of sound frequencies. In whom play the role of individual voice, timbre, intonation. At the process of the robotic system, a voice command is received to analyze, the spectrum of sound frequencies is identified with commands that are saved in memory, and zbіgu z odnієї їх, vіdbuvaєtsya vykonannya sing action.

LIGHT REMOTE CONTROL KIT

As a butt, we can look at a typical set of assignments for remote lighting from the remote control. The Uniel UCH-P001 kit contains the following components:

• priymach to a radio signal, confusion with the controller and vykonavchimi relays;
• remote control for light control from the transmitter;
• special console holder, which can be fastened to a handy handpiece with double-sided tape or screws;
• live element for remote control;
• instructions for installation and operation.

1. This electrician with a remote control panel may have the following technical characteristics:

2. There are two channels of control, so that it is possible to independently control two electrical appliances, or groups of electrical appliances, behind the help of the remote control.

How to create distance care for lighting

The maximum voltage of the skin channel should be 1000 watts, the maximum intensity of the voltage should be 2000 watts.

4. The radius of the remote control should be 30 meters.

5. Dimensions of the priming unit, controller and relay relays - 90x45x22 mm. The compact size of the block allows you to easily hide it behind the decorative elements of interior decoration or place the middle of the chandelier.

6. Trio equipment remote control with buttons - "1", "2" and "3". For the help of buttons "1" and "2" the switch is switched on and the electrical appliances of the 1st and 2nd channels are switched off, the button "3" of the remote control switches the switching of both channels at once.

You can find a description of the number of modules for lighting up here.

GOLOVNA CCTV ACS OPS ITS STATTI

SMART HOUSE - LIGHTING MANAGEMENT

REMOTE - VULICHNE - ANNEX AND MODULES

Electricity consumption for lighting a house, street, industrial facility can be reduced by 30-40%, thus optimizing the work of lighting fixtures. The exact appearance of the visibility and intensity of the day light, the importance of people in the accommodation is available for the help of a drotoless lighting control system (LMS).

Such a system will bring you maximum comfort for employees with the possibility of significant savings in electricity and can include the following functions:

• care for additional sensors in the movement (switched on when the movement is detected);
• keruvannya with all the lights of light behind the back of the created algorithm (for example, when the TV is turned on);
• keruvannya through infrared or radio remote control;
• raising / turning off the lamps for the timer (for the layout);
• imitating the presence of the rulers, i.e., creating the effect of the presence at the people's homes;
• keruvannya on the great vіdstanі through the GSM channel for the help of a computer or telephone.

REMOTE CONTROL FOR LIGHTING

Remote control and regulation of lighting in the house or the apartment sound is secured by one of two methods:

1. For the help of radio or infrared (IC) remote control (RC), as well as for the help of voice (sound) help for an hour of rebuking at the reception or in the middle distance to the new one.

Radio remotes.

It is possible to carry out the illumination of a house with a dzherelom in a booth, by installing one radio remote control for the doors, and another, for example, for a bed. Radio remotes, depending on their technical characteristics, are rated for functionality, good looks and range (10-100 m).

The simplest single-channel remote control switches on and off one lamp. Bagatocanal pratsyyut in some areas and nalashtovuyutsya okremo for the skin power unit. When roaming the receiver, that transmission at different rooms should be checked, that the radio signal attenuation is reduced in the process of passing crossovers on that wall, so that the repeaters can be deleted.

infrared remote control vikoristovuyut at small places outside the square.

This is due to the head shortcomings - the need for accurate targeting will be attached to the receiver signal, to that it works only in the boundaries of the line of sight of the light and may have a small range of change.

One of the main advantages of the system with a remote control infrared remote control is those that with this help you can help not only the lighting of a "smart" booth, but also a TV, home cinema, ventilation, singed that in.

Here the main advantage is the simplicity of management and the need to follow it, where the remote control is located, so that the wines of this system are not transferable. The short ones are those who often, if any noise can be increased or dimmed by illumination.

To that, in order to incapacitate the vibrational spratsovuvannya, most of the current voice transitions should be equipped with a tonal system of differentiation of signals. However, such relays require a strong and competent attitude.

Another small amount of such devices is that they can only be victorious with luminaires, that they are connected to an outlet, so the stench is handy for raising/unplugging floor lamps, floor lamps too thin.

2. Management through the GSM channel on large stations.

The building of the control system for lighting and accepting commands, whatever it is, is a smut, now it is recognized as GSM control. Installation of such a system allows you to create a dialogue between the spymaster's house and reasonable powers (GSM module). The principle is based on the fact that in the middle of the lamps there is a GSM module and an electronic board, on which there are sockets for a SIM card.

The transfer of information is dependent on the help of short calls or on the strength of SMS alerts. The installation of such a system itself is relevant for those who often forget the vimikati light in a booth, to wind it up for a good hour.

AUTOMATIC STREET LIGHT CONTROL

The management of street lighting in a significant world is more relevant for public utilities and for private (zamist) houses. The main management methods are implemented:

Zastosuvannya sensory v ruhu.

The main function of the sensor in motion is to remotely monitor street lighting, and automatically turn on / turn off the light when it appears. For the way of designing the rush, I will add it to:

• infrachervoni;
• ultrasonic;
• microfluvial;
• combinations.

The principle of їhnyoї roboti is simple.

Light control from the remote control at the apartment

When an attachment of an object appears in the sensitivity zone, which is collapsing, it additionally indicates the level of illumination and, as it is low (the parameters are set during installation), then the sensor is activated and turns on the illumination attachment. Transmission of a separate control signal can be carried out by a radio channel.

Wikoristannya photorelay.

Attachment vmikaє and vimikaє light, reacting to the change of natural light. Theoretically, the LMS, in which the photorelay is stagnant, can clearly react to the weather, for example, working earlier on gloomy days.

However, practice shows that there are a lot of third-party factors: a significant change in the temperature again, the sensor’s confusion is too thin, which negatively affects the functioning of the fixture. At zv'yazku zchim yogo spratsovuvannya may be incorrect.

For help remote control.

If you are connected to such a remote control, you can additionally connect sensors to the floor, security lighting, etc. The main functions of the radio remote control include two elements: the remote control is a command attachment and an RGB controller, or a power unit (radio dimmer, radio relay) is a control attachment.

Larger folding systems are based on WiFi technology, and are equipped with a timer, additional sensors, and photocells.

The management of the auxiliary radio channel is controlled by a way of strengthening the signal from the MPC to the controller. The broadcast of the radio channel remote control helps the visibility of the obov'yazkovoї wimogy to the point where the illuminating attachment is in the visibility zone. However, the possession of a serious water - I mean, it’s equal to ІCH management, vartist.

MODULES AND FEATURES FOR LIGHT CONTROL

The most popular are the following sets of OMS:

• Belarusian system NooLite;
• Polish Zamel.

The range of possession allows the transmission of signals from the light tower to a distance of up to 300 meters.

Radio-ceramic equipped with NooLite.

The installation of NooLite vikoristovuetsya for the creation of a system of remote keruvannya lighting "intelligent" booth. The system includes a set of attachments, such as remote controls, power units and vimikach, which allows lighting without a remote control.

The kit may also include:

• ruhu sensor PM111;
• moisture and temperature sensor PT111;
• ethernet gateway PR1132.

The PR1132 gateway can be connected to a switch or a wireless router, which allows you to switch on / off the device for an auxiliary phone or a computer. The advantage of NooLite is the ability to expand the kit.

SU Zamel for lighting a "reasonable" booth.

The set of the popular Zamel equipment includes: push-button 4-channel radio transmitter RNK-04 and 2-channel radio receiver model ROP-02, which you will need.

Such a primach can be mounted at the wall or attached to the eye, and also be placed directly at the body of the lamp.

ROP-02 building pratsyuvati in 5 modes: inactive, on, monostable, stably and timed modes.

Functional features of the Zamel droneless system:

• the possibility of cherishing illuminating possessions, as well as other tricks;
• operation of 2 output relays (potentialless contact for 230 V);
• range up to 200 m with the possibility of increasing with the installed retransmitter RTN-01;
• visibility of optical signaling;
• low energy savings.

© 2014-2018 р.р. All rights reserved.
The materials of the site may be solely aware of the nature of the site and cannot be judged as core and normative documents.

Remote vimikach light

All of them sounded to the splendid vibrations, as if they were working under the pressure of the button. Ale krіm tsikh traditsiynyh pristroїv, sogodnі for sale є th іnshі, suchasnіshі і progressive. The same vimikachi, like sensory, also equipped with an indicator, a dimmer or a light regulator. And one of the most successful є vimikach light with remote care. Let's take a look at its main characteristics.

Features of the remote vimikacha light

Such an attachment may have a great radius of air (up to 100 m), which allows it to be practical in any place near your apartment.

There are three types of such vimics:

1. Equipped with a roo sensor - the stench of vikoristovuyut infrared port. Such vimikachi will light up the light, if there is some kind of roc in the room.
2. Acoustic (with sound signals) - turn on, reacting to the programming sound (bavovna, the word is said loudly).

   Remote control of lighting from the remote control

   Spozhivachі v_dznachayut ts_ models as more practical.

3. From the remote control panel, the signal is sent to the radio signal, which is transmitted from the remote control to a special receiver.

The most progressive models will be able to see all three of them, and also react to the wave of the hand without any middle in front of the vimikach.

Advantages of remote vimikaci

The victoriousness of victoriousness of such vimikach is attacked:

• for the help of the remote control or voice control, you can turn up the light without getting up from the sofa;
• the installation is simple, the most remote switches are installed at home, without changing the wiring;
• remote lighting, as a rule, allow you to adjust the level of illumination, which is why the term of the lamp service is significantly continued;
• і, nareshti, the timer is already a basic function. It gives you the opportunity to program the inclusion of that light in the apartment during the tasks of the hour, which you can vicorate like an alarm clock, or to create a "presence effect" (the light is fading in and out, navit as you see it at the sight).

In a word, the remote vimikach does not only overcome its main function, but still can impersonal others, additional ones, to make its operation as comfortable as possible.

As for the peculiarities of connecting a remote vimikacha light, it’s worth laying it out depending on what kind of lamps the attachments will be compatible with. If the lights are fired up, then the connection will be similar to that, as the electric lights are connected. Energy-saving and light-emitting lamps have their own power - for example, they should be installed as close as possible to the very lighting fixture.

Having come home after an important day of work and having handily settled yourself in front of the TV set, or having taken care of your beloved right, you will guess that you have forgotten how bright it is. Oskelki get up molting, the remote control of the light comes to the rescue. Vіn zruchny at vikoristannі with regulation of light at the recipient. For example, you are sitting on the couch with a book in your hands and remember that the light is not enough for reading, you can solve this problem with the remote control in a few seconds.

This type of lighting is most vicorist in office and virobnicheskih premises, but with a glance of clarity, more and more widening of the wines is filled and life. The most popular for today are control systems, which can be controlled by an auxiliary motion sensor and a radio mimic. In addition, you can hack computers, smartphones and miniature controllers like Arduino or compact boards - for example, Raspberry Pi.

The advantages of modern technologies are those that you can look at with light not only, but by yourself in your own place, from the streets, or hundreds of thousands of kilometers from the house.

I will add the principle of work

Remote lighting with light from the remote control for additional regulatory processes and control parameters. Seemingly simpler, so that light can be used from any point of the apartment for an additional remote control, an extension is installed in the electrical wiring, which transmits a special radio signal.

For the help of new and special technologies, the lighting system is exchanged with a package of information data from the remote control. The package can include codes, if you vouch for that other team, stink, at your own pace, can be programmed by a specialist so, how will it be handy for the vlasnik.

In some cases, control problems can be blamed on a too large distance, in order to increase the reliability of signal transmission to the remote control, use the repeat function, for additional information that is controlled, it is transmitted regularly and successively a few times .

When buying a keruyuchy, I will build a follow-up care that the skin remote vimikach, when connected to the line, is given a system of unique address lines. It seems to be simpler, the radio transmitters of the signal are less likely to respond to those commands, as they were fixed at the hour of programming in the memory of the control system.

Advantages and shortcomings of the remote control

Lounging at your arsenal with a remote control, a person does not just ask his own life, but to make it comfortable.

Okrim headlines - management of light flows from great and small distances - є th іnshі, you can reach them:

In the case of the relatives of the same type, I will build nedolіkiv not so richly. Before them, you can add those that the price category of such remote control panels is high. Roke sensors, which can sometimes be pardoned through a reaction to sleepy changes, or warmer weather, maybe not add comfort in operation. As a rule, the remote control of the winding from the streets is victorious, the accuracy of the monitoring of the winding is improved for the fluctuations of atmospheric fallout or in the fall, if you change the sound of the signal of the electromagnetic vibration.

Functionality of the keruvannya system

To the basic settings of the remote control, turn on the light lamp from the outside. Well, if you bought a lamp or a chandelier today, then in it you can turn on not all attachments, like in the best lamps, but only a singing segment.

Which type of connection In the singing segment, the lamps help not only to save electricity, but also help to get ready for sleep in the evening. Yakshcho do not need to be greedy with the full intensity of the streams of light, you will also need wine.

You can easily change the lighting of the room to the appropriate raven for you. Krіm zvuchaynykh nashtuvan svіtla, in modern control systems it is possible to remain memorized or to fix the function of illumination, which vibudovuєtsya for you. This function is more convenient in the future: you will not need to constantly adjust the light, the wart once program the remote control on a kіlka еtapіv zruchnogo patern for you.

Remember the attachment for the help of the new dimmer, which is a building trivaly hour to save the indication of setting the keruvannya.

Yakshcho in your sir є is a small ditin, a post -a -pipe with a remote control, he has a post -one, de ї was overwhelmed, the bailshosti of the novelty is Svitlovi signaling, yaki pre -maga to know. To activate the mode, it is enough to activate the contact of the radio transmission of the sound signal.

Characteristics of a standard vimicach

The majority of depressions have a functional skin control system that has its own unique characteristics. The leather maker of his gadget is stunned by the growth of attachments, which is not the same as guessing other models and being unique in his family. But in today's realities, it is even more important that the virobnichiy market is teeming with a great assortment of products, and unification can secure the trivality of support from the side of enthusiasts.

Standard remote control may have technical characteristics:

• Peak pressure up to 12 ml.
• The range of operating frequencies ranges from 450 to 900 megahertz.
• Approximately the intensity of commutation is between 300 watts and 6 kilowatts.
• In case of trivality, spratsovuvannya in the case of residential accommodation is no more than 40 to 500 meters.

When choosing a lighting system with a remote control, pay attention to the intensity of the transmission and reception of the signal. Vіd tsikh parametіv zalezhatimy vіdstan active keruvannya. At what pressure is the transmission vvazhaetsya by the main characteristic, in view of the stale practice of the annex, the rіven shvidkodії and the strangeness of the system.

Replacement of lighting for the help of a smartphone

You have ventured into buying a new chandelier with a remote control, to show respect that you have a remote control of the light from your smartphone. The principle of the robot is similar to the standard vimikach b, it’s better to synchronize data transfer with a mobile device on your phone and override the activation code. It seems simpler, replace the remote control and win your smartphone.

The advantages of this type of management are efficiency, so as a special program is installed on the phone, the management will be asked in a few times for the great display of that yoga of possibilities.

It is possible to vicorate different types of programs - to vicoristize attachments not like the volume of light, regulate the tension and intensity of light. The principle of work is simple, the transmission of commands is carried out for the support of a radio receiving signal as a coded support for a textual form.

To the minuses of this type of management, you can see those that the body of the smartphone is broken with additional metal parts, which can lead to serious alarms.

Connecting the system before lighting

The principle of connection of a remote system of keruvannya can be planted in a fallow type like a dzherel of light, as if it would be victorious.

If the connection is to be made with lamps of standard heating, installation is carried out according to the scheme of a standard connection of the simplest vimikacha.

Most of the control panels are sold in sets with lamps and luminaires of the light type, or LED-lamps with energy-saving function. Connecting this type of lamp may have some nuances.

So that the installation of the windows was successful, and as a result, you took away a safe and correct lighting system, it is necessary to think over the organization of a complete living. Vimikachi remote character is to blame for mounting the yakomoga closer to the dzherel of light. Golovne - ensuring good contact between details and the presence of a stable voltage supply.

If you have plans for a lighting system for the yard or garden, and if you want to use them for an additional remote outbuilding, when choosing, give priority to the tight radio devices, as they can exchange signals in the range of 200 meters.

To change the different parameters, such as brightness or the frequency of flashing and other light-emitting lighting, lances of the outer elements due to the faulty buti-selection on the basis of the conductor transistors.

If the connection is not only for an additional remote control system, but, for example, voice commands are played, then the connection of the system can be on the premises of a typical vimikacha for the presence of an additional cable of life.

See the remote care

Assortment, which promotes the virobnik, is majestic. Different parameters are introduced: tension, range, etc. When choosing, it is necessary to clearly indicate your needs and choose the vimikach for yourself.

Іsnuyu raznі vidi distantіynogo cheruvannya:

• Drotov and bezdrotov.
• Automatic or manual.

Behind the type of signals, which are selected for processing commands, which are controlled: infrared, radio frequency, voice, micro-wave, ultrasonic.

The wide-width sensors for lighting control were built up, as they are found in areas of infrequent permutation of people, such as a corridor, a toilet, a bath, street lanes, etc. The most popular is the infrared sensor.

Connecting this type of sensor is not difficult, you can find a typical installation diagram on the Internet. For whom you need a three-wire wire of a sufficient comrade to cross. The zero wires of the electric line, the sensor and the lamp are connected at once, one of the phases is connected to the phase on the sensor, and the other - to the 1st remaining wire.